- Why I did it
Remove obsolete parameter that enables static VXLAN src port range
provide functionality no generate json config file according to appropriate parameter in config_db
Done for
SN3800:
• Mellanox-SN3800-D28C50
• Mellanox-SN3800-C64
• Mellanox-SN3800-D28C49S1 (New 10G SKU)
SN2700:
• Mellanox-SN2700-D48C8
- How I did it
Remove SAI_VXLAN_SRCPORT_RANGE_ENABLE=1 from appropriate sai.profile files
Created vxlan.json file and added few params that depends on DEVICE_METADATA.localhost.vxlan_port_range
- How to verify it
File /etc/swss/config.d/vxlan.json should be generated inside swss docker when it restart
[
{
"SWITCH_TABLE:switch": {
"vxlan_src": "0xFF00",
"vxlan_mask": "8"
},
"OP": "SET"
}
]
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
* [y_cable] Support for initialization of new Daemon ycable to support
ycables
This PR also adds the commit in sonic-platform-daemons
94fa239 [y_cable] refactor y_cable to a seperate logic and new daemon from xcvrd (#219)
Why I did it
This PR separates the logic of Y-Cable from xcvrd. Before this change we were utilizing xcvrd daemon to control all aspects of Y-Cable right from initialization to processing requests from other entities like orch,linkmgr.
Now we would have another daemon ycabled which will serve this purpose.
Logically everything still remains the same from the perspective of other daemons.
it also take care aspects like init/delete daemon from Y-Cable perspective.
How I did it
To serve the purpose we build a new wheel sonic_ycabled-1.0-py3-none-any.whl and install it inside pmon.
We also initalize the daemon ycabled which serves our purpose for refactor inside pmon
How to verify it
Ran the changes with an image for dualtor tests on a 7050cx3 platform
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
Add TSA/B/C dualtor support
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
For TSA, toggle all the mux to standby if the device type is dualtor and there are active mux ports.
For TSC, add mux status output.
How to verify it
Run TSA/B/C on a dualtor setup
As part of this, update the isc-dhcp package to match the Bullseye
version (this fixes some compile errors related to BIND), clean up some
of the build dependencies and runtime dependencies for debian packaging,
and use the default Boost version to compile against instead of
explicitly saying using 1.74.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
resolves https://github.com/Azure/sonic-buildimage/issues/8779
snmpd writes the below error message in syslog :
snmp#snmpd[27]: truncating integer value > 32 bits
This message is written in syslog when the hrSystemUptime(1.3.6.1.2.1.25.1.1.0 / system uptime) or sysUpTime(1.3.6.1.2.1.1.3 network management portion or snmpd uptime) is queried when either of these counters overflow beyond 32 bit value. This happens the device uptime or snmpd uptime is more than 497 days.
#### How I did it
Reference: https://access.redhat.com/solutions/367093 and https://linux.die.net/man/1/snmpcmd
To avoid seeing this message if the counter grows, the snmpd error log level is changed to display LOG_EMERG, LOG_ALERT, LOG_CRIT, and LOG_DEBUG.
Without this change, LOG_ERR and LOG_WARNING would also be logged in syslog.
#### How to verify it
On a device which is up for more than 497 days, modify supervisord.conf with the change and restart snmp.
Query 1.3.6.1.2.1.1.3 and verify that log message is not seen.
Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
Why I did it
Arista 7060 platform has a rare and unreproduceable PCIe timeout that could possibly be solved with increasing the switch PCIe timeout value. To do this we'll call a script for this platform to increase the PCIe timeout on boot-up.
No issues would be expected from the setpci command. From the PCIe spec:
"Software is permitted to change the value in this field at any
time. For Requests already pending when the Completion
Timeout Value is changed, hardware is permitted to use either
the new or the old value for the outstanding Requests, and is
permitted to base the start time for each Request either on when
this value was changed or on when each request was issued. "
How I did it
Add "platform-init" support in swss docker similar to how "hwsku-init" is called, only this would be for any device belonging to a platform. Then the script would reside in device data folder.
