* [security kernel] Upgrade kernel from 4.9.110-3+deb9u2 to 4.9.110-3+deb9u6
short version: 4.9.0-7 to 4.9.0-8
See changelogs for security fixes:
https://tracker.debian.org/media/packages/l/linux/changelog-4.9.110-3deb9u6
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update sonic-linux-kernel submodule after it was merged
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
knet driver unload takes about 30 seconds to remove netdevs. This cuts
into our warm reboot time budget.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Update arista drivers submodule
* Ignore the possible timestamp warning in tar extraction
* Add verbosity toggle to boot0
Console logging is slow because of the 9600 baud rate.
Some time can be saved by decreasing the console verbosity.
* Add hook mechanism in boot0.
Support additional features in boot0 via hooks.
Hooks are unpacked and executed at post-install or pre-exec time.
* Fix 7170 sensors.conf file
Fix critical temperature settings for MAX6658 sensors
* Fix the random swap of storage devices
For arista 7050 switches running with linux 4.9, it is likely the device
name of flash drive (/dev/sda) and usb (/dev/sdb) randomly swap in kernel
booting, depending on which one is ready first. It breaks the expectation
that flash will be mounted as root by setting root=/dev/sda1. This patch
will correct ROOT to flash device refering to the path under block_flash.
* Fix 7170 fancontrol
* Do not remove aquota.user file in boot0
This file is a filesystem protected file used by EOS.
It can be simply removed and will make the SONiC installation failed if
not skipped.
* Fix broadcom lane map for 7050-QX32S
First port lane map needs to be swapped.
* Update arista submodules for SFP txdisable toggle
With this update the SFPs will set txdisable to 0 when out of reset.
Allowing optical cables to be used on these ports.
* [syncd] warn shutdown syncd process when warm boot is enabled
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [warmboot] mount folder to hold warmboot temporary files
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Fix a typo
* [device][platform] d6254qs d6556 platform porting
[device][platform] sensor and status led support for d7032q28b d7254q28b d7264q28b d6254qs d6556
[device][platform] qos support for d7032q28b d7254q28b
[device][platform] service configuration files for d7032q28b d7254q28b d7264q28b d6254qs d6556
* remove binary files and remove non-supported attributes in config.bcm
* remove gpio-ich here. file a PR in sonic-linux-kernel instead.
* remove unnecessary comments
* add GPL license
* Update ag9032v1 and ag9064 modules.
Signed-off-by: neal tai <neal.tai@deltaww.com>
* Fix the sfputil.py when convert an integer to hexadecimal without the 'L' trailing.
Signed-off-by: neal tai <neal.tai@deltaww.com>
* [platform/haliburton] Fix kernel panic when remove smc module.
* [platform/haliburton] Chanage sysfs to support module interrupt
* [device/haliburton] Update sfputil to use new sysfs.
* [device/haliburton] sfputil to support xcvrd monitoring.
led start bcm cmd triggers link state notifications.
This is quick fix to avoid such fake link state notifications.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [device]: Modify SFPUtil for inventec-d7032
[device]: Add front panel led support for Inventec-d7032
[platform]: Add transceiver monitor daemon for Inventec-d7032 and Inventec-d7054
* [device] follow new porting guide to have broadcom config under device folder
* remove license
* [device] Update arista driver submodule
* Set Arista scd driver config
Set ARISTA_SCD_DRIVER_CONFIG config to build and
include scd driver to resulting Arista deb packages
* Added new platform support DellEMC - Z92264f - 64x100
* Includes changes with Makefiles, sfputil, eeprom and default minigraph
* Led support for Z9264f platform
* Includes changes on default minigraph
* ipmitool implementation in pmon docker. platform_sensors script is inclued in pmon startup
* [device] Update arista driver submodule
* Set Arista scd driver config
Set ARISTA_SCD_DRIVER_CONFIG config to build and
include scd driver to resulting arista deb packages
* [Broadcom SAI] upgrade Broadcom SAI to version 3.1.3.4-9
Includes configuration files for following devices:
- Quanta 1X1B-32X
- Dell Z9264F
- Inventec D7054Q28B and D7032Q28B
* [bcm sai] upgrade sai version to 3.1.3.4-10
include configuration change to 7060 T0.
