Release Notes for Cisco 8102-32FH-O:
Fixed platform_test failures in test_component.py
IOFPGA_SJTAG label under ‘fwutil show status’ changed to IOFPGA’
Validated auto FPD upgrade
Why I did it
Fixes for
MIGSMSFT-333 / SR 696141124 - Fix OREDERED ECMP NHG drop when route is added before members are added
MIGSMSFT-333 / SR 696141124 – Fix port handling of empty ecmp group to drop packets
Why I did it
Release Notes for 8102-64H
• Fix NHG drop when route is added before members are added (MIGSMSFT-333 / SR 696141124)
• Added a new system device property "acl_set_dscp_encap_outer_only"
• IN_DISCARD counters report back per-port counters only instead of all counters that are per-port and also that are shared.
How I did it
Update platform version to 202205.2.2.12
Why I did it
Common Release Notes for 8102-64H, T0/DualTor, and 8101-32FH
Fix for an issue where drop counters were incrementing twice for packets with invalid tag
Fix for the ECC errors reported in SR 695600099
Fix for fwutil show updates failure
How I did it
Update platform version to 202205.2.2.11
Release Notes for Cisco T0 and 8102-64H.
• Fix for PSUD crash when PSUs are inserted in an operational system
• Fix for VxLAN counters not incrementing in show vxlan counter' and 'show platform npu vxlan counters'
• Fix for continuous error messages reported by thermalctld
• Fix for dshell client enable/disable causing syncd crash
• Support for 9100 TPID for Cisco fanout.
• Caveat: Drop counters for packets with invalid VLAN tag are counted twice.
Release Notes for Cisco 8101-32FH:
• Aikido FPD 1.89 Upgrade
Why I did it
Fix incorrectly specified table name in the extra queues and extra pgs j2 files for 8101-32FH-O
How I did it
Update platform module to 202205.2.2.7
Why I did it
Release Notes for Cisco 8101-32FH-O:
• Fixed a FEC lane related error message
• Implemented 'show platform npu mac-state -i ' CLI for NPU MAC information and save-state dump.
• Fixed a Mac Port SerDes credit mismatch error message
• Configurable drop counter support for SAI_DEBUG_COUNTER_ATTR_TYPE (MIGSMSFT-197)
• Removed eth1-midplane creation rule that is not needed for this platform.
• Fix to move control packets from queue 0 to queue 7
How I did it
Update platform version to 202205.2.2.5
Why I did it
Release Notes for Cisco 8101-32FH-O:
· Enable CMIS
· Enable Subport for Static Breakout
How I did it
Update platform version to 202205.2.2.2 (equivalent to 202205-v0.16)
Why I did it
Release Notes for Cisco 8808 platform:
Thermal sensor driver support
Release Notes for Cisco 8101-32FH-O:
Support for unwanted Alarm Suppression
How I did it
Update platform version to 202205.2.2.1 (v0.15)
How to verify it
Why I did it
Updated the port_alias name as per the SONiC HLD [b70bb0c7da/doc/sonic-port-name.md]
Updated channel number to breakout interfaces
How I did it
update platform version to 0.13
Why I did it
Chassis:
Fixed Multiple orchagent crashes due to BULK create failure
added new line card support
Addressed T2 snmp test failures
Addressed reboot issues
Chassis and Fixed:
Addressed dshell client issues
HWSKU name update from Cisco-8101-T32/Cisco-8101-C48T8 to Cisco-8101-O32/Cisco-8101-C48O8
How I did it
update to cisco version 0.12
Why I did it
Code drop with incremental fixes for Cisco 8808 and Cisco 8101-32FH-O platforms
Support for ordered ECMP capability
Support for BFD Serviceability CLI
Support for VxLAN Serviceability CLI
Support for 200G Fabric port speed for Fabric Card 8808-FC0 and Line Card 88-LC0-36FH-M/88-LC0-36FH-MO
PFC support for Q200 ASIC based line cards
Support for Single-TOR and Dual-TOR on Cisco 8102-64H-O Platform
How I did it
update cisco 8000 tag
How to verify it
Why I did it
Update Makefile, so it does the following:
For a given platform, verify if platform/checkout/.ini exists and hence run the platform/checkout/template.j2. This allows platform code to be checked out during the 'make configure' stage.
How I did it
git clone git@github.com:Azure/sonic-buildimage.git
mkdir platform/cisco-8000
make init
make configure PLATFORM=cisco-8000
make all