Additionally, add pciutils dependency to docker-orchagent so it can run the setpci commands.
How to verify it
On bootup of an Arista 7060, can execute:
lspci -vv -s 01:00.0 | grep -i "devctl2"
In order to check that the timeout has changed.
- Create a script in the orchagent docker container which listens for these encapsulated packets which are trapped to CPU (indicating that they cannot be routed/no neighbor info exists for the inner packet). When such a packet is received, the script will issue a ping command to the packet's inner destination IP to start the neighbor learning process.
- This script is also resilient to portchannel status changes (i.e. interface going up or down). An interface going down does not affect traffic sniffing on interfaces which are still up. When an interface comes back up, we restart the sniffer to start capturing traffic on that interface again.
Why I did it
To enable test support for BFD-related features, the PTF docker needs to have the proper support for BFD. This PR aims to add BFD support in ptf docker.
How I did it
Clone and build OpenBFDD for PTF docker.
How to verify it
Build locally and verify BFD is supported.
What I did:
Updated Jinja Template to enable BGP Graceful Restart based on device role. By default it will be enable only if the device role type is TorRouter.
Why I did:-
By default FRR is configured in Graceful Helper mode. Graceful Restart is needed on T0/TorRouter only since the device can go for warm-reboot. For T1/LeafRouter it need to be in Helper mode only
- Add INCLUDE_PINS to config to enable/disable container
- Add Docker files and supporting resources
- Add sonic-pins submodule and associated make files
Submission containing materials of a third party:
Copyright Google LLC; Licensed under Apache 2.0
#### Why I did it
Adds P4RT container to SONiC for PINS
The P4RT app is covered by this HLD:
https://github.com/pins/SONiC/blob/master/doc/pins/p4rt_app_hld.md
#### How I did it
Followed the pattern and templates used for other SONiC applications
#### How to verify it
Build SONiC with INCLUDE_P4RT set to "y".
Verify that the resulting build has a container called "p4rt" running.
You can verify that the service is up by running the following command on the SONiC switch:
```bash
sudo netstat -lpnt | grep p4rt
```
You should see the service listening on TCP port 9559.
#### Which release branch to backport (provide reason below if selected)
None
#### Description for the changelog
Build P4RT container for PINS
Updated BGP Template for the case:
1. For Packet Chassis do not advertise Loopback4096 address into BGP as there is Static Route for same.
Having this route in BGP causes two level of recursion in Zebra and cause assert in Zebra
when there are many nexthop involved
2. Advertise only P2P Connected IP's into BGP (External Peers). For Packet chassis we have backend IP Interface subnet and if
they get advertised into BGP then it also causes recursion
The BGP_VOQ_CHASSIS_NEIGHBOR keepalive and holdtime timers are
configured similar to general neighbors. Changes are done to configure
BGP_VOQ_CHASSIS_NEIGHBOR timers similar to BGP_INTENAL_NEIGBOR since voq
chassis bgp neighbors are similar to bgp internal neighbors in
multi-asic. As it is done for bgp internal neighbors, the keepalive and
holdtime timers are set to 3 and 10 seconds respectively. Also similar
to bgp internal neighbors, connection retry timer is also configured for
voq chassis bgp neighbors.
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
Fixes#9376
Because /etc/passwd and /etc/group have been overwritten with symlinks
to /host_etc/passwd and /host_etc/group, the debug container build
fails. This is because the debug container is built without /etc being
mounted at /host_etc in the container (which does happen at runtime).
Because of that, /etc/passwd and /etc/group don't exist, which causes
some package installation errors when openssh-client tries to create a
group.
This is a partial revert of 1347f29178.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
resolves#8979 and #9055
How I did it
Remove the file static.conf.j2,which adds the default route on eth0 from bgp docker
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
This is to update the common sonic-buildimage infra for reclaiming buffer.
- How I did it
Render zero_profiles.j2 to zero_profiles.json for vendors that support reclaiming buffer
The zero profiles will be referenced in PR [Reclaim buffer] Reclaim unused buffers by applying zero buffer profiles #8768 on Mellanox platforms and there will be test cases to verify the behavior there.
