Why I did it
In an effort to allow people to build a slim version of SONiC to fit on devices to small storage, there is a need to disable some unneeded features.
The docker-gbsyncd are only applicable to devices with external gearboxes and might not apply to devices that need a small image.
It is therefore desirable to have a knob to not include these gbsyncd containers.
Work item tracking
Microsoft ADO (number only):
How I did it
Add a new config INCLUDE_GBSYNCD which is enabled by default to retain the previous behavior.
Setting it to n will not include the platform/components/docker-gbsyncd-*.mk.
How to verify it
Set INCLUDE_GBSYNCD = n and witness that docker-gbsyncd images are not present in the final image.
- Why I did it
Add an ability to add arm64 mellanox specific kconfig using the integration tool
Fix the existing duplicate kconfig problem by using the vanilla .config
Add an ability to patch kconfig-inclusions file. Renamed series.patch to external-changes.patch to reflect the behavior
NOTE: Min hw-mgmt version to use with these changes: V.7.0030.2000 not yet upstream but required prio to it.
This option will be enabled one the new hw mgmt will be upstream.
Depends on sonic-net/sonic-linux-kernel#336
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Added Marvell SAI-1.13.0 debian support for x86_64 platform.
Work item tracking
Microsoft ADO (number only):
How I did it
compile marvel libsai.so (with SAI headers from version 1.13.0) and package it with version 1.13.0-1
How to verify it
Updated sdk & driver requries hugepage to be reserved during kernel
boot. These kernel command line agrument are passed from installer.conf
in device folder.
Change-Id: Id43f61af2b050500775da66d058c2de78cb5ad15
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
This patch adds support for lazy install of Marvell prestera SDK
drivers for platform-nokia. Lazy install for drivers is added as
updated sdk driver needs to classify the drivers required for platform
during compile time. SDK drivers and platform files are now fetched
from a submodule(mrvl-prestera).
Additionaly, DTB required for sonic_fit creation during compile time
is sourced from sonic-linux-kernel.
Change-Id: Id5b011e6bd67accf7b1579d91cb7affad464e916
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
Upgrade the xgs SAI version to 8.4.21.0 to include the following changes:
8.4.21.0: [CSP CS00012316669][SAI_BRANCH rel_ocp_sai_8_4] FP destroy API behavior change to avoid traffic leaks
8.4.20.0: [CSP CS00012312900] Max path used as 0 in ordered ECMP replace.
8.4.19.0: [CSP CS00012301679] sai_query_attribute_capability SAI_OBJECT_TYPE_SWITCH, fix few attrs in previous checkin
8.4.18.0: [CSP CS00012310706] Add SAI_TUNNEL_SUPPORT to azure pipeline build files
8.4.16.0: [CSP CS00012301679] sai_query_attribute_capability for obj type SAI_OBJECT_TYPE_SWITCH
8.4.15.0: [SAI_BRANCH rel_ocp_sai_8_4] Port SONIC-75025 to SAI 8.4
8.4.14.0: [CSP CS00012306356] Change log level of sai_bulk_object_get_stats, unsupported object type to warning
8.4.13.0: [CSP CS00012302193] backport SONIC-72912 jira on SAI 8.4 branch
8.4.12.0: [CSP CS00012296541][SAI_BRANCH rel_ocp_sai_8_4] Preformance improvement for ECMP from SDK-354625
8.4.11.0: [CSP CS00012293985] Port SONIC-74816 fix to 8.4.
8.4.10.0: [CSP NA/SID-26013][SAI_BRANCH rel_ocp_sai_8_4] SID - L3 multicast packet drop due to wrong VFI derivation - SDK-350470
8.4.9.0: [CSP NA/SID-25917][SAI_BRANCH rel_ocp_sai_8_4] SID-Crash in ALPM algorithm during entry split SDK-343694
8.4.8.0: [CSP CS00012275265][SAI_BRANCH rel_ocp_sai_8_4] SID Deadlock in linkscan callback during flexport operations
8.4.7.0: [CSP CS00012284142] Fixed MMU buffer config issue with multicast queues
8.4.6.0: [CSP CS00012275454] sai_object_type_get_availability failed with SAI_STATUS_INVALID_PARAMETER; [CSP CS00012284121] [SAI_BRANCH rel_ocp_sai_8_4] SID - L2_ENTRY Table Lookups May Miss
8.4.4.0: [CSP CS00012287462] Uplift tunnel fix from SONIC-73462
8.4.2.0: Fixing the issue with SAI_QUEUE_STAT_DROPPED_PACKETS retrieval; Enable/Disable bitmask for egress stats; SAI - OCP SAI 8.4 - SAI: Reduce Index data type union _brcm_sai_indexed_data_t size to be below 2k.; Cut Down Version - Port Tpid Compilation Issue Fix
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
- Why I did it
hw-management renamed PSU temperature related sysfs:
psu1_temp -> psu1_temp1
psu2_temp -> psu2_temp1
psu1_temp_max -> psu1_temp1_max
psu2_temp_max -> psu2_temp1_max
This PR is to align the change in SONiC.
