Why I did it
For route registry service, in order to block hijacked routes, IBGP session needs to be set up from BGP sentinel service to SONiC, and BGP sentinel service advertise the same route with higher local-preference and no export community. So that SONiC takes the route from BGP sentinel as the best path and does not advertise the route to EBGP peers.
In order to do that, new route-maps are needed. So this change adds a new set of templates, keeping BGPSentinel peers out of the other templates.
Work item tracking
Microsoft ADO (number only): 24451346
How I did it
Add sentinel_community in constants.yml, route from BGPSentinel do not match this community will be denied.
Add support to convert BGPSentinel related configuration in the BGPPeerPassive element of the minigraph to a new BGP_SENTINELS table in CONFIG_DB
Add a new set of "sentinels" templates to docker-fpm-frr
Add a new BGP peer manager to bgpcfgd, to add neighbors from the BGP_SENTINELS table using the "sentinels" templates
Add a test case for minigraph.py, making sure the BGPSentinel and BGPSentinelV6 elements create BGP_SENTINELS DB entry.
Add a set of test cases for the new sentinels templates in sonic-bgpcfgd tests.
Add sonic-bgp-sentinel.yang and a set of testcases for the yang file.
How to verify it
Testcases and UT newly added would pass.
Setup IPv4 and IPv6 BGPSentinel services in minigraph, and load minigraph, show CONFIG_DB and "show runningconfig bgp", configuration would be loaded successfully.
Using t1-lag topo and setup IBGP session from BGPSentinel to SONiC loopback address, IBGP session would up.
Advertise route from BGPSentinel to T1 with sentinel_community, higher local-preference and no-export communiyt. In T1, show bgp route, the result is "Not advertise to any EBGP peer".
Withdraw the route in BGPSentinel, in T1, route would advertise to EBGP peers.
Advertise route from T1 that does not match sentinel_community, in T1, would not see the route in show bgp route.
Upgrade celery in the python3 to 5.2.7,
Upgrade ipython to 8.12.2 since 5.4.1 requires prompt-toolkit<2.0.0,>=1.0.4,
But celery 5.2.7 relies click-repl>=0.2.0 , click-repl>=0.2.0 relies prompt-toolkit>=3.0.36.
So upgrade ipython to resolve the prompt-toolkit version incompatible issue.
Why I did it
Fix the armhf build failure.
How to reproduce the issue:
docker run -it debain:bullseye bash
apt-get update && apt-get install -y python3-pip
pip3 install PyYAML==5.4.1
Error message:
Collecting PyYAML==5.4.1
Installing build dependencies ... done
Getting requirements to build wheel ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 /tmp/tmp6xabslgb_in_process.py get_requires_for_build_wheel /tmp/tmp_er01ztl
....
raise AttributeError(attr)
AttributeError: cython_sources
----------------------------------------
WARNING: Discarding d63f2d7597/PyYAML-5.4.1.tar.gz (sha256)=607774cbba28732bfa802b54baa7484215f530991055bb562efbed5b2f20a45e (from https://pypi.org/simple/pyyaml/) (requires-python:>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*, !=3.5.*). Command errored out with exit status 1: /usr/bin/python3 /tmp/tmp6xabslgb_in_process.py get_requires_for_build_wheel /tmp/tmp_er01ztl Check the logs for full command output.
ERROR: Could not find a version that satisfies the requirement PyYAML==5.4.1
ERROR: No matching distribution found for PyYAML==5.4.1
root@fa2fa92edcfd:/#
But if adding the option --no-build-isolation, then it is good, see fix.
install "PyYAML==5.4.1" --no-build-isolation
The same error can be found in the multiple builds.
Work item tracking
Microsoft ADO (number only): 24567457
How I did it
Add a build option --no-build-isolation.
#### Why I did it
The testcases in sonic-mgmt need the packages of protobuf and dashapi
##### Work item tracking
- Microsoft ADO **(number only)**:
#### How I did it
Because the docker of sonic-mgmt is based on ubuntu20.04, it cannot directly install the packages compiled by slave due to dependency issues. Download related packaged directly from Azp.
#### How to verify it
Check azp stats.
