### Why I did it
We're not adding any patch on top of hiredis, and there's no apparent reason to build this. Remove the build step here, and just install the package from the Debian repos.
##### Work item tracking
- Microsoft ADO **(number only)**: 24381590
#### How to verify it
Build the SONiC image, and load it. Verify that services come up.
Why I did it
Fix the armhf build failure.
How to reproduce the issue:
docker run -it debain:bullseye bash
apt-get update && apt-get install -y python3-pip
pip3 install PyYAML==5.4.1
Error message:
Collecting PyYAML==5.4.1
Installing build dependencies ... done
Getting requirements to build wheel ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 /tmp/tmp6xabslgb_in_process.py get_requires_for_build_wheel /tmp/tmp_er01ztl
....
raise AttributeError(attr)
AttributeError: cython_sources
----------------------------------------
WARNING: Discarding d63f2d7597/PyYAML-5.4.1.tar.gz (sha256)=607774cbba28732bfa802b54baa7484215f530991055bb562efbed5b2f20a45e (from https://pypi.org/simple/pyyaml/) (requires-python:>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*, !=3.5.*). Command errored out with exit status 1: /usr/bin/python3 /tmp/tmp6xabslgb_in_process.py get_requires_for_build_wheel /tmp/tmp_er01ztl Check the logs for full command output.
ERROR: Could not find a version that satisfies the requirement PyYAML==5.4.1
ERROR: No matching distribution found for PyYAML==5.4.1
root@fa2fa92edcfd:/#
But if adding the option --no-build-isolation, then it is good, see fix.
install "PyYAML==5.4.1" --no-build-isolation
The same error can be found in the multiple builds.
Work item tracking
Microsoft ADO (number only): 24567457
How I did it
Add a build option --no-build-isolation.
- run pre-commit tox profile to trim all trailing blanks
- use several commits with a per-folder based strategy
to ease their merge
Issue #15114
Signed-off-by: Guillaume Lambert <guillaume.lambert@orange.com>
Update golang version for telemetry build in sonic-slave-buster to fix https://security-tracker.debian.org/tracker/CVE-2021-33195, this PR will be merged into 202012 branch finally.
#### Why I did it
Go before 1.15.13 and 1.16.x before 1.16.5 has functions for DNS lookups that do not validate replies from DNS servers, and thus a return value may contain an unsafe injection (e.g., XSS) that does not conform to the RFC1035 format. Now in 201911 and 202012 branch we're using 1.14.2
##### Work item tracking
- Microsoft ADO **(number only)**:17727291
#### How I did it
Bump golang version into 1.15.15 which contains corresponding fix.
#### How to verify it
unit test to do sanity check.
#### Why I did it
Fixes#9216
#### How I did it
Add support for python2 redis to the sonic-slave-stretch and sonic-slave-buster Dockerfiles
#### How to verify it
Run build steps documented in Issue #9216
Why I did it
Fix some of vulnerability issue relative python packages #14269
Pillow: [CVE-2021-27921]
Wheel: [CVE-2022-40898]
lxml: [CVE-2022-2309]
How I did it
Why I did it
It's possible to speed up some parts of a build using parallel compression/decompression.
This is especially important for build_debian.sh.
How I did it
pigz is a parallel implementation of gzip: https://zlib.net/pigz/
Some programs like docker and mkinitramfs can automatically detect and use it instead of gzip.
For tar we need to select it directly.
To enable this feature you need to set GZ_COMPRESS_PROGRAM=pigz
During docker build, host files can be passed to the docker build through
docker context files. But there is no straightforward way to transfer
the files from docker build to host.
This feature provides a tricky way to pass the cache contents from docker
build to host. It tar's the cached content and encodes them as base64 format
and passes it through a log file with a special tag as 'VCSTART and VCENT'.
Slave.mk in the host, it extracts the cache contents from the log and stores them
in the cache folder. Cache contents are encoded as base64 format for
easy passing.
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
#### How I did it
#### How to verify it
Why I did it
Unify the Debian mirror sources
Make easy to upgrade to the next Debian release, not source url code change required.
