#### Why I did it
src/sonic-ztp
```
* 739470d - (HEAD -> master, origin/master, origin/HEAD) [ZTP] 'config reload' use -f to avoid system checks (#52) (4 hours ago) [Peter Yu]
* 04cd8e8 - [ZTP] bufsize=1 not supported in binary mode (#51) (4 hours ago) [Peter Yu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Improve per-command authorization performance by read passwd entry with getpwent.
#### Why I did it
Currently per-command authorization will check if user is remote user with getpwnam API, which will trigger tacplus-nss for authentication with TACACS server.
But this is not necessary because when user login the user information already add to local passwd file.
Use getpwent API can directly read from passwd file, this will improve per-command authorization performance.
##### Work item tracking
- Microsoft ADO: 25104723
#### How I did it
Improve per-command authorization performance by read passwd entry with getpwent.
#### How to verify it
Pass all UT.
### Description for the changelog
Improve per-command authorization performance by read passwd entry with getpwent.
#### Why I did it
src/sonic-gnmi
```
* 8e13400 - (HEAD -> master, origin/master, origin/HEAD) Fix random build failures due to sonic_internal.proto (#157) (3 days ago) [Sachin Holla]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-restapi
```
* c8fa96b - (HEAD -> master, origin/master, origin/HEAD) Remove command to install libhiredis deb file (#146) (23 hours ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Openssh in Debian Bullseye has been updated to 1:8.4p1-5+deb11u2 to fix CVE-2023-38408.
Since we're building openssh with some patches, we need to update our version as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
What I did:
Make Sure for internal iBGP we are one-hop away (directly connected) by using Generic TTL security mechanism.
Why I did:
Without this change it's possible on packet chassis i-BGP can be established even if there no direct connection. Below is the example
- Let's say we have 3 LC's LC1/LC2/LC3 each having i-BGP session session with each other over Loopback4096
- Each LC's have static route towards other LC's Loopback4096 to establish i-BGP session
- LC1 learn default route 0.0.0.0/0 from it's e-BGP peers and send it over to LC2 and LC3 over i-BGP
- Now for some reason on LC2 static route towards LC3 is removed/not-present/some-issue we expect i-BGP session should go down between LC2 and LC3
- However i-BGP between LC2 and LC3 does not go down because of feature ip nht-resolve-via-default where LC2 will use default route to reach Loopback4096 of LC3. As it's using default route BGP packets from LC2 towards LC3 will first route to LC1 and then go to LC3 from there.
Above scenario can result in packet mis-forwarding on data plane
How I fixed it:-
To make sure BGP packets between i-BGP peers are not going with extra routing hop enable using GTSM feature
neighbor PEER ttl-security hops NUMBER
This command enforces Generalized TTL Security Mechanism (GTSM), as specified in RFC 5082. With this command, only neighbors that are the specified number of hops away will be allowed to become neighbors. This command is mutually exclusive with ebgp-multihop.
We set hop count as 1 which makes FRR to reject BGP connection if we receive BGP packets if it's TTL < 255. Also setting this attribute make sure i-BGP frames are originated with IP TTL of 255.
How I verify:
Manual Verification of above scenario. See blow BGP packets receive with IP TTL 254 (additional routing hop) we are seeing FIN TCP flags as BGP is rejecting the connection
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
- Why I did it
To simplify usability and increase adoption of the sFlow + dropmon feature without rebuilding an image.
- How I did it
Remove the ENABLE_SFLOW_DROPMON compilation flag, and remove unnecessary patches.
- How to verify it
1. Configure the sFlow on the switch
2. Configure the Host (PTF)
3. Launch the sflowtool on Host (PTF)
4. Send the dropped packets from Host (PTF) to the switch via scapy
5. Check the L3 counters on the switch
6. Check the samples that were captured by the sflowtool on the Host (PTF)
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
#### Why I did it
src/sonic-linux-kernel
```
* d5232ab - (HEAD -> master, origin/master, origin/HEAD) arm64: ac5: Fix watchdog timeleft (#334) (7 days ago) [pavannaregundi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 91e7a27a - (HEAD -> master, origin/master, origin/HEAD) [buffers] Add handler for the 'create_only_config_db_buffers' configuration knob (#2883) (11 hours ago) [Vadym Hlushko]
* 7f7bc33d - Do not set internal port count to the PortConfigDone DB value. (#2910) (34 hours ago) [mint570]
* d0f1108b - [muxorch] Reorder the neighbor disable operations (#2917) (2 days ago) [Longxiang Lyu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/linkmgrd
```
* f34cb09 - (HEAD -> master, origin/master, origin/HEAD) [warmboot] config all interfaces back to `auto` if reconciliation times out (#220) (8 hours ago) [Jing Zhang]
```
#### How I did it
#### How to verify it
#### Description for the changelog
* [buffers] Add create_only_config_db_buffers.json for MLNX devices (not MSFT SKU), inject it at the start of the swss docker
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
* [buffers] Align the sonic-device_metadata.yang
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
---------
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Created patches to address two CVEs from FRR CVE-2023-41358 and CVE-2023-38802.