This is primarily to fix a bug in scapy hitting an error when trying to
listen on multiple interfaces in a single `sniff` call. This also
upgrades it to the current latest version.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
It is to fix the docker-ptf-sai build failure.
https://dev.azure.com/mssonic/build/_build/results?buildId=311315&view=logs&j=cef3d8a9-152e-5193-620b-567dc18af272&t=cf595088-5c84-5cf1-9d7e-03331f31d795
2023-07-09T13:53:19.9025355Z �[91mTraceback (most recent call last):
2023-07-09T13:53:19.9025715Z File "/root/ptf/.eggs/setuptools_scm-7.1.0-py3.7.egg/setuptools_scm/_entrypoints.py", line 74, in <module>
2023-07-09T13:53:19.9025933Z from importlib.metadata import entry_points # type: ignore
2023-07-09T13:53:19.9026167Z ModuleNotFoundError: No module named 'importlib.metadata'
Work item tracking
Microsoft ADO (number only): 24513583
How I did it
How to verify it
Modify snmpd.conf to start snmpd to listen on specific management and loopback ips instead of listening on any ip.
#### Why I did it
SNMP over IPv6 is not working for all scenarios for a single asic platforms.
The expectation is that SNMP query over IPv6 should work over Management or Loopback0 addresses.
**Specific scenario where this issue is seen**
In case of Lab T0 device, when SNMP request is sent from a directly connected T1 neighbor over Loopback IP, SNMP response was not received.
This was because the SRC IP address in SNMP response was not Loopback IP, it was the PortChannel IP connected to the neighboring device.
```
23:18:51.620897 In 22:26:27:e6:e0:07 ethertype IPv6 (0x86dd), length 105: fc00::72.41725 > **fc00:1::32**.161: C="msft" **GetRequest**(28) .1.3.6.1.2.1.1.1.0
23:18:51.621441 Out 28:99:3a:a0:97:30 ethertype IPv6 (0x86dd), length 241: **fc00::71**.161 > fc00::72.41725: C="msft" **GetResponse**(162) .1.3.6.1.2.1.1.1.0="SONiC Software Version: SONiC.xxx - HwSku: xx - Distribution: Debian 10.13 - Kernel: 4.19.0-12-2-amd64"
```
In case of IPv4, the SRC IP in SNMP response was correctly set to Loopback IP.
```
23:25:32.769712 In 22:26:27:e6:e0:07 ethertype IPv4 (0x0800), length 85: 10.0.0.57.56701 > **10.1.0.32**.161: C="msft" **GetRequest**(28) .1.3.6.1.2.1.1.1.0
23:25:32.975967 Out 28:99:3a:a0:97:30 ethertype IPv4 (0x0800), length 221: **10.1.0.32**.161 > 10.0.0.57.56701: C="msft" **GetResponse**(162) .1.3.6.1.2.1.1.1.0="SONiC Software Version: SONiC.xxx - HwSku: xx - Distribution: Debian 10.13 - Kernel: 4.19.0-12-2-amd64"
```
**Sequence of SNMP request and response**
1. SNMP request will be sent with SRC IP fc00::72 DST IP fc00:1::32
2. SNMP request is received at SONiC device is sent to snmpd which is listening on port 161 :::161/
3. snmpd process will parse the request create a response and sent to DST IP fc00::72.
snmpd process does not track the DST IP on which the SNMP request was received, which in this case is Loopback IP.
snmpd process will only keep track what is tht IP to which the response should be sent to.
4. snmpd process will send the response packet.
5. Kernel will do a route look up on destination IP and find the best path.
ip -6 route get fc00::72
fc00::72 from :: dev PortChannel101 proto kernel src fc00::71 metric 256 pref medium
5. Using the "src" ip from about, the response is sent out. This SRC ip is that of the PortChannel and not the device Loopback IP.
The same issue is seen when SNMP query is sent from a remote server over Management IP.
SONiC device eth0 --------- Remote server
SNMP request comes with SRC IP <Remote_server> DST IP <Mgmt IP>
If kernel finds best route to Remote_server_IP is via BGP neighbors, then it will send the response via front-panel interface with SRC IP as Loopback IP instead of Management IP.
Main issue is that in case of IPv6, snmpd ignores the IP address to which SNMP request was sent, in case of IPv6.
In case of IPv4, snmpd keeps track of DST IP of SNMP request, it will keep track if the SNMP request was sent to mgmt IP or Loopback IP.
Later, this IP is used in ipi_spec_dst as SRC IP which helps kernel to find the route based on DST IP using the right SRC IP.
https://github.com/net-snmp/net-snmp/blob/master/snmplib/transports/snmpUDPBaseDomain.c#L300
ipi.ipi_spec_dst.s_addr = srcip->s_addr
Reference: https://man7.org/linux/man-pages/man7/ip.7.html
```
If IP_PKTINFO is passed to sendmsg(2)
and ipi_spec_dst is not zero, then it is used as the local
source address for the routing table lookup and for
setting up IP source route options. When ipi_ifindex is
not zero, the primary local address of the interface
specified by the index overwrites ipi_spec_dst for the
routing table lookup.
