* Update minigraph.py to filter out front-panel ports that are not active
* Update cfggen tests to reflect new behavior
Signed-off-by: Danny Allen <daall@microsoft.com>
* Incorporate PR comments
- Update t0 tests to include additional device neighbors
- Refactor xml parsing logic
This commit adds NTP support for management VRF using L3mdev. Config vrf add
mgmt will enable management VRF, enslave the eth0 device to the master device
mgmt, stop ntp service in default, restart interfaces-configs and restart ntp
service in mgmt-vrf context. Requirement and design are covered in mgmt vrf
design document.
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
This piece of information is currently not used. Revert this
pull request in the future to add back the default mirror
session information into the configuration database.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* [minigraph.py] generate mandatory default port description
Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
* use port name as default description
* [config-engine] update test exaple output
Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
* [minigraph.py] use alias/port name as default description instead of neighbor data
Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
By default, port channel members and VLAN members are set to admin
status UP. This configuration could be updated via the command:
config interface <interface_name> startup/shutdown
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
- Move front panel ports and port channels MTU and IP configurations out of
the current /etc/network/interfaces file and store them in the configuration
database.
- The default MTU value for both front panel ports and the port channels is
9100. They are set via the minigraph or 9100 by default.
- Introduce portmgrd which will pick up the MTU configurations from the
configuration database.
- The updated intfmgrd will pick up IP address changes from the configuration
database.
- Update sonic-swss submodule
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* Fix minigraph parser issue when handling LAG related ACL table configuration
* rephrase the warning message.
* pick up swss change in https://github.com/Azure/sonic-swss/pull/494
* Add noise config for PortChannel & EthernetInterface in simple-sample-graph.xml
* Add noise config for PORTCHANNEL_INTERFACE in simple-sample-graph.xml
Signed-off-by: Wenda <wenni@microsoft.com>
* Add noice config for DEVICE_NEIGHBOR in t0-sample-graph.xml
Add unit test against introducing ports not existing in port_config.ini
into DEVICE_NEIGHBOR
Signed-off-by: Wenda <wenni@microsoft.com>
* DeviceInterfaceLink in minigraph.xml can contain port not existing in
port_config.ini but contraining non-zero Bandwidth attribute
Add noice config in simple-sample-graph.xml to capture the case that
such a port is leaked into config_db.json
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect PORTCHANNEL from ports not existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect PORTCHANNEL_INTERFACE from portchannels containing ports not
existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect DEVICE_NEIGHBOR from ports not existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Add noise config Ethernet1 in DeviceInterfaceLinks in simple-sample-graph.xml as it is in PortChannel1001
Signed-off-by: Wenda <wenni@microsoft.com>
* Add noise config Ethernet1 in DeviceInterfaceLinks in simple-sample-graph.xml as it is in PortChannel1001
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect PORTCHANNEL from ports not existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect PORTCHANNEL_INTERFACE from portchannels containing ports not
existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect DEVICE_NEIGHBOR from ports not existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Correct space in minigraph.py
Signed-off-by: Wenda <wenni@microsoft.com>
* Does not allow non-port_config.ini port to get into the port list
Signed-off-by: Wenda <wenni@microsoft.com>
* Check PORTCHANNEL against PORT list only if port_config_file exists
Signed-off-by: Wenda <wenni@microsoft.com>
* Correct format
Signed-off-by: Wenda <wenni@microsoft.com>
* print warning when a port coming from DeviceInterfaceLink is not in
port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Change Ethernet1 and 2 to fortyGigE0/1 and 2,respectively
Signed-off-by: Wenda <wenni@microsoft.com>
* Change Ethernet1 and 2 to fortyGigE0/1 and 2,respectively
Signed-off-by: Wenda <wenni@microsoft.com>
* print warning when ignoring ports, portchannels, portchannel interfaces, and
device neighbors
Update t0-sample-graph.xml with interface name 'fortyGigE0/2' and the
ACL_TABLE output
Signed-off-by: Wenda <wenni@microsoft.com>
* Fix minigraph parser issue when handling LAG related ACL table configuration
Changes to be committed:
modified: src/sonic-config-engine/minigraph.py
modified: src/sonic-config-engine/tests/test_cfggen.py
signed-off-by kebol@mellanox.com
* [libteam] Add fallback support for single-member-port LAG
* Allow the port to be selected if the LAG is configured
with fallback and port is in defaulted state due to missing
LACP PDUs from remote end
* Only enable port if LAG is admin up and the member port
is link up
* [team] Add lacp fallback config to teamd.j2 template
* [teamd] Resolve config conflict between fallback and minlink
* Remove min_link config if fallback is configured
* Add support for fallback config in minigraph
* [teamd] Only enable fallback if it is single-member-port LAG
Signed-off-by: Haiyang Zheng <haiyang.z@alibaba-inc.com>
* [teamd] Removing the admin status check in lacp_port_link_update
Will submit another pull request to fix this issue.
Signed-off-by: Haiyang Zheng <haiyang.z@alibaba-inc.com>
* Final code-drop for interface-description and interface-status enhancements.
Here i'm adding minor extensions to support "show interface description" command. Please refer to PR#158 for more details: https://github.com/Azure/sonic-utilities/pull/158
* Add interface-description UT and adjust logic to have 'description' field being optional
RB=
G=lnos-reviewers
R=ntrianta,rjonnadu,rmolina,sfardeen,zxu
A=
* Updating reference to sonic-utilities to collect latest changes
* Add support for vlanconfd and intfconfd
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Change name to vlanmgrd and intfmgrd
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Add missing vlan_members for parse_dpg result
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Remove cfgmgr debug CLI from image
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Update swss and swss-common submodules for VLAN trunk support
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* [acl-loader]: acl-loader integration.
acl-loader was inplemented based on translate_acl source code. acl-loader
can't be tested with unittest. Same testcases will be covered with testbed tests.
