Why I did it
pkgs.k8s.io: Introducing Kubernetes Community-Owned Package Repositories | Kubernetes
For 1.22.2 k8s packages, source repo has been deprecated, going to store these packages in sonic build storage for installation to mitigate the issue. Will migrate to new repo when we are ready to upgrade k8s version.
Work item tracking
Microsoft ADO (number only): 27075924
How I did it
Store the 1.22.2 k8s package in sonic build storage and install the package there.
How to verify it
"apt list" to check if it's installed.
### Why I did it
When try to install k8s gpg file, there reports an error.
- "E: gnupg, gnupg2 and gnupg1 do not seem to be installed, but one of them is required for this operation curl: (23) Failed writing body".
To fix error we need to install gunpg package. But apt-key add is going to be deprecated, mv the gpg file to /etc/apt/trusted.gpg.d/ directly
### How I did it
Download k8s gpg file and put it in /etc/apt/trusted.gpg.d/
#### How to verify it
We can install k8s gpg file successfully, but no gnupg package installed inside sonic image.
### Why I did it
- Currently inside k8s master image we are going to use AAD to do authentication related stuff with python language, we need to pre-install several azure key-vault related python packages.
- Need to upgrade cri-dockerd to 0.3.10 to support bookworm
- Need to change netcat package name to netcat-openbsd for bookworm
- Remove the unnecessary apt-get update
##### Work item tracking
- Microsoft ADO **(number only)**: 26435886
#### How I did it
- pip3 install azure-keyvault-secrets
- apt-get -y install netcat-openbsd
- upgrade the cri-dockerd version for bookworm
#### How to verify it
- pip3 list to check if azure-keyvault-secrets is installed inside image
- dpkg -l to check if netcat-openbsd is installed inside image
- systemctl status cri-dockerd.service to check if it's running well
### Why I did it
ipmitool utility is used to access various HW sensors. Some platforms use "ipmitool raw " to read specific addresses.
ipmitool_1.8.19-4_amd64.deb, that is part of bookworm has a defect. The package is missing file enterprise.txt that is expected by the "raw read" code path.
It is so because the file the .deb tries to download at the build time does not have the necessary extension as it is available on remote server: https://www.iana.org/assignments/enterprise-numbers.txt
### How I did it
The defect had been fixed using coding changes in next unstable version of Linux. It is expected to be available in future stable version of the OS. Hence to keep the changes to minimal, the .dsc file is downloaded and only the Makefile is modified to download the correct file. To make is work as patch necessary changes are made.
#### How to verify it
Build log is attached and installation of the file is noted line #2274
When using vanilla bookworm on platforms like 5212 or 5224:
-------------------------------------------------------------------
root@sonic:~# ipmitool raw 0x04 0x2d 0x31
IANA PEN registry open failed: No such file or directory
00 c0 01 80
When fixed we should not see the above error:
--------------------------------------------------
root@sonic:/home/admin# ipmitool raw 0x04 0x2d 0x31
00 c0 00 80
### Description for the changelog
This change is to address ipmitool raw read issue. This patch must be removed once it is available in next stable Linux release that contains the fix.
1edb0e27e4
Improve SSHD config to use more secure settings
Why I did it
According to Sonic OS review result, SSHD config file /etc/ssh/sshd_config using insecure settings.
Work item tracking
Microsoft ADO: 15022083
How I did it
Change build_debian.sh script to set following settings to /etc/ssh/sshd_config:
ClientAliveInterval is set to 300
MaxAuthTries is set to default of 3
Banner set to /etc/issue
How to verify it
Pass all E2E test case.
This commit adds support for pensando asic called ELBA. ELBA is used in pci based cards and in smartswitches.
#### Why I did it
This commit introduces pensando platform which is based on ELBA ASIC.
##### Work item tracking
- Microsoft ADO **(number only)**:
#### How I did it
Created platform/pensando folder and created makefiles specific to pensando.
This mainly creates pensando docker (which OEM's need to download before building an image) which has all the userspace to initialize and use the DPU (ELBA ASIC).
Output of the build process creates two images which can be used from ONIE and goldfw.
Recommendation is use to use ONIE.
