- Why I did it
Fastboot will delay all counters in CONFIG DB, it relies on enable_counters.py to recover the delayed counters. However, enable_counters.py does not recover those non-default counters.
- How I did it
For non-default counters, if it is in CONFIG DB, put delay status to false after the waiting.
- How to verify it
Manual test
1ccda8d MACsec in Gearbox (#993)
7a2b824 Update SAI submodule (#1015)
418d5fb Add pre match logic for lag member (#1008)
Signed-off-by: Myron Sosyak <myronx.sosyak@intel.com>
#### Why I did it
When too many user login concurrently and run commands, SONiC may kernel panic on some device which has very limited memory.
#### How I did it
Add j2 template for setup pam_limit plugin for limit SSH session per-user.
#### How to verify it
Manually validate the j2 template can generate correct config file.
#### Which release branch to backport (provide reason below if selected)
- [x] 201811
- [ ] 201911
- [ ] 202006
- [x] 202012
- [x] 202106
- [x] 202111
#### Description for the changelog
Add j2 template for setup pam_limit plugin for limit SSH session per-user.
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
sonic-config-engine unit test is using invalid switch_type
How I did it
Update xml with correct switch_type
How to verify it
Run UT for sonic-config-engine
Signed-off-by: Gang Lv ganglv@microsoft.com
- Why I did it
Take new hw-mgmt release to SONiC, including:
New features:
1. hw-mgmt: add to PSU FW upgrade tool command to show current FW version
2. hw-mgmt: add to PSU FW upgrade tool support for single-PSU-in-the-system FW upgrade
3. hw-mgmt: add attribute “/firmware” to show FW version of restricted upgradable PSUs only
4. hw-mgmt: Add NVME temperature reports attributes (_alarm/_crit/_min/_max)
Bug fix:
1. psu: redundant i2c_addr attributes being created for psu 3 & 4 in system having only 2 psus.
2. hw-mgmt: in SPC1/2 i2c driver removal is too slow vs. ASIC reset causing non-functional log errors
3. PSU thresholds sysfs changed in 5.10 to “read only” preventing modification (modification required due PSU HW bug)
4. CPLD3 sysfs attribute missing after chip down/up flow
5. sysfs attributes missing when hw-mgmt is restarted (stop/start) within systemd
Release notes can be found from link https://github.com/Mellanox/hw-mgmt/blob/V.7.0020.2004/debian/Release.txt
- How I did it
Update hw-mgmt make file with new version number
Update hw-mgmt submodule pointer
- How to verify it
Run platform regression on all Mellanox platform
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
To support vlan sub intf short naming format, like subport Eth8.100 for parent portEthernet8 with vlan id 100.
How I did it
Add checks to must condition to verify there is a port or portchannel with the index same as the vlan sub intf.
How to verify it
Run the unttests.
- Why I did it
Implement read_eeprom/write_eeprom API for Credo Y-cable for Dual ToR Active-Standby
- How I did it
Use mlxreg utility for API implementation
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
Update sonic-utilities submodule to include below commits:
510a9b9 Add date to show version (#2086)
61b1396 [sfpshow][recycle_port] sfpshow script needs to skip recycle ports (#2109)
4681697 Support command `show ip fib` and `show ipv6 fib` (#2100)
2a982a1 Update `config mirror_session` CLI to support heximal gre type value (#2095)
b25f1e1 [generic-config-updater] Add caclrule validator (#2103)
968900c [sonic-package-manager] do not mod_config for whole config db when setting init_cfg (#2055)
bf55ceb [nvgre] Added auto-generated CLI plugins and test for NVGRE Tunnel feature (#1915)
8389c81 [sonic-cli-gen] fix failure "Error: digits_class" when field "digit_class" does not exist in DB (#2054)
f71ef64 Fix import statement in mclag.py (#2073)
Why I did it
Fix ENABLE_DOCKER_BASE_PULL not working issue in armhf/arm64
For build in native armhf/arm64, the expected container registry repo name is sonic-slave-<stretch|buster|bullseye>
How I did it
Publish the slave image to sonic-slave-<stretch|buster|bullseye>.
Why I did it
Support for show platform temp/fan for psu-temp and fan.
Original code doesn't has fan_drawer to support these information.
How I did it
Support for show platform temp/fan for psu-temp and fan.
Add fan_drawer.py and update thermal.py to add needed code.
