Why I did it
1. fix chassis test_set_fans_led case
2. fix chassis get_name case mismatch issue
3. fix fan_drawer test_set_fans_speed
4. fix component test_components test case
How I did it
Add corresponding configuration into chassis json file
How to verify it
Run platform tests cases to verify these failure cases
#### Why I did it
Include below commits:
```
7147354 2023-02-14 | Fix: zero route may have empty nexthop (#276) [Qi Luo]
e60a64c 2022-11-30 | Use github code scanning instead of LGTM (#274) [Liu Shilong]
```
#### Why I did it
1.57.x SDK based incremental drop that addresses:
Fix for MIGSMSFT-158
Support for VxLAN and BFD Serviceability CLI
sfputil reset platform fix to handle 100G optics
Added thermal management feature for ZR optics sensors
#### How I did it
Update cisco-8000 submodule to v0.2.5
Include following commits:
- c98b9f09 [202012][orchagent]: Get bridge port ID from FDBOrch cache instead of SAI API #2657 (#2658)
- 59886b8f [MuxOrch] Enabling neighbor when adding in active state (#2601)
```
39cdb49c7 [202012][show] Add bgpraw to show run all (#2639)
b3ebba2ca [202012][show] add new CLI to show tunnel route objects #2255 (#2659)
d08f59b9f Fixed a bug in "show vnet routes all" causing screen overrun. (#2644) (#2654)
a996abdb5 [202012][show] show logging CLI support for logs stored in tmpfs (#2652)
c60f771c0 [202012][show_bfd] add local discriminator in show bfd command (#2616)
```
#### Why I did it
Cherry pick from #10083
It is to fix the issue #10048
When building .raw image, for instance, target/sonic-broadcom.raw, it will generate a .bin image, target/sonic-broadcom.bin, as the intermediate file. The intermediate file is a build target which may contains different dependencies with the raw one.
#### How I did it
Rename the intermediate file.
#### Why I did it
Some tests under platform_tests/api were failing on the 7050CX3 due to outdated facts in platform.json
#### How I did it
Updated platform.json facts with appropriate values
#### How to verify it
Run tests under platform_tests/api to verify no failures
Why I did it
fix DX010 fan drawer and watchdog platform test case issues
How I did it
1. Add fan_drawer get_maximum_consumed_power support
2. Adjust maximum watchdog timeout value check
How to verify it
Run test_fan_drawer and test_watchdog test cases.
9551386 Jing Zhang Mon Jan 23 15:49:52 2023 -0800 [202012] Update link prober stats post logic #159 (#162)
e54f289 Liu Shilong Wed Nov 30 18:04:15 2022 +0800 Use github code scanning instead of LGTM (#157)
This is to reduce writes to disk, which then can use the SSD to get worn
out faster.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
(cherry picked from commit ee1c32a802)
Why I did it
Advance sonic-dhcp-relay submodule head on 202012 branch
How I did it
Added the following commits:
a4b15d8 jcaiMR Thu Dec 29 14:18:28 2022 +0800 fix relay-reply dhcpv6 packet counter issue (#29)
677543f jcaiMR Sat Dec 17 00:24:32 2022 +0800 fix handleSwssNotification crash in dhcp6relay (#28)
ed86546 jcaiMR Wed Dec 14 14:08:58 2022 +0800 Fix multiple vlan issue (#27)
5ec1f5b Vivek Thu Dec 8 09:44:15 2022 -0800 Made the Error log informative (#22)
063d41b jcaiMR Wed Nov 30 14:41:53 2022 +0800 disable cfg dynamic change (#25)
d4a51f6 kellyyeh Tue Jan 31 18:09:08 2023 -0800 Add unittest infrastructure (#5) (#31)
How to verify it
Ran full dhcpv6 test suite on lab device
Why I did it
When getting system mac of centec platform, it would increase by 1 the last byte of mac, but it could not consider the case of carry.
How I did it
Firstly, I would replace the ":" with "" of mac to a string.