#### How to verify it
Load the SONiC image via ONIE or goldfw and make sure the interfaces are UP.
##### Description for the changelog
Add pensando platform support.
Why I did it
Add platform support for Debian 12 (Bookworm) on Mellanox Platform
How I did it
Update hw-management to v7.0030.2008
Deprecate the sfp_count == module_count approach in favour of asic init completion
Ref: Mellanox/hw-mgmt@bf4f593
Add xxd package to base image which is required by hw-management scripts
Add the non-upstream flag into linux kernel cache options
Update the thermalctl logic based on new sysfs attributes
Fix the integrate-mlnx-hw-mgmt script to not populate the arm64 Kconfig
How to verify it
Build kernel and run platform tests
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
Co-authored-by: Junchao-Mellanox <junchao@nvidia.com>
Co-authored-by: Junchao-Mellanox <57339448+Junchao-Mellanox@users.noreply.github.com>
pam-auth-update doesn't store local configuration, and it's meant to be
used by packages only. Because libpam-systemd was getting uninstalled
afterwards, this caused tacplus to get re-enabled.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Notable changes:
* Use j2cli from Debian repos instead of pip
* Use setuptools from Debian repos instead of pip
* Use wheel from Debian repos instead of pip
* Update grpcio and grpcio-tools python packages to match version in
Bookworm
* Use m2crypto from Debian repos instead of pip
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Reduce SONiC image filesystem size
Add a build option to reduce the image size.
The image reduction process is affecting the builds in 2 ways:
- change some packages that are installed in the rootfs
- apply a rootfs reduction script
The script itself will perform a few steps:
- remove file duplication by leveraging hardlinks
- under /usr/share/sonic since the symlinks under the device folder are lost during the build.
- under /var/lib/docker since the files there will only be mounted ro
- remove some extra files (man, docs, licenses, ...)
- some image specific space reduction (only for aboot images currently)
The script can later be improved but for now it's reducing the rootfs
size by ~30%.
* restore fully featured vim package
This adds optimization for the SONiC image build by splitting the final build step into two stages. It allows running the first stage in parallel, improving build time.
The optimization is enabled via new rules/config flag ENABLE_RFS_SPLIT_BUILD (disabled by default)
- Why I did it
To improve a build time.
- How I did it
Added a logic to run build_debian.sh in two stages, transferring the progress via a new build artifact.
- How to verify it
make ENABLE_RFS_SPLIT_BUILD=y SONIC_BUILD_JOBS=32 target/<IMAGE_NAME>.bin
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
Remove 15s unconditional sleep.
Instead check every second that /proc is not mounted.
Go to the next step if /proc is not mounted anymore or after 15s.
Fix tcpdump report error when tacacs enabled.
Why I did it
Fix tcpdump report error when tacacs enabled:
Sep 1 09:25:18.189395 vlab-01 ERR tcpdump: nss_tacplus: /etc/tacplus_nss.conf fopen failed
Sep 1 09:25:18.189606 vlab-01 ERR tcpdump: nss_tacplus: bad config or server line for nss_tacplus
This is because debian add a patch create AppArmor profile for resource access control. The profile need update to allow tcpdump access /etc/tacplus_nss.conf.
Work item tracking
Microsoft ADO: 17667308
How I did it
Modify tcpdump AppArmor profile, add new line to allow tcpdump access TACACS config file:
/etc/tacplus_nss.conf r,
### Why I did it
Need a tool to extend disk size
##### Work item tracking
- Microsoft ADO **(number only)**: 25094467
#### How I did it
Install parted package
#### How to verify it
Use apt list parted command to check if it's installed
Why I did it
Support FIPS DB configuration
Design Doc: sonic-net/SONiC#1372
Work item tracking
Microsoft ADO (number only): 24411148
How I did it
Add the FIPS Yang model to make FIPS configurable in ConfigDB.
How to verify it
See TestPlan: sonic-net/sonic-mgmt#9092
Build the image and run the tests: sonic-net/sonic-mgmt#9091
Why I did it
Currently, k8s master image is generated from a separate branch which we created by ourselves, not release ones. We need to commit these k8s master related code to master branch for a better way to do k8s master image build out.
