There appears to be some network issue in the pipeline builds when
downloading packages from our mirror. Change the source to be from the
main debian repos to try to get around this issue.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
In the build in Bullseye, there are no png files available in the
specified installation source directory. For now, don't bother
installing those files.
This may end up being reverted later if there are indeed png files that
need to be installed for documentation.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Debian actually did a binNMU for snmpd, so to match the package version
we're building with the version in the offiical repos, that version
needs to be manually specified in the changelog.
Buster still needs 5.7.3, because there's a ABI change between 5.7.3 and
5.9 for libsnmp, so for Buster, make sure that 5.7.3 is built, and for
Bullseye, make sure that 5.9 is built.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Remove Python 2 package installation from the base image. For container
builds, reference Python 2 packages only if we're not building for
Bullseye.
For libyang, don't build Python 2 bindings at all, since they don't seem
to be used.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Python 2 is no longer available, so remove those packages, and remove
the pip2 commands. For picocom and systemd, just install from the
regular repo, since there's no backports yet.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Update the build rules in saibcm-modules to use the 5.10 kernel instead
of searching for the 4.19 kernel. In addition, some code changes were
done to get it to compile. The main categories of such changes are as
follows:
* For /proc files, `struct file_operations` has been replaced with
`struct proc_ops`.
* Y2038 changes to use the new APIs, since `do_gettimeofday()` is no
longer available.
* Minor changes in how external kernel module symbols are read by
modpost.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
All docker containers will be built as Buster containers, from a Buster
slave. The base image and remaining packages that are installed onto the
host system will be built for Bullseye, from a Bullseye slave.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Include validation of chassis dict in platform.json unit test
Based on: Azure/SONiC#768
How I did it
Update platform_json_checker to validate fields in chassis dict.
How to verify it
Verified that the unit test reports success for correct values of existing and capabilities fields in platform.json
Why I did it
Added Buffer yang files derived from sonic/mgmt-cvl/testdata/schema from sonic-mgmt-common, used by mgmt-framework.
Updated BUFFER_PG|({ifname},)*|{pg_num} to BUFFER_PG|{ifname}|{pg_num} in sonic-buffer-pg.yang.
This change is required for configuration migration for dynamic port breakout operation.
Added sonic-buffer-queue.yang for BUFFER_QUEUE
Tables: BUFFER_POOL, BUFFER_PROFILE, BUFFER_PG, BUFFER_QUEUE.
How I did it
Defined Yang models for BUFFER tables based on Guideline doc:
https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md
and
https://github.com/Azure/sonic-utilities/blob/master/doc/Command-Reference.md
How to verify it
sonic_yang_models package build.
Description for the changelog
MMU Buffer yang files (BUFFER_POOL/BUFFER_PROFILE/BUFFER_PG/BUFFER_QUEUE)
Build failed on a Ubuntu 20.04 system with kvm kernel, which does not have the /proc/sys/vm/compact_memory
Should check if compact_memory is writeable before doing it.
Signed-off-by: Chris Ward <tjcw@uk.ibm.com>
Updating sonic-utilities sub module with the following commits
63a5257 [TACACS+] Add config command for AAA authorization and accounting. (#1889)
8a8577b [dump] [copp] Fixed the NameError Exception for copp dump module (#1911)
84be8b4 Dump media_settings from appDB during fast-reboot (#1910)
563c416 Allow interface type value none (#1902)
095bf54 generic_updater: Fix service validator related issues (#1901)
efbe1f4 [chassis][supervisor][show][interfaces]show interfaces command warning on Supervisor card (#1771)
487b3b7 Add CRM CLIs for SRV6 nexthop and my_sid_entry (#1883)
With a Bullseye upgrade, a change that requires everything to get
rebuilt (including the slave containers) takes about 12 hours (the vs
job that builds the virtual switch image as well as the PTF container
sometimes times out towards the end). Part of this is because the kernel
is now built after all of the sonic containers (kernel is built in a
Bullseye slave, the docker containers are built in a Buster slave).
Another part is because during the ptf container build, for some reason,
all of the docker containers are rebuilt.
Therefore, to make sure PRs don't time out after Bullseye gets merged
in, bump up the timeout from 12 hours to 15 hours. This should be enough
for the builds to complete.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
52b7a47 (HEAD, origin/master, origin/HEAD) [schema]: MACsec statistics support (#520)
48d7d8a [ci]: use native arm64 and armhf pool to build (#552)
Signed-off-by: Ze Gan <ganze718@gmail.com>
The dhcp6relay rules file had a line overwriting a variable for
docker-dhcp-relay. Remove that line.
This line caused a limited impact where if some (many?) of the docker
containers were already built, except for dhcp-relay, and the build
failed or was interrupted, then dhcp-relay container would fail to build
because this variable was overwritten and the python3-swsscommon
wouldn't get installed into the slave container. Most builds would be
fine, though.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This PR allow user to set none value to interface type. So there is a way to achieve the goal via CLI:
config interface type XXX none
config interface speed XXX 10000
config interface type XXX CR
*Removing fake_platform environment variable. Following the merge of #9044 and Azure/sonic-swss#1978 the fake_platform environment variable is not used in any place and removing the stale references.
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
Including the below commits to update swss submodule
8448a60 [vs tests]Migrating sonic-swss tests to use hwsku instead of fakeplatform (#1978)
faa26db Fix random failure in PR/CI build. (#2006)
e03edb6 Allow interface type value none (#1991)
71b9650 [orchagent] Fix group name of port-buffer-drop in flexcounterorch.cpp (#1967)
facdef5 [VS test] Skip flaky virtual chassis test (#2004)
8261c1f [pytest]: Increase timeout when checking services (#2000)
67278be [teammgrd]: Handle LAGs cleanup gracefully on Warm/Fast reboot. (#1934)
e92c1df Enable FEC statistics collection for Ethernet ports (#1994)
9f30ca1 VxLAN Tunnel Counters and Rates implementation (#1859)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
[TACACS+] Add Config DB schema and HostCfg Enforcer plugin to support TACACS+ per-command authorization&accounting. (#9029)
#### Why I did it
Support TACACS per-command authorization&accounting.
#### How I did it
Change ConfigDB schema and HostCfg enforcer.
Add UT to cover changed code.
#### How to verify it
Build following project and pass all UTs:
make target/python-wheels/sonic_host_services-1.0-py3-none-any.whl
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add Config DB schema and HostCfg Enforcer plugin to support TACACS+ per-command authorization&accounting.
#### A picture of a cute animal (not mandatory but encouraged)
Added get_system_mac support for cisco-8000 device
Why I did it
This is required to assign unique MACs to namespaces on Backend and Frontend asics
for cisco-8000 platforms
How I did it
Add vendor specific hook in get_system_mac. The MAC address are read from /profile.ini
file
How to verify it
config load_minigraph on a multi-asic system
config save
check mac addresses in DEVICE_METADATA section in each config_db json file
Why I did it
During swss container startup, if ndppd starts up before/with vlanmgrd, ndppd will be pinned at nearly 100% CPU usage.
How I did it
Only start ndppd after vlanmgrd is running. Also, call ndppd directly instead of through bash for improved logging and to prevent orphaned processes.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
