This PR is part of the following HLD:
Persistent loglevel HLD: sonic-net/SONiC#1041
- Why I did it
After the Logger tables moved from the LOGLEVEL_DB to the CONFIG_DB and the jinja2_cache was deleted the LOGLEVEL_DB is not in use.
- How I did it
Removed the LOGLEVEL_DB from the SONiC code
- How to verify it
All tests were passed
- Why I did it
Pointer variable platform not initialized before use in get_num_of_asic of src/systemd-sonic-generator/systemd-sonic-generator.c. Then wild pointer will introduce undetermined exception when use in snprintf at line 545 .
Other pointers in this function like token will be assigned the value before use, and will not have such issue.
- How I did it
Initialized pointer platform to NULL when defined and before use.
Update sonic-py-swsssdk submodule pointer to include the following:
7f008a1 Fix UT test_BlockUseSwsssdk() (#128)
e30a1e1 Throw exception when not use swsssdk in UT. (#126)
Signed-off-by: dprital <drorp@nvidia.com>
- Why I did it
The values for config_db "docker_routing_config_mode" are:
separated: FRR config generated from ConfigDB, each FRR daemon has its own config file
unified: FRR config generated from ConfigDB, single FRR config file
split: FRR config not generated from ConfigDB, each FRR daemon has its own config file
This commit adds:
split-unified: FRR config not generated from ConfigDB, single FRR config file
- How I did it
In docker_init.sh, when split-unified is used, the FRR configs are not generated
from ConfigDB. What's more, "service integrated-vtysh-config" is configured in vtysh.conf.
- How to verify it
FRR config not overwritten when FRR container starts.
Signed-off-by: Arnaud le Taillanter <a.letaillanter@criteo.com>
Fix the issue where arp_update will not ping some of the ip's even
though they are in failed state since grep of that ip on ip neigh show
command does not do exact word match and can return multiple match.
swss update with following commits:
81f4ea9 orchagent/portsorch: Missing scheduler group after SWSS restart (#2174)
e557855 [SWSS] Innovium platform specific changes in PFC Detect lua script (#2493)
6e288dc New P4Orch development. (#2425)
ab0e474 swss: Fixing race condition for rif counters (#2488)
724f914 [tests] [asan] extend graceful stop flag to also stop syncd (#2491)
84642f3 [Dynamic buffer calculation][Mellanox] Enhance the logic to identify buffer pools and profiles (#2498)
e04bb43 Fix vs test issue: failed to remove vlan due to referenced by vlan interface (#2504)
52c561f Added LAG member check on addLagMember() (#2464)
Why I did it
Stopping of pmon after swss and syncd causes some ERROR logs in syslog. Also, this affects teamd downtime.
How I did it
Adjust warmboot shutdown order in make file
How to verify it
Build SONiC image, deploy to the target device and check /etc/sonic/warm-reboot_order content.
lldp mux nat radv sflow bgp pmon swss teamd syncd
Migrate multi-asic test jobs to TestbedV2.
Why I did it
Migrate multi-asic test jobs to TestbedV2.
How I did it
Add one parameter num_asic to create testplan.
Modify azure-pipelines.yml to run multi-asic on tbv2.