Work item tracking
Microsoft ADO (number only):
19998138
How I did it
Install k8s dashboard docker images
Install geneva mds and mdsd and fluentd docker images and tag them as latest, tagging latest will help create container always with the latest version
Install azure-storage-blob and azure-identity, this will help do etcd backup and restore.
Install kubernetes python client packages, this will help read worker and container state, we can send these metric to Geneva.
Remove mdm debian package, will replace it with the mdm docker image
Add k8s master entrance script, this script will be called by rc-local service when system startup. we have some master systemd services in compute-move repo, when VMM service create master VM, VMM will copy all master service files inside VM, the entrance script will setup all services according to the service files.
When the entrance script content changed, the PR build will set include_kubernetes_master=y to help do validation for k8s master related code change. The default value of include_kubernetes_master should be always n for public master branch. We will generate master image from internal master branch
How to verify it
Build with INCLUDE_KUBERNETES_MASTER = y
Why I did it
Fix the armhf build failure.
How to reproduce the issue:
docker run -it debain:bullseye bash
apt-get update && apt-get install -y python3-pip
pip3 install PyYAML==5.4.1
Error message:
Collecting PyYAML==5.4.1
Installing build dependencies ... done
Getting requirements to build wheel ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 /tmp/tmp6xabslgb_in_process.py get_requires_for_build_wheel /tmp/tmp_er01ztl
....
raise AttributeError(attr)
AttributeError: cython_sources
----------------------------------------
WARNING: Discarding d63f2d7597/PyYAML-5.4.1.tar.gz (sha256)=607774cbba28732bfa802b54baa7484215f530991055bb562efbed5b2f20a45e (from https://pypi.org/simple/pyyaml/) (requires-python:>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*, !=3.5.*). Command errored out with exit status 1: /usr/bin/python3 /tmp/tmp6xabslgb_in_process.py get_requires_for_build_wheel /tmp/tmp_er01ztl Check the logs for full command output.
ERROR: Could not find a version that satisfies the requirement PyYAML==5.4.1
ERROR: No matching distribution found for PyYAML==5.4.1
root@fa2fa92edcfd:/#
But if adding the option --no-build-isolation, then it is good, see fix.
install "PyYAML==5.4.1" --no-build-isolation
The same error can be found in the multiple builds.
Work item tracking
Microsoft ADO (number only): 24567457
How I did it
Add a build option --no-build-isolation.
#### Why I did it
Reduced root directory privileges
#### How I did it
During build_debian - called chroot to reduce root directory and its subdirectories privileges to 744
#### How to verify it
After image build and upgrade - check /root privileges by calling "ls -a /root"
#### Description for the changelog
reduced /root directory privileges
#### Why I did it
Support reset factory in Sonic OS
[Reset Factory HLD](https://github.com/sonic-net/SONiC/pull/1231)
[Sonic-mgmt tests](https://github.com/sonic-net/sonic-mgmt/pull/7652)
#### How I did it
- Added new script "/usr/bin/reset-factory"
* It generates a new config_db.json files with factory configurations
* It clears system files and logs
* It removes all docker containers on system except database
* It clears non-default users and restores default users password
- Dump the default users info to a new file during build "/etc/sonic/default_users.json"
- Supported new type "Keep-basic" in "config-setup factory"
- Add new conf file for config-setup "/etc/config-setup/config-setup.conf
#### How to verify it
- Run reset-factory script with all types: < none | keep-all-config | only-config | keep-basic >
- Run config-setup factory with parameters < none | keep-basic >
#### Description for the changelog
Support reset factory in Sonic OS
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
- Why I did it
Add support for static DNS configuration. According to sonic-net/SONiC#1262 HLD.
- How I did it
Add a new resolv-config.service that is responsible for transferring configuration from Config DB into /etc/resolv.conf file that is consumed by various subsystems in Linux to resolve domain names into IP addresses.
- How to verify it
Run the image compilation. Each component related to the static DNS feature is covered with the unit tests.
Run sonic-mgmt tests. Static DNS feature will be covered with the system tests.
Install the image and run manual tests.