It need PDDF common code to support . (Refer to #10213)
How to verify it
Test show platform temp and show platform fan.
root@as7726-32x-2:~# show platform fan
Drawer LED FAN Speed Direction Presence Status Timestamp
Fantray1 green Fantray1_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray1 green Fantray1_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray2 green Fantray2_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray2 green Fantray2_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray3 green Fantray3_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray3 green Fantray3_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray4 green Fantray4_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray4 green Fantray4_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray5 green Fantray5_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray5 green Fantray5_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray6 green Fantray6_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray6 green Fantray6_2 38% EXHAUST Present OK 20220311 08:13:04
N/A green PSU1_FAN1 23% EXHAUST Present OK 20220311 08:13:04
N/A green PSU2_FAN1 22% EXHAUST Present OK 20220311 08:13:04
root@as7726-32x-2:~# show platform temp
Sensor Temperature High TH Low TH Crit High TH Crit Low TH Warning Timestamp
PSU1_TEMP1 28 N/A N/A N/A N/A False 20220311 08:13:04
PSU2_TEMP1 25 N/A N/A N/A N/A False 20220311 08:13:04
TEMP1 23.5 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP2 27 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP3 24 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP4 27 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP5 24 80.0 N/A N/A N/A False 20220311 08:13:04
Co-authored-by: Jostar Yang <jostar_yang@accton.com.tw>
When do "skip_thermalcltd: true" will let "show platform fan" and "show platform temp" fail.
When enable thermalctld, these cmd will work well.
Signed-off-by: Jostar Yang <jostar_yang@accton.com.tw>
Why I did it
Fix host image debian package version issue.
The package dependencies may have issue, when some of debian packages of the base image are upgraded. For example, libc is installed in base image, but if the mirror has new version, when running "apt-get upgrade", the package will be upgraded unexpected. To avoid such issue, need to add the versions when building the host image.
How I did it
The package versions of host-image should contain host-base-image.
#### Why I did it
when adding and removing ports after init stage we saw two issues:
first:
In several cases, after removing a port, lldpmgr is continuing to try to add a port to lldp with lldpcli command. the execution of this command is continuing to fail since the port is not existing anymore.
second:
after adding a port, we sometimes see this warning messgae:
"Command failed 'lldpcli configure ports Ethernet18 lldp portidsubtype local etp5b': 2021-07-27T14:16:54 [WARN/lldpctl] cannot find port Ethernet18"
we added these changes in order to solve it.
#### How I did it
port create events are taken from app db only.
lldpcli command is executed only when linux port is up.
when delete port event is received we remove this command from pending_cmds dictionary
#### How to verify it
manual tests and running lldp tests
#### Description for the changelog
Dynamic port configuration - solve lldp issues when adding/removing ports
Why I did it
To reduce the processing time of rc.local, refactoring s6100 platform initialization.
Porting changes from 202012 branch [202012] Refactoring DELL platform init to reduce rc.local processing time #10171
Why I did it
Kernel hang in during early boot is caused due overwriting of device tree with uncompressing kernel. Added the fdt_high which gives a safe offset from kernel location.
How I did it
Setting uboot environment variable fdt_high.
How to verify it
Successful boot of bullseye kernel on Marvell Armada 380/385.
Change-Id: I3e2521780f5ecdb3bdf6cbb6542250814ca11959
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
Why I did it
Removing incorrect check in plt setup for fw_env config: This check was added before to compare 2 different types of disk. Now the check is redundant and check is not required as transition is complete.
2)Removing legacy_volume_label in create_partition: legacy_volume_label is not used in armhf install files. With legacy_volume_label initialized to NULL, current code will always return true for check, if demo_part exits.
How I did it
Change is about removing the redundant/incorrect code explained above.
How to verify it
uboot fw_printenv and fw_setenv is tested
onie-nos-install has be verified.
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
#### Why I did it
SONiC is migrating to bullseye. This will update the sonic-pins container to bullseye.
#### How I did it
The [sonic-pins code](https://github.com/Azure/sonic-buildimage/blob/master/rules/p4rt.mk) isn't dependent on any architecture so it will already build successfully for bullseye. This PR updates the docker to use bullseye.
#### How to verify it
Today we cannot build the docker-sonic-p4rt.gz target (e.g. Issue #9885). With this change the docker will build successfully. The P4RT executable will not run, because of a missing runtime library, libgmpxx, which I'll address in a followup PR.
#### Description for the changelog
Update docker-sonic-p4rt.gz target to build with Bullseye instead of Buster.
Why I did it
[Build]: Enable marvell-armhf PR check
Improve the azp dependencies, make the Test stage only depended on BuildVS stage. The Test stage will be triggered once the BuildVS stage finished, reduce the waiting time.
- Why I did it
Update NVIDIA Copyright header to "mellanox" files which were changed since 1.1.2022
- How I did it
Update the copyright header
- How to verify it
Sanity tests and PR checkers.
- Why I did it
Refactor SFP code to remove code duplication and to be able to use the latest features available in new APIs.
- How I did it
Refactor SFP code to remove code duplication and to be able to use the latest features available in new APIs.
- How to verify it
Run sonic-mgmt/platform_tests/sfp tests
For Bullseye, Python 2 isn't present at all. This means that in certain
build cases (such as building something only for Bullseye), the version
file may not exist, and so the sort command would fail.