- How I did it
Use new sysfs node for PSU temperature and PSU temperature threshold
- How to verify it
Manual test
sonic-mgmt Regression test
1. Upgrade Centec SAI debian package version to v1.13, in order to match syncd's requirement.
2. Fix syncd compile fail for missing sai_query_api_version function in verdor sai
Signed-off-by: Xianghong Gu <xgu@centec.com>
Why I did it
SONiC service determine-reboot-cause might run before driver creating reset cause files. In that case, the reset cause will be "Unknown". This PR introduces a wait mechanism to wait for reset cause sysfs files ready.
How I did it
/run/hw-management/config/reset_attr_ready is the file to indicate all reset cause files are ready. In chassis.get_reboot_cause function, it waits /run/hw-management/config/reset_attr_ready for up to 45 seconds.
How to verify it
Manual test on master/202211/202205
Why I did it
Add info syslog for cpu_wdt.service when trigger watchdog arm action.
How I did it
Add info syslog for cpu_wdt.service when trigger watchdog arm action.
This fixesNokia-ION/ndk#22
Note that this PR must be coupled with NDK version >= 22.9.13
Why I did it
To provide proper support for CMIS compliant transceiver module CDB operations (including FW related operations).
How I did it
Enhanced the transport subsystem so as to provide for up to 2k bytes of data to be passed to/from modules (as contrasted with the prior max of 128 bytes).
How to verify it
Ensure that new FW (firmware) can be programmed to CMIS compliant module(s) using the 'sfputil firmware ...' commands.
To include files in path platform/broadcom/sonic-platform-modules-dell/s6100/bin during build in Dell S6100 platform deb package.
How I did it
During Dell S6100 platform deb package build, copy the files to the install location.
How to verify it
- Copy the required files to platform/broadcom/sonic-platform-modules-dell/s6100/bin.
- Build the SONiC image and install in a Dell S6100 device.
- The files will be available in /usr/share/sonic/device/x86_64-dell_s6100_c2538-r0/bin/.
SONiC CLI command was broken.
admin@sonic:~$ show platform psustatus
PSU Model Serial HW Rev Voltage (V) Current (A) Power (W) Status LED
----- --------------- ------------------ -------- ------------- ------------- ----------- -------- -----
PSU 1 PFE600-12-054NA 420000956420600006 206 N/A N/A 82.00 OK green
PSU 2 PFE600-12-054NA 420000956420600248 206 N/A N/A 60.00 NOT OK green
Management port currently broken for Edgecore AS4630-54PE platform due to NIC hardware numbering.
Created new PR with typo from Edgecore in original PR fixed. Here is a link to the old PR that has broken logic:
#9560
Sfp api can now be called from the host which doesn't have the python_sdk_api installed. Also, sfp api has been migrated to use sysfs instead of sdk handle.
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
* platform/pddf/README.md: Fix typo in *development*
* platform/pddf/README.md: Remove trailing space
* platform/pddf/README.md: Remove leading space from all lines
#15926 updated the submodule hash to point to a commit on a private branch that included changes for compiling with the 5.10.179 kernel. However, this submodule hash should've pointed to one on the master branch, not on a private branch. Fix this with this PR.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
sonic-mgmt test failure is seen for update_firmware component API
Microsoft ADO: 25208748
How I did it
Edited API 2.0 to fix this issue.
How to verify it
Run sonic-mgmt test after the fix and verify it passes.
This feature was meant to be enabled but was accidentally left disabled.
Also downgrades the select/deselect messages to KERN_INFO to reduce log
spam.
Fixes#14546.
Signed-off-by: Christian Svensson <blue@cmd.nu>
- Why I did it
To support the building of ARM-based docker-sonic-vs.gz
- How I did it
Fixed SYNCD_VS build rule to be architecture-specific.