Patch FRR commit CVE fixed
0024-bgpd-Do-not-process-NLRIs-if-the-attribute-length-is.patch FRRouting/frr@f291f1e CVE-2023-41358
0025-bgpd-Use-treat-as-withdraw-for-tunnel-encapsulation-.patch FRRouting/frr@8a4a88c CVE-2023-38802
previously, get_num_asics() returns the maximum number of asics. however, the asic_count
should be actual number of asics populated which can be get from get_asic_presence_list().
ADO: 25158825
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
src/sonic-linux-kernel
```
* ecba611 - (HEAD -> master, origin/master, origin/HEAD) arm64: Enable CONFIG_KEXEC_FILE (#333) (6 hours ago) [pavannaregundi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-gnmi
```
* cbb7631 - (HEAD -> master, origin/master, origin/HEAD) Debug grpc to fetch subscribe preferences of a path (#130) (6 hours ago) [Sachin Holla]
* 099ff7c - Remove command to install libhiredis deb file (#151) (9 hours ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-mgmt-common
```
* 42ca0a6 - (HEAD -> master, origin/master, origin/HEAD) DB Access Layer Merges: GetTablePattern ... (#103) (10 hours ago) [a-barboza]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 45547e66 - (HEAD -> master, origin/master, origin/HEAD) [Buffer Orch] Retry one more time when it fails to set buffer profiles' attributes to SAI (#2890) (11 hours ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss-common
```
* b0f148e - (HEAD -> master, origin/master, origin/HEAD) [chassis][voq] Add fabric monitoring tables definitions. (#808) (10 hours ago) [jfeng-arista]
```
#### How I did it
#### How to verify it
#### Description for the changelog
### Why I did it
##### Work item tracking
- Microsoft ADO **(number only)**:24851367
#### How I did it
Read subscription message when capture service starts, before reading cached events.
#### How to verify it
UT/Manual testing
Microsoft ADO (25266920)
sonic-mgmt xoff test was failing for [100g,120km]. Needed to update total headroom pool size when 100G line card is used as T2 uplink.
This size was calculated assuming 100g is used for downlink so cable length was 2km whereas it can also be used for uplink (cable length - 120km). so we need to do calculation based on 120km not 2km. Although it will be some wastage for 2km scenario but it should cover both cases.
What I did:
Enable Sending BGP Community over internal neighbors over iBGP Session
Microsoft ADO: 25268695
Why I did:
Without this change BGP community send by e-BGP Peers are not carry-forward to other e-BGP peers.
str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64
BGP routing table entry for 20c0:a801::/64, version 52141
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65500
2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
Last update: Tue Sep 26 16:08:26 2023
str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25
BGP routing table entry for 192.168.35.128/25, version 52688
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65502
3.3.3.6 from 3.3.3.6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
Last update: Tue Sep 26 15:45:51 2023
After the change
str2-xxxx-lc2-2(config)# router bgp 65100
str2-xxxx-lc2-2(config-router)# address-family ipv4
str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V4 send-community
str2-xxxx-lc2-2(config-router-af)# exit
str2-xxxx-lc2-2(config-router)# address-family ipv6
str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V6 send-community
str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64
BGP routing table entry for 20c0:a801::/64, version 52400
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65500
2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
**Community: 1111:1111**
Last update: Tue Sep 26 16:10:19 2023
str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25
BGP routing table entry for 192.168.35.128/25, version 52947
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65502
3.3.3.6 from 3.3.3.6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
**Community: 1111:1111**
Last update: Tue Sep 26 16:10:09 2023
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
src/sonic-sairedis
```
* c22b76b - (HEAD -> master, origin/master, origin/HEAD) [VOQ][saidump] Enhance saidump with new option -r to parser the JSON file and displays/format the right output (#1288) (17 hours ago) [JunhongMao]
* 31bd92a - Add log for git revision (#1293) (4 days ago) [Kamil Cudnik]
* edf6597 - [submodule] Update SAI submodule to v1.13 (#1292) (6 days ago) [Kamil Cudnik]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* c63abc0 - (HEAD -> master, origin/master, origin/HEAD) [Credo][Ycable] Remove the thread locker protection from the thread-safe APIs (#388) (21 hours ago) [Xinyu Lin]
```
#### How I did it
#### How to verify it
#### Description for the changelog
vlan import for yang currently doesn't work, so was removed from the original PR: #14521
Adds comments to remember to add later
Signed-off-by: Nikola Dancejic <ndancejic@microsoft.com>
#### Why I did it
src/sonic-host-services
```
* 3022c1b - (HEAD -> master, origin/master, origin/HEAD) Updated the iptable rule to use parent/base name of midplane interface of chassis. (#75) (6 hours ago) [abdosi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
The Makefile for src/sonic-eventd had no clean target, which means build artifacts may incorrectly get reused across builds, when they need to get rebuilt for whatever reason (build environment changed, libraries changed, etc.).
Microsoft ADO (number only): 25135443
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Fix debian files for libnl3 to enable a parallel build.