Rendering is done here for passing azure pipeline.
Load zero_profiles.json when the dynamic buffer manager starts
Generate inactive port list to reclaim buffer
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* [ACL] enable ACL FC when genereting config from minigraph but disable by default
Why I did it
To support ACL counters on Flex Counter Infrastructure.
How I did it
Enable ACL FC in init_cfg and minigraph. Disable when genereting configuration from preset.
How to verify it
Together with depends PRs. Run ACL/Everflow test suite.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
Why I did it
During swss container startup, if ndppd starts up before/with vlanmgrd, ndppd will be pinned at nearly 100% CPU usage.
How I did it
Only start ndppd after vlanmgrd is running. Also, call ndppd directly instead of through bash for improved logging and to prevent orphaned processes.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
What I did:
Fix the typo in Internal Peer Group template for Packet-based Chassis.
Address Review comments of PR: [chassis-packet] minigraph parsing and BGP template changes #8966
- Static Route Parsing for Host
- Formatting of chassis port_config.ini
#### Why I did it
Nokia IXR7250E platform requires grpcio, grpcio-tools python library, and libprotobuf-dev, libgrpc++ library
#### How I did it
Modified the build_debian.sh install libprotobuf-dev and libgrpc++ to support nokia ndk
Modified the sonic_debian_extension.j2 to install the grpcio and grpcio-tools in the host
Modified the docker-platform-monitor/Dockerfile.js to install grpcio and grpcio-tools for the pmon container.
#### How to verify it
Image running success.
Why I did it
"chassis_db_init" task of PMON should be skipped on Mellanox simx platform, since the hardware info which this task is trying to access is not available on simx platforms, It will introduce some error log.
How I did it
Add the capability for "chassis_db_init" in the template for it can be skipped by adding configuration in "pmon_daemon_control.json".
add "skip_chassis_db_init" configuration for simx platforms.
use symbol link for "pmon_daemon_control.json" since all the simx platforms share the same configuration
How to verify it
Build an image and install it on simx platform to check whether "chassis_db_init" task is skipped.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Fix the check used to wait for interfaces to come up. The group name in
the supervisor config files has changed from isc-dhcp-relay to
dhcp-relay.
Also, in the wait script, wait 10 additional seconds after the vlans,
port channels, and any interfaces are up. This is because dhcrelay
listens on all interfaces (in addition to port channels and vlans), and
to ensure that it stays in a clean state during runtime, wait some extra
time to make sure that those interfaces are created as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
**Import issue will cause:**
root@sonic:/# sudo sonic-clear arp
failed to import plugin clear.plugins.dhcprelay: No module named 'show_dhcp_relay'
#### How I did it
Fix the import.
#### How to verify it
run sudo sonic-clear arp
1. Changes for Generation LC-Graph for packet-based chassis.
2. Added Support Ipv6 Peering on Loopback4096 for voq also
3. Updated asic topology yml files to be offset of slot
4. Made slot_num to take string slot<number> instead of number
5. Consolidated template_dpg_voq_asic.j2 into dpg_asic.j2
6. Remove Loopback4096 from asic topology and parse as dut invertory for
multi-asic
7. Updated topo_facts parsing for asic topology_
8. Internal BGP Session rename from <VoqChassisInternal> to <ChassisInternal> and take switch_type as value.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Linkmgrd monitors link status, mux status, and link state. Has
the link becomes unhealthy, linkmgrd will trigger mux switchover
on a standby ToR ensuring uninterrupted service to servers/blades.
This PR is initial implementation of linkmgrd.
Also, docker-mux container hold packages related to maintaining and managing
mux cable. It currently runs linkmgrd binary that monitor and switches
the mux if needed.
This PR also introduces mux-container and starts linkmgrd as startup when
build is configured with INCLUDE_MUX=y
Edit: linkmgrd PR will follow.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Related work items: #2315, #3146150