- Why I did it
Since the prod signing tool is vendor specific, and each vendor may have different arguments they would like to use in the script, we would need a way to inject those arguments to the script.
- How I did it
Add a compilation flag SECURE_UPGRADE_PROD_TOOL_ARGS which vendors can use to inject any flag they would want to the prod signing script.
- How to verify it
Build SONiC using your own prod script
- Why I did it
Fix issue with signing tool not running due to being call with the path from the host and not the path it is mounted on inside the docker-slave
- How I did it
Modified the path on the SECURE_UPGRADE_PROD_SIGNING_TOOL flag to the path where it is mounted inside the slave docker
- How to verify it
Build SONiC using your own prod script
Depends on https://github.com/sonic-net/sonic-linux-kernel/pull/315
#### Why I did it
The name SECURE_UPGRADE_DEV_SIGNING_CERT is misleading, this flag is relevant to both to dev and prod signing.
#### How I did it
Rename all mentions of name SECURE_UPGRADE_DEV_SIGNING_CERT to SECURE_UPGRADE_SIGNING_CERT - this is also done with PR in sonic-linux-kernel repository
#### How to verify it
Build SONiC using your own prod script
Why I did it
Import defusedxml packet to fix semgrep error "using defusedxml instead of xml"
How I did it
Add "pip3 install defusedxml" in build_debian.sh
Signed-off-by: pettershao-ragilenetworks <pettershao@ragilenetworks.com>
Why I did it
Support to add SONiC OS Version in device info.
It will be used to display the version info in the SONiC command "show version". The version is used to do the FIPS certification. We do not do the FIPS certification on a specific release, but on the SONiC OS Version.
SONiC Software Version: SONiC.master-13812.218661-7d94c0c28
SONiC OS Version: 11
Distribution: Debian 11.6
Kernel: 5.10.0-18-2-amd64
How I did it
Why I did it
Find a new bug on kubelet side. The kubernetes-cni plug-in was removed in #12997, the reason is that the plug-in will be auto installed when install kubeadm, and will report error if we don't remove the install code. But after removal, the version auto installed is different from what we installed before. This will affect the kubelet action in some scenarios we don't find before. Need to install it by another way.
How I did it
Install kubernetes-cni==0.8.7-00 before install kubeadm
How to verify it
Flannel binary will be installed under /opt/cni/bin/ folder
- Why I did it
Add Secure Boot support to SONiC OS.
Secure Boot (SB) is a verification mechanism for ensuring that code launched by a computer's UEFI firmware is trusted. It is designed to protect a system against malicious code being loaded and executed early in the boot process before the operating system has been loaded.
- How I did it
Added a signing process to sign the following components:
shim, grub, Linux kernel, and kernel modules when doing the build, and when feature is enabled in build time according to the HLD explanations (the feature is disabled by default).
- How to verify it
There are self-verifications of each boot component when building the image, in addition, there is an existing end-to-end test in sonic-mgmt repo that checks that the boot succeeds when loading a secure system (details below).
How to build a sonic image with secure boot feature: (more description in HLD)
Required to use the following build flags from rules/config:
SECURE_UPGRADE_MODE="dev"
SECURE_UPGRADE_DEV_SIGNING_KEY="/path/to/private/key.pem"
SECURE_UPGRADE_DEV_SIGNING_CERT="/path/to/cert/key.pem"
After setting those flags should build the sonic-buildimage.
Before installing the image, should prepared the setup (switch device) with the follow:
check that the device support UEFI
stored pub keys in UEFI DB
enabled Secure Boot flag in UEFI
How to run a test that verify the Secure Boot flow:
The existing test "test_upgrade_path" under "sonic-mgmt/tests/upgrade_path/test_upgrade_path", is enough to validate proper boot
You need to specify the following arguments:
Base_image_list your_secure_image
Taget_image_list your_second_secure_image
Upgrade_type cold
And run the test, basically the test will install the base image given in the parameter and then upgrade to target image by doing cold reboot and validates all the services are up and working correctly
#### Why I did it
Add support of California-SB237 conformance.
https://github.com/sonic-net/SONiC/tree/master/doc/California-SB237
#### How I did it
Expire user passwords during build
#### How to verify it
Enable build flag and check if default user is prompted for a new password
The lsof and sysstat packages make determining what files/sockets a
program has open a bit easier. This helps if, for example, some
application has a file open that's been deleted from disk.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
fixes#12907
When the management interface IP address configuration changes from dynamic to static the DNS configuration (retrieved from the DHCP server) in /etc/resolv.conf remains uncleared. This leads to a DNS configuration pointing to the wrong nameserver. To make the behavior clear DNS configuration received from DHCP should be cleared.