```
**This issue is not seen on multi-asic platform, why?**
on multi-asic platform, there exists different network namespaces.
SNMP docker with snmpd process runs on host namespace.
Management interface belongs to host namespace.
Loopback0 is configured on asic namespaces.
Additional inforamtion on how the packet coming over Loopback IP reaches snmpd process running on host namespace: https://github.com/sonic-net/sonic-buildimage/pull/5420
Because of this separation of network namespaces, the route lookup of destination IP is confined to routing table of specific namespace where packet is received.
if packet is received over management interface, SNMP response also is sent out of management interface. Same goes with packet received over Loopback Ip.
##### Work item tracking
- Microsoft ADO **17537063**:
#### How I did it
Have snmpd listen on specific Management and Loopback IPs specifically instead of listening on any IP for single-asic platform.
Before Fix
```
admin@xx:~$ sudo netstat -tulnp | grep 161
udp 0 0 0.0.0.0:161 0.0.0.0:* 15631/snmpd
udp6 0 0 :::161 :::* 15631/snmpd
```
After fix
```
admin@device:~$ sudo netstat -tulnp | grep 161
udp 0 0 10.1.0.32:161 0.0.0.0:* 215899/snmpd
udp 0 0 10.3.1.1:161 0.0.0.0:* 215899/snmpd
udp6 0 0 fc00:1::32:161 :::* 215899/snmpd
udp6 0 0 fc00:2::32:161 :::* 215899/snmpd
```
**How this change helps with the issue?**
To see snmpd trace logs, modify snmpd to start using the below parameters, in supervisord.conf file
```
/usr/sbin/snmpd -f -LS0-7i -Lf /var/log/snmpd.log
```
When snmpd listens on any IP, snmpd binds to IPv4 and IPv6 sockets as below:
```
netsnmp_udpbase: binding socket: 7 to UDP: [0.0.0.0]:0->[0.0.0.0]:161
trace: netsnmp_udp6_transport_bind(): transports/snmpUDPIPv6Domain.c, 303:
netsnmp_udpbase: binding socket: 8 to UDP/IPv6: [::]:161
```
When IPv4 response is sent, it goes out of fd 7 and IPv6 response goes out of fd 8.
When IPv6 response is sent, it does not have the right SRC IP and it can lead to the issue described.
When snmpd listens on specific Loopback/Management IPs, snmpd binds to different sockets:
```
trace: netsnmp_udpipv4base_transport_bind(): transports/snmpUDPIPv4BaseDomain.c, 207:
netsnmp_udpbase: binding socket: 7 to UDP: [0.0.0.0]:0->[10.250.0.101]:161
trace: netsnmp_udpipv4base_transport_bind(): transports/snmpUDPIPv4BaseDomain.c, 207:
netsnmp_udpbase: binding socket: 8 to UDP: [0.0.0.0]:0->[10.1.0.32]:161
trace: netsnmp_register_agent_nsap(): snmp_agent.c, 1261:
netsnmp_register_agent_nsap: fd 8
netsnmp_udpbase: binding socket: 10 to UDP/IPv6: [fc00:1::32]:161
trace: netsnmp_register_agent_nsap(): snmp_agent.c, 1261:
netsnmp_register_agent_nsap: fd 10
netsnmp_ipv6: fmtaddr: t = (nil), data = 0x7fffed4c85d0, len = 28
trace: netsnmp_udp6_transport_bind(): transports/snmpUDPIPv6Domain.c, 303:
netsnmp_udpbase: binding socket: 9 to UDP/IPv6: [fc00:2::32]:161
```
When SNMP request comes in via Loopback IPv4, SNMP response is sent out of fd 8
```
trace: netsnmp_udpbase_send(): transports/snmpUDPBaseDomain.c, 511:
netsnmp_udp: send 170 bytes from 0x5581f2fbe30a to UDP: [10.0.0.33]:46089->[10.1.0.32]:161 on fd 8
```
When SNMP request comes in via Loopback IPv6, SNMP response is sent out of fd 10
```
netsnmp_ipv6: fmtaddr: t = (nil), data = 0x5581f2fc2ff0, len = 28
trace: netsnmp_udp6_send(): transports/snmpUDPIPv6Domain.c, 164:
netsnmp_udp6: send 170 bytes from 0x5581f2fbe30a to UDP/IPv6: [fc00::42]:43750 on fd 10
```
#### How to verify it
Verified on single asic and multi-asic devices.
