Why I did it
To reduce the container's dependency from host system
Work item tracking
Microsoft ADO (number only):
17713469
How I did it
Move the k8s container startup script to config engine container, other than mount it from host.
How to verify it
Check file path(/usr/share/sonic/scripts/container_startup.py) inside config engine container.
Signed-off-by: Yun Li <yunli1@microsoft.com>
Co-authored-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* [chassis][lldp] Fix the lldp error log in host instance which doesn't contain front pannel ports
---------
Signed-off-by: mlok <marty.lok@nokia.com>
Co-authored-by: Marty Y. Lok <76118573+mlok-nokia@users.noreply.github.com>
What I did:
In FRR command update source <interface-name> is not at address-family level. Because of this
internal peer route-map for ipv6 were getting applied to ipv4 address family. As a result
TSA over iBGP for Ipv6 was not getting applied.
How I verify:
Manual Verification of TSA over both ipv4 and ipv6 after fix works fine.
Updated UT for this.
Added sonic-mgmt test gap: sonic-net/sonic-mgmt#8170
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
This PR is to add the following
Add a new options "--profile" to the show macsec command, to show all profiles in device
Update the currentl show macsec command, to show profile in each interface o/p. This will tell which macsec profile the interface is attached to.
catch system error and log as warning level instead of
error level in case interface was already deleted
Signed-off-by: Gokulnath-Raja <Gokulnath_R@dell.com>
* Remove apt package lists and make macro to clean up apt and python cache
Remove the apt package lists (`/var/lib/apt/lists`) from the docker
containers. This saves about 100MB.
Also, make a macro to clean up the apt and python cache that can then be
used in all of the containers. This helps make the cleanup be consistent
across all containers.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Currently the show and clear cli of dhcp_relayis may cause confusion.
How I did it
Add doc for it: [doc] Add docs for dhcp_relay show/clear cli sonic-utilities#2649
Add dhcp_relay config cli and test cases.
show dhcp_relay ipv4 helper
show dhcp_relay ipv6 destination
show dhcp_relay ipv6 counters
sonic-clear dhcp_relay ipv6 counters
How to verify it
Unit test all passed
#### Why I did it
Remove dialout as critical process as it is no longer used in prod. As part of future work, can remove dialout completely
#### How I did it
Remove from critical process list
Why I did it
DHCPv6 relay config entry is not useful while del dhcpv6 relay config.
How I did it
Remove dhcpv6_relay entry if it is empty and not check entry exist while adding dhcpv6 relay
Why I did it
Unify the Debian mirror sources
Make easy to upgrade to the next Debian release, not source url code change required. Support to customize the Debian mirror sources during the build
Relative issue: #12523
How I did it
How to verify it
Avoid traceback on sonic-clear command
sonic-clear dhcp6relay_counters
Traceback (most recent call last):
File "/usr/local/bin/sonic-clear", line 8, in <module>
sys.exit(cli())
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 764, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 717, in main
rv = self.invoke(ctx)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 1137, in invoke
return _process_result(sub_ctx.command.invoke(sub_ctx))
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 956, in invoke
return ctx.invoke(self.callback, **ctx.params)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 555, in invoke
return callback(*args, **kwargs)
File "/usr/local/lib/python3.9/dist-packages/clear/plugins/dhcp-relay.py", line 19, in dhcp6relay_clear_counters
counter = DHCPv6_Counter()
NameError: name 'DHCPv6_Counter' is not defined
- How I did it
Corrected the way to import using importlib
- How to verify it
Tested the sonic-clear command and verified no traceback is seen
Why I did it
To ensure, that after a BGP startup, dualtor T0 receives BGP updates before sending out BGP updates.
Please refer to sonic-net/SONiC#1161 for more details.
How I did it
add coalesce-time 10000 to the frr bgp startup config.
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Why I did it
In the PR sonic-net/sonic-platform-daemons#311 the table for updating the fabric asic was changed. This PR is update docker-init.sh to use the correct table to detect the fabric asic.