And then, I would convert the mac from string to int and increase by 1, at last convert it to string with inserting ":".
- Why I did it
Added BIOS upgrade infra
- How I did it
Added new make target
- How to verify it
Copy msn3800_bios.tar.gz to platform/mellanox/bios
make configure PLATFORM=mellanox
make target/files/buster/msn3800_bios.tar.gz
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
Fix issue caused by dualtor support PR [dhcpmon] Open different socket for dual tor to enable interface filtering #11201
Improve code
How I did it
On single ToR, packets received count was duplicated due to socket filter set to "inbound"
Tx count not increasing due to filter set to "inbound". Added an outbound socket to count tx packets
Added vlan member interface mapping for Ethernet interface to vlan interface lookup in reference to PR Fix multiple vlan issue sonic-dhcp-relay#27
Exit when socket fails to initialize to allow dhcp_relay docker to restart
How to verify it
Tested on vstestbed single tor and dual tor, sent packets and verify printed out dhcpmon rx and tx counters is correct
Correct number of tx increases
Tx does not increase when ToR is on standby
#### Why I did it
Update submodule for sonic-swss:
e739e6c - 2023-01-27 : custom advertised prefix for primary vxlan tunnel [202012] (#2641) [siqbal1986]
sonic-restapi:
99c467d - 2023-01-24 : Add API support for adv prefix and custom monitoring (#133) [Prince Sunny]
347684a - 2022-11-30 : Use github code scanning instead of LGTM (#132) [Liu Shilong]
…(#12912)
Why I did it
As described in detail in #12753, the current FRR patch 0009-ignore-route-from-default-table.patch is causing unwanted FRR/zebra error logs. This change gets rid of the error messages for routes from kernel default table while these routes are ignored in prefix encoding.
How I did it
This fix updates the original 0009 patch by checking if the routes are from table default before printing the error logs. The original patch checks the same condition and ignores the routes from table default in prefix encoding.
How to verify it
Follow the steps to repro as described in #12753.
Also verify the test case ipfwd/test_nhop_count.py no longer fails due to the error messages.
#### Why I did it
Resolve cherry-pick conflict for https://github.com/sonic-net/sonic-buildimage/pull/12912
Why I did it
Fix the following issues for Seastone platform:
- system-health issue: show system-health detail will not complete #9530, Celestica Seastone DX010-C32: show system-health detail fails with 'Chassis' object has no attribute 'initizalize_system_led' #11322
- show platform firmware updates issue: Celestica Seastone DX010-C32: show platform firmware updates #11317
- other platform optimization
How I did it
Modify and optimize the platform implememtation.
How to verify it
Manual run the test commands described in these issues.
1.57.x SDK based incremental drop that addresses:
1) orchagent crash
2) Port LED issue
3) Tunnel endpoint stats
4) test_warm_reboot issue
5) nhop test failure
6) "show platform versions' CLI
- Why I did it
Backport #9795
Python select.select accept a optional timeout value in seconds, however, the value passes to it is a value in millisecond.
- How I did it
Transfer the value to millisecond.
- How to verify it
Manual test
#### Why I did it
Backport https://github.com/sonic-net/sonic-buildimage/pull/13246 to 202012 branch.
In case of warm/fast reboot, the hardware reboot cause will NOT be cleared because CPLD will not be touched in this flow. To not confuse the reboot cause determine logic, the leftover hardware reboot cause shall be skipped by the platform API, platform API will return the 'REBOOT_CAUSE_NON_HARDWARE' instead of the "hardware" reboot cause.
#### How I did it
Check the proc cmdline to see whether the last reboot is a warm or fast reboot, if yes skip checking the leftover hardware reboot cause.
#### How to verify it
a. Manual test:
> 1. Perform a power loss
> 2. Perform a warm/fast reboot
> 3. check the reboot cause should be "warm-reboot" or "fast-reboot" instead of "power loss"
b. Run reboot cause related regression test.