Single asic SNMP query with Loopback
```
ARISTA01T1#bash snmpget -v2c -c xxx 10.1.0.32 1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: SONiC Software Version: SONiC.xx - HwSku: Arista-7260xx - Distribution: Debian 10.13 - Kernel: 4.19.0-12-2-amd64
ARISTA01T1#bash snmpget -v2c -c xxx fc00:1::32 1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: SONiC Software Version: SONiC.xx - HwSku: Arista-7260xxx - Distribution: Debian 10.13 - Kernel: 4.19.0-12-2-amd64
```
On multi-asic -- no change.
```
sudo netstat -tulnp | grep 161
udp 0 0 0.0.0.0:161 0.0.0.0:* 17978/snmpd
udp6 0 0 :::161 :::* 17978/snmpd
```
Query result using Loopback IP from a directly connected BGP neighbor
```
ARISTA01T2#bash snmpget -v2c -c xxx 10.1.0.32 1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: SONiC Software Version: SONiC.xx - HwSku: xx - Distribution: Debian 9.13 - Kernel: 4.9.0-14-2-amd64
ARISTA01T2#bash snmpget -v2c -c xxx fc00:1::32 1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: SONiC Software Version: SONiC.xx - HwSku: xx - Distribution: Debian 9.13 - Kernel: 4.9.0-14-2-amd64
```
<!--
If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012.
-->
#### Why I did it
After k8s upgrade a container, k8s can only know the container is running, don't know the service's status inside container. So we need a probe inside container, k8s will call the probe to check whether the container is really ready.
##### Work item tracking
- Microsoft ADO **(number only)**: 22453004
#### How I did it
Add a health check probe inside config engine container, the probe will check whether the start service exit normally or not if the start service exists and call the python script to do container self-related specific checks if the script is there. The python script should be implemented by feature owner if it's needed.
more details: [design doc](https://github.com/sonic-net/SONiC/blob/master/doc/kubernetes/health-check.md)
#### How to verify it
Check path /usr/bin/readiness_probe.sh inside container.
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [x] 202205
- [x] 202211
#### Tested branch (Please provide the tested image version)
- [x] 20220531.28
Why I did it
This is part of sonic-mgmt-docker Python3 migration project.
Currently Python3 packages are in the Python3 virtual environment. This PR will add Python3 packages to real file system.
After we migrate all script to use Python3 in real file system, the Python3 venv will be deleted.
After this PR, in sonic-mgmt-docker,
Directly run cmd - pytest will use Python2's version.
python3 -m pytest will use Python3's version.
How I did it
Modify sonic-mgmt-docker j2 script.
How to verify it
Build a private sonic-mgmt-docker and run basic test case with Python3.
Why I did it
To reduce the container's dependency from host system
Work item tracking
Microsoft ADO (number only):
17713469
How I did it
Move the k8s container startup script to config engine container, other than mount it from host.
How to verify it
Check file path(/usr/share/sonic/scripts/container_startup.py) inside config engine container.
Signed-off-by: Yun Li <yunli1@microsoft.com>
Co-authored-by: Qi Luo <qiluo-msft@users.noreply.github.com>
Migrate flush_unused_database from py-redis to sonic-swss-common
#### Why I did it
flush_unused_database using py-redis, but sonic-swss-common already support flushdb, so we need migrate to sonic-swss-common
##### Work item tracking
- Microsoft ADO **(number only)**: 24292565
#### How I did it
Migrate flush_unused_database from py-redis to sonic-swss-common
#### How to verify it
Pass all UT and E2E test
#### Description for the changelog
Migrate flush_unused_database from py-redis to sonic-swss-common
#### Why I did it
To fix the timezone sync issue between the containers and the host. If a certain timezone has been configured on the host (SONIC) then the expectation is to reflect the same across all the containers.
This will fix [Issue:13046](https://github.com/sonic-net/sonic-buildimage/issues/13046).
For instance, a PST timezone has been set on the host and if the user checks the link flap logs (inside the FRR), it shows the UTC timestamp. Ideally, it should be PST.
Why I did it
Current docker-sonic-mgmt build is broken. So below are two fixes which can help in mitigating the same.
