Why I did it
Support to add SONiC OS Version in device info.
It will be used to display the version info in the SONiC command "show version". The version is used to do the FIPS certification. We do not do the FIPS certification on a specific release, but on the SONiC OS Version.
SONiC Software Version: SONiC.master-13812.218661-7d94c0c28
SONiC OS Version: 11
Distribution: Debian 11.6
Kernel: 5.10.0-18-2-amd64
How I did it
Why I did it
Add support for SFP refactor on Nokia-7215 Marvell armhf platform.
Platform: armhf-nokia_ixs7215_52x-r0
HwSKU: Nokia-7215
ASIC: marvell
Port Config: 48x1G + 4x10G (SFP+)
How I did it
Modify sfp.py to support SFP refactor optoe driver and platform.json to facilitate proper OC test completion.
How to verify it
Build armhf target for Nokia-7215 and verify proper Xcvrd and SFP refactor operation.
To include the following DNX changes:
Revert patch and add official SDK/SAI fix for the below CSPs
a. CS00012282080 : syncd crashes after a speed change due to "cosq src vsqs gport get" failure
b. CS00012281200 : J2C+ : Scope of config.bcm SOC property bcm_stat_interval
Fixes for:
a. CS00012278343: SONiC J2c+ Macsec: Shutting down LAG members which have macsec cause
remaining active LAG members to go down
b. CS00012279717: Instance_id printed in SAI syslog messages are truncated to 9 bytes
Why I did it
Release Notes for Cisco 8808 platform:
Thermal sensor driver support
Release Notes for Cisco 8101-32FH-O:
Support for unwanted Alarm Suppression
How I did it
Update platform version to 202205.2.2.1 (v0.15)
How to verify it
Why I did it
Fixed syncd syslog errors reported in issue sonic-net/SONiC#1248Fixessonic-net/SONiC#1248
How I did it
Compile and load the SAI debian in SONiC 202205 image.
How to verify it
Verify PTF autorestart testcase passes.
Signed-off-by: rajkumar38 <rpennadamram@marvell.com>
Why I did it
Updated the port_alias name as per the SONiC HLD [b70bb0c7da/doc/sonic-port-name.md]
Updated channel number to breakout interfaces
How I did it
update platform version to 0.13
Why I did it
Update SAI xgs version to 7.1.36.4 to include the following changes.
JIRA# SONIC-69731 (7.1.33.4)
Issue Summary: SAI_SWITCH_ATTR_SWITCH_HARDWARE_INFO brcm_sai_get_switch_attribute returns null.
Root Cause: Not implemented.
Fix Description: Get support for SAI switch attr SAI_SWITCH_ATTR_SWITCH_HARDWARE_INFO added
JIRA# SONIC-70737 (7.1.34.4)
Issue Summary: ECN being marked as CE even without congestion
Root Cause: ecn_thresh was set to very low value and packets were 100% marked.
Fix Description: ecn_thresh set to correct value
backport SONIC-70081 to SAI7.1 (7.1.35.4)
egress lossy queue PFC Rx fix:ignore PFC signals from egress
Update git submodules (7.1.36.4)
Update sdk-src/hsdk_6.5.24_SAI_7.1.0_GA from branch 'hsdk_6.5.24_SAI_7.1.0_GA'
to 57d0e360269c4ab659c4790ae471aa4dba2532b4
[SAI_BRANCH rel_ocp_sai_7_1] Broadcom image build failed with SAI 7.1 in DMZ repo (on bullseye)
How I did it
Update SAI xgs code.
How to verify it
Run the SONiC and SAI test with the 7.1 SAI pipeline.
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
* Remove apt package lists and make macro to clean up apt and python cache
Remove the apt package lists (`/var/lib/apt/lists`) from the docker
containers. This saves about 100MB.
