ACL entry set attribute updates all the entries in the table. The correct behavior is to set the attribute on single entry.
- How I did it
Current SDK code, while setting the new attribute, is going through all the entries and updating it. Added a logic to check for requested entry and only allow for that ACL entry.
A case has filed with BRCM. Once an official fix is provided by BRCM, we will then remove this in house fix and apply the official fix.
Fix#6711
the requirement was introduced in commit 75104bb35d
to support sflow in stretch build. in buster build, the requirement
is met, no need to pin down the version.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
**- Why I did it**
After migrating to python3, the operator '/' always get a float result, but it gets integer result in python2. Need fix this in thermal_conditions.
**- How I did it**
1. cast float value to int
2. change the unit test case to cover this situation
**- How to verify it**
Manually test and regression test
Accton util applies lsmod to check if drivers are installed.
But lsmod may return error on startup and skip module installation.
Signed-off-by: roy_lee <roy_lee@edge-core.com>
check the uid before modify local user account.
when run sudo, the process the invoke nss_tacplus library
does not have priviledge to modify the user profile, and
will generate below error messages:
user_rw@sonic:~$ sudo bash
usermod: Permission denied.
usermod: cannot lock /etc/passwd; try again later.
usermod: Permission denied.
usermod: cannot lock /etc/passwd; try again later.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
prerm is needed for platform modules package to be properly removed.
Added prerm to remove installed in postinst wheel packages.
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
* Remove makefile and
As part of #6046 we have moved to python3 of dbsyncd.
Cleanup the python2 makefile and dependency.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Revert "Remove makefile and dependency for python2 of dbsyncd."
This reverts commit ceaa4f8dd9.
* Fix
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Port_config update for hwsku 7050CX3-32S-C3 - add two 10G ports.
This change is added to fix issue of "PortsOrch initialization failure" seen by previous removal of these 10G ports.
Tested on the device with new minigraph, and the PortsOrch initialization failure is not seen.
**- Why I did it**
PR https://github.com/Azure/sonic-platform-common/pull/102 modified the name of the SFF-8436 (QSFP) method to align the method name between all drivers, renaming it from `parse_qsfp_dom_capability` to `parse_dom_capability`. Once the submodule was updated, the callers using the old nomenclature broke. This PR updates all callers to use the new naming convention.
**- How I did it**
Update the name of the function globally for all calls into the SFF-8436 driver.
Note that the QSFP-DD driver still uses the old nomenclature and should be modified similarly. I will open a PR to handle this separately.
**- Why I did it**
To incorporate the below changes in DellEMC S6100, S6000 platforms.
- S6100, S6000:
- Enable 'thermalctld'
- Implement DeviceBase methods (presence, status, model, serial) for Fantray and Component
- Implement ‘get_position_in_parent’, ‘is_replaceable’ methods for all device types
- Implement ‘get_status’ method for Fantray
- Implement ‘get_temperature’, ‘get_temperature_high_threshold’, ‘get_voltage_high_threshold’, ‘get_voltage_low_threshold’ methods for PSU
- Implement ‘get_status_led’, ‘set_status_led’ methods for Chassis
- SFP:
- Make EEPROM read both Python2 and Python3 compatible
- Fix ‘get_tx_disable_channel’ method’s return type
- Implement ‘tx_disable’, ‘tx_disable_channel’ and ‘set_power_override’ methods
- S6000:
- Move PSU thermal sensors from Chassis to respective PSU
- Make available the data of both Fans present in each Fantray
**- How I did it**
- Remove 'skip_thermalctld:true' in pmon_daemon_control.json
- Implement the platform API methods in the respective device files
- Use `bytearray` for data read from transceiver EEPROM
- Change return type of 'get_tx_disable_channel' to match specification in sonic_platform_common/sfp_base.py
Changed Error log to Notice log during FDB flush notification after VLAN delete (#1618) 288fb40d8ff4ec825645c2fbab1e79f50881a9f2
- How to verify it
Create a VLAN and add member port to it. Then inject traffic on the member port for that VLAN. Ensure that FDB entry is learnt for that VLAN member port. Then remove the member port and remove VLAN. Check if you get a NOTICE log that "failed to locate VLAN" appears in syslogs.
Co-authored-by: Madhan Babu <madhan@l-csi-0241l.mtl.labs.mlnx>
Encounter error when install SONiC image if there are some onie_discovery variables assigned with multiple values inside machine.conf
- How I did it
Replace original ". /machine.conf" method and add another function to do the same thing.
- How to verify it
Add a item inside /host/machine.conf like onie_disco_ntpsrv=10.254.141.10 10.254.141.131
Do sonic_installer install to check if any error occurs
[multi_asic][vs]: Add dependency in teamd service to start after topology service.
- Why I did it
In multi-asic VS, topology service is run after database service to set up the internal asic topology.
swss and syncd have a dependency to start after topology service is run so that the interfaces are moved to right namespace and created in the right namespace. In case of multi-asic vs, during the initial boot up, when there is no configuration added, teamd service starts and swss/syncd do not start as topology service does not start. Upon loading configuration using config_db or minigraph, swss and sycnd start up , but teamd is not restarted as swss is not stopped and started. This causes teamd to be in a bad state and requires a reload of config.