PYAML - Download a specific version in python2 as after https://pypi.org/project/pyaml/23.5.5/ there was support only for python3. This update happened on May 5th. And consequently all daily builds after this changes https://dev.azure.com/mssonic/build/_build/results?buildId=266733&view=results (starting build to break) kept failing
Azure-CLI - this can be downloaded by apt-get repository. So modify as an improvement.
Work item tracking
Microsoft ADO (number only): [Build] fix docker-sonic-mgmt build #15567
How I did it
By manually checking the release notes of pyaml and install azure-cli in newly installed docker container using apt-get
How to verify it
You can run below commands to validate:
make configure PLATFORM=generic
make target/docker-sonic-mgmt.gz
Second line would fail without the commit.
#### Why I did it
Need new changes that were added to gnxi inside ptf docker
##### Work item tracking
- Microsoft ADO **(number only)**: 17747466
#### How I did it
Update commit number
#### How to verify it
Pipeline
Add watchdog mechanism to swss service and generate alert when swss have issue.
**Work item tracking**
Microsoft ADO (number only): 16578912
**What I did**
Add orchagent watchdog to monitor and alert orchagent stuck issue.
**Why I did it**
Currently SONiC monit system only monit orchagent process exist or not. If orchagent process stuck and stop processing, current monit can't find and report it.
**How I verified it**
Pass all UT.
Manually test process_monitoring/test_critical_process_monitoring.py can pass.
Add new UT https://github.com/sonic-net/sonic-mgmt/pull/8306 to check watchdog works correctly.
Manually test, after pause orchagent with 'kill -STOP <pid>', check there are warning message exist in log:
Apr 28 23:36:41.504923 vlab-01 ERR swss#supervisor-proc-watchdog-listener: Process 'orchagent' is stuck in namespace 'host' (1.0 minutes).
**Details if related**
Heartbeat message PR: https://github.com/sonic-net/sonic-swss/pull/2737
UT PR: https://github.com/sonic-net/sonic-mgmt/pull/8306
This reverts commit 44427a2f6b.
Docker image not updated during PR validation and caused PR check failures.
Force merge this revert. After cache is updated after this PR is merged, issue should be fixed.
What I did:
Workaround for the issue seen here : FRRouting/frr#13682
It seems there is timing issue where there are multiple recursive lookup needed to resolve nexthop of the route it's possible that it does not happen correctly causing route to remain in inactive state
Issue is seen on chassis-packet as there 2 level of recursive lookup needed for a given e-BGP learnt route
- Level1 to resolve e-BGP peer (connected route via bgp ) over Loopback4096 (i-BGP peering)
- Level 2 Loopback4096 over backend port-channels next-hops
For VOQ chassis there is no e-BGP peer (connected route via bgp ) resolution as route is added as Static route by orchagent over Ethernet-IB.
Also as part of this remove route-map policy from instance.conf.j2 as same is define in peer-group.j2.
Microsoft ADO: https://msazure.visualstudio.com/One/_workitems/edit/24198507
How I verify:
Functional Verification manually
Updated UT.
We will be adding sanity check in sonic-mgmt to make sure none of route are in inactive state.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
This PR depends on https://github.com/sonic-net/sonic-swss/pull/2737 merge first.
**What I did**
Add orchagent watchdog to monitor and alert orchagent stuck issue.
**Why I did it**
Currently SONiC monit system only monit orchagent process exist or not. If orchagent process stuck and stop processing, current monit can't find and report it.
**How I verified it**
Pass all UT.
Add new UT https://github.com/sonic-net/sonic-mgmt/pull/8306 to check watchdog works correctly.
Manually test, after pause orchagent with 'kill -STOP <pid>', check there are warning message exist in log:
Apr 28 23:36:41.504923 vlab-01 ERR swss#supervisor-proc-watchdog-listener: Process 'orchagent' is stuck in namespace 'host' (1.0 minutes).
**Details if related**
Heartbeat message PR: https://github.com/sonic-net/sonic-swss/pull/2737
UT PR: https://github.com/sonic-net/sonic-mgmt/pull/8306
TSA/B/C scripts invoke commands that require root permissions. If the user does not have sudo permissions, the scripts today execute until the command and throw a backtrace with error at the specific command. Added a check to ensure the operations check for root permissions upfront.
* [static_route][staticroutebfd]fix an issue on deleting a non-bfd static route
Fix an issue for deleting a non-bfd static route also remove the staticroutebfd from critical_processes list and make it auto restart in the case of crash.
This script was using 'null' as default value for all optional fields
of REST_SERVER table -- due to incorrect use of 'jq -r' command.
Server was not coming up when REST_SERVER entry exists but some fields
were not given (which is a valid configuration).