How I did it
update docker-init.sh
How to verify it
Check on chassis
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
The values for config_db "docker_routing_config_mode" are:
separated: FRR config generated from ConfigDB, each FRR daemon has its own config file
unified: FRR config generated from ConfigDB, single FRR config file
split: FRR config not generated from ConfigDB, each FRR daemon has its own config file
This commit adds:
split-unified: FRR config not generated from ConfigDB, single FRR config file
- How I did it
In docker_init.sh, when split-unified is used, the FRR configs are not generated
from ConfigDB. What's more, "service integrated-vtysh-config" is configured in vtysh.conf.
- How to verify it
FRR config not overwritten when FRR container starts.
Signed-off-by: Arnaud le Taillanter <a.letaillanter@criteo.com>
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
closes#12343
Today in SONiC the notify-keyspace-events is from DbInterface class when application try do any configdb set.
In Chassis the chassis_db may not get any configdb set operations, so there is chance this configuration will never be set.
So the chassis_db updates from one line card will not be propogated to other linecards, which are doing a psubscribe to get these event.
How I did it
update the redis.conf to set notify-keyspace-events AKE so that the notify-keyspace-events are set when the redis instance is started
How to verify it
Test on chassis
Why I did it
Add the missing debian source bullseye-updates/buster-updates
The build failure as below, it is caused by the docker image debian:bullseye used the version 2.31-13+deb11u5, but the version only available in bullseye-update.
- Skip the interface status check if the interface does not exist. In the future, when the interface is created/comes up this check will be triggered again.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
* Add smartmontools to pmon docker
* Set smartmontools to install version 7.2-1 in pmon to match host; clean up smartmontools build files
* Add comments on smartmontools version for both host and pmon
- Why I did it
Fixes#11431
- How I did it
dhcp6relay binds to ipv6 addresses configured on these vlan interfaces
Thus check if they are ready before launching dhcp6relay
- How to verify it
Unit Tests
Tested on a live device
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
test_sai_qos failed because of the following error:
"stderr_lines": [
"Traceback (most recent call last):",
" File \"/usr/bin/ptf\", line 522, in <module>",
" test_modules = load_test_modules(config)",
" File \"/usr/bin/ptf\", line 413, in load_test_modules",
" mod = imp.load_module(modname, *imp.find_module(modname, [root]))",
" File \"saitests/switch.py\", line 19, in <module>",
" import switch_sai_thrift",
"ImportError: No module named switch_sai_thrift"
],
It's because test_sai_qos runs ptf script which imports switch_sai_thrift, switch_sai_thrift is installed from python-saithrift_0.9.4_amd64.deb.
For master image, the deb file is for python3, but ptf only has virtual python3 environment, that's why we add --system-site-packages to allow virtual env to access system site-packeges.
Add thrift package in docker ptf virtual python3 env, because currently env-python3 doesn't have thrift module which is needed in switch_sai_thrift.
How I did it
Enable --system-site-packages for virtual py3 env in ptf docker and install thrift for test_qos_sai
How to verify it
load and login ptf conatiner
dpkg - i python-saithrift_0.9.4_amd64.deb
source /root/env-python3/bin/activate
python
import switch_sai_thrift.switch_sai_rpc
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
Why I did it
Migrate FRR to bullseye
How I did it
Makefile and docker config changes to refer to bullseye instead of buster.
How to verify it
Build bullseye frr docker.
Co-authored-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
Fix docker-database flush_unused_database failed issue: https://github.com/Azure/sonic-buildimage/issues/11597
When change flush_unused_database from use swsssdk to use swsscommon, get_instancelist() and get_dblist() name changed but not update.
Change flush_unused_database code to use swsscommon API:
Change get_instancelist to getInstanceList.
Change get_dblist to getDbList.
Pass all E2E test.
Manually check syslog make sure error log not exist and swss, syncd, bgp service started.
Search code in Azure make sure there all similer case are fixed in this PR.
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
Fix docker-database flush_unused_database failed issue: https://github.com/Azure/sonic-buildimage/issues/11597
When change flush_unused_database from use swsssdk to use swsscommon, get_instancelist() and get_dblist() name changed but not update.
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
At SWSS docker init time, check the device subtype and enable tunnel packet handler only if it is dualtor
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
ping command is not working inside PMON docker (bullseye)
Use case: chassisd checks for module reachability inside PMON for "show chassis modules midplane-status" CLI, and on Cisco chassis, this uses ping command to check network reachability
