DNX fixes:
CS00012287482 - support for 1024 LAGs on DNX
Other changes (XGS fixes)
SID - L3 multicast packet drop due to wrong VFI derivation - SDK-350470
SID - SIGSEGV in linkscan callback delivery - SDK-287578
SID - Repeated VXLAN calls deletes vlan translation action profile SDK-313980
SER - error in IS_TDM_CALENDAR0/1 can cause traffic hit in TH
SID - L2_ENTRY Table Lookups May Miss
[CSP CS00012275452] sai_object_type_get_availability failed with SAI_STATUS_INVALID_PARAMETER
Why I did it
Update the definition of acl table type BMCDATA and BMCDATAV6 in minigraph parser.
Work item tracking
Microsoft ADO (number only): 24101023
How I did it
Update the definition of acl table type BMCDATA and BMCDATAV6 in minigraph parser.
How to verify it
Ran unittest to verify this update:
Co-authored-by: Zhijian Li <zhijianli@microsoft.com>
Why I did it
sonic-mgmt is failing tests due to invalid test data in platform.json
Fwutil is upset the chassis name in the platform_component.json of the 7060CX-32S
How I did it
Fixed the aforementioned issues
Why I did it
There is rare condition, emc2305 hold SMBus and cause SMBus completion wait timed out.
How I did it
Enable EMC2305 SMBus timeout feature, 30ms period of inactivity will reset the interface.
How to verify it
Use 'i2cget -y -f 23 0x4d 0x20 b' to read EMC2305 configuration register and check DIS_TO bit not set.
Signed-off-by: Eric Zhu <erzhu@celestica.com>
* [YANG] Add MUX_CABLE yang model (#11797)
Why I did it
Address issue #10970
sign-off: Jing Zhang zhangjing@microsoft.com
How I did it
Add sonic-mux-cable.yang and unit tests.
How to verify it
Compile Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl and target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl.
Pass sonic-config-engine unit test.
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Description for the changelog
Link to config_db schema for YANG module changes
f8fe41a023/src/sonic-yang-models/doc/Configuration.md (mux_cable)
* [YANG] add peer switch model (#11828)
Why I did it
Address issue #10966
sign-off: Jing Zhang zhangjing@microsoft.com
How I did it
Add sonic-peer-switch.yang and unit tests.
How to verify it
Compile Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl and target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl.
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Description for the changelog
Link to config_db schema for YANG module changes
b721ff87b9/src/sonic-yang-models/doc/Configuration.md (peer-switch)
src/sonic-swss
* 6a193e0 - (HEAD -> 202205, origin/202205) [Dual-ToR][ACL] bind LAG to ACL table in order to guarantee rule coverage if lag menber will be added to LAG after binding (#2749) (5 hours ago) [Andriy Yurkiv]
Why I did it
Release Notes for Cisco 8101-32FH-O:
• Fixed a FEC lane related error message
• Implemented 'show platform npu mac-state -i ' CLI for NPU MAC information and save-state dump.
• Fixed a Mac Port SerDes credit mismatch error message
• Configurable drop counter support for SAI_DEBUG_COUNTER_ATTR_TYPE (MIGSMSFT-197)
• Removed eth1-midplane creation rule that is not needed for this platform.
• Fix to move control packets from queue 0 to queue 7
How I did it
Update platform version to 202205.2.2.5
Why I did it
After docker_inram is enabled, the docker folder's default max size is 1.5G.
It's not big enough for some tests which need to install additional docker images or install extra packages.
Work item tracking
Microsoft ADO 24199761:
How I did it
add docker_inram into cmdline_allowlist
How to verify it
sudo sh -c 'echo "docker_inram_size=3000M" >> kernel-cmdline-append'
sudo reboot and check the docker folder size
* Re-add 127.0.0.1/8 when bringing down the interfaces
With #5353, 127.0.0.1/16 was added to the lo interface, and then
127.0.0.1/8 was removed. However, when bringing down the lo interface,
like during a config reload, 127.0.0.1/16 gets removed, but 127.0.0.1/8
isn't added back to the interface. This means that there's a period of
time where 127.0.0.1 is not available at all, and services that need to
connect to 127.0.01 (such as for redis DB) will fail.
To fix this, when going down, add 127.0.0.1/8. Add this address before
the existing configuration gets removed, so that 127.0.0.1 is available
at all times.
Note that running `ifdown lo` doesn't actually bring down the loopback
interface; the interface always stays "physically" up.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
src/sonic-utilities
* 0b878087 - (HEAD -> 202205, origin/202205) Add display support for serial field in show chassis modules status CLI (#2858) (4 days ago) [amulyan7]
src/sonic-swss
* 2aec547 - (HEAD -> 202205, origin/202205) [pfcwd] Enhance DLR_INIT based recovery and DLR_PACKET_ACTION for broadcom platforms (#2807) (4 days ago) [Neetha John]
* fa4acd3 - Fix to substract the macsec sectag size from port MTU during InitializePort (#2789) (5 days ago) [judyjoseph]
Why I did it
Work item tracking
Microsoft ADO (24182162):
How I did it
update the config.bcm to set the default fec RS 100G Linecard
How to verify it
Tests on chassis
src/sonic-utilities
* cd08aa69 - (HEAD -> 202205, origin/202205) [show][muxcable] add some new commands health, reset-cause, queue_info support for muxcable (#2853) (2 days ago) [vdahiya12]
* 4b96bd7e - Update pcieutil error message on loading common pcie module (#2786) (6 days ago) [cytsao1]
* 77b725ca - Fix the show interface counters throwing exception on device with no external interfaces (#2851) (6 days ago) [abdosi]