For most normal build commands, this probably won't be an issue, because
the SONiC build will start with Buster (which has both Python 2 and
Python 3 wheels built), and so the py2 and py3 files will be present
even during the Bullseye builds.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Python 2 isn't installed by default in Buster and Bullseye containers,
and the scripts/modules can be used with Python 3, so make sure Python 3
is used.
Why I did it
After the Buster and Bullseye upgrade for the restapi container, processes will no longer start because supervisord is trying to call python and python2, both of which are unavailable.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
The following changes are provided to support bullseye and the latest master
branch content.
- Accommodate relocated fan and thermal sysfs entries in bullseye
- Add support for chassis and PSU HW revision
Why I did it
Fix platform issues introduced by the bullseye kernel upgrade.
How I did it
Minor fixes to Nokia ixs7215 platform code
How to verify it
Execute the following CLI commands
show platform summary
show platform fan
show platform temperature
Update sonic-py-swsssdk submodule to include below commits:
96c0590 [port_util] Fix issue: port_util.get_vlan_interface_oid_map should not raise exception when DB has not RIF data (#117)
96da8b9 [build] pin pytest-azurepipelines version (#119)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
#### Why I did it
Fixes https://github.com/Azure/sonic-utilities/issues/2049
from caclmgr:
- PRIORITY is a required field [code](3fa18d18d4/src/sonic-host-services/scripts/caclmgrd (L548))
- PACKET_ACTION is a required field [code](3fa18d18d4/src/sonic-host-services/scripts/caclmgrd (L581))
I think PRIORITY is a required field for ACLs not only CTRLPLANE ACLs
#### How I did it
Check code.
#### How to verify it
Unit-test
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
[Build]: Fix armhf mirrors not existing issue
The mirror endpoint debian-archive.trafficmanager.net does not support armhf, change to use deb.debian.org and security.debian.org.
#### Why I did it
To fix https://github.com/Azure/sonic-buildimage/issues/9643
#### How I did it
Instead of ast.literal_eval added python2 compat code for json strings unicode -> str convertion.
We need python2 compatibility since py2 sonic config engine (buster/sonic_config_engine-1.0-py2-none-any.whl target) is still included into the build (ENABLE_PY2_MODULES flag is set for buster). Once we abandon buster and python2, this compat and ast.literal_eval could be cleaned up all through the code base.
#### How to verify it
run steps from the linked issue
- Why I did it
With the previous MFT 4.18.1-16 there is a bug in mstdump tool accessing wrong address. it is confirmed this issue does not exist in official 4.18.0-106.
- How I did it
Update the MFT version to 4.18.0-106
- How to verify it
Run regression on Mellanox platforms
Why I did it
improvement of starting barefoot SDK
How I did it
restart of the interface for cleaning txquee through which communication takes place between Sonic and openBMC
How to verify it
run sonic autorestart tests
Why I did it
Add CPU thermal control for Nvidia platforms which will be enabled for platforms that have heavy CPU load. Now it is only enabled on 4800, and it will be enabled on future platforms.
How I did it
Check CPU pack temperature and update cooling level accordingly
How to verify it
Manual test
Added sonic-mgmt test case, PR link will update later
Why I did it
The current code assumes that the value part does not have whitespace. So everything after the whitespace will be ignored. The syseeprom values returned from platform API do not match the output of "show platform syseeprom" on dx010 and e1031 device.
How I did it
This change improved the regular expression for parsing syseeprom values to accommodate whitespaces in the value.
PR 10021 provides the solution, but committed to the wrong place for dx010 and e1031.
How to verify it
Compile the sonic_platform wheel for dx010, then upload to device and install the wheel, verify the platform eeprom API.
Signed-off-by: Eric Zhu <erzhu@celestica.com>
On some products the pci enumeration adds randomness into which nic gets
initialized first.
Because SONiC doesn't use deterministic interface naming but instead old
style interface naming, this leads to eth0 not always being the
management port.
To make sure eth0 is always the management port (SONiC expectation)
rename the interfaces in the initramfs for Arista products.
Why I did it
support to collect version when purging debian package
Support to collect version multiple times
How I did it
Add the collection action before purging.
Updating sonic-snmpagent submodule with the following commits
dae8146 [ci]: Support code diff coverage
6bd51c4 Fix: LAG counters, if LAG don't have L3 interface
2654f4a Fix snmp agent Initialize config DB multiple times issue
#### Why I did it
When change pycommon to use swsscommon UT failed in sonic-snmpagent, need submodule update with UT issue fix.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
[ci]: Support code diff coverage
Fix: LAG counters, if LAG don't have L3 interface
Fix snmp agent Initialize config DB multiple times issue
#### A picture of a cute animal (not mandatory but encouraged)
