With the Broadcom syncd containers getting upgraded to Bullseye, the DNX
RPC container is no longer automatically built. Explicitly add a make
command to build it.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
VoQ chassis supervisor will have Fabric asics and the sub_role for fabric asics will be "Fabric".
The fabric asics namespaces are not being returned in get_all_namespaces() and is required in caclmgrd to add right cacl to allow internal docker traffic from fabric asic namespaces.
test_cacl_application fails on VoQ chassis Supervisor with the error:
Failed: Missing expected iptables rules: set(['-A INPUT -s 240.127.1.1/32 -d 240.127.1.1/32 -j ACCEPT', '-A INPUT -s 240.127.1.3/32 -d 240.127.1.1/32 -j ACCEPT', '-A INPUT -s 240.127.1.2/32 -d 240.127.1.1/32 -j ACCEPT'])
How I did it
Update get_all_namespaces to return fabric namespaces list.
How to verify it
Verified on VoQ chassis.
Why I did it
Migrate FRR to bullseye
How I did it
Makefile and docker config changes to refer to bullseye instead of buster.
How to verify it
Build bullseye frr docker.
Co-authored-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
Why I did it
It solves a swss orchagent crash issue on PikeZ device, due to link-training setting of external PHY port.
How I did it
Catch up the fix for CS00012257483 in version 7.1.7.2.
Change `sxdkernel start` to `sxdkernel restart`. If `syncd` service crashes in `ExecStartPre` systemd will not call `ExecStop` and thus will not call `sxdkernel stop`. Use of `sxdkernel restart` is more robust in terms of guarantees to restore the system after unexpected crashes.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
This new breakout mode is required when a QSFP cable is used on the QSFP-DD supported 4700 port. since QSFP only uses the first 4 lanes, this mode is required to restrict the child ports to only use the first four lanes
- How I did it
Updated the platfrom.json file with the extended data
- How to verify it
Tested on one port:
root@msn-4700:/home/admin# show int status
Interface Lanes Speed MTU FEC Alias Vlan Oper Admin Type Asym PFC
----------- ------------------------------- ------- ----- ----- ------- ------ ------ ------- ----------------------------------------------- ----------
Ethernet0 0 25G 9100 N/A etp1a routed up up QSFP28 or later N/A
Ethernet1 1 25G 9100 N/A etp1b routed down up N/A N/A
Ethernet2 2 25G 9100 N/A etp1c routed down up N/A N/A
Ethernet3 3 25G 9100 N/A etp1d routed down up N/A N/A
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
On a supervisor card in a chassis, syncd/teamd/swss/lldp etc dockers are created for each Switch Fabric card. However, not all chassis would have all the switch fabric cards present. In this case, only dockers for Switch Fabrics present would be created.
The monit 'container_checker' fails in this scenario as it is expecting dockers for all Switch Fabrics (based on NUM_ASIC defined in asic.conf file).
- Why I did it
To update MFT package to the latest version.
- How I did it
Updated MFT_VERSION & MFT_REVISION in platform/mellanox/mft.mk.
- How to verify it
Run regression testing using tests from sonic-mgmt
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
Cherry pick PR ttps://github.com/sonic-net/sonic-buildimage/pull/10996 to 202205 branch
Updating sonic-utilities sub module with the following commits
ca785a2 Remove sonic-db-cli
#### Why I did it
To fix sonic-db-cli high CPU usage on SONiC startup issue: https://github.com/sonic-net/sonic-buildimage/issues/10218
sonic-db-cli re-write with c++ and move to sonic-swss-common repo.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
ca785a2 Remove sonic-db-cli
#### A picture of a cute animal (not mandatory but encouraged)
This was done manually, to try to get past a build error due to changing
package versions in Debian.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* [snmpd]: Update to 5.9+dfsg-4+deb11u1 to match Debian version
This brings in some security fixes.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update snmpd makefile
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Remove binNMU for snmpd
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Update the bcm config file system_ref_core_clock_khz param to
handlesystems with J2cplus linecards.
We need system_ref_core_clock_khz to be set to 1600000 for supporting j2
and j2cplus linecards on the same chassis.
Why I did it
Update SDK/FW version - 4.5.2318/2010_2318 to pick up new fixes:
Cr space timeout on Hold and Release GW - at warm boot
SPC-1 Port in stuck PHY_UP after peer side rebooted
memory leak in sx_api_router_ecmp_update_set
How I did it
update the make file with the new version number
update submodule Switch-SDK-drivers pointer
How to verify it
run sonic regression
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did:
In case of multi-asic platforms gbsyncd is not getting added to Feature Table of Host Config DB. Without this container_checker complains of not needed gbsyncd container's are running.
How I did:
Update Both Host and Namespace config db when gbsyncd docker is starting.
How I verify:
Verified on Multi-asic platforms.
Signed-off-by: maipbui <maibui@microsoft.com>
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
Replace unsafe functions to safe functions
#### How I did it
Replace `strtok()` by `strtok_r()`
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
This PR is to update Yang model for pfc_enable and pfcwd_sw_enable fields to support more than 2 queues, like 2,3,4,6.
Before this change, the regex "[0-7](,[0-7])?" accepts only no more than 2 queues.
