HW set qsfp port to reset at default. so need SW to set to normal when boot.
1. Modify cpld driver to invert reset offset value
2. Set to normal when boot.
* Remove 'backend' from device type strings so that backend devices ('BackEndToRRouter' and 'BackEndLeafRouter') are given the same cable lengths as regular device types.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Treat devices that are ToRRouters (ToRRouters and BackEndToRRouters) the same when rendering templates
Except for BackEndToRRouters belonging to a storage cluster, since these devices have extra sub-interfaces created
Treat devices that are LeafRouters (LeafRouters and BackEndLeafRouters) the same when rendering templates
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Fixed TSA bugs:
1. TSA didn't advertise Loopback ipv6 address
2. TSA and TSB changed BGP dynamic and BGP monitors sessions
**- How to verify it**
Build an image and run on your DUT.
```
admin@str-s6100-acs-1:~$ TSA
System Mode: Normal -> Maintenance
admin@str-s6100-acs-1:~$ vtysh -c 'show bgp ipv4 neighbors 10.0.0.1 advertised-routes'
BGP table version is 6, local router ID is 10.1.0.32, vrf id 0
Default local pref 100, local AS 64601
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.1.0.32/32 0.0.0.0 0 32768 i
Total number of prefixes 1
admin@str-s6100-acs-1:~$ vtysh -c 'show bgp ipv6 neighbors fc00::a advertised-routes'
BGP table version is 6, local router ID is 10.1.0.32, vrf id 0
Default local pref 100, local AS 64601
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> fc00:1::/64 :: 0 32768 i
Total number of prefixes 1
admin@str-s6100-acs-1:~$ TSB
System Mode: Maintenance -> Normal
```
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
To make Control plane ACLs handle case insensitive ACL rules. Currently, it handles only upper case ACL rules.
Co-authored-by: Madhan Babu <madhan@arc-build-server.mtr.labs.mlnx>
- Why I did it
Update the routine is_bgp_session_internal() by checking the BGP_INTERNAL_NEIGHBOR table.
Additionally to address the review comment #5520 (comment)
Add timer settings as will in the internal session templates and keep it minimal as these sessions which will always be up.
Updates to the internal tests data + add all of it to template tests.
- How I did it
Updated the APIs and the template files.
- How to verify it
Verified the internal BGP sessions are displayed correctly with show commands with this API is_bgp_session_internal()
* Initial commit for BGP internal neighbor table support.
> Add new template named "internal" for the internal BGP sessions
> Add a new table in database "BGP_INTERNAL_NEIGHBOR"
> The internal BGP sessions will be stored in this new table "BGP_INTERNAL_NEIGHBOR"
* Changes in template generation tests with the introduction of internal neighbor template files.
In multi asic platforms the "show ip bgp summary" commands is not available for user with read only privileges, so to fix this the vtysh command with the new "-n" option, added for multi asic platforms, needs to be added to the READ_ONLY_COMMANDS list in the sudoers files. Added the command vtysh -n [0-9] -c show * to list of READ_ONLY_COMMANDS in the sudoers files in this commit.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
API getMount() API was not updated to handle multi-asic platforms
Updated API getMount() to return abspath() for Docker Mount Point
and use that one for mount point comparison
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Some platforms don't leverage the brcm led coprocessor.
However ledinit will try to load a non existing file and exit with an
error code.
This change is a cosmetic fix mostly.
- How to verify it
Boot a platform without the configuration and verify in the syslog that the exit status of ledinit is 0
Boot a platform with the configuration and verify in the syslog that the exit status of ledinit is 0 and the leds are working.
Verified by adding a dumb led_proc_init.soc on an Arista platform which usually doesn't use it.
Our use case is to register new features in runtime. The previous change which introduced the cache broke this capability and caused hostcfgd crash.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
- Fix bug: `CORE_FILE_DIR` previously was set to `os.path.basename(__file__)`, which would resolve to the script name. Fix this by hardcoding to `/var/core/`
- Remove locally-define logging functions; use Logger class from sonic-py-common instead
Increase startretires value from default of 10 to 50 to prevent supervisor from placing thermalctld in FATAL state during regression testing. Also ensures supervisord tries hard to get thermalctld running in production, as thermalctld is critical to prevent device from overheating.