Also, make a macro to clean up the apt and python cache that can then be
used in all of the containers. This helps make the cleanup be consistent
across all containers.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Chassis:
Fixed Multiple orchagent crashes due to BULK create failure
added new line card support
Addressed T2 snmp test failures
Addressed reboot issues
Chassis and Fixed:
Addressed dshell client issues
HWSKU name update from Cisco-8101-T32/Cisco-8101-C48T8 to Cisco-8101-O32/Cisco-8101-C48O8
How I did it
update to cisco version 0.12
Why I did it
Update SAI xgs version to 7.1.36.4 to include the following changes and migrate xgs to DMZ repo.
JIRA# SONIC-69731 (7.1.33.4)
Issue Summary: SAI_SWITCH_ATTR_SWITCH_HARDWARE_INFO brcm_sai_get_switch_attribute returns null.
Root Cause: Not implemented.
Fix Description: Get support for SAI switch attr SAI_SWITCH_ATTR_SWITCH_HARDWARE_INFO added
JIRA# SONIC-70737 (7.1.34.4)
Issue Summary: ECN being marked as CE even without congestion
Root Cause: ecn_thresh was set to very low value and packets were 100% marked.
Fix Description: ecn_thresh set to correct value
backport SONIC-70081 to SAI7.1 (7.1.35.4)
egress lossy queue PFC Rx fix:ignore PFC signals from egress
Update git submodules (7.1.36.4)
Update sdk-src/hsdk_6.5.24_SAI_7.1.0_GA from branch 'hsdk_6.5.24_SAI_7.1.0_GA'
to 57d0e360269c4ab659c4790ae471aa4dba2532b4
[SAI_BRANCH rel_ocp_sai_7_1] Broadcom image build failed with SAI 7.1 in DMZ repo (on bullseye)
How I did it
Update SAI xgs code.
How to verify it
Run the SONiC and SAI test with the 7.1 SAI pipeline.
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
Why I did it
To include DNX fix
Temp workaround for CS00012281200: J2C+ : Scope of config.bcm SOC property bcm_stat_interval
How I did it
Updated SAI version
How to verify it
Basic validation on DNX platform
- Why I did it
Some scripts on syncd require Python2 support.
- How I did it
Add Python2 to syncd docker
- How to verify it
Run manually python scripts under Nvidia SDK debug to ensure they are working
* sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release
* sx kernel is downloaded as zip from Spectrum-SDK-Drivers
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
Why I did it
Platform cases test_tx_disable, test_tx_disable_channel, test_power_override failed in dx010.
How I did it
Add i2c access algorithm for CPLD i2c adapters.
How to verify it
Verify it with platform_tests/api/test_sfp.py::TestSfpApi test cases.
- Why I did it
Advance hw-mgmt service to V.7.0020.4100
Add missing thermal sensors that are supported by hw-mgmt package
Delay system health service before hw-mgmt has started on Mellanox platform in order to avoid reading some sensors before ready.
Depends on sonic-net/sonic-linux-kernel#305
- How I did it
1. Update hw mgmt version
2. Add missing sensors
3. Delay service
- How to verify it
Regression test.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
Code drop with incremental fixes for Cisco 8808 and Cisco 8101-32FH-O platforms
Support for ordered ECMP capability
Support for BFD Serviceability CLI
Support for VxLAN Serviceability CLI
Support for 200G Fabric port speed for Fabric Card 8808-FC0 and Line Card 88-LC0-36FH-M/88-LC0-36FH-MO
PFC support for Q200 ASIC based line cards
Support for Single-TOR and Dual-TOR on Cisco 8102-64H-O Platform
How I did it
update cisco 8000 tag
How to verify it
Fixes#13568
Backport of #13837
Upgrade from old image always requires squashfs mount to get the next image FW binary. This can be avoided if we put FW binary under platform directory which is easily accessible after installation:
admin@r-spider-05:~$ ls /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
/host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
admin@r-spider-05:~$ ls -al /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa
lrwxrwxrwx 1 root root 66 Feb 8 17:57 /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa -> /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
- Why I did it
202211 and above uses different squashfs compression type that 201911 kernel can not handle. Therefore, we avoid mounting squashfs altogether with this change.