Support to customize the Debian mirror sources during the build
Relative issue: #12523
Why I did it
Building docker-sonic-vs requires dependencies installed in sonic-slave-buster
How I did it
Add libs to sonic-slave-buster and sonic-slave-bullseye
How to verify it
Check files
* Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation
Current armhf Sonic build on amd64 host uses qemu emulation. Due to the
nature of the emulation it takes a very long time, about 22-24 hours to
complete the build. The change I did to reduce the building time by
porting Sonic armhf build on amd64 host for Marvell platform for debian
buster to use cross-compilation on arm64 host for armhf target. The
overall Sonic armhf building time using cross-compilation reduced to
about 6 hours.
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed final Sonic image build with dockers inside
* Update Dockerfile.j2
Fixed qemu-user-static:x86_64-aarch64-5.0.0-2 .
* Update cross-build-arm-python-reqirements.sh
Added support for both armhf and arm64 cross-build platform using $PY_PLAT environment variable.
* Update Makefile
Added TARGET=<cross-target> for armhf/arm64 cross-compilation.
* Reviewer's @qiluo-msft requests done
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Added new radius/pam patch for arm64 support
* Update slave.mk
Added missing back tick.
* Added libgtest-dev: libgmock-dev: to the buster Dockerfile.j2. Fixed arm perl version to be generic
* Added missing armhf/arm64 entries in /etc/apt/sources.list
* fix libc-bin core dump issue from xumia:fix-libc-bin-install-issue commit
* Removed unnecessary 'apt-get update' from sonic-slave-buster/Dockerfile.j2
* Fixed saiarcot895 reviewer's requests
* Fixed README and replaced 'sed/awk' with patches
* Fixed ntp build to use openssl
* Unuse sonic-slave-buster/cross-build-arm-python-reqirements.sh script (put all prebuilt python packages cross-compilation/install inside Dockerfile.j2). Fixed src/snmpd/Makefile to use -j1 in all cases
* Clean armhf cross-compilation build fixes
* Ported cross-compilation armhf build to bullseye
* Additional change for bullseye
* Set CROSS_BUILD_ENVIRON default value n
* Removed python2 references
* Fixes after merge with the upstream
* Deleted unused sonic-slave-buster/cross-build-arm-python-reqirements.sh file
* Fixed 2 @saiarcot895 requests
* Fixed @saiarcot895 reviewer's requests
* Removed use of prebuilt python wheels
* Incorporated saiarcot895 CC/CXX and other simplification/generalization changes
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed saiarcot895 reviewer's additional requests
* src/libyang/patch/debian-packaging-files.patch
* Removed --no-deps option when installing wheels. Removed unnecessary lazy_object_proxy arm python3 package instalation
Co-authored-by: marvell <marvell@cpss-build3.marvell.com>
Co-authored-by: marvell <marvell@cpss-build2.marvell.com>
Why I did it
Upgrade FRR to version 8.2.2. Build libyang2 required by FRR.
How I did it
Update FRR version and tag.
How to verify it
Following tests were performed on sonic-vs:
BGP docker status check
BGP configuration and session establishment
Route redistribution and ping
Issued show commands to check the bgp neighbor and routes
Checked app-db to ensure bgp routes are installed with correct interface and nexthop.
Create VRF and check FRR knows the VRF
Check VRF routes are installed in app-db with correct Vrf name and next-hop
Establish BGP Evpn session and check if Evpn routes (multicast, mac, prefix) are exchanged and installed correctly in app-db.
Why I did it
To sign SONiC kernel image and allow secure boot based system to verify SONiC image before loading into the system.
How I did it
Pass following parameter to rules/config.user
Ex:
SONIC_ENABLE_SECUREBOOT_SIGNATURE := y
SIGNING_KEY := /path/to/key/private.key
SIGNING_CERT := /path/to/public/public.cert
How to verify it
Secure boot enabled system enrolled with right public key of the, image in the platform UEFI database will able to verify image before load.