Signed-off-by: Yutong Zhang <yutongzhang@microsoft.com>
* Advance submodule sonic-utilities
d5a6da31 Do not configure physical attributes on port channels in portconfig (#2456)
48ee7722 Change db_migrator major version on master branch from version 3 to 4 (#2470)
f3746163 [GCU] Fix JsonPointerFilter bug (#2477)
58dbb3e6 YANG Validation for ConfigDB Updates: TACPLUS, TACPLUS_SERVER, AAA, VLAN_SUB_INTERFACE tables + decorated validated_mod_entry (#2452)
062f18a0 fix show interface neighbor expected empty issue (#2465)
569edf3b Fix display disorder problem of show mirror_session (#2447)
daaf0ffc Disable "tag as local" when reboot (#2451)
6621120b Fix sudo sfputil show error-status on a multiasic platform issue (#2373)
e8b1dcdf Add IP remove warnings for VRF commands (#2351)
40cc8e11 [scripts/generate_dump] add information to tech-support file (#2357)
8473517e Revert "[config reload]: On dual ToR systems, cache ARP and FDB table (#2460)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Advance sonic-platform-common
aa860837 Fix issue: rounding float value for txpower and rxpower (#320)
2052a63d Fix issue: copper cable should not display DOM information (#318)
cf4c6af7 CmisApi::get_application_advertisement catch AttributeError as well (#316)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Advance sonic-swss submodule to pick up new commits:
dbdf31c [counters] Improve performance by polling only configured ports buffer queue/pg counters sonic-net/sonic-swss#2473
ab4f804 [portsorch] remove port OID from saiOidToAlias map on port deletion sonic-net/sonic-swss#2483
ab29920 [QoS] Support dynamic headroom calculation for Barefoot platforms sonic-net/sonic-swss#2412
15beee4 Add support for voq counters in portsorch. sonic-net/sonic-swss#2467
c8d4905 [vlanmgr] Disable arp_evict_nocarrier for vlan host intf sonic-net/sonic-swss#2469
31c9321 [chassis][voq]Collect counters for fabric links sonic-net/sonic-swss#1944
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Migrate t0-sonic test jobs to TestbedV2.
Why I did it
Migrate t0-sonic test jobs to TestbedV2.
How I did it
Add two parameters to create testplan.
Modify azure-pipelines.yml to run t0-sonic on tbv2.
Signed-off-by: Yutong Zhang <yutongzhang@microsoft.com>
Why I did it
syseepromd in pmon crashes because of missing import in python script and doesn't get in running state
How I did it
Fix missing import issue to avoid python script failing
How to verify it
Boot system and wait till syseepromd gets into running state
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Why I did it
nameserver and domain entries from build system fsroot gets into sonic image.
How I did it
Clear /etc/resolv.conf before building image
How to verify it
Built image with it and verified with install that /etc/resolv.conf is empty
* Build docker-gbsyncd-broncos image
* Correct typo in LIBSAI_BRONCOS_URL_PREFIX
* Update docker-gbsyncd-broncos/Dockerfile.j2
* Enable debug shell support on docker-gbsyncd-broncos
* Include bcmsh in docker-gbsyncd-broncos
Why I did it
In docker-gbsyncd-broncos image, enable debug shell support for BRCM broncos PHY.
How I did it
How to verify it
Note: need enable attr SAI_SWITCH_ATTR_SWITCH_SHELL_ENABLE support in BCM PAI library
# bcmsh
Press Enter to show prompt.
Press Ctrl+C to exit.
NOTICE: Only one bcmsh or bcmcmd can connect to the shell at same time.
BRCM:> help
help
List of available commands
- h or help => Print command menu
- l => Print list of active ports on the PHY
- ps <port_id> <options> => Print port status
<options> => 1 -> Link status
=> 2 -> Link training failure status
=> 3 -> Link training RX status
=> 4 -> PRBS lock status
=> 5 -> PRBS lock loss status
- rd <port_id> <addr> <no of registers to read> => Read register contents
- wr <port_id> <addr> <data> => Write register data
- rrd <lanemap> <if_side> <addr> <no of registers to read> => Raw read register contents using lanemap and if_side (line = 0, system = 1)
- rwr <lanemap> <if_side> <addr> <data> => Raw write register data using lanemap and if_side (line = 0, system = 1)
- fw or firmware => Print firmware version of the PHY
- pd or port_dump <port_id> <flags> => Dump port status
- eyescan <port_id> => Display eye scan
- fec_status <port_id> => Get fec status of the port
- polarity <lanemap> <if_side> <TX polarity> <RX Polarity> => Set TX and RX polarity
<lanemap> => 0xF, 0xFF, or 0xFFFF based on number of lanes
<if_side > => Line = 0, System = 1
<TX/RX Polarity> =>_TX/RX Polarity bitmap of all lanes
Each bit represents a lane number.
E.g. Lane 0's polarity value (0 or 1) is populated in Bit 0.