Update SDK 4.4.1956 and FW *.2008.1956
Bugs fixes:
1. Link | Clear operational speed when link is not active
2. Spectrum-2, SN3800 | On rare occasion, link flapping due to bad BER causes traffic loss
3. Spectrum-3 | On rare occasion, link flapping due to bad BER causes traffic loss as a result of new PAM4 link maintenance flow on Spectrum-3 devices
4. Shared Buffers | On rare occasion, modifying shared buffers on a system with split port while traffic is running may cause the firmware to get stuck
5. Spectrum-3, SN4700 | Fence may fail while running 400GbE 8x port when modifying mirror session configurations under traffic
FixAzure/SONiC#551
When eth0 IP address is configured, an ip rule is getting added for eth0 IP address through the interfaces.j2 template.
This eth0 ip rule creates an issue when VRF (data VRF or management VRF) is also created in the system.
When any VRF (data VRF or management VRF) is created, a new rule is getting added automatically by kernel as "1000: from all lookup [l3mdev-table]".
This l3mdev IP rule is never getting deleted even if VRF is deleted.
Once if this l3mdev IP rule is added, if user configures IP address for the eth0 interface, interfaces.j2 adds an eth0 IP rule as "1000:from 100.104.47.74 lookup default ". Priority 1000 is automatically chosen by kernel and hence this rule gets higher priority than the already existing rule "1001:from all lookup local ".
This results in an issue "ping from console to eth0 IP does not work once if VRF is created" as explained in Issue 551.
More details and possible solutions are explained as comments in the Issue551.
This PR is to resolve the issue by always fixing the low priority 32765 for the IP rule that is created for the eth0 IP address.
Tested with various combinations of VRF creation, deletion and IP address configuration along with ping from console to eth0 IP address.
Co-authored-by: Kannan KVS <kannan_kvs@dell.com>
Added new MultiASIC util method "get_back_end_interface_set()" to speed up back-end interface check by allowing caller to cache the back-end intf into a set. This way the caller can use this set for all subsequent back-end interface check requests instead of each time need to read from redis DB which become a scaling issue for cases such as checking for thousands of nexthop routes for filtering purpose.
- Why I did it
The update_all_feature_states can run in the range of 20+ seconds to one minute. With load of AAA & Tacacs preceding it, any DB updates in AAA/TACACS during the long running feature updates would get missed. To avoid, switch the order.
- How I did it
Do a load after after updating all feature states.
- How to verify it
Not a easy one
Have a script that
restart hostcfgd
sleep 2s
run redis-cli/config command to update AAA/TACACS table
Run the script above and watch the file /etc/pam.d/common-auth-sonic for a minute.
- When it repro:
The updates will not reflect in /etc/pam.d/common-auth-sonic
Why/How I did:
Make sure first error syslog is triggered based on FAULT TOLERANCE condition.
Added support of repeat clause with alert action. This is used as trigger
for generation of periodic syslog error messages if error is persistent
Updated the monit conf files with repeat every x cycles for the alert action
FixAzure/SONiC#551
When eth0 IP address is configured, an ip rule is getting added for eth0 IP address through the interfaces.j2 template.
This eth0 ip rule creates an issue when VRF (data VRF or management VRF) is also created in the system.
When any VRF (data VRF or management VRF) is created, a new rule is getting added automatically by kernel as "1000: from all lookup [l3mdev-table]".
This l3mdev IP rule is never getting deleted even if VRF is deleted.
Once if this l3mdev IP rule is added, if user configures IP address for the eth0 interface, interfaces.j2 adds an eth0 IP rule as "1000:from 100.104.47.74 lookup default ". Priority 1000 is automatically chosen by kernel and hence this rule gets higher priority than the already existing rule "1001:from all lookup local ".
This results in an issue "ping from console to eth0 IP does not work once if VRF is created" as explained in Issue 551.
More details and possible solutions are explained as comments in the Issue551.
This PR is to resolve the issue by always fixing the low priority 32765 for the IP rule that is created for the eth0 IP address.
Tested with various combinations of VRF creation, deletion and IP address configuration along with ping from console to eth0 IP address.
Co-authored-by: Kannan KVS <kannan_kvs@dell.com>
* Fix for LLDP advertisments being sent with wrong information.