How to verify it
SONIC_CONFIG_MAKE_JOBS=20
now:
make target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb-clean
make target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb
grep Elapsed target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb.log
Elapsed time: 0h 1m 51s
fixed version:
make target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb-clean
make target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb
grep Elapsed target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb.log
Elapsed time: 0h 0m 22s
#### Why I did it
src/dhcpmon
```
* 7c55e50 - (HEAD -> master, origin/master, origin/HEAD) Merge pull request #13 from jcaiMR/dev/jcai_master_interface_counter (7 days ago) [StormLiangMS]
* 085a087 - refine counting logic (10 days ago) [jcaiMR]
* de96a98 - Merge branch 'master' into dev/jcai_master_interface_counter (11 days ago) [jcaiMR]
* 5cb4468 - dhcp per-interface counter init commit (12 days ago) [jcaiMR]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/dhcprelay
```
* 2b33d76 - (HEAD -> master, origin/master, origin/HEAD) dhcpv6 per interface counter support (#43) (7 days ago) [jcaiMR]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 3d3bc1a - (HEAD -> master, origin/master, origin/HEAD) [Credo][Ycable] Fix for displaying 'N/A' firmware version when NIC endpoint is power off (#366) (2 hours ago) [Xinyu Lin]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-mgmt-common
```
* 4cfc882 - (HEAD -> master, origin/master, origin/HEAD) CVL error reporting enhancements (#97) (5 hours ago) [Sachin Holla]
* 4a88fe7 - transformer infra optimization on uri path unmarshaling (#99) (6 hours ago) [Balachandar Mani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
[staticroutebfd] change bfd to singlehop
staticroutebfd should use singlehop bfd. Because of a bug (portchannel+singlehop) in the SDK, we were using multi-hop as a temporary workaround. Now the SDK issue is solved, need to switch to singlehop BFD mode.
Why I did it
Created patches to address two CVEs from FRR CVE-2023-41359 and CVE-2023-41360.
Patch FRR commit CVE fixed
0022-bgpd-Don-t-read-the-first-byte-of-ORF-header-if-we-a.patch FRRouting/frr@3515178 CVE-2023-41360
0023-bgpd-Make-sure-we-have-enough-data-to-read-two-bytes.patch FRRouting/frr@460ee93 CVE-2023-41359
Work item tracking
Microsoft ADO (number only):
How I did it
Porting fixes as patches from FRR.
How to verify it
Azure Pipeline tests should cover the sanity. In addition ran basic tests.
In #15080, there was a command added to re-add 127.0.0.1/8 to the lo
interface when the networking configuration is being brought down.
However, the trigger for that command is `down`, which, looking at
ifupdown2 configuration files, runs immediately after 127.0.0.1/16 is
removed. This means there may be a period of time where there are no
loopback addresses assigned to the lo interface, and redis commands will
fail.
Fix this by changing this to pre-down, which should run well before
127.0.0.1/16 is removed, and should always leave lo with a loopback
address.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
src/sonic-mgmt-common
```
* 14962fe - (HEAD -> master, origin/master, origin/HEAD) CVL database access layer changes (#100) (30 hours ago) [Balachandar Mani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-host-services
```
* 1a5a0bf - (HEAD -> master, origin/master, origin/HEAD) Remove command to install libhiredis deb file (#74) (8 hours ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 0dafb55 - (HEAD -> master, origin/master, origin/HEAD) Remove command to install libhiredis deb file (#398) (9 hours ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Write error message to syslog when add user failed or connect to TACACS server failed.
#### Why I did it
With these messages, we can downgrade TACACS server with issue to lower priority.
##### Work item tracking
- Microsoft ADO: 24667696
#### How I did it
Write error message to syslog when add user failed or connect to TACACS server failed.
#### How to verify it
Pass all UT.
Manually verify error message generated.
### Description for the changelog
Write error message to syslog when add user failed or connect to TACACS server failed.
#### Why I did it
src/sonic-mgmt-common
```
* ee3029d - (HEAD -> master, origin/master, origin/HEAD) DB Access Layer Merges: (#96) (11 hours ago) [a-barboza]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-linux-kernel
```
* fa40db7 - (HEAD -> master, origin/master, origin/HEAD) Change the system.map file permission only readable by root (#329) (21 hours ago) [xumia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-gnmi
```
* 6fd461c - (HEAD -> master, origin/master, origin/HEAD) Get origin from prefix (#149) (17 hours ago) [ganglv]
```
#### How I did it
#### How to verify it
#### Description for the changelog
* Change the CAK key length check in config plugin, macsec test profile changes
* Fix the format in add_profile api
The changes needed in various macsec unit tests and config plugin when we move to accept the type 7 encoded key format for macsec. This goes along with PR : sonic-net/sonic-swss#2892 raised earlier.
### Why I did it
We're not adding any patch on top of hiredis, and there's no apparent reason to build this. Remove the build step here, and just install the package from the Debian repos.
##### Work item tracking
- Microsoft ADO **(number only)**: 24381590
#### How to verify it
Build the SONiC image, and load it. Verify that services come up.
Why I did it
There is no reason to build deb package ethtool from source code.
We can install the same version from Debian bullseye mirror.
How I did it
Remove ethtool Makefiles from sonic-buildimage.
Install ethtool via apt-get in pmon container.
#### Why I did it
src/sonic-linux-kernel
```
* 7ee50c9 - (HEAD -> master, origin/master, origin/HEAD) [Mellanox] Upstream kernel patches with HW-MGMT 7.0030.1011 (#327) (29 hours ago) [Kebo Liu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-daemons
```
* c1c43f6 - (HEAD -> master, origin/master, origin/HEAD) [pmon][chassis][voq] Chassis DB cleanup when module is down (#394) (2 days ago) [vganesan-nokia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Fixes#15803
In SONiC chassis, routes have recursive nexthop resolution when the routes are learnt from remote linecard.
