Closes#14697
Why I did it
When using the dpkg cache feature, debians referenced under SONIC_ONLINE_DEBS always get downloaded, even if the expected debian package already exists under target/. The runs contrary to the design of Makefiles (where presence of the output file indicates it is already built).
This is also counter to the behavior of the SONiC build when dpkg cache is not enabled, causing further confusion.
This behavior also causes problems when doing local development, where we may want to modify the local debian files when evaluating which changes to push to the HTTP repository storing them (Artifactory). With the current behavior, our local changes are always overwritten.
Work item tracking
Microsoft ADO (number only):
How I did it
The SONIC_ONLINE_DEBS rule now skips downloading debians if they already exist under target/.
How to verify it
Populate target/ with locally modified debian packages. Perform the build. Ensure the local modifications remain intact, and are not overwritten.
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
DEPENDS: #12852
Why I did it
To support BGP pending FIB suppression.
How I did it
I backported patches from FRR 8.4 feature that allows communicating ASIC route status back to FRR.
Also, added a new field in DEVICE_METADATA YANG model table. Added UT for YANG model changes.
How to verify it
Run on the switch.
Install python-redis package to docker containers
#### Why I did it
This this bug: https://github.com/sonic-net/sonic-buildimage/issues/14531
The 'flush_unused_database' is part of docker-database, and docker-database does not install python-redis package by itself. it's using redis installed by sonic-py-swsssdk.
So after remove sonic-py-swsssdk from container, this script break.
To this this bug and avoid similer bug happen again, install python-redis to docker containers which removed sonic-py-swsssdk .
#### How I did it
Install python-redis to containers.
#### How to verify it
Pass all UT.
Create new UT to cover this scenario: https://github.com/sonic-net/sonic-mgmt/pull/8032
#### Description for the changelog
Improve sudo cat command for RO user.
Open
[minigraph] add support for changing T1 ports speed from 400G to 100G and vice-versa
#14505
vdahiya12 wants to merge 9 commits into sonic-net:master from vdahiya12:dev/vdahiya/minigraph_parser
Conversation 10
Commits 9
Checks 18
Files changed 5
Conversation
vdahiya12
@vdahiya12 vdahiya12 commented 2 weeks ago •
On SONiC T1 cisco 8101 HwSku, the speed changes are done from 400G to 100G needs to be supported on 400G ports.
To enable this, along with speed change the port lanes need to be changed. This PR has the changes to update the port lanes when such speed change happens.
Basically if Banwidth in minigraph.xml intends to enable a 100G speed on a 400G port, then the appropriate lane change and speed change needs to be invoked in mingraph parser
Example if port_config.ini dicatates the speed to be 400G and minigraph has 100G speed, then this changeneeds to be accommodated
# name lanes alias index speed channel
Ethernet96 1536,1537,1538,1539,1540,1541,1542,1543 etp12 12 400000 0
<DeviceLinkBase>
<ElementType>DeviceInterfaceLink</ElementType>
<EndDevice>ARISTA01T2</EndDevice>
<EndPort>Ethernet1</EndPort>
<StartDevice>Device-8101-01</StartDevice>
<StartPort>etp12</StartPort>
<Bandwidth>100000</Bandwidth>
</DeviceLinkBase>
These platforms today have 400g port with 8 serdes lines, and 100g will operate with 4 serdes lane. When the port speed changes from 400G to 100G the first 4 lanes will be used for 100G port.
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
This is done because when there is a default value, we mount to this path, and this creates this folder on the host.
#### Why I did it
Fix issue that running without overwriting SECURE_UPGRADE_DEV_SIGNING_KEY and SECURE_UPGRADE_DEV_SIGNING_CERT dummy folders are being created on the host.
#### How I did it
Removed the default assignment to SECURE_UPGRADE_DEV_SIGNING_KEY and SECURE_UPGRADE_DEV_SIGNING_CERT
#### How to verify it
Build SONiC using your own prod script
#### Why I did it
Threshold is a new config field passed to telelemetry.go as parameter
#### How I did it
Add check for threshold
#### How to verify it
Modify telemetry.sh, systemctl restart telemetry, telemetry process has threshold of 100
Part of sonic-net/sonic-utilities#2760
Similar to #14295
- Why I did it
To clear teamd timer when fast-reboot is finalized to prevent any further affect.