- How to verify it
make configure PLATFORM=vs PLATFORM_ARCH=arm64
make target/docker-sonic-vs.gz
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 which is 255 when fastboot enable and 511 when fastboot disable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
1. Port init profile
2. Dual ToR Active-Standby | Additional MAC support
SDK/FW bug fixes
1. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
- How I did it
Update SAI version to SAIBuild2211.25.1.4
Update SDK/FW version to 4.6.1062/2012.1062
- Why I did it
1. Update Mellanox HW-MGMT package to newer version V.7.0030.1011
2. Replace the SONiC PMON Thermal control algorithm with the one inside the HW-MGMT package on all Nvidia platforms
3. Support Spectrum-4 systems
- How I did it
1. Update the HW-MGMT package version number and submodule pointer
2. Remove the thermal control algorithm implementation from Mellanox platform API
3. Revise the patch to HW-MGMT package which will disable HW-MGMT from running on SIMX
4. Update the downstream kernel patch list
Signed-off-by: Kebo Liu <kebol@nvidia.com>
### Why I did it
1. Enhance the diagnosis information collecting mechanism
- If the option `-v` is fed, it will pass additional diagnosis flags to mlxfwmanager
- Collect all the output from mlxfwmanager and print them to syslog if it fails
2. Abort syncd in case waiting for device or upgrading firmware fails
Signed-off-by: Stephen Sun <stephens@nvidia.com>
### How I did it
#### How to verify it
Regression and manual test
- Why I did it
Because the Spectrum4 devices don't support mlxtrace utility.
- How I did it
Edit sai.profile and remove mlxtrace_spectrum4_itrace_*.cfg.ext files
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Why I did it
To avoid errors when the sfputil show error-status -hw is called from the host OS (not from the pmon docker).
How I did it
Remove the self.sdk_handle parameter from the _get_module_info() function.
How to verify it
Execute the sfputil show error-status -hw
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Why I did it
Support Intel Tofino based platforms Netberg Aurora 750
ASIC: Intel Tofino BFN-T10-064Q
Pors: 64x 100G
How I did it
Added specification to device/netberg directory
Added platform/barefoot/sonic-platform-modules-netberg contains kernel modules, scripts and sonic_platform packages.
Modified the platform/barefoot/platform-modules-netberg.mk to include Aurora 750 related ID.
Signed-off-by: Andrew Sapronov <andrew.sapronov@gmail.com>
What I did it
Add new platform arm64-ragile_ra-b6010-48gt4x-r0 (Centec)
ASIC Vendor: Centec
Switch ASIC: Centec
Port Config: 48x1G+4x10G
Why I did it
Add new platform RA-B6010-48GT4X
How I did it
Add new platform RA-B6010-48GT4X
Signed-off-by: pettershao-ragilenetworks <pettershao@ragilenetworks.com>
Ignore intermittent IO errors during get_change_event in the Platform API
Fix tunings for some ports on CatalinaDD
Fix kernel module build for 6.1 kernel in preparation of bookworm upgrade
Why I did it
System health config is missing in few Dell platforms.
How I did it
Added system health monitoring config and its related API's
How to verify it
show system-health summary/detail commands.
- Why I did it
watchdogutil uses platform API watchdog instance to control/query watchdog status. In Nvidia watchdog status, it caches "armed" status in a object member "WatchdogImplBase.armed". This is not working for CLI infrastructure because each CLI will create a new watchdog instance, the status cached in previous instance will totally lose. Consider following commands:
admin@sonic:~$ sudo watchdogutil arm -s 100 =====> watchdog instance1, armed=True
Watchdog armed for 100 seconds
admin@sonic:~$ sudo watchdogutil status ======> watchdog instance2, armed=False
Status: Unarmed
admin@sonic:~$ sudo watchdogutil disarm =======> watchdog instance3, armed=False
Failed to disarm Watchdog
- How I did it
Use sysfs to query watchdog status
- How to verify it
Manual test
Unit test
- Why I did it
Change Mellanox platform API implementation to use ASIC driver sysfs for the module operational state and status error fields.
- How I did it
Modify the platform/mellanox/mlnx-platform-api/sonic_platform/sfp.py file by change the call of sx_mgmt_phy_module_info_get() SDK API to sysfs
- How to verify it
Simulate the unplug cable event
Check the CLI output
sfputil show presence
sfputil show error-status -hw
Simulate the plug cable event
Repeat 2 step
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
SONiC changes:
1. Support Spectrum4 ASIC FW binary building.
2. Support new SDK sx-obj-desc lib building since new SAI need it.
3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead).
4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3
SDK/FW bug fixes
1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed
SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes.
2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
SDK/FW Features
1. On SN2700 all ports can support y cable by credo
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
1. Port init profile
- How I did it
Update SDK/FW/SAI make files
- How to verify it
Run full sonic-mgmt regression on Mellanox platform
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Update Mellanox MFT tool to version 4.25.0-62
- How I did it
Update the MFT tool make file
- How to verify it
Run full sonic-mgmt regression.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
Add PDDF support on following Ufispace platforms with Broadcom ASIC
S9110-32X
S8901-54XC
S7801-54XS
S6301-56ST
How I did it
Add PDDF configuration files, scripts and python files
How to verify it
Run pddf commands and show commands.
Signed-off-by: nonodark <ef67891@yahoo.com.tw>