In some cases after recursive nexthop resolution the number of nexthop for a route could reach 256.
Zebra ran out of space when filling up 256 nexthops which causes zebra crash.
Work item tracking
Microsoft ADO (24997365):
How I did it
Create a patch to port FRRouting/frr#14096 which has change to ignore duplicate nexthop when filling up fpm message
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
#### Why I did it
src/sonic-linux-kernel
```
* 1800d11 - (HEAD -> master, origin/master, origin/HEAD) AMD-Pensando ELBA SOC support (#322) (23 hours ago) [Ashwin Hiranniah]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-snmpagent
```
* af2d5a4 - (HEAD -> master, origin/master, origin/HEAD) Fix FdbUpdater crash when SAI_FDB_ENTRY_ATTR_BRIDGE_PORT_ID attribute missing. (#286) (19 hours ago) [Hua Liu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
How I did it
Fix the regex for L4 port range in openconfig_acl.py.
How to verify it
Build image and install on Arista-720DT DUT, then try the repro steps in #16189 and confirmed the ACL rule be setup correctly:
Why I did it
Add no-export to bgp sentinel community-list. So that bgp updates from bgp sentinel service must match sentinel community and no-export, otherwise, the bgp update will be dropped.
Work item tracking
Microsoft ADO (24946274):
How I did it
Add no-export to bgp sentinel community-list.
How to verify it
Run UT, case would pass. Build the image and start the device. Add bgp sentinel and check that no-export community exist in bgp sentinel community list.
#### Why I did it
To support SKIP_BUILD_HOOK for curl command so the targets downloaded by curl (SONIC_ONLINE_DEBS, SONIC_ONLINE_FILES) can utilize it.
##### Work item tracking
- Microsoft ADO **(number only)**:
#### How I did it
Add a logic to invoke a real command instead of a `download_packages()` (the same way it's done for wget)
#### How to verify it
Add an online target (with URL attribute).
Add the "SKIP_VERSION=y" to this target.
Check that download_packages is not invoked.
Add yang model for IPv4 DHCP Server.
Add four new tables: DHCP_SERVER_IPV4, DHCP_SERVER_IPV4_CUSTOMIZED_OPTIONS, DHCP_SERVER_IPV4_RANGE, DHCP_SERVER_IPV4_PORT
Bmc is a valid neighbor type in minigraph, however it was missing from the YANG model definition. Usually, the Bmc type device can be neighbor of BmcMgmtToRRouter. This PR is to introduce this type.
Why I did it
According to ACL-Table-Type-HLD, the value type of MATCHES, ACTIONS and BIND_POINTS should be list instead of string. Opening this PR to update the definition of BMCDATA and BMCDATAV6.
How I did it
Update the definition of BMCDATA and BMCDATAV6 in minigraph-parser.
How to verify it
Verified by UT and build SONiC image.
How I did it
Update Yang definition of ACL_TABLE_TYPE.
Update existing testcase.
Add new testcase to cover lowercase key scenario.
How to verify it
Verified by building sonic_yang_models-1.0-py3-none-any.whl. While building the target package, unit tests were run and passed.
- Why I did it
Fixed build failure when flag ENABLE_SFLOW_DROPMON=y set
- How I did it
Fixed sflow dropmon patch to align with hsflowd version 2.0.45
Signed-off-by: rajkumar38 <rpennadamram@marvell.com>
#### Why I did it
src/sonic-gnmi
```
* 7a1b7cd - (HEAD -> master, origin/master, origin/HEAD) Improve full path logic (#146) (37 minutes ago) [ganglv]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-linux-kernel
```
* a2aa335 - (HEAD -> master, origin/master, origin/HEAD) PATCH] net: allow user to set metric on default route learned via Router Advertisement (#326) (12 hours ago) [abdosi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
### Why I did it
When PFC WD is triggered there is no diagnosis information which makes it difficult to understand why PFC WD was triggered. So, we add a field `additional_information` to accommodate the diagnosis information.
### How to verify it
unit test
How I did it
Update Yang definition of IN_PORTS and OUT_PORTS to string.
Since we cannot split the string with comma (,) and validate each substring is a valid SONiC port name. The only restriction for them is must be a string.
How to verify it
Verified by building sonic_yang_models-1.0-py3-none-any.whl. While building the target package, unit tests were run and passed.