Fixed the jq query expression to return empty string for non existing
fields.
Signed-off-by: Sachin Holla <sachin.holla@broadcom.com>
Why I did it
To support BGPMon sessions from each T2 linecard ASIC
Work item tracking
Microsoft ADO (number only): 17873174
How I did it
Added change in BGPMon configuration to use Loopback4096 as source interface, since this has a unique IP per ASIC.
How to verify it
Tested by manually setting up BGPMon session on T2 LC and verified that Loopback4096 could be used as source
What I did:
In FRR command update source <interface-name> is not at address-family level. Because of this
internal peer route-map for ipv6 were getting applied to ipv4 address family. As a result
TSA over iBGP for Ipv6 was not getting applied.
How I verify:
Manual Verification of TSA over both ipv4 and ipv6 after fix works fine.
Updated UT for this.
Added sonic-mgmt test gap: sonic-net/sonic-mgmt#8170
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Why I did it
Supports new field in sonic-net/sonic-gnmi@258b887
Work item tracking
Microsoft ADO (number only): 13468195
How I did it
Add new field in telemetry.sh
How to verify it
Pipeline
Why I did it
Support for SONIC chassis isolation using TSA and un-isolation using TSB from supervisor module
Work item tracking
Microsoft ADO (number only): 17826134
How I did it
When TSA is run on the supervisor, it triggers TSA on each of the linecards using the secure rexec infrastructure introduced in sonic-net/sonic-utilities#2701. User password is requested to allow secure login to linecards through ssh, before execution of TSA/TSB on the linecards
TSA of the chassis withdraws routes from all the external BGP neighbors on each linecard, in order to isolate the entire chassis. No route withdrawal is done from the internal BGP sessions between the linecards to prevent transient drops during internal route deletion. With these changes, complete isolation of a single linecard using TSA will not be possible (a separate CLI/script option will be introduced at a later time to achieve this)
Changes also include no-stats option with TSC for quick retrieval of the current system isolation state
This PR also reverts changes in #11403
How to verify it
These changes have a dependency on sonic-net/sonic-utilities#2701 for testing
Run TSA from supervisor module and ensure transition to Maintenance mode on each linecard
Verify that all routes are withdrawn from eBGP neighbors on all linecards
Run TSB from supervisor module and ensure transition to Normal mode on each linecard
Verify that all routes are re-advertised from eBGP neighbors on all linecards
Run TSC no-stats from supervisor and verify that just the system maintenance state is returned from all linecards
This PR is to add the following
Add a new options "--profile" to the show macsec command, to show all profiles in device
Update the currentl show macsec command, to show profile in each interface o/p. This will tell which macsec profile the interface is attached to.
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
DEPENDS: #12852
Why I did it
To support BGP pending FIB suppression.
How I did it
I backported patches from FRR 8.4 feature that allows communicating ASIC route status back to FRR.
Also, added a new field in DEVICE_METADATA YANG model table. Added UT for YANG model changes.
How to verify it
Run on the switch.
Install python-redis package to docker containers
#### Why I did it
This this bug: https://github.com/sonic-net/sonic-buildimage/issues/14531
The 'flush_unused_database' is part of docker-database, and docker-database does not install python-redis package by itself. it's using redis installed by sonic-py-swsssdk.
So after remove sonic-py-swsssdk from container, this script break.
To this this bug and avoid similer bug happen again, install python-redis to docker containers which removed sonic-py-swsssdk .
#### How I did it
Install python-redis to containers.
#### How to verify it
Pass all UT.
Create new UT to cover this scenario: https://github.com/sonic-net/sonic-mgmt/pull/8032
#### Description for the changelog
Improve sudo cat command for RO user.
#### Why I did it
Threshold is a new config field passed to telelemetry.go as parameter
#### How I did it
Add check for threshold
#### How to verify it
Modify telemetry.sh, systemctl restart telemetry, telemetry process has threshold of 100
#### Why I did it
When CPU is busy, the sonic_ax_impl may not have sufficient speed to handle the notification message sent from REDIS.
Thus, the message will keep stacking in the memory space of sonic_ax_impl.
If the condition continues, the memory usage will keep increasing.
#### How I did it
Add a monit file to check if the SNMP container where sonic_ax_impl resides in use more than 4GB memory.
If yes, restart the sonic_ax_impl process.
#### How to verify it
Run a lot of this command: `while true; do ret=$(redis-cli -n 0 set LLDP_ENTRY_TABLE:test1 test1); sleep 0.1; done;`
And check the memory used by sonic_ax_impl keeps increasing.