- How I did it
Deleted teamd timer from config-db in fast-reboot finalizer.
config save call is moved to after clearing teamd-timer so it won't have any further affect as well.
- How to verify it
Verified manually that entry was deleted after fast-reboot was finailized.
rasdaemon is a tool to log hardware errors. It takes 100% CPU during
boot for a few seconds. It impacts fast/warm boot by delaying control
plane restoration for 5 sec on some platforms.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Update golang version for telemetry build in sonic-slave-buster to fix https://security-tracker.debian.org/tracker/CVE-2021-33195, this PR will be merged into 202012 branch finally.
#### Why I did it
Go before 1.15.13 and 1.16.x before 1.16.5 has functions for DNS lookups that do not validate replies from DNS servers, and thus a return value may contain an unsafe injection (e.g., XSS) that does not conform to the RFC1035 format. Now in 201911 and 202012 branch we're using 1.14.2
##### Work item tracking
- Microsoft ADO **(number only)**:17727291
#### How I did it
Bump golang version into 1.15.15 which contains corresponding fix.
#### How to verify it
unit test to do sanity check.
Update golang version for telemetry build in sonic-slave-jessie to fix CVE-2021-33195, this PR will be merged into 201911 branch finally.
#### Why I did it
Go before 1.15.13 and 1.16.x before 1.16.5 has functions for DNS lookups that do not validate replies from DNS servers, and thus a return value may contain an unsafe injection (e.g., XSS) that does not conform to the RFC1035 format. Now in 201911 and 202012 branch we're using 1.14.2
##### Work item tracking
- Microsoft ADO **(number only)**:17727291
#### How I did it
Bump golang version into 1.15.15 which contains corresponding fix.
#### How to verify it
unit test to do sanity check.
* Fix backend port channels and routes being displayed
In `show interface portchannel` and `show ip route`, backend port
channels and routes were being displayed. This is due to changes in #13660.
Fix these issues by switching to reading from PORTCHANNEL_MEMBERS table
instead.
Fixes#14459.
* Replace table name with constant
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
Package Marvell/Innovium CLI shell.
- How I did it
Include shell packages.
- How to verify it
Platform specific shell commands.
Signed-off-by: rck-innovium rck@innovium.com
- Why I did it
Facilitate Automatic integration of new hw-mgmt version into SONiC.
Inputs to the Script:
MLNX_HW_MANAGEMENT_VERSION Eg: 7.0040.5202
CREATE_BRANCH: (y|n) Creates a branch instead of a commit (optional, default: n)
BRANCH_SONIC: Only relevant when CREATE_BRANCH is y. Default: master.