- How I did it
Add dependency in teamd service to start after topology service is completed.
- How to verify it
No change in single asic vs or platform.
No change in multi-asic regular image.
Change only in multi-asic VS. Bring up a multi-asic VS image without any configration, teamd service will fail to start due to dependency failure. Load minigraph, start topology service, load configuration, ensure all services come up.
Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com>
- Why I did it
As of Azure/sonic-utilities#1297, subcommands of pcieutil have changed to remove the redundant pcie- prefix. This PR adapts calling applications (pcie-check) to the new syntax.
Resolves#6676
- How I did it
Remove pcie- prefix from pcieutil subcommands in calling applications
Also add pcieutil * to sudoers file, as pcieutil requires elevated permissions
**- Why I did it**
- Add as4630_54pe SDK configuration parameters.
**- How I did it**
- Add l3_alpm_enable=2 and ipv6_lpm_128b_enable=1 in hx5-as4630-48x1G+4x25G+2x100G.bcm.
Co-authored-by: derek_sun <derek_sun@edge-core>
Co-authored-by: derek_sun <ecsonic@edge-core.com>
**- Why I did it**
Reduce the time it takes for the ASIC FW burn as part of the automatic FW upgrade procedure.
**- How I did it**
Add -d option to mlxfwmanager tool to use the faster MST device and not the default one which is not the fastest one.
**- How to verify it**
I manually changed ASIC FW followed by reboot command in order for FW upgrade to take place on deinit.
I manually changed ASIC FW followed by hard reset in order for FW upgrade to take place on init.
Signed-off-by: liora <liora@nvidia.com>
* 28d358f 2021-02-01 | [show] Run fwutil with sudo (#1364) (HEAD) [Volodymyr Boiko]
* a50b7a2 2021-01-29 | [ecnconfig] Allow ecn unit test to run without sudo (#1390) [Neetha John]
* 8a1109e 2021-01-29 | [sonic-installer] Add information to syslog (#1369) [Dmytro]
* c7c01e4 2021-01-27 | [show] fix "show interfaces breakout" command (#1198) [Dmytro Shevchuk]
* 7a8024a 2021-01-27 | Prevent user from adding more then a single untagged VLAN to an interface (#1382) [Eran Dahan]
* 41e62c6 2021-01-26 | [pcieutil] Add 'pcie-aer' sub-command to display AER stats (#1169) [Arun Saravanan Balachandran]
* 47f412b 2021-01-25 | Improve robustness of consutil plugin loading (#1353) [Samuel Angebault]
* 64aa1b8 2021-01-26 | [show] Fix warnings, related to gearbox, while show commands execution (#1343) [maksymbelei95]
* ff226d0 2021-01-25 | Prevent configuring IP interface on a port which is a member of VLAN (#1374) [Eran Dahan]
* f1522b9 2021-01-21 | [config_mgmt.py]: Set leaf-list to empty list while port breakout. (#1268) [Praveen Chaudhary]
* 99c05d5 2021-01-21 | add vlan_intf_object only if there are ipv4 or ipv6 mappings (#1377) [Sumukha Tumkur Vani]
* b082684 2021-01-21 | [ecn] Add tests for ecnconfig command (#1372) [Neetha John]
* 23e0920 2021-01-21 | [sfpshow] Enhance QSFP-DD DOM information (#1207) [shlomibitton]
* f4edba1 2021-01-20 | [ecnconfig] handle backend port names when extracting port I/F ID from the port name (#1361) [Mahesh Maddikayala]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Current mutli-asic vs hwsku consists of 6 asics with each asic having 32 interfaces.
When bringing this up, below issue was seen:
When all 32 interfaces in each namespace (sonic interfaces and linux interface) is set to 9100 mtu, DMA error is seen "DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:06:03.0" which can be fixed by updating swiotlb=65536 in /host/grub/grub.cfg .
Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com>
When we add allow-list key with action above route-map gets updated . For eg if we add deny action above template will become to no-export community. Now if we delete the key Issue is we still keep the no-export and do not move back to drop community.
This PR fixes this issue by rolling back default route-map community value back to constants.yml default action.
**Why I did it**
Disable SDK extended dump due to issue found
**How I did it**
Update SAI submodule
**How to verify it**
Verify the SDK extended dump is not called.
Signed-off-by: Eran Dahan <erand@nvidia.com>
* Bump version number to 2.0.32-1 to include a fix for a memory-leak
found during testing. A wrong API is used to free the cJSON
data-structure, which only frees the first pointed-to structure.
The proper API should recursively free all structures.
Signed-off-by: Garrick He <garrick_he@dell.com>
This PR updates the following commits in sonic-platform-common
6ad0004 [component] add auto_update_firmware() to support the auto update. (#106)
49076a9 [sonic_y_cable] Add support for measuring BER and EYE scan and running Loopback, PRBS modes on the Y cable (#158)
6b12b4c [sfp] Add parsing the dom_capability to sff8472 (#102)
7fc76b9 [sonic_pcie] Add get_pcie_aer_stats and its common implementation (#144)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Archive compiled Debian packages and Python wheels so that the artifacts can be downloaded and used by other pipelines.
Also archive related log files.
