Why I did it
sonic-mgmt is failing tests due to invalid test data in platform.json
Fwutil is upset the chassis name in the platform_component.json of the 7060CX-32S
How I did it
Fixed the aforementioned issues
Why I did it
There is rare condition, emc2305 hold SMBus and cause SMBus completion wait timed out.
How I did it
Enable EMC2305 SMBus timeout feature, 30ms period of inactivity will reset the interface.
How to verify it
Use 'i2cget -y -f 23 0x4d 0x20 b' to read EMC2305 configuration register and check DIS_TO bit not set.
Signed-off-by: Eric Zhu <erzhu@celestica.com>
* [YANG] Add MUX_CABLE yang model (#11797)
Why I did it
Address issue #10970
sign-off: Jing Zhang zhangjing@microsoft.com
How I did it
Add sonic-mux-cable.yang and unit tests.
How to verify it
Compile Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl and target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl.
Pass sonic-config-engine unit test.
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Description for the changelog
Link to config_db schema for YANG module changes
f8fe41a023/src/sonic-yang-models/doc/Configuration.md (mux_cable)
* [YANG] add peer switch model (#11828)
Why I did it
Address issue #10966
sign-off: Jing Zhang zhangjing@microsoft.com
How I did it
Add sonic-peer-switch.yang and unit tests.
How to verify it
Compile Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl and target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl.
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Description for the changelog
Link to config_db schema for YANG module changes
b721ff87b9/src/sonic-yang-models/doc/Configuration.md (peer-switch)
src/sonic-swss
* 6a193e0 - (HEAD -> 202205, origin/202205) [Dual-ToR][ACL] bind LAG to ACL table in order to guarantee rule coverage if lag menber will be added to LAG after binding (#2749) (5 hours ago) [Andriy Yurkiv]
Why I did it
Release Notes for Cisco 8101-32FH-O:
• Fixed a FEC lane related error message
• Implemented 'show platform npu mac-state -i ' CLI for NPU MAC information and save-state dump.
• Fixed a Mac Port SerDes credit mismatch error message
• Configurable drop counter support for SAI_DEBUG_COUNTER_ATTR_TYPE (MIGSMSFT-197)
• Removed eth1-midplane creation rule that is not needed for this platform.
• Fix to move control packets from queue 0 to queue 7
How I did it
Update platform version to 202205.2.2.5
Why I did it
After docker_inram is enabled, the docker folder's default max size is 1.5G.
It's not big enough for some tests which need to install additional docker images or install extra packages.
Work item tracking
Microsoft ADO 24199761:
How I did it
add docker_inram into cmdline_allowlist
How to verify it
sudo sh -c 'echo "docker_inram_size=3000M" >> kernel-cmdline-append'
sudo reboot and check the docker folder size
* Re-add 127.0.0.1/8 when bringing down the interfaces
With #5353, 127.0.0.1/16 was added to the lo interface, and then
127.0.0.1/8 was removed. However, when bringing down the lo interface,
like during a config reload, 127.0.0.1/16 gets removed, but 127.0.0.1/8
isn't added back to the interface. This means that there's a period of
time where 127.0.0.1 is not available at all, and services that need to
connect to 127.0.01 (such as for redis DB) will fail.
To fix this, when going down, add 127.0.0.1/8. Add this address before
the existing configuration gets removed, so that 127.0.0.1 is available
at all times.
Note that running `ifdown lo` doesn't actually bring down the loopback
interface; the interface always stays "physically" up.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
src/sonic-utilities
* 0b878087 - (HEAD -> 202205, origin/202205) Add display support for serial field in show chassis modules status CLI (#2858) (4 days ago) [amulyan7]
src/sonic-swss
* 2aec547 - (HEAD -> 202205, origin/202205) [pfcwd] Enhance DLR_INIT based recovery and DLR_PACKET_ACTION for broadcom platforms (#2807) (4 days ago) [Neetha John]
* fa4acd3 - Fix to substract the macsec sectag size from port MTU during InitializePort (#2789) (5 days ago) [judyjoseph]
Why I did it
Work item tracking
Microsoft ADO (24182162):
How I did it
update the config.bcm to set the default fec RS 100G Linecard
How to verify it
Tests on chassis
src/sonic-utilities
* cd08aa69 - (HEAD -> 202205, origin/202205) [show][muxcable] add some new commands health, reset-cause, queue_info support for muxcable (#2853) (2 days ago) [vdahiya12]
* 4b96bd7e - Update pcieutil error message on loading common pcie module (#2786) (6 days ago) [cytsao1]
* 77b725ca - Fix the show interface counters throwing exception on device with no external interfaces (#2851) (6 days ago) [abdosi]
Why I did it
Don't auto update package version for release branch.