Since lldpd is starting before lldpmgr, some advertisment packets might sent with default value, mac address as Port ID.
This fix hold the packets from being sent by the lldpd until all interfaces are well configured by the lldpmgrd.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
* Fix comments
* Fix unit-test output caused a failure during build
* Add 'run_cmd' function and use it
* Resume lldpd even if port init timeout reached
When detecting a new SFP insertion, read its SFP type and DOM capability from EEPROM again.
SFP object will be initialized to a certain type even if no SFP present. A case could be:
1. A SFP object is initialized to QSFP type by default when there is no SFP present
2. User insert a SFP with an adapter to this QSFP port
3. The SFP object fail to read EEPROM because it still treats itself as QSFP.
This PR fixes this issue.
During platform deinitialization, dell_ich is not removed properly and when we do initialize s6100 platform, ICH driver sysfs attributes are not attached. Because of this, get_transceiver_change_event returns error and this leads xcvrd to crash.
**- Why I did it**
To introduce dynamic support of BBR functionality into bgpcfgd.
BBR is adding `neighbor PEER_GROUP allowas-in 1' for all BGP peer-groups which points to T0
Now we can add and remove this configuration based on CONFIG_DB entry
**- How I did it**
I introduced a new CONFIG_DB entry:
- table name: "BGP_BBR"
- key value: "all". Currently only "all" is supported, which means that all peer-groups which points to T0s will be updated
- data value: a dictionary: {"status": "status_value"}, where status_value could be either "enabled" or "disabled"
Initially, when bgpcfgd starts, it reads initial BBR status values from the [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR34). Then you can control BBR status by changing "BGP_BBR" table in the CONFIG_DB (see examples below).
bgpcfgd knows what peer-groups to change fron [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR39). The dictionary contains peer-group names as keys, and a list of address-families as values. So when bgpcfgd got a request to change the BBR state, it changes the state only for peer-groups listed in the constants.yml dictionary (and only for address families from the peer-group value).
**- How to verify it**
Initially, when we start SONiC FRR has BBR enabled for PEER_V4 and PEER_V6:
```
admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas'
neighbor PEER_V4 allowas-in 1
neighbor PEER_V6 allowas-in 1
```
Then we apply following configuration to the db:
```
admin@str-s6100-acs-1:~$ cat disable.json
{
"BGP_BBR": {
"all": {
"status": "disabled"
}
}
}
admin@str-s6100-acs-1:~$ sonic-cfggen -j disable.json -w
```
The log output are:
```
Oct 14 18:40:22.450322 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'disabled'),))'
Oct 14 18:40:22.450620 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpmWTiuq']'.
Oct 14 18:40:22.681084 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'.
Oct 14 18:40:22.904626 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'.
```
Check FRR configuraiton and see that no allowas parameters are there:
```
admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas'
admin@str-s6100-acs-1:~$
```
Then we apply enabling configuration back:
```
admin@str-s6100-acs-1:~$ cat enable.json
{
"BGP_BBR": {
"all": {
"status": "enabled"
}
}
}
admin@str-s6100-acs-1:~$ sonic-cfggen -j enable.json -w
```
The log output:
```
Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'enabled'),))'
Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpDD6SKv']'.
Oct 14 18:40:41.587257 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'.
Oct 14 18:40:42.042967 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'.