- How I did it
Use resolvconf package for managing DNS configuration. It is capable of tracking the source of DNS configuration and puts the configuration retrieved from the DHCP servers into a separate file. This allows the implementation of DNS configuration cleanup retrieved from DHCP during networking reconfiguration.
- How to verify it
Ensure that the management interface has no static configuration.
Check that /etc/resolv.conf has DNS configuration.
Configure a static IP address on the management interface.
Verify that /etc/resolv.conf has no DNS configuration.
Remove the static IP address from the management interface.
Verify that /etc/resolv.conf has DNS configuration retrieved form DHCP server.
Why I did it
We plan to pilot k8s feature, need to fix several bugs including enable telemetry feature and add platform label.
How I did it
Add support feature set, only enable telemetry container upgrade for now
Add platform label for scheduler usage
Remove CNI installation code, it would be auto installed when install kubeadm
How to verify it
After sonic device join k8s cluster, show node labels to check if platform label is visible.
Signed-off-by: Yun Li yunli1@microsoft.com
Why I did it
In some cases, dpkg will call dpkg to validate version.
dpkg hook will get stuck in a loop to lock.
How I did it
Use an env variable to skip duplicated lock.
Why I did it
It's possible to speed up some parts of a build using parallel compression/decompression.
This is especially important for build_debian.sh.
How I did it
pigz is a parallel implementation of gzip: https://zlib.net/pigz/
Some programs like docker and mkinitramfs can automatically detect and use it instead of gzip.
For tar we need to select it directly.
To enable this feature you need to set GZ_COMPRESS_PROGRAM=pigz
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
Why I did it
How I did it
How to verify it
* 03.Version-cache - framework environment settings
It defines and passes the necessary version cache environment variables
to the caching framework.
It adds the utils script for shared cache file access.
It also adds the post-cleanup logic for cleaning the unwanted files from
the docker/image after the version cache creation.
* 04.Version cache - debug framework
Added DBGOPT Make variable to enable the cache framework
scripts in trace mode. This option takes the part name of the script to
enable the particular shell script in trace mode.
Multiple shell script names can also be given.
Eg: make DBGOPT="image|docker"
Added verbose mode to dump the version merge details during
build/dry-run mode.
Eg: scripts/versions_manager.py freeze -v \
'dryrun|cmod=docker-swss|cfile=versions-deb|cname=all|stage=sub|stage=add'
* 05.Version cache - docker dpkg caching support
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
Why I did it
There were some changes in apt source code in version 2.1.9.
As a result apt used in bullseye (2.2.4) is intolerant to network issues.
This was fixed in 10631550f1 Already fixed version is used in bookworm (2.5.4)
And not yet affected version is used in buster (1.8.2.3)
How I did it
Set Acquire::Retries to 3 for sonic-slave-bullseye, docker-base-bullseye and final Debian image.
Ref: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1876035
Signed-off-by: Konstantin Vasin k.vasin@yadro.com
Revert SSHD config change.
#### Why I did it
Some test case and code may impact by SSHD config change.
#### How I did it
Revert following change in build_debian.sh script:
ClientAliveInterval change back to 900.
MaxAuthTries change back to default value.
Banner change to disabled.
#### How to verify it
Pass all E2E test case.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Revert SSHD config change.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
nameserver and domain entries from build system fsroot gets into sonic image.
How I did it
Clear /etc/resolv.conf before building image
How to verify it
Built image with it and verified with install that /etc/resolv.conf is empty
Why I did it
Unify the Debian mirror sources
Make easy to upgrade to the next Debian release, not source url code change required.
Support to customize the Debian mirror sources during the build
Relative issue: #12523