* [platform]: Add a new supported platform, Delta-ag5648
CPU : Intel Rangeley C2538
Swich ASIC: Broadcom Tomahawk BCM56967
Ports : 48x25G + 6x100G
Switch SKU : Delta-ag5648
Signed-off-by: neal tai <neal.tai@deltaww.com>
* Delete the file
Delete the auto-generated file.
* [device]: ag5648 remove all *.cmd files.
remove the files under ag5648/modules
Signed-off-by: neal tai <neal.tai@deltaww.com>
* [device]: ag5648 device drivers
1. Use the common driver dni_emc2305.c
ag9032v1 device drivers
1. Move dni_emc2305.c to be the common driver
2. Remove at24.c
Signed-off-by: neal tai <neal.tai@deltaww.com>
* [device/dell] Added dynamic sai.profile generation
This commit addds new code for generating dynamic sai.profile file.
The sai.profile.j2 will generate the sai.profile dynamically based on
the topology. It will generate the sai.profile under /etc/sai.d/ directory
in syncd. Before syncd is started this J2 file will be run from the start.sh
file from /usr/bin/ directory. Since the sai.profile is dynamically generated
the old sai.profile file is not required so deleted the file for S6100.
It also address couple of more changes for port_config.ini support is added
for speed in the file which can be used later to find the port speed. Also
the buffer_default_t*.j2 file the ports should be from 0 to 64 changed.
Unit tested the code on S6100 for dynamic generation of sai.profile file for
both T0 and T1 and the file was created in /etc/sai.d/sai.profile
Similarly tested the sonic binary on S6000 to make sure that the sai.profile is
copied from the /usr/share/sonic/hwsku/sai.profile to /etc/sai.d/sai.profile.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@dell.com>
* [sonic-buildimage] Updating module sai-redis
Updating the sonic-sairedis point.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@dell.com>
* Support OS9 -> SONiC fast-reboot migration
* Address review comments. Update NOS mac in EEPROM and net.rules for eth0
* Address review comments. Update sonic-platform-modules-dell to fac81d...
* Fix script for POSIX compliance
* Add psuutil for S8900-54XC and S8900-64XC.
* Update syseeprom to CPU EEPROM for S9130-32X, S9200-64X and S9230-64X.
* Update sensors.conf for S9200-64X and S9230-64X.
* Update submodule for platform/broadcom/sonic-platform-modules-ingrasys
Signed-off-by: Wade He <chihen.he@gmail.com>
- What I did
Add psuutil support for Quanta-IX1B-32X
Update Quanta submodule
- How I did it
Update Quanta-IX1B-32X platform module driver.
- How to verify it
admin@switch1:~$ sudo psuutil status
PSU Status
----- --------
PSU 1 OK
PSU 2 OK
- Description for the changelog
Add psuutil support for Quanta-IX1B-32X
Update Quanta submodule
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Jonathan Tsai <jonathan.tsai@quantatw.com>
* [device] Add a new platform ly1200 for MiTAC
Signed-off-by: Eddy Weng <eddy.weng@mic.com.tw>
* [platform/broadcom/sonic-platform-modules-mitac] Update dependency for new kernel.
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
* [minigraph]: Set hostname in all default minigraphs to 'sonic'
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
* [kernel]: update linux kernel to support ly1200 of MiTAC
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
* [platform/broadcom/sonic-platform-modules-mitac] adapt PSU driver for linux kernel upgrade.
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
* Resolve the conflict with Quanta
modified files are as below.