Partial cherry-pick of: [Mellanox] Modified Platform API to support all firmware updates in single boot #9608
- Why I did it
To allow user manual reboot control over ONiE FW upgrade
- How I did it
Added a dedicated script argument handling
- How to verify it
mlnx-onie-fw-update.sh update --no-reboot
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
The main issue is the pip/pip3 command cannot be found when the package is being installed by apt-get.
When using the dpkg install, the searching path is PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
When using the apt-get install, the searching path is PATH=/usr/sbin:/usr/bin:/sbin:/bin
But the pip/pip3 default path is at /usr/local/bin, so dpkg works, but apt-get not work.
How I did it
Export the path /usr/local/bin for pip/pip3.
Make the deb packages can be installed by apt-get.
Why I did it
To keep 'Request for xxx branch' label when finished auto-cherry-pick.
How I did it
Change logic in post cherry pick action.
How to verify it
Why I did it
smartctl tool is available only in PMON docker. Hence, the tool may be not accessible incase PMON docker goes down.
Using iSMART_64 tool to fetch the SSD firmware version and device model information.
How I did it
Replacing smartctl with iSMART_64.
Why I did it
sonic_host_services depends on deepdiff.
But latest deepdiff version has error.
How I did it
pin deepdiff to previous version.
How to verify it
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
ECN parameters need to be updated for storage backend
How I did it
Included the check for storage backend devices to update qos configs
How to verify it
Verified that the new ecn settings are applied on storage backend device.
Verified that the old ecn settings are applied for storage frontend, non storage frontend/backend devices
The display of azure pipeline is not specific now, such as when the step Run test fails, the display of itself shows successful, but the display of step Kvmdump shows fails, but actually, the step Kvmdump doesn't fail. I improve the display of azure pipeline in this pr, each step has its own success or failure, and is shown in azure pipeline.
Why I did it
The display of azure pipeline is not specific now, such as when the step Run test fails, the display of itself shows successful, but the display of step Kvmdump shows fails, but actually, the step Kvmdump doesn't fail. I improve the display of azure pipeline in this pr, each step has its own success or failure, and is shown in azure pipeline.
How I did it
Each step has its own signature of success or failure.
Using the chain of responsibility pattern to manage all status.
Modify the expected-state in each step.
Why I did it
Currently sonic-slave-* tag is confusing. Set correct tag on sonic-slave-* image.
Fix job name to fit the build.
How I did it
build amd image in amd64:
sonic-slave-bullseye:cfe29bff67c
sonic-slave-bullseye:latest
sonic-slave-bullseye:master
build armhf image in amd64:
sonic-slave-bullseye-march-armhf:33614806dc3
sonic-slave-bullseye-march-armhf:latest
sonic-slave-bullseye-march-armhf:master
build arm64 image in amd64:
sonic-slave-bullseye-march-arm64:f3b1b16c801
sonic-slave-bullseye-march-arm64:latest
sonic-slave-bullseye-march-arm64:master
build arm64 image in arm64:
sonic-slave-bullseye:75cb326c9a7
sonic-slave-bullseye-arm64:latest
sonic-slave-bullseye:master
build armhf image in armhf:
sonic-slave-bullseye:64d178951fc
sonic-slave-bullseye-armhf:latest
sonic-slave-bullseye:master
How to verify it
Why I did it
why
In order to apply different config across different platform, and use the code with a unified format, reuse syncd init script to init saiserver.
How I did it
how
Reuse syncd init script
How to verify it
Test
Test in DUT s6000 and dx010 with sonic 202205
Why I did it
1.50.x SDK based drop to fix MIGSMSFT-120 ([8102] Orchagent crash as addRoutePost failed at SAI")
How I did it
Update cisco-8000 submodule to v0.121
Why I did it
Makefile needs some dependencies from the Internet. It will fail for network related issue.
Retries will fix most of these issues.
How I did it
Add retries when running commands which maybe related with networking.
How to verify it