```
Check FRR configuraiton and see that the BBR configuration is back:
```
admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas'
neighbor PEER_V4 allowas-in 1
neighbor PEER_V6 allowas-in 1
```
*** The test coverage ***
Below is the test coverage
```
---------- coverage: platform linux2, python 2.7.12-final-0 ----------
Name Stmts Miss Cover
----------------------------------------------------
bgpcfgd/__init__.py 0 0 100%
bgpcfgd/__main__.py 3 3 0%
bgpcfgd/config.py 78 41 47%
bgpcfgd/directory.py 63 34 46%
bgpcfgd/log.py 15 3 80%
bgpcfgd/main.py 51 51 0%
bgpcfgd/manager.py 41 23 44%
bgpcfgd/managers_allow_list.py 385 21 95%
bgpcfgd/managers_bbr.py 76 0 100%
bgpcfgd/managers_bgp.py 193 193 0%
bgpcfgd/managers_db.py 9 9 0%
bgpcfgd/managers_intf.py 33 33 0%
bgpcfgd/managers_setsrc.py 45 45 0%
bgpcfgd/runner.py 39 39 0%
bgpcfgd/template.py 64 11 83%
bgpcfgd/utils.py 32 24 25%
bgpcfgd/vars.py 1 0 100%
----------------------------------------------------
TOTAL 1128 530 53%
```
**- Which release branch to backport (provide reason below if selected)**
- [ ] 201811
- [x] 201911
- [x] 202006
Example of syslog message from Mellanox SAI:
"Oct 7 15:39:11.482315 arc-switch1025 INFO syncd#supervisord: syncd Oct 07 15:39:11 NOTICE SAI_BUFFER: mlnx_sai_buffer.c[3893]- mlnx_clear_buffer_pool_stats: Clear pool stats pool id:1"
There is a log INFO from supervisord which actually printed NOTICE and
date again. This confusion happens becuase if SAI is not built to log
to syslog it will log everything to stdout with format "[date] [level]
[message]" so supervisord sends it to syslog with level INFO.
New logs look like:
"Oct 7 15:40:21.488055 arc-switch1025 NOTICE syncd#SDK [SAI_BUFFER]: mlnx_sai_buffer.c[3893]- mlnx_clear_buffer_pool_stats: Clear pool stats pool id:17"
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
**- Why I did it**
I was asked to change "Allow list" prefix-list generation rule.
Previously we generated the rules using following method:
```
For each {prefix}/{masklen} we would generate the prefix-rule
permit {prefix}/{masklen} ge {masklen}+1
Example:
Prefix 1.2.3.4/24 would have following prefix-list entry generated
permit 1.2.3.4/24 ge 23
```
But we discovered the old rule doesn't work for all cases we have.
So we introduced the new rule:
```
For ipv4 entry,
For mask < 32 , we will add ‘le 32’ to cover all prefix masks to be sent by T0
For mask =32 , we will not add any ‘le mask’
For ipv6 entry, we will add le 128 to cover all the prefix mask to be sent by T0
For mask < 128 , we will add ‘le 128’ to cover all prefix masks to be sent by T0
For mask = 128 , we will not add any ‘le mask’
```
**- How I did it**
I change prefix-list entry generation function. Also I introduced a test for the changed function.
**- How to verify it**
1. Build an image and put it on your dut.
2. Create a file test_schema.conf with the test configuration
```
{
"BGP_ALLOWED_PREFIXES": {
"DEPLOYMENT_ID|0|1010:1010": {
"prefixes_v4": [
"10.20.0.0/16",
"10.50.1.0/29"
],
"prefixes_v6": [
"fc01:10::/64",
"fc02:20::/64"
]
},
"DEPLOYMENT_ID|0": {
"prefixes_v4": [
"10.20.0.0/16",
"10.50.1.0/29"
],
"prefixes_v6": [
"fc01:10::/64",
"fc02:20::/64"
]
}
}
}
```
3. Apply the configuration by command
```
sonic-cfggen -j test_schema.conf --write-to-db
```
4. Check that your bgp configuration has following prefix-list entries:
```
admin@str-s6100-acs-1:~$ show runningconfiguration bgp | grep PL_ALLOW
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 10 deny 0.0.0.0/0 le 17
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 20 permit 127.0.0.1/32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 30 permit 10.20.0.0/16 le 32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 40 permit 10.50.1.0/29 le 32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 10 deny 0.0.0.0/0 le 17
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 20 permit 127.0.0.1/32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 30 permit 10.20.0.0/16 le 32
ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 40 permit 10.50.1.0/29 le 32
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 10 deny ::/0 le 59
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 20 deny ::/0 ge 65
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 30 permit fc01:10::/64 le 128
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 40 permit fc02:20::/64 le 128
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 10 deny ::/0 le 59
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 20 deny ::/0 ge 65
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 30 permit fc01:10::/64 le 128
ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 40 permit fc02:20::/64 le 128
```
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
The psutil library used in process_checker create a cache for each
process when calling process_iter. So, there is some possibility that
one process exists when calling process_iter, but not exists when
calling cmdline, which will raise a NoSuchProcess exception. This commit
fix the issue.
Signed-off-by: bingwang <bingwang@microsoft.com>