Work item tracking
Microsoft ADO (number only): 22335854
How I did it
How to verify it
Why I did it
Update cable length for uplink/downlink ports for chassis and and update PG/pool headroom size accordingly.
Work item tracking
17880812
How I did it
Updated cable length as well as buffer config in HWSKU files.
* [Arista] Fix boot0 code for docker_inram
Enable docker_inram for all systems with 4GB or less of flash.
This is mandatory to allow these systems to store 2 SONiC images.
This change also fixes the missing docker_inram attribute when
installing a new image from SONiC.
Because the SWI image can ship with additional kernel parameters within
such as `sonic_fips=` this lead to a conflict.
To prevent the conflict, the extra kernel parameters from the SWI are
now stored in the file `kernel-cmdline-append` which isn't used anywhere.
* Add optional zram compression for docker_inram
Some devices running SONiC have a small storage device (2G and 4G mainly)
The SONiC image growth over time has made it impossible to install
2 images on a single device.
Some mitigations have been implemented in the past for some devices but
there is a need to do more.
One such mitigation is `docker_inram` which creates a `tmpfs` and
extracts `dockerfs.tar.gz` in it.
This all happens in the SONiC initramfs and by ensuring the installation
process does not extract `dockerfs.tar.gz` on the flash but keep the file as is.
This mitigation does a tradeoff by using more RAM to reduce the disk footprint.
It however creates new issues for devices with 4G of system memory since
the extracted `dockerfs.tar.gz` nears the 1.6G.
Considering debian upgrades (with dual base images) and the continuous
stream of features this is only going to get bigger.
This change introduces an alternative to the `tmpfs` by allowing a system
to extract the `dockerfs.tar.gz` inside a `zram` device thus bringing
compression in play at the detriment of performance.
Introduce 2 new optional kernel parameters to be consumed by SONiC initramfs.
- `docker_inram_size` which represent the max physical size of the
`zram` or `tmpfs` volume (defaults to DOCKER_RAMFS_SIZE)
- `docker_inram_algo` which is the method to use to extract the
`dockerfs.tar.gz` (defaults to `tmpfs`)
other values are considered to be compression algorithm for `zram`
(e.g `zstd`, `zlo-rle`, `lz4`)
Refactored the logic to mount the docker fs in the SONiC initramfs under
the `union-mount` script.
Moved the code into a function to make it cleaner and separated the
inram volume creation and docker extraction.
On Arista platform with a flash smaller or equal to 4GB set
`docker_inram_algo` to `zstd` which produces the best compression ratio
at the detriment of a slower write performance and a similar read
performance to other `zram` compression algorithms.
Why I did it
To improve readability of config.bcm, fixed the alignment of soc properties
How to verify it
Build sonic_config_engine-1.0-py3-none-any.whl successfully
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
For security and consistency consideration, change the docker image from alpine to Debian in Makefile
Work item tracking
Microsoft ADO (number only): 23077660
How I did it
change the docker image from alpine to Debian in Makefile
Why I did it
Update soc properties for certain roles that need to use pfcwd dlr init based recovery mechanism
How to verify it
Updated the templates on a 7050cx3 dual tor and 7260 T1 which satisfies these conditions and validated pfcwd recovery which uses DLR_INIT based mechanism. Also validated that this mechanism is not used on 7050cx3 single tor with the updated templates
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Our k8s feature will pull new version container images for each upgrade, the container images inside sonic will be more and more, but for now we don’t have a way to clean up the old version container images, the disk may be filled up. Need to add cleaning up the old version container images logic.
Work item tracking
Microsoft ADO (number only):
17979809
How I did it
Remove the old version container images besides the feature's current version and last version image, last version image is saved for supporting fallback.
How to verify it
Check whether the old version images are removed
Co-authored-by: lixiaoyuner <35456895+lixiaoyuner@users.noreply.github.com>