Alternatively one can verify with offline sbsign tool as below.
export SBSIGN_KEY=/abc/bcd/xyz/
sbverify --cert $SBSIGN_KEY/public_cert.cert fsroot-platform-XYZ/boot/vmlinuz-5.10.0-8-2-amd64 mage
O/P:
Signature verification OK
Why I did it
Add libgmock-dev to the package list required by linkmgrd unittests.
Required by PR: Azure/sonic-linkmgrd#45
How I did it
Add the package to the package list.
How to verify it
Build docker-mux with KEEP_SLAVE_ON=yes and verify libgmock-dev is present.
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Why I did it
Smartmontools 6.6 has an issue with reading SMART info of nvme SSD
Smartmontools can be installed with apt-get, no need to build and install
How I did it
Use apt-get to install smartmontools 7.2-1
Remove previous make files for smartmontools 6.6
How to verify it
verify with "smartctl" can read out correct SMART info on NVME ssd.
verify "show platform ssdhealth" can still work
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Support saiserver v2 with python3 and thrift 0.13.0
add variables to support the saiserverv2
build different thrift in saithrift depends on saiserver version
build differernt versions of saiserver
make the saiserver and saiserver docker with version number
test done:
build two different versions of sasiserver in local build environment
add saiserver to buster
Co-authored-by: richard.yu <richard.yu@microsoft.comwq>
- Add INCLUDE_PINS to config to enable/disable container
- Add Docker files and supporting resources
- Add sonic-pins submodule and associated make files
Submission containing materials of a third party:
Copyright Google LLC; Licensed under Apache 2.0
#### Why I did it
Adds P4RT container to SONiC for PINS
The P4RT app is covered by this HLD:
https://github.com/pins/SONiC/blob/master/doc/pins/p4rt_app_hld.md
#### How I did it
Followed the pattern and templates used for other SONiC applications
#### How to verify it
Build SONiC with INCLUDE_P4RT set to "y".
Verify that the resulting build has a container called "p4rt" running.
You can verify that the service is up by running the following command on the SONiC switch:
```bash
sudo netstat -lpnt | grep p4rt
```
You should see the service listening on TCP port 9559.
#### Which release branch to backport (provide reason below if selected)
None
#### Description for the changelog
Build P4RT container for PINS
This pull request integrate audisp-tacplus to SONiC for per-command accounting.
#### Why I did it
To support TACACS per-command accounting, we integrate audisp-tacplus project to sonic.
#### How I did it
1. Add auditd service to SONiC
2. Port and patch audisp-tacplus to SONiC
#### How to verify it
UT with CUnit to cover all new code in usersecret-filter.c
Also pass all current UT.
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add audisp-tacplus for per-command accounting.
#### A picture of a cute animal (not mandatory but encouraged)
* Add macsec-xpn-support iproute2 in syncd
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Polish code
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Remove useless files
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Add self-compiled iproute2 to docker sonic vs
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Enhance apt install for iproute2 dependencies
Signed-off-by: Ze Gan <ganze718@gmail.com>
The recent release of redis 4.0.0 or newer (for python3) breaks sonic-config-engine unit test. Fix to last known good version.
ref: https://pypi.org/project/redis/#history
* Make neccesary changed to mellanox platform code to build on Debian 11
* Revert use of backported kernel to build mft and elect to only build kernel module under bullseye
Allow mellanox platform to build and successfully switch packets in
Debian 11
Upgraded
* Mellanox SDK
* Mellanox Hardware Management
* Mellanox Firmware
* Mellanox Kernel Patches
Adjusted build system to support host system running bullseye and
dockers running buster.
This pull request add plugin support library to bash.
And we will create a TACACS+ plugin for bash in an other PR, which will bring per command authorization feature to bash.
Why I did it
To support TACACS per command authorization, we check user command before execute it.
How I did it
Add plugin support to bash.
How to verify it
UT with CUnit under bash project cover all new code in plugin.c.
Also pass all current UT.