.gitmodules
platform/broadcom/one-image.mk
platform/broadcom/rules.mk
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
- The driver package was split into bins, drivers, python2, python3
- Introduce some tracing regarding the switch chip reset
- Add watchdog during boot for DCS-7260CX3-64
* Upgrade linux-image version
* Add missing dependency of igb
* Fix mft build rule
* Add missing dependency of ixgbe
* [Broadcom]: Update OpenNSL modules to be compatible with kernel 3.16.0-5 (#3)
* [Nephos] Update SDK version to support new kernel module 3.16.0-5 (#4)
* [mellanox]: Update URL for SDK (#5)
* Fix build of libsaithrift for broadcom
* Restore libsaithrift-dev building
* Comment out libsaithrift library on cavium and marvell. Both of them have old SAI drivers
* Revert back unintentional acton changes
* Don't run the package checks when building sairedis package
* [platform] Add Psuutil and fixed voltage alarm for S9100
* Add I2C CPLD kernel module for psuutil.
* Support psuutil script.
* Add voltage min and max threshold.
Signed-off-by: Wade He <chihen.he@gmail.com>
* [Platform] Add Psuutil and update sensors.conf for S8810-32Q and S9200-64X
* Support psuutil script.
* Update sensors.conf for tmp75.
Signed-off-by: Wade He <chihen.he@gmail.com>
Revise kernel driver to duplicate nodes for support of lm-sensors, at fan and PSU.
Update sfputil.py to to fit new SfpUtil prototype.
Signed-off-by: roylee123 <roy_lee@accton.com>
1. _INSTALLS defines the packages to be installed in the image
at the build time.
2. _LAZY_INSTALLS defines the packages to be installed in the image
at the first run time
3. _DEPENDS defines the packages to at the build dependency of
the image
* Bump sonic-platform-modules-arista
Improves i2c performance for xcvrs
Fix the led_plugin by ignoring unknown ports
Miscellaneous improvements
* Fix index column for Arista-7260CX3-D108C8
* Fix flash permissions for Arista platforms
The ext4 flash uses acl to properly handle permissions in EOS.
Aboot isn't built with this support and therefore can't be used
to set the flash permissions. It has to be deferred in sonic initrd.
Including the following commit:
depmod to ensure that modules get loaded after ONIE install / image upgrade
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Including the following commits:
Add support for Dell S6100 and Z9100 module deinit (#18)
Disable S6100 low power mode by default (#19)
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* Add S8900-64XC SFP QSFP CPLD kernel module.
* Fixed QSFP function call in i2c_utils.sh.
* Add QSFP monitor service for SFP and QSFP SI.
Signed-off-by: Wade He <chihen.he@gmail.com>
change hwmon kernel modules installation order on S8810-32Q/S8900-54XC/S8900-64XC/S9100-32X
change hwmon kernel modules installation order in i2c_utils.sh and update related fancontrol file
Check the hwmon kernel module insertion order in /sys/class/hwmon/hwmonX.
w83795 should be in /sys/class/hwmon/hwmon1, and jc42 should be the last one.
change hwmon kernel modules installation order on S8810-32Q/S8900-54XC/S8900-64XC/S9100-32X
- What I did
Update Ingrasys submodule for S8900-54XC QSFP reset function.
- How I did it
Add reset init scripts in S8900-54XC init function.
- How to verify it
Used the command "sfputil reset Ethernet48" to verify reset function.
If no error occurs, it is passed.
- Description for the changelog
Update Ingrasys submodule for S8900-54XC QSFP reset function
- A picture of a cute animal (not mandatory but encouraged)
* Bump sonic-platform-modules-arista submodule
* Allow image specific mount option for containers
* Add led plugin for DCS-7060CX-32S
* Add led plugin for DCS-7260CX3-64
1. "make target/sonic-broadcom.raw" will create the compressed dd'able image.
2. This will also update the grub config files (device/dell/*/nos_to_sonic_grub.cfg) with the image versions.
* Bump sonic-platform-modules-arista submodule
* Fix sfputil plugin for arista_7060_cx32s
* Fix sfputil plugin for arista_7260cx3_64
* Add front panel port number for arista platforms
* [platform/Seastone] Add a new supported platform, Celestica Seastone-DX010.