After a period, make sure the sonic_ax_impl is restarted when the memory usage reaches the 4GB threshold.
And verify the memory usage of sonic_ax_impl drops down from 4GB.
Change references to use bullseye instead of buster
Why I did it
Almost all daemons in 202211 and master uses bullseye, and sflow was easy to migrate.
How I did it
Replaced the references, built and tested in 202211.
How to verify it
Build with the changes, enable sflow:
admin@sonic:~$ sudo config sflow collector add test 1.2.3.4
admin@sonic:~$ sudo config sflow collector enable
tcpdump on 1.2.3.4 and see that UDP sFlow are being sent.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Change references to use bullseye instead of buster
Why I did it
Almost all daemons in 202211 and master uses bullseye, and NAT seems easy to migrate.
How I did it
Replaced the references, built with 202211 branch.
How to verify it
Not sure, it builds and tests pass as far as I can tell but I don't use the feature myself.
Signed-off-by: Christian Svensson <blue@cmd.nu>
catch system error and log as warning level instead of
error level in case interface was already deleted.
Why I did it
sflow process exited when failed to convert the interface index from interface name
How I did it
Added exception handling code and logged when OSError exception.
How to verify it
Recreated the bug scenario #11437 and ensured that sflow process not exited.
Description for the changelog
catch system error and log as warning level instead of
error level in case interface was already deleted.
Logs
steps :
root@sonic:~# sudo config vlan member del 4094 PortChannel0001
root@sonic:~# sudo config vlan member del 4094 Ethernet2
root@sonic:~# sudo config vlan del 4094
root@sonic:~#
"WARNING sflow#port_index_mapper: no interface with this name" is seen but no crash is reported
syslogs :
Jan 23 09:17:24.420448 sonic NOTICE swss#orchagent: :- removeVlanMember: Remove member Ethernet2 from VLAN Vlan4094 lid:ffe vmid:27000000000a53
Jan 23 09:17:24.420710 sonic NOTICE swss#orchagent: :- flushFdbEntries: flush key: SAI_OBJECT_TYPE_FDB_FLUSH:oid:0x21000000000000, fields: 3
Jan 23 09:17:24.420847 sonic NOTICE swss#orchagent: :- recordFlushFdbEntries: flush key: SAI_OBJECT_TYPE_FDB_FLUSH:oid:0x21000000000000, fields: 3
Jan 23 09:17:24.426082 sonic NOTICE syncd#syncd: :- processFdbFlush: fdb flush succeeded, updating redis database
Jan 23 09:17:24.426242 sonic NOTICE syncd#syncd: :- processFlushEvent: received a flush port fdb event, portVid = oid:0x3a000000000a52, bvId = oid:0x26000000000a51
Jan 23 09:17:24.426374 sonic NOTICE syncd#syncd: :- processFlushEvent: pattern ASIC_STATE:SAI_OBJECT_TYPE_FDB_ENTRY:*oid:0x26000000000a51*, portStr oid:0x3a000000000a52
Jan 23 09:17:24.427104 sonic NOTICE bgp#fpmsyncd: :- onRouteMsg: RouteTable del msg for route with only one nh on eth0/docker0: fe80::/64 :: eth0
Jan 23 09:17:24.427182 sonic NOTICE bgp#fpmsyncd: :- onRouteMsg: RouteTable del msg for route with only one nh on eth0/docker0: fd00::/80 :: docker0
Jan 23 09:17:24.428502 sonic NOTICE swss#orchagent: :- meta_sai_on_fdb_flush_event_consolidated: processing consolidated fdb flush event of type: SAI_FDB_ENTRY_TYPE_DYNAMIC
Jan 23 09:17:24.429058 sonic NOTICE swss#orchagent: :- meta_sai_on_fdb_flush_event_consolidated: fdb flush took 0.000606 sec
Jan 23 09:17:24.431496 sonic NOTICE swss#orchagent: :- setHostIntfsStripTag: Set SAI_HOSTIF_VLAN_TAG_STRIP to host interface: Ethernet2
Jan 23 09:17:24.431675 sonic NOTICE swss#orchagent: :- flushFdbEntries: flush key: SAI_OBJECT_TYPE_FDB_FLUSH:oid:0x21000000000000, fields: 2
Jan 23 09:17:24.431797 sonic NOTICE swss#orchagent: :- recordFlushFdbEntries: flush key: SAI_OBJECT_TYPE_FDB_FLUSH:oid:0x21000000000000, fields: 2