Which release branch to backport (provide reason below if selected)
N/A
Description for the changelog
Add plugin support to bash.
#### Why I did it
Usecase:
export DOCKER_EXTRA_OPTS="--registry-mirror=https://some.host" - to avoid DockerHub pull rate limiting.
#### How I did it
Added DOCKER_EXTRA_OPTS
#### How to verify it
export DOCKER_EXTRA_OPTS="--registry-mirror=https://some.host"
make target/sonic-mellanox.bin
- Why I did it
migrate to python3 support
add dependent packages for Klish
allow login as non-root user
- How I did it
update sonic-cli script to start Klish with user name, system name and timeout
update the Dockerfile.j2 to resolve dependent packages
add python3-dev for Klish use
- How to verify it
Incremental buster build with Azure/sonic-mgmt-framework#76 and verify the sonic-cli
- Description for the changelog
Migrate to python3.7 support, update sonic-cli script and resolve package dependencies
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
This PR is part of SONiC Application Extension
Depends on #5938
- Why I did it
To provide an infrastructure change in order to support SONiC Application Extension feature.
- How I did it
Label every installable SONiC Docker with a minimal required manifest and auto-generate packages.json file based on
installed SONiC images.
- How to verify it
Build an image, execute the following command:
admin@sonic:~$ docker inspect docker-snmp:1.0.0 | jq '.[0].Config.Labels["com.azure.sonic.manifest"]' -r | jq
Cat /var/lib/sonic-package-manager/packages.json file to verify all dockers are listed there.
- Support compile sonic arm image on arm server. If arm image compiling is executed on arm server instead of using qemu mode on x86 server, compile time can be saved significantly.
- Add kernel argument systemd.unified_cgroup_hierarchy=0 for upgrade systemd to version 247, according to #7228
- rename multiarch docker to sonic-slave-${distro}-march-${arch}
Co-authored-by: Xianghong Gu <xgu@centecnetworks.com>
Co-authored-by: Shi Lei <shil@centecnetworks.com>
- Why I did it
To move ‘sonic-host-service’ which is currently built as a separate package to ‘sonic-host-services' package.
- How I did it
- Moved 'sonic-host-server' to 'src/sonic-host-services' and included it as part of the python3 wheel.
- Other files were moved to 'src/sonic-host-services-data' and included as part of the deb package.
- Changed build option ‘INCLUDE_HOST_SERVICE’ to ‘ENABLE_HOST_SERVICE_ON_START’ for enabling sonic-hostservice at boot-up by default.
When building the sonic-slave-buster docker container, the node.js package is
installed to meet the requirements of the Azure DevOPs pipleline
build. Recently this install of node.js has been failing.
This commit fixes that build break by upgrading the
sonic-slave-buster build to install version 14.x of node.js which is the
current LTS version for buster.
**- Why I did it**
Prior to SONiC using Debian Buster, we needed to build Python 3.5 or newer from source for installation in the SNMP container, becuase it wasn't available from the Debian repository for Jessie or Stretch. Now that all containers are based on Buster, we simply install Python 3.7 from the Debian repository in the host as well as all containers. We are no longer building Python 3 from source, so the Makefile is unused and we no longer need to install build dependencies in the slave containers.
**- How I did it**
- Remove Python 3 makefile
- No longer install Python 3 build dependencies in the slave containers.
Fixed swi-tools code to work with `python3`
Updated the version of swi-tools downloaded by the `sonic-slave-buster/Dockerfile.j2`
Other Dockerfiles still use the `python2` version, though swi-tools is not used within the stretch builder.
The HLD about MACsec feature is at :
https://github.com/Azure/SONiC/blob/master/doc/macsec/MACsec_hld.md
- How to verify it
This PR doesn't set MACsec container automatically start, You should manually start the container by docker run docker-macsec
wpa_supplicant binary can be found at MACsec container.
This PR depends on the PR, WPA_SUPPLICANT, and The MACsec container will be set as automatically start by later PR.
Signed-off-by: zegan <zegan@microsoft.com>