Note: These should be provided through SONIC_OVERRIDE_BUILD_VARS parameter
Output:
Script creates a commit (in each of sonic-buildimage, sonic-linux-kernel) with all the changes required for upgrading the hw-management version to a version provided by MLNX_HW_MANAGEMENT_VERSION
Brief Summary of the changes made:
MLNX_HW_MANAGEMENT_VERSION flag in the hw-management.mk file
hw-mgmt submodule is updated to the corresponding version
Updates are made to non-upstream-patches/patches and series.patch file
series, kconfig-inclusion and kconfig-exclusion files can be updated in the sonic-linux-kernel repo
sonic-linux-kernel/patches folder is updated with the corresponding upstream patches
Based on the inputs, there could be a branch seen in the local for each of the repo's. Branch is named as <branch>_<parent_commit>_integrate_<hw_mgmt_version>
- How I did it
Added a new make target which can be invoked by calling make integrate-mlnx-hw-mgmt
user@server:/sonic-buildimage$ git rev-parse --abbrev-ref HEAD
master_23193446a_integrate_7.0020.5052
user@server:/sonic-buildimage$ git log --oneline -n 2
f66e01867 (HEAD -> master_23193446a_integrate_V.7.0020.5052, show) Intgerate HW-MGMT V.7.0020.5052 Changes
23193446a (master_intg_hw_mgmt) Update logic
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git rev-parse --abbrev-ref HEAD
master_6847319_integrate_7.0020.4104
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git log --oneline -n 2
6094f71 (HEAD -> master_6847319_integrate_V.7.0020.5052) Intgerate HW-MGMT V.7.0020.5052 Changes
6847319 (origin/master, origin/HEAD) Read ID register for optoe1 to find pageable bit in optoe driver (#308)
Changes made will be summarized under sonic-buildimage/integrate-mlnx-hw-mgmt_user.out file. Debugging and troubleshooting output is written to sonic-buildimage/integrate-mlnx-hw-mgmt.log files
User output file & stdout file:
log_files.tar.gz
Limitations:
Assumes the changes would only work for amd64
Assumes the non-upstream patches in mellanox only belong to hw-mgmt
- How to verify it
Build the Kernel
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
#### Why I did it
Implementing code changes for https://github.com/sonic-net/SONiC/pull/1203
#### How I did it
Removed the timers and delayed target since the delayed services would start based on event driven approach.
Cleared port table during config reload and cold reboot scenario.
Modified yang model, init_cfg.json to change has_timer to delayed
#### How to verify it
Running regression
Includes the common debian files that we always want to include.
This mitigates but does not fully solve #7683 as it
could be more files that are ignored by this default rule.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Why I did it
Fixes#14179
chassis-packet: missing arp entries for static routes causing high orchagent cpu usage
It is observed that some sonic-mgmt test case calls sonic-clear arp, which clears the static arp entries as well. Orchagent or arp_update process does not try to resolve the missing arp entries after clear.
How I did it
arp_update should resolve the missing arp/ndp static route
entries. Added code to check for missing entries and try ping if any
found to resolve it.
How to verify it
After boot or config reload, check ipv4 and ipv4 neigh entries to make sure all static route entries are present
manual validation:
Use sonic-clear arp and sonic-clear ndp to clear all neighbor entries
run arp_update
Check for neigh entries. All entries should be present.
Testing on T0 setup route/for test_static_route.py
The test set the STATIC_ROUTE entry in conifg db without ifname:
sonic-db-cli CONFIG_DB hmset 'STATIC_ROUTE|2.2.2.0/24' nexthop 192.168.0.18,192.168.0.25,192.168.0.23
"STATIC_ROUTE": {
"2.2.2.0/24": {
"nexthop": "192.168.0.18,192.168.0.25,192.168.0.23"
}
},
Validate that the arp_update gets the proper ARP_UPDATE_VARDS using arp_update_vars.j2 template from config db and does not crash:
{ "switch_type": "", "interface": "", "pc_interface" : "PortChannel101 PortChannel102 PortChannel103 PortChannel104 ", "vlan_sub_interface": "", "vlan" : "Vlan1000", "static_route_nexthops": "192.168.0.18 192.168.0.25 192.168.0.23 ", "static_route_ifnames": "" }
validate route/test_static_route.py testcase pass.
Why I did it
Support to add SONiC OS Version in device info.
It will be used to display the version info in the SONiC command "show version". The version is used to do the FIPS certification. We do not do the FIPS certification on a specific release, but on the SONiC OS Version.
SONiC Software Version: SONiC.master-13812.218661-7d94c0c28
SONiC OS Version: 11
Distribution: Debian 11.6
Kernel: 5.10.0-18-2-amd64
How I did it
Why I did it
Optimize the version control for Debian packages.
Fix sonic-slave-buster/sources.list.amd64 not found display issue, need to generate the file before running the shell command to evaluate the sonic image tag.
When using the snapshot mirror, it is not necessary to update the version file based on the base image. It will reduce the version dependency issue, when an image is not run when freezing the version.
How I did it
Not to update the version file when snapshot mirror enabled.