Jan 23 09:17:24.437009 sonic NOTICE swss#orchagent: :- meta_sai_on_fdb_flush_event_consolidated: processing consolidated fdb flush event of type: SAI_FDB_ENTRY_TYPE_DYNAMIC
Jan 23 09:17:24.437532 sonic NOTICE swss#orchagent: :- meta_sai_on_fdb_flush_event_consolidated: fdb flush took 0.000514 sec
Jan 23 09:17:24.437942 sonic NOTICE syncd#syncd: :- processFdbFlush: fdb flush succeeded, updating redis database
Jan 23 09:17:24.438065 sonic NOTICE syncd#syncd: :- processFlushEvent: received a flush port fdb event, portVid = oid:0x3a000000000a52, bvId = oid:0x0
Jan 23 09:17:24.438173 sonic NOTICE syncd#syncd: :- processFlushEvent: pattern ASIC_STATE:SAI_OBJECT_TYPE_FDB_ENTRY:*, portStr oid:0x3a000000000a52
Jan 23 09:17:24.440348 sonic NOTICE swss#orchagent: :- removeBridgePort: Remove bridge port Ethernet2 from default 1Q bridgeJan 23 09:17:29.782554 sonic NOTICE swss#orchagent: :- removeVlan: VLAN Vlan4094 still has 1 FDB entries
Jan 23 09:17:29.791373 sonic WARNING sflow#port_index_mapper: no interface with this name
Signed-off-by: Gokulnath-Raja <Gokulnath_R@dell.com>
Why I did it
Add AZP agent necessary packages to sonic-mgmt-docker
Remove Python 201811 venv
Update some packages in order to meet internal security requirements
How I did it
Update sonic-mgmt-docker file
How to verify it
sonic-mgmt-docker can run: bash, apt update, apt install and ping.
start.sh is under /azp with exec permission.
env-201811 venv is removed.
jinja2 is upgrade to 2.10.1
#### Why I did it
Bug in script that was passing in null as log level value if missing from config_db
#### How I did it
Added more robust conditional statement
#### How to verify it
1) Remove log_level from config db
2) config reload -y
3) telemetry should not crash
- Why I did it
Fixes#14236
When a redis event quickly gets outdated during port breakout, error logs like this are seen
Mar 8 01:43:26.011724 r-leopard-56 INFO ConfigMgmt: Write in DB: {'PORT': {'Ethernet64': {'admin_status': 'down'}, 'Ethernet68': {'admin_status': 'down'}}}
Mar 8 01:43:26.012565 r-leopard-56 INFO ConfigMgmt: Writing in Config DB
Mar 8 01:43:26.013468 r-leopard-56 INFO ConfigMgmt: Write in DB: {'PORT': {'Ethernet64': None, 'Ethernet68': None}, 'INTERFACE': None}
Mar 8 01:43:26.018095 r-leopard-56 NOTICE swss#portmgrd: :- doTask: Configure Ethernet64 admin status to down
Mar 8 01:43:26.018309 r-leopard-56 NOTICE swss#portmgrd: :- doTask: Delete Port: Ethernet64
Mar 8 01:43:26.018641 r-leopard-56 NOTICE lldp#lldpmgrd[32]: :- pops: Miss table key PORT_TABLE:Ethernet64, possibly outdated
Mar 8 01:43:26.018654 r-leopard-56 ERR lldp#lldpmgrd[32]: unknown operation ''
- How I did it
Only log the error when the op is not empty and not one of ("SET" & "DEL" )
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Currently the show and clear cli of dhcp_relayis may cause confusion.
How I did it
Add doc for it: [doc] Add docs for dhcp_relay show/clear cli sonic-utilities#2649
Add dhcp_relay config cli and test cases.
show dhcp_relay ipv4 helper
show dhcp_relay ipv6 destination
show dhcp_relay ipv6 counters
sonic-clear dhcp_relay ipv6 counters
How to verify it
Unit test all passed
It will allow us to have application called "mergecap" - which can merge multiple .pcap files into single .pcapng file and convert it to .pcap file
Signed-off-by: Petro Pikh <petrop@nvidia.com>
#### Why I did it
Remove dialout as critical process as it is no longer used in prod. As part of future work, can remove dialout completely
#### How I did it
Remove from critical process list
Why I did it
DHCPv6 relay config entry is not useful while del dhcpv6 relay config.
How I did it
Remove dhcpv6_relay entry if it is empty and not check entry exist while adding dhcpv6 relay