Build a SONiC image based on 202205 branch and installed on physical DUT. Re try the steps in [Yang] Incorrect definition of IN_PORTS and OUT_PORTS in sonic-acl.yang #16190 and can see below success response:
#### Why I did it
src/dhcpmon
```
* a3c5381 - (HEAD -> master, origin/master, origin/HEAD) Merge pull request #11 from jcaiMR/dev/jcai_fix_err_log (12 hours ago) [StormLiangMS]
* ab78a31 - Merge branch 'master' into dev/jcai_fix_err_log (4 days ago) [jcaiMR]
* 5314b72 - remove unnessary log message in case too many log output (5 days ago) [jcaiMR]
* 01f4fa7 - fix build issue (5 days ago) [jcaiMR]
* c2fbb34 - fix format issue (5 days ago) [jcaiMR]
* 79b6720 - fix a notification message format issue (6 days ago) [jcaiMR]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-gnmi
```
* ac94807 - (HEAD -> master, origin/master, origin/HEAD) Support get all with json (#145) (19 hours ago) [ganglv]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Few commands in multiasic platforms when run with the "sudo ip netns exec asic0 " option was taking like 15 mins to get the o/p. This behavior of sudo getting hung was seen by just doing this
jujoseph@svcstr-server-2:~ sudo ip netns exec asic0 bash
jujoseph@svcstr-server-2:~ sudo ls
deally sudo is not needed as we have /bin/ip netns identify present in /etc/sudoers file. Hence removing it
#### Why I did it
src/sonic-utilities
```
* 5b492d54 - (HEAD -> master, origin/master, origin/HEAD) [chassis][voq] clear: Fix clear queuecounters to also clear VOQ counters (#2878) (2 days ago) [Patrick MacArthur]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
To overwrite the default DSCP_TO_TC_MAP for tunnel traffic, the attribute sai_tunnel_support must be set to 1.
Before this change, the attribute is set only on dual-tor platform when remap is enabled.
This PR is to set the attribute on all Arista-7260cx3 devices.
Work item tracking
Microsoft ADO 24785776
How I did it
Update the config.bcm template for Arista-7260cx3 devices.
How to verify it
The change is verified by manually rendering the j2 on a T1 testbed.
* Update sairedis submodule
This submodule update needs to be manually done due to build changes
done in the sairedis submodule. Specifically, Debian build profiles are
now being used instead of dpkg build targets, and dbgsym packages are
being used instead of dbg packages. Because of this, there needs to be
changes on the sonic-buildimage side for this.
This is a reland of #15720, which was reverted in #15995 due to the RPC
package build failing. That failure has since been fixed, and the
PR pipeline has been updated to build the RPC package so that this is
checked at the PR stage.
This submodule update brings in the following changes:
```
4dbdb21 Fix RPC package build failure due to shell syntax issue (#1268)
588d596 Make sure new binaries replace existing binaries in docker-sonic-vs (#1269)
ce8f642 [vs] Use boost join to concatenate switch types in config (#1266)
d6055a2 [vslib]: Temporaily map DPU switch type to NVDA_MBF2H536C (#1259)
e1cdb4d [CodeQL]: Use dependencies with relevant versions in azp template. (#1262)
c08f9a2 [CI]: Fix collect log error in azp template. (#1260)
eed856c [CodeQL]: Fix syncd compilation in azp template. (#1261)
a3f1f1a Reland 'Make changes to building and packaging sairedis (#1116)' (#1194)
```
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update sairedis submodule with the fix for the RPC package build
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
src/sonic-platform-common
```
* ab70e66 - (HEAD -> master, origin/master, origin/HEAD) Add new SSD type support (#390) (21 hours ago) [Junchao-Mellanox]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 537095c - (HEAD -> master, origin/master, origin/HEAD) Added new RegBitsFields (#391) (32 hours ago) [Prince George]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-daemons
```
* f3c2631 - (HEAD -> master, origin/master, origin/HEAD) Revert pcied enhancements (#392) (28 hours ago) [Ashwin Srinivasan]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 23cb2e50 - (HEAD -> master, origin/master, origin/HEAD) [ASAN] Fix Indirect Mem Leaks in Orchagent (#2869) (10 hours ago) [Vivek]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
#15284 fixes a case of shell escape exploit for TACACS+. This applies to RADIUS as well. RADIUS creates an unconfirmed user locally on the switch while attempting authentication. popen() is used to execute useradd,usermod and userdel commands. This exposes a vulnerability where a tactically designed username (which could contain explicit linux commands) can lead to getting executed as root.
An example of such a username could be "asd";echo>remoteRCE2;#". This leads to remoteRCE2 getting created in "/".
How I did it
All calls to popen() used to execute useradd, usermod and userdel are replaced with fork()/execl().
How to verify it
Prior to the fix, following is the behavior:
[s@i vm] ssh "asd";echo>remoteRCE2;#"@1.1.1.1
asd";echo>remoteRCE2;#@1.1.1.1's password:
Permission denied, please try again.
On the SONiC switch,
root@sonic:/# ls
accton_as7816_monitor.log home lib64 remoteRCE2 sys
bin host libx32 root tmp
boot initrd.img media run usr
cache.tgz initrd.img.old mnt sbin var
dev lib opt sonic vmlinuz
etc lib32 proc srv vmlinuz.old
root@sonic:/# ls -l
With the fix:
[s@i vm] ssh "asd";echo>remoteRCE2;#"@1.1.1.1
asd";echo>remoteRCE2;#@1.1.1.1's password:
Permission denied, please try again.
root@sonic:/# ls
accton_as7816_monitor.log etc lib mnt sbin usr
bin home lib32 opt sonic var
boot host lib64 proc srv vmlinuz
cache.tgz initrd.img libx32 root sys vmlinuz.old
dev initrd.img.old media run tmp
Verified that RADIUS authentication works as expected for valid users as well.
What I did:
Fix the Loopback0 IPv6 address of LC's in chassis not reachable from peer devices.