- polarity <lanemap> <if_side> => Print TX and RX polarity
- lb <port_id> <lb_value> => Enable loopback on the port
lb_value = 0 -> Disable, 1 -> PHY, 2 -> MAC
- lb <port_id> => Print loopback configuration of the port
- prbs <port_id> <options> <val> => Set/Get PRBS configuration
<options> => 1 -> Get PRBS state and polynomial
2 -> Set PRBS Polynomial, <val> - PRBS Polynomial
Please refer to phy/chip documentation for valid values
3 -> Enable PRBS
<val> => 0 Disable PRBS
1 Enable both PRBS Transmitter and Receiver
2 Enable PRBS Receiver
3 Enable PRBS Transmitter
exit or q => Exit the diagnostic shell
bgpd.main.conf.j2: bugfix-9739
* Update bgpd.main.conf.j2 to gracefully handle the bgp configuration cases for when 'bgp_asn' is set to 'None', 'Null', or missing.
How I did it
Include a conditional statement to avoid configuring bgp in FRR when 'bgp_asn' is missing or set to 'None' or 'Null'
How to verify it
Configure 'bgp_asn' as 'None', 'Null' or have it missing from configurations and verify that /etc/frr/bgpd.conf does not have invalid bgp configurations like 'router bgp None'
Description for the changelog
Update bgpd.main.conf.j2 to gracefully handle the bgp configuration cases for when 'bgp_asn' is set to 'None', 'Null', or missing for bugfix 9739.
Signed-off-by: cchoate54@gmail.com
Why I did it
Unify the Debian mirror sources
Make easy to upgrade to the next Debian release, not source url code change required.
Support to customize the Debian mirror sources during the build
Relative issue: #12523
sonic-host-services submodule update with following changes
6eac2d3 Merge pull request #19 from judyjoseph/macsec_feature_enable
31c6108 Sync has_per_asic_scope attribute to config_db in all namespaces for multi-asic
185547f Add UT to improve coverage, for namespace config update
7c3aca0 macsec_supported info is part of DEVICE_RUNTIME_METADATA itself.
- Why I did it
Fix logrotate firstaction script to reflect correct size. The size was modified to change dynamically based on disk size. However this variable was not updated
#9504
- How I did it
Updated the variable based on disk size
- How to verify it
Verify in the generated rsyslog file if the variable is correctly generated from jinja template
- Why I did it
Update SN2201 dynamic minimum fan speed table according to data provided by the thermal team.
- How I did it
Update the thermal table in device_data.py
- How to verify it
Run platform related regression
Signed-off-by: Kebo Liu <kebol@nvidia.com>
686b9b1 Update Makefile to provision the ability of building with non-upstream patches (#296)
3b95205 [patch]: Introduce sysctl param `arp_evict_no_carrier` (#293)
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
Why I did it
Fixes#12614
How I did it
In the container_checker the database_chassis is added to expected container if device is supervisor
To detect the device is superviso, add supervisor=1 to the platform_env.conf of 7808 sup platform
How to verify it
run container_checker monit check
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
`subprocess.Popen()` and `subprocess.run()` is used with `shell=True`, which is very dangerous for shell injection.
`os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content
#### How I did it
Replace `os` by `subprocess`
Remove unused functions
Why I did it
In case the device contains more then one FAN drawer, the FANs name was incorrect.
How I did it
Passed max fan value to FAN object.
Fixed get_name() FAN API
How to verify it
show platform fan
Add dualtor test using TestbedV2 in buildimage repo.
Why I did it
Add dualtor test using TestbedV2 in buildimage repo.
How I did it
Add dualtor test using TestbedV2 in buildimage repo.
Signed-off-by: Yutong Zhang <yutongzhang@microsoft.com>
Why I did it
[Build] Fix the docker-sync not found issue
How I did it
When SONIC_CONFIG_USE_NATIVE_DOCKERD_FOR_BUILD not enabled, not to remove the docker-sync tag.
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
`subprocess` is used with `shell=True`, which is very dangerous for shell injection.
`os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content
#### How I did it
remove `shell=True`, use `shell=False`
Replace `os` by `subprocess`
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
`subprocess` is used with `shell=True`, which is very dangerous for shell injection.
#### How I did it
remove `shell=True`, use `shell=False`
#### How to verify it
Manual test
Pass UT