Switch Vendor: Celestica
Switch SKU : Seastone-DX010
ASIC Vendor: Broadcom
Swich ASIC: Tomahawk
Port Configuration: 32x100G, 64x50G and 96x10G+16x50G.
SONiC Image: SONiC-ONIE-Broadcom
Signed-off-by: asang@celestica.com
* Help to convert tab to white space for Inventec-D7032Q28B platform.
* [docker-syncd-brcm]: Sleep to allow syncd to create socket before calling bcmcmd
* Instead of fixed sleep interval, continually check for presence of socket
* Remove exsiting sonic-platform-modules-accton and apply submodule adding on this folder.
* Remove redundant commnet
* Remove folder platform/broadcom/sonic-platform-modules-accton.
* Add this dir for submodule.
* Update submodule platform/broadcom/sonic-platform-modules-ingrasys
* Fixed FAN Status Setup Error.
* Add Drivers deinitialization feature.
* Allow for updating drivers on a running system.
* Let fans returned to full speed when driver uninstalled.
* Change S8900-64XC fancontrol config
* Delete S9100 syncd.conf
Signed-off-by: Wade He <chihen.he@gmail.com>
* Update submodule
* Fixed build error in fsroot on different kernel versions between host and rootfs.
* Fixed Read HW Revision in CPLD.
* rmmod check to avoid error.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Bump sonic-platform-modules-arista submodule
* Use sonic_sfputil plugin from the arista library
* Fix undefined variable varlog_size
* Prevent minigraph.xml to be removed from the flash
* Update DCS-7050QX-32 sensors config
Under rules/config now there's additional configuration option
ENABLE_SYNCD_RPC that allows building SONIC installer with
docker-syncd-*-rpc for evaluation purposes.
Signed-off-by: marian-pritsak <marianp@mellanox.com>
Fix the bug introduced by commit e6bb4b20a1
The previous commit mount /var/log into the docker which override
the original /var/log directory structure, causing swss docker failed to
start due to following errors.
Error: The directory named as part of the path /var/log/supervisor/supervisord.log
does not exist.
- [swss]: Update sairedis/swss/common submodules
- [orchagent]: Mount /var/log folder and use the folder to save recording files
- [orchagent]: Use -d to specify the folder path
- This PR allows supervisord to log syncd exit events to syslog
- Syncd dockers now are built from docker-config-engine instead of docker-base
- Supervisord in all syncd dockers now call syncd_start.s which is installed by sonic-sairedis repo
- Consolidate config.sh and start.sh scripts into one script (start.sh)
- Solve issue #435 - All dockers now run supervisord as their ENTRYPOINT
- All stdout/stderr output from processes managed by supervisord is now sent to syslog instead of their own files
- Supervisord log messages are now also sent to syslog
- Removed unused smartmontools package from docker-platform-monitor
- Extending SONiC building infrastructure to provide users
with greater flexibility, by allowing them to elect a
routing-stack different than the default one (quagga). The desired
routing-stack will be defined in rules/config file.
- As part of these changes I'm adding support for
Free-Range-Routing (FRR) stack. Quagga will continue to be
the default routing-stack.
Signed-off-by: Rodny Molina <rodny@linkedin.com>
- Update Broadcom libsaibcm debian package to 2.1.5.1-2
- Add SAI_NUM_ECMP_MEMBERS=32 to two Trident II platforms
- Update sonic-swss submodule version to support such changes
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
- Create /var/run/redis/ folder on the host
- Install Python client for Redis on the host
- Mount /var/run/redis/ as read/write from host for all dockers
- Enable accessing the database everywhere including on the host and from remote
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
The reason is that /etc/network/interfaces file is in base image. After booting,
docker-swss is not ready and thus the empty VLAN interfaces cannot be created
when the brctl is pointing to the binary inside the swss docker.