Why I did:
For Ipv6 Loopback0 address we only advertise /64 subnet to the peer devices. However, in case of chassis each LC will have it own /128 address of that /64 subnet . Since this /128 address does not get advertised peer devices can-not ping/reach the LC's loopback0.
How I fix:
Advertise /128 Loopback0 Ipv6 address only between i-BGP peers. This way even though /64 is advertised to e-BGP peer devices when packet reaches any of LC's it can reach the appropriate LC's.
How I verify:
Manual verification
UT added for same.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
src/sonic-swss-common
```
* be425ed - (HEAD -> master, origin/master, origin/HEAD) [redisCommand]: Not store the error return code of redisFormat (#809) (2 days ago) [Ze Gan]
* 5966d8b - Fix binary serializer can't deserialize protopuf buffer content issue (#810) (3 days ago) [Hua Liu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
8111 800G interface, split to 2x400G (each has 4 lanes) fails to change interface speed from 400G to 100G during deploy mg. In minigraph.xml, the interface speed configuration is good, but fails to generate the right value to config_db.json.
In order to support this SKU the speed transitioning should support both 4 lanes and 8 lanes in the port_config.ini.
Why I did it
before this change for a 400G to 100G transition, in all cases except when lanes are 8, we would continue and the line
ports.setdefault(port_name, {})['speed'] = port_speed_png[port_name]
would not be executed, hence the default speed will never be set for a case and config_db will not be updated,
where speed is transitioning from 400G to 100G or 40G, but lanes are not equal to 8.
In order for those cases to pass where lanes are not specifically 8, we need the change
Work item tracking
24242657
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
### Why I did it
- Hostcfgd is handling a lot of tasks and Feature table is by itself an important and big task which can benefit from separation into a new daemon
- Currently, Hostcfgd handles feature table first before other tables an thus other taska such as Aaa, Ntp are delayed. With the split, they can run in paralell
- After the recent config-reload enhancements, Hostcfgd uses a multi-threading approach to listen to PortInitDone. BY splitting the daemon into two, we can avoid having a separate thread by using SubscriberStateTable and Select,.
#### Note:
Depends on host-services PR : https://github.com/sonic-net/sonic-host-services/pull/71
Once the host-services is merged, updating the submodule along with this PR should fix the CI problem
#### How I did it
Refactor the feature related tasks from hostcfgd into a seperate daemon.
#### How to verify it
UT's and Tested on DUT
```
admin@r-tigris-22:~$ show logging -f | grep featured
Jun 28 22:13:33.870021 r-tigris-22 INFO featured: ConfigDB connect success
Jun 28 22:14:05.638063 r-tigris-22 INFO featured: Updating feature 'radv' systemd config file related to auto-restart ...
Jun 28 22:14:06.169184 r-tigris-22 INFO featured: Feature radv is enabled and started
Jun 28 22:14:06.172343 r-tigris-22 INFO featured: Updating feature 'sflow' systemd config file related to auto-restart ...
Jun 28 22:14:06.844322 r-tigris-22 INFO featured: Feature sflow is stopped and disabled
Jun 28 22:14:06.846761 r-tigris-22 INFO featured: Updating feature 'snmp' systemd config file related to auto-restart ...
Jun 28 22:14:07.129090 r-tigris-22 INFO featured: Feature is snmp delayed for port init
Jun 28 22:14:07.132052 r-tigris-22 INFO featured: Updating feature 'swss' systemd config file related to auto-restart ...
Jun 28 22:14:08.368948 r-tigris-22 INFO featured: Feature swss is enabled and started
Jun 28 22:14:08.369240 r-tigris-22 INFO featured: Updating feature 'syncd' systemd config file related to auto-restart ...
Jun 28 22:14:08.718357 r-tigris-22 INFO featured: Feature syncd is enabled and started
Jun 28 22:14:08.721496 r-tigris-22 INFO featured: Updating feature 'teamd' systemd config file related to auto-restart ...
Jun 28 22:14:09.042495 r-tigris-22 INFO featured: Feature teamd is enabled and started
Jun 28 22:14:09.045441 r-tigris-22 INFO featured: Updating feature 'telemetry' systemd config file related to auto-restart ...
Jun 28 22:14:09.359831 r-tigris-22 INFO featured: Feature is telemetry delayed for port init
Jun 28 22:14:30.740499 r-tigris-22 INFO featured: Updating delayed features after port initialization
Jun 28 22:14:33.914178 r-tigris-22 INFO featured: Feature lldp is enabled and started
Jun 28 22:14:35.536264 r-tigris-22 INFO featured: Feature mgmt-framework is enabled and started
Jun 28 22:14:38.098571 r-tigris-22 INFO featured: Feature snmp is enabled and started
Jun 28 22:14:39.555727 r-tigris-22 INFO featured: Feature telemetry is enabled and started
Jun 28 22:13:33.977011 r-tigris-22 INFO hostcfgd: ConfigDB connect success
Jun 28 22:13:33.993878 r-tigris-22 INFO hostcfgd: Waiting for systemctl to finish initialization
Jun 28 22:13:34.274818 r-tigris-22 INFO hostcfgd: systemctl has finished initialization -- proceeding ...