How to verify it
Why I did it
Fix#14081
By default DOCKER_BUILDKIT is enabled after docker version 23.0.0
So we need to disable it explicitly if SONIC_USE_DOCKER_BUILDKIT is not set.
Otherwise it will produce larger installable images.
How I did it
set DOCKER_BUILDKIT=0 in slave.mk
How to verify it
Why I did it
refine reproducible build.
How I did it
Fix reset map variable in bash.
Ignore empty web file md5sum value.
If web file didn't backup in azure storage, use file on web.
How to verify i
- Why I did it
Currently, non upstream patches are applied only after upstream patches.
Depends on sonic-net/sonic-linux-kernel#313. Can be merged in any order, preferably together
- What I did it
Non upstream Patches that reside in the sonic repo will not be saved in a tar file bur rather in a folder pointed out by EXTERNAL_KERNEL_PATCH_LOC. This is to make changes to the non upstream patches easily traceable.
The build variable name is also updated to INCLUDE_EXTERNAL_PATCHES
Files/folders expected under EXTERNAL_KERNEL_PATCH_LOC
EXTERNAL_KERNEL_PATCH_LOC/
├──── patches/
├── 0001-xxxxx.patch
├── 0001-yyyyyyyy.patch
├── .............
├──── series.patch
series.patch should contain a diff that is applied on the sonic-linux-kernel/patch/series file. The diff should include all the non-upstream patches.
How to verify it
Build the Kernel and verified if all the patches are applied properly
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Enable the reproducible build for PR build for master branch
Fix the reproducible build variable display error in the slave container.
The below config is none, although the config is set and takes effect.
"SONIC_VERSION_CONTROL_COMPONENTS": "none"
How I did it
Passing the variable through the slave container command line.
The variable has been passed to the slave container and the other docker container by a config file, it is only used to display the value during the build.
How to verify it
See https://dev.azure.com/mssonic/build/_build/results?buildId=247960&view=logs&j=88ce9a53-729c-5fa9-7b6e-3d98f2488e3f&t=88f376cf-c35d-5783-0a48-9ad83a873284
"SONIC_VERSION_CONTROL_COMPONENTS": "deb,py2,py3,web,git,docker"
Why I did it
We don't use snapshots of debian mirrors for sonic-slave containers even if MIRROR_SNAPSHOT is enabled.
How I did it
Export MIRROR_SNAPSHOT in Makefile.work to generate sources.list for sonic-slave containers using debian snapshot mirror
How to verify it
- Why I did it
To solve an issue with upgrade with fast-reboot including FW upgrade which has been introduced since moving to fast-reboot over warm-reboot infrastructure.
As well, this introduces fast-reboot finalizing logic to determine fast-reboot is done.
- How I did it
Added logic to finalize-warmboot script to handle fast-reboot as well, this makes sense as using fast-reboot over warm-reboot this script will be invoked. The script will clear fast-reboot entry from state-db instead of previous implementation that relied on timer. The timer could expire in some scenarios between fast-reboot finished causing fallback to cold-reboot and possible crashes.
As well this PR updates all services/scripts reading fast-reboot state-db entry to look for the updated value representing fast-reboot is active.
- How to verify it
Run fast-reboot and check that fast-reboot entry exists in state-db right after startup and being cleared as warm-reboot is finalized and not due to a timer.
#### Why I did it
Enhance the error message output mechanism during swss docker creating
#### How I did it
Capture the output to stderr of `sonic-cfggen` and output it using `echo` to make sure the error message will be logged in syslog.
#### How to verify it
Manually test
#### Why I did it
When removing port from LAG while traffic is running thorough LAG there is traffic disruption of 60 seconds.
Fix issue https://github.com/sonic-net/sonic-buildimage/issues/14381
#### How I did it
The patch I added introduces "port_removing" op and call it right before Kernel is asked to remove the port.
Implement the op in LACP runner to disable the port which leads to proper LACPDU send.
#### How to verify it
Set LAG between 2 switches.
Set LAGs to be router port and set ip address.
In switch A send ping to ip address of LAG in switch B.
In switch B, while ping is running remove port from LAG.
Verify ping is not stopping.