Add the bridge-utils into the base image and add bridge_ports none to the
/etc/network/interfaces file so that after boot-up the empty VLAN interfaces
will be created to let the members to join later.
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
* [files]: Add allow-hotplug stanza to interfaces files
- start interface <interface_name> when the kernel detects
a hotplug event from the interface
ref: https://www.debian.org/doc/manuals/debian-reference/ch05.en.html
* [interfaces]: Combine vlan_interfaces and lag_interfaces file and add allow-hotplug
1. Remove vlan_interfaces and lag_interfaces file and members in teamd.j2
2. Add all interfaces to /etc/network/interfaces file
3. Add allow-hotplug stanza
4. Add up <command> to automatically add interfaces to VLAN and LAG
5. Add unique_name filter to minigraph.py to remove duplicate interface names
6. Add brctl to base image
7. Update sonic-swss submodule
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
add_derived_package setup dependency between the main deb and derived deb.
The derived deb depends on the main deb and need to install the main deb.
add_extra_package does not setup dependency between the main deb and peer deb,
does not require to install the main deb.
* rename add_peer_packages to add_extra_packages
* [docker-config-engine]: introduce docker sonic config engine
sonic config engine provide the sonic configure engine for all sonic
dockers that rely on the engine to generate runtime configuration.
* Single image
* Fix review comments
* Update syncd service. Add HW mgmt to Mellanox single image.
* Add single image template for Broadcom platform.
SKU should be provided during configure:
make configure PLATFORM=broadcom SKU=Force10-S6000
* Add single image template for Cavium platform.
SKU should be provided during configure:
make configure PLATFORM=cavium SKU=AS7512
* Add description to sonic_debian_extension.j2 file.
* Build improvements
Fix dependencies
Add configuration options
Automatically build sonic-slave
* Set default number of jobs to 1
* Auto generate target/debs directory
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Automatically remove sonic-slave container after exit
* Silence clean-logs
* Add SONIC_CLEAN_TARGETS to clean
* Use second expansion for clean dependencies
* Avoid creating empty log files
Remove log file on flush instead of writing empty string
* Put dpkg install inside lock
Use same lock as debian install targets do to avoid
race condition in dpkg installation
* Remove redirect to log from docker save
* Add .platform dependency to all and clean targets
* Remove header and footer from clean targets
* Disable messages for SONIC_CLEAN_TARGETS
* Exit with error if dpkg-buildpackage fails
* Set new location for debs in build_debian.sh
* Add recipe for docker-database
* Update redis version to 3.2.4
* Add support for p4 platform
* Add recipe for snmpd
* Add slave targets to phony and make all target default
* Remove build.sh from thrift
* Add versioning to team, nl, hiredis and initramfs
* Change sonic-slave to support snmpd build from sources
* Remove src/tenjin
* Add recipe for lldpd
* Add recipe for mpdecimal
* Remove hiredis directory on rebuild
* Add recipe for Mellanox hw management
* Remove generic image from all targets for Mellanox
* Add support for python wheels
* Add lldp and snmp dockers
* Sync docker-database to include libjemalloc
* Fix asyncsnmp variable name
* Change default build configuration
Redirect output to log files by default
Set number of jobs to nproc value
Do not print dependencies
Fix logging to print log of failed job into console
* Use docker inspect to check if sonic-slave image exists
* Use config in slave.mk directly
* Disable color output by default
* Remove sswsdk dependency from lldp and snmp dockers
* Fix comment in py wheels install targets
* Add dependency between two versions of sswsdk
* Add containers to mellanox platform
lldp, snmp and database containers
* Add recipe for team docker
* Add team docker to mellanox platform
* Encrypt password passed to build_debian.sh
* Update mellanox SAI version
Make version and revision setting only in main recipe
* Fix error handling in makefiles
As makefiles use .ONESHELL we should add -e
option to shell options in order to exit after any command fails
* Add recipe for platform monitor image
* Add platfotm monitor to mellanox targets
* Ignore submodules when building base image