Jun 28 22:13:34.391623 r-tigris-22 INFO hostcfgd: file size check pass: /etc/pam.d/sshd size is (2139) bytes
Jun 28 22:13:34.427273 r-tigris-22 INFO hostcfgd: file size check pass: /etc/pam.d/login size is (4132) bytes
Jun 28 22:13:34.433390 r-tigris-22 INFO hostcfgd: file size check pass: /etc/nsswitch.conf size is (494) bytes
Jun 28 22:13:34.455110 r-tigris-22 INFO hostcfgd: file size check pass: /etc/nsswitch.conf size is (494) bytes
Jun 28 22:13:34.478882 r-tigris-22 INFO hostcfgd: Found audisp-tacplus PID: 442
Jun 28 22:13:34.482365 r-tigris-22 INFO hostcfgd: cmd - ['service', 'aaastatsd', 'stop']
Jun 28 22:13:36.108569 r-tigris-22 INFO hostcfgd: NtpCfg load ...
Jun 28 22:13:36.108699 r-tigris-22 INFO hostcfgd: ntp server update key 0
Jun 28 22:13:36.108763 r-tigris-22 INFO hostcfgd: ntp server update, restarting ntp-config, ntp servers configured set()
Jun 28 22:14:06.691693 r-tigris-22 INFO hostcfgd: KdumpCfg init ...
Jun 28 22:14:06.691771 r-tigris-22 DEBUG hostcfgd: passw_policies_update - key: POLICIES
Jun 28 22:14:06.691832 r-tigris-22 DEBUG hostcfgd: passw_policies_update - data: {'digits_class': 'true', 'expiration': '180', 'expiration_warning': '15', 'history_cnt': '10', 'len_min': '8', 'lower_class': 'true', 'reject_user_passw_match': 'true', 'special_class': 'true', 'state': 'disabled', 'upper_class': 'true'}
Jun 28 22:14:06.691891 r-tigris-22 DEBUG hostcfgd: modify_conf_file: passw_policies - {'digits_class': True, 'expiration': '180', 'expiration_warning': '15', 'history_cnt': '10', 'len_min': '8', 'lower_class': True, 'reject_user_passw_match': True, 'special_class': True, 'state': 'disabled', 'upper_class': True}
Jun 28 22:14:06.701982 r-tigris-22 DEBUG hostcfgd: Initial hostname: r-tigris-22
Jun 28 22:14:06.702075 r-tigris-22 DEBUG hostcfgd: Initial mgmt interface conf: {('eth0', '10.210.24.108/22'): {'gwaddr': '10.210.24.1'}}
Jun 28 22:14:06.702115 r-tigris-22 DEBUG hostcfgd: Initial mgmt VRF state:
Jun 28 22:14:06.702177 r-tigris-22 INFO hostcfgd: RSyslogCfg: Initial config: {'config': {'GLOBAL': {'rate_limit_burst': '0', 'rate_limit_interval': '0'}}, 'servers': {}}
Jun 28 22:14:06.709455 r-tigris-22 INFO hostcfgd[39326]: Failed to restart resolv-config.service: Unit resolv-config.service not found.
Jun 28 22:14:06.709560 r-tigris-22 ERR hostcfgd: ['systemctl', 'restart', 'resolv-config'] - failed: return code - 5, output:#012None
admin@r-tigris-22:~$ Connection to r-tigris-22 closed by remote host.
```
#### Why I did it
src/sonic-gnmi
```
* c548cc2 - (HEAD -> master, origin/master, origin/HEAD) Support empty protobytes (#141) (2 hours ago) [ganglv]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* cd882cc8 - (HEAD -> master, origin/master, origin/HEAD) Input check for timeout in generate_dump (#2925) (4 hours ago) [ycoheNvidia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-gnmi
```
* 58a7b20 - (HEAD -> master, origin/master, origin/HEAD) Add delete field to On change response when key is deleted (#139) (8 hours ago) [Zain Budhwani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* a56b11b6 - (HEAD -> master, origin/master, origin/HEAD) revert unit test tests/test_clear_tag (#2934) (10 hours ago) [Mai Bui]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Support default DNS configuration
How I did it
Use j2 template to generate default DNS configuration.
How to verify it
Run sonic-config-engine unit test.
This reverts commit e0927e28af.
Why I did it
Reverts #15720
It breaks build for target/debs/bullseye/syncd_1.0.0_amd64.deb
make[2]: Entering directory '/sonic/src/sonic-sairedis'
dh_install
# Note: escape with an extra symbol
if [ -f debian/syncd-rpc/usr/bin/syncd_init_common.sh ] ; then
/bin/sh: 1: Syntax error: end of file unexpected (expecting "fi")
make[2]: *** [debian/rules:65: override_dh_install] Error 2
make[2]: Leaving directory '/sonic/src/sonic-sairedis'
make[1]: *** [debian/rules:51: binary] Error 2
make[1]: Leaving directory '/sonic/src/sonic-sairedis'
dpkg-buildpackage: error: fakeroot debian/rules binary subprocess returned exit status 2
Work item tracking
Microsoft ADO (number only): 24691535
How I did it
How to verify it
#### Why I did it
src/sonic-gnmi
```
* 2c8e4ab - (HEAD -> master, origin/master, origin/HEAD) Support proto encoding (#140) (22 hours ago) [ganglv]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Support FIPS DB configuration
Design Doc: sonic-net/SONiC#1372
Work item tracking
Microsoft ADO (number only): 24411148
How I did it
Add the FIPS Yang model to make FIPS configurable in ConfigDB.