How I did it
Update the regex pattern for pfc_enable and pfcwd_sw_enable, from "[0-7](,[0-7])?" to "[0-7](,[0-7])*
How to verify it
The change is verified by UT. The test input is updated to cover the change.
collected 3 items
tests/test_sonic_yang_models.py .. [ 66%]
tests/yang_model_tests/test_yang_model.py .
bgp should be a per-asic service, and runs for each namespace on
multi-asic platforms. However, putting bgp in MULTI_INST_DEPENDENT
causes swss to be restarted as well as bgp. this is causing issues after #11000
Issue: #11653
This fix:
removes bgp from dependents list
adds a conditional that either adds bgp, or bgp@$DEV to separate
between single and multi-asic platforms
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
Generate the port configuration required 400G ZR port from minigraph.
How I did it
Add parse logic to get tx_power and laser_freq from LinkMetadata section of the minigraph.
Add UT for packet-chassis and voq chassis
How to verify it
UT
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
SN5600 has an additional service interface with a different parameters than other interfaces.
- How I did it
Added the etp65 interface with the correct parameters.
- How to verify it
Run platform test on SN5600 platform.
Check the service port can startup correctly.
Cherry pick PR https://github.com/sonic-net/sonic-buildimage/pull/10825 to 202205 branch
#### Why I did it
Fix sonic-db-cli high CPU usage on SONiC startup issue: https://github.com/sonic-net/sonic-buildimage/issues/10218
ETA of this issue will be 2022/05/31
#### How I did it
Re-write sonic-cli with c++ in sonic-swss-common: https://github.com/sonic-net/sonic-swss-common/pull/607
Modify swss-common rules and slave.mk to install c++ version sonic-db-cli.
#### How to verify it
Pass all E2E test scenario.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
Build and install c++ version sonic-db-cli from swss-common.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
utilities:
* fbf82b9 2022-08-08 | Fix the issue that sonic_platform is not installed on vs image (#2300) (HEAD -> 202205, github/202205) [Stephen Sun]
* 19a3540 2022-08-13 | Revert "Revert "Improve the way to check port type of RJ45 port (#2249)"" [Ying Xie]
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Fix docker-database flush_unused_database failed issue: https://github.com/Azure/sonic-buildimage/issues/11597
When change flush_unused_database from use swsssdk to use swsscommon, get_instancelist() and get_dblist() name changed but not update.
Change flush_unused_database code to use swsscommon API:
Change get_instancelist to getInstanceList.
Change get_dblist to getDbList.
Pass all E2E test.
Manually check syslog make sure error log not exist and swss, syncd, bgp service started.
Search code in Azure make sure there all similer case are fixed in this PR.
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
Fix docker-database flush_unused_database failed issue: https://github.com/Azure/sonic-buildimage/issues/11597
When change flush_unused_database from use swsssdk to use swsscommon, get_instancelist() and get_dblist() name changed but not update.
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
At SWSS docker init time, check the device subtype and enable tunnel packet handler only if it is dualtor
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
In arp_update, check for FAILED or INCOMPLETE kernel neighbor entries and manually ping them to try and resolve the neighbor
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
When using trap on SIGTERM the script will not react to the SIGTERM signal sent while a child is executing.
I.e, the following script does not react on SIGTERM sent to it if it is
waiting for sleep to finish:
```
trap "echo Handled SIGTERM" 0 2 3 15
echo "Before sleep"
sleep inf
echo "After sleep"
```
Instead, trap only on EXIT which covers also a scenario with exit on
SIGINT, SIGTERM.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
2 things are missing in current allow-prefix list implementation.
In some usecase, need to tell the BGP neighbor and have different allow-prefix list for different neighbors, which is not supported.
for the prefix list, can't support flexible le and ge.
How I did it
To enhance the bgp allow-prefix list feature to have:
To include the neighbor type info for the allow-prefix list.
To support flexible le and ge length for allow-prefix list.
How to verify it
4 new unit test cases are added in this PR to cover changes.
- Why I did it
New SKU for MSN-4700 Platform i.e. Mellanox-SN4700-C128
Requirements:
* Breakout: Port 1-32: 4x100G
* Downlinks: 120 (1-30)
* Uplinks: 8 (31-32)
* Shared Headroom: Enabled
* Over Subscribe Ratio: 1:8
* Default Topology: T2
* Default Cable Length for T2: 1500m
* QoS params: The default ones defined in qos_config.j2 will be applied
* Small Packet Percentage: Used 50% for traditional buffer model Note: For dynamic model, the value defined in LOSSLESS_TRAFFIC_PATTERN|AZURE|small_packet_percentage is used
Additional Details:
Switch Type has to be programmed as SpineRouter through config_db.json in DEVICE_METADATA|localhost|type field for the buffer values & cable lengths defined in the buffers_defaults_t2.j2 to apply on the device
Cable Lengths Used for generating buffer_defaults_{t0,t1,t2}.j2 values
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Update HW-MGMT to V.7.0020.3006
1. Support new system SN2201
2. Add COMEX BRDWL respin support
- How I did it
Update the version number of the makefile
Advance the hw-mgmt submodule pointer
- How to verify it
Run full regression on Nvidia platforms
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Add support for reacting to speed change between 40G and 100G in CONFIG_DB
Fix a bug on optical bit setting.
Avoid the random error in shutdown for issue: aristanetworks/sonic#40
Avoid to run on SmartsvilleBkMs, which depends on a different driver (credo-sai).
How I did it
How to verify it
Verified on the duts that the commands printed in the log are matching the expectation and the interfaces are up.