- Remove translate_acl utility and tests.
- Remove mirror template.
- Do not run ACL rules and mirror configuration generators.
- Adopt minigraph parser to work with acl-loader.
* Update sonic-swss-common and sonic-swss submodules.
Enable ACL dynamic config feature.
* Update sonic-utilities submodule.
Include fix for acl-loader incremental update command.
* [sonic-cfggen]: Add test for everflow cfggen configuration.
Move port_config.ini related parsing code out of minigraph.py and create an independent portconfig.py.
Add support to multiple optional fields according to Porting Guide
This field contains all neighbor devices information using the device
hostname as the key and having lo_addr, mgmt_addr, hwsku, type as the
attributes.
Move the file msn27xx.32ports.buffers.json.j2 from sonic-swss repository to
this repository so that we could add unit test for this file.
Unit test is added for platform ACS-MSN2700.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* RR client support in minigraph for FRR
* Fix python warning from previous rrclient commit and move config handling to a more relevant place for this cmd
* Add config support for nhopself, keepalive and holdtime timers.
* Add route-map to prefer global nexthops for ebgp learned prefixes.
* [DHCP Relay]: Support new <DhcpRelays> minigraph tag; support multiple VLANs
* Don't start dhcrelay in quiet mode so as to get startup output in syslog
* Update sonic-cfggen tests to support new '<DhcpRelays>' tag
* <DhcpRelays> tag is only present for VLANs which require a DHCP relay agent -- only parse if present
* Don't attempt to configure a DHCP relay agent for VLANs without specified DHCP servers
* Modify to work with Taoyu's minigraph/DB changes (#942)
* Reduce number of DHCP servers in sonic-cfggen unit tests from 4 to 2
* Remove isc-dhcp-relay sample output file from sonic-cfggen test, as we no longer generate that file
* Update Option 82 isc-dhcp-relay patch to load all interface name-alias maps into memory once at start instead of calling sonic-cfggen on each packet we relay
* Remove executable permission from Jinja2 template
* Set max hop count to 1 so that DHCP relay will only relay packets with a hop count of zero
* Replace tabs with spaces
* Modify overlooked sonic-cfggen call, use Config DB instead of minigraph
* Also ensure > 1 VLAN requires a DHCP relay agent before outputting to template
* Generate port name-alias map file using sonic-cfggen and parse that in lieu of parsing port_config.ini directly
* No longer drop packets with hop count > 0; Instead, drop packets which already contain agent info
The current DEVICE_NEIGHBOR format doesn't support multiple different
ports connecting with same neighbor. Thus the lldpd.conf file is not
generated correctly, causing missing information for LAG members.
This fix reverts the data structure in the previous version of
minigraph parser - using local port as the key and remote port/device
as the value of the map. Sample format is:
DEVICE_NEIGHBOR['Ethernet124'] = {
'name': 'ARISTA04T1',
'port': 'Ethernet1/1'
}
The corresponding unit test in test_cfggen is updated.
Add one more unit test for lldpd.conf.j2 verification.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Modify minigraph parser output format so it fit DB schema
Modify configuration templates to fit new schema
Systemd services dependencies are modified so database starts before any configuration consumer
[swss]: Generate config files for Everflow and IPinIP from minigraph
- Add Everflow DST IP to minigraph file
- Extend minigraph.py to support Everflow
- Add templates file for Everflow and IPinIP configuration
- Add config.sh for swss docker to generate config files
- Add -p --port-config option to feed sonic-cfggen with port_config.ini
file when necessary.
- Update minigraph.py file to accept the -p option
- Add test_j2files.py test to test config.sh and all .j2 templates
* Currently test_teamd is added to test both the config.sh and teamd.j2
file works well with the t0 sample minigraph and sample port config
file
* The sample output is added to the folder sample_output for comparison
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
- minigraph_portchannel_interfaces and minigraph_vlan_interfaces are lists
of interfaces and the name could duplicate due to multiple IPs
- Add minigraph_portchannels and minigraph_vlans dictionaries to support
querying port channels and vlans via the name
- Update teamd.j2 template and config.sh file in docker-teamd
- Update zebra.conf.j2 template to add port channel interfaces
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
* [files]: Add allow-hotplug stanza to interfaces files
- start interface <interface_name> when the kernel detects
a hotplug event from the interface
ref: https://www.debian.org/doc/manuals/debian-reference/ch05.en.html
* [interfaces]: Combine vlan_interfaces and lag_interfaces file and add allow-hotplug
1. Remove vlan_interfaces and lag_interfaces file and members in teamd.j2
2. Add all interfaces to /etc/network/interfaces file
3. Add allow-hotplug stanza
4. Add up <command> to automatically add interfaces to VLAN and LAG
5. Add unique_name filter to minigraph.py to remove duplicate interface names
6. Add brctl to base image
7. Update sonic-swss submodule
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
( All device-specific files now reside under /device directory in a <vendor-name>/<platform-string>/<hardware-SKU> directory structure in repo.
* Device-specific files are now packaged into a Debian package (sonic-device-data) and are now installed to /usr/share/sonic/device/<platform-string>/<hardware-SKU>/ directory on switch.
Add a sonic-config-engine to help generate config file based on minigraph and other data on runtime. Modify fpm, teamd, lldp, snmp, and platform-monitor docker to use sonic-config-engine to generate config in docker upon load.