How to verify it
See TestPlan: sonic-net/sonic-mgmt#9092
Build the image and run the tests: sonic-net/sonic-mgmt#9091
#### Why I did it
src/linkmgrd
```
* aa902a3 - (HEAD -> master, origin/master, origin/HEAD) [link prober] Increase pause/restart probe log verbosity (#213) (3 days ago) [Longxiang Lyu]
* 736cdda - [active-standby] Write `unhealthy` is default route `N/A` (#214) (3 days ago) [Longxiang Lyu]
* e923e15 - Add ADO to the PR template (#215) (4 days ago) [Longxiang Lyu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
https://github.com/sonic-net/sonic-utilities/pull/472 Added SNMP_AGENT_ADDRESS_CONFIG table in config db.
This PR is to add corresponding YANG model for that table.
##### Work item tracking
- Microsoft ADO **(number only)**:
#### How I did it
Added YANG modesl for SNMP_AGENT_ADDRESS_CONFIG.
keys: agent_ip, port number, vrf.
CLI implementaion checks if agent_ip, port number already exists in CONFIG_DB table, if it does, then new entry is not added.
So added another condition to ensure combination of agent_ip and port is unique.
Below is an example of how data looks like in DB:
```
127.0.0.1:6379[4]> HGETALL "SNMP_AGENT_ADDRESS_CONFIG|10.1.1.1|161|foo"
1) "NULL"
2) "NULL"
127.0.0.1:6379[4]> HGETALL "SNMP_AGENT_ADDRESS_CONFIG|10.1.0.32|161|"
1) "NULL"
2) "NULL"
```
#### How to verify it
Added unit-test for various combinations and ensures that it passes.
Why I did it
get_system_mac was returning 'None' mac for system without eeprom.
get_system_mac for marvell platform checks for mac in eeprom, profile.ini(hwsku file) and eth0. Check for valid mac returned by syseeprom was incorrect. Which was resulting in bypassing mac get from profile.ini and eth0.
How I did it
get_system_mac already has a logic to get first valid mac.
Removed null check for mac returned by eeprom.
Corrected the check for profile.ini file by checking if file exist.
How to verify it
Executed sonic-cfggen to check valid mac address is getting configured in config_db.json with/without profile.ini.
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
This submodule update needs to be manually done due to build changes
done in the sairedis submodule. Specifically, Debian build profiles are
now being used instead of dpkg build targets, and dbgsym packages are
being used instead of dbg packages. Because of this, there needs to be
changes on the sonic-buildimage side for this.
This submodule update brings in the following changes:
ce8f642 [vs] Use boost join to concatenate switch types in config (#1266)
d6055a2 [vslib]: Temporaily map DPU switch type to NVDA_MBF2H536C (#1259)
e1cdb4d [CodeQL]: Use dependencies with relevant versions in azp template. (#1262)
c08f9a2 [CI]: Fix collect log error in azp template. (#1260)
eed856c [CodeQL]: Fix syncd compilation in azp template. (#1261)
a3f1f1a Reland 'Make changes to building and packaging sairedis (#1116)' (#1194)
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
src/sonic-platform-daemons
```
* 76baca3 - (HEAD -> master, origin/master, origin/HEAD) Fixes for the issues uncovered by sonic-pcied unit tests (#389) (32 hours ago) [Ashwin Srinivasan]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
For route registry service, in order to block hijacked routes, IBGP session needs to be set up from BGP sentinel service to SONiC, and BGP sentinel service advertise the same route with higher local-preference and no export community. So that SONiC takes the route from BGP sentinel as the best path and does not advertise the route to EBGP peers.
In order to do that, new route-maps are needed. So this change adds a new set of templates, keeping BGPSentinel peers out of the other templates.
Work item tracking
Microsoft ADO (number only): 24451346
How I did it
Add sentinel_community in constants.yml, route from BGPSentinel do not match this community will be denied.
Add support to convert BGPSentinel related configuration in the BGPPeerPassive element of the minigraph to a new BGP_SENTINELS table in CONFIG_DB
Add a new set of "sentinels" templates to docker-fpm-frr
Add a new BGP peer manager to bgpcfgd, to add neighbors from the BGP_SENTINELS table using the "sentinels" templates
Add a test case for minigraph.py, making sure the BGPSentinel and BGPSentinelV6 elements create BGP_SENTINELS DB entry.
Add a set of test cases for the new sentinels templates in sonic-bgpcfgd tests.
Add sonic-bgp-sentinel.yang and a set of testcases for the yang file.
How to verify it
Testcases and UT newly added would pass.
Setup IPv4 and IPv6 BGPSentinel services in minigraph, and load minigraph, show CONFIG_DB and "show runningconfig bgp", configuration would be loaded successfully.
Using t1-lag topo and setup IBGP session from BGPSentinel to SONiC loopback address, IBGP session would up.
Advertise route from BGPSentinel to T1 with sentinel_community, higher local-preference and no-export communiyt. In T1, show bgp route, the result is "Not advertise to any EBGP peer".
Withdraw the route in BGPSentinel, in T1, route would advertise to EBGP peers.
Advertise route from T1 that does not match sentinel_community, in T1, would not see the route in show bgp route.