- How I did it
Place FW binary under /host/image-/platform/mlnx/, soft links in /etc/mlnx are created to avoid breaking existing scripts/automation.
/etc/mlnx/fw-SPCX.mfa is a soft link always pointing to the FW that should be used in current image
mlnx-fw-upgrade.sh is updated to prefer /host/image-/platform/mlnx location and fallback to /etc/mlnx in squashfs in case new location does not exist. This is necessary to do image downgrade.
- How to verify it
Upgrade from 201911 to 202205
202205 to 201911 downgrade
202205 -> 202205 reboot
ONIE -> 202205 boot (First FW burn)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
sfp_event.py gets a PMPE message when a cable event is available. In PMPE message, there is no label port available. Current sfp_event.py is using sx_api_port_device_get to get 64 logical ports attributes, and find the label port from those 64 attributes. However, if there are more than 64 ports, sfp_event.py might not be able to find the label port and drop the PMPE message.
- How I did it
Don't use hardcoded 64, get logical port number instead.
- How to verify it
Manual test
Co-authored-by: Junchao-Mellanox <57339448+Junchao-Mellanox@users.noreply.github.com>
add SEU reporting on chassis
fix fallback logic for Clearlake eeprom identification
fix fan speed reporting for a specific model
move pcie timeout configuration for Upperlake in platform code (deprecates hwsku-init)
* Why I did it
Enable Test sai api on bfn container with a lightweight container(saiserver).
[SAI-PTF][mlnx]Enable saiserver test container on mlnx container
How I did it
enable saiserver container on mlnx platform.
add docker-saiserver-mlnx.mk for building saiserver container
in platform/barefoot/docker-saiserver-mlnx, add necessary files that needs in saiserver container
How to verify it
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Why I did it
Command "sudo sfputil show error-status -hw" shows "OK (Not implemented)" in the output.
How I did it
Add a new SFP API get_error_description support in Nokia sonic-platform sfp.py module.
How to verify it
Run the new image and execute command "sudo sfputil show error-status -hw"
Co-authored-by: Pavan-Nokia <120486223+Pavan-Nokia@users.noreply.github.com>
Why I did it
High CPU utilization by entropy.py
How I did it
Remove entropy script as it does not work anymore and is no longer needed for bullseye(202205).
In Buster(202012) the max available poolsize (entropy_avail) for entropy is 4096 and our entropy.py script was based on this value. With the change in kernel to bullseye on 202205 this entropy poolsize was changed to 256 which also causes our script to fail.
This script was initially added to provide SW assistance to improve the system entropy value available early on in the Sonic boot sequence on buster.
On bullseye (Linux kernel 5.10) this is no longer needed as this feature has been improved.
How to verify it
run "top" command to check CPU usage.
Co-authored-by: Pavan-Nokia <120486223+Pavan-Nokia@users.noreply.github.com>
- Why I did it
Added platform specific script to be invoked during SAI failure dump. Added some generic changes to mount /var/log/sai_failure_dump as read write in the syncd docker
- How I did it
Added script in docker-syncd of mellanox and copied it to /usr/bin
- How to verify it
Manual UT and new sonic-mgmt tests
Co-authored-by: Sudharsan Dhamal Gopalarathnam <dgsudharsan@users.noreply.github.com>
* Enable marvell-armhf saiserver docker
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
* fix libsaithriift build env
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
* fix thrift 014 dependent issue in armhf
* fix build env
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
* [sai_ptf]fix thrift armhf build
in armhf buidl failed as no python command
how
add a checker for different python command, python/python3 and base on result use the right command
verify
container build
* [Thrift_014[armhf]]Fix libboost_unit_test_framework.a not found during build
Why
error happen build thirft in armhf
How
fix this issue, add a soft link for the dependent file
Verify
Build pipeline
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* add metadata dependence
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
* change build pipeline
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
---------
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Co-authored-by: richardyu-ms <richard.yu@microsoft.com>
Why I did it
To pick up the below DNX fixes:
CS00012275689: DSCP->TC and TC->QUEUE mappings are not happening for packets received on LAG ports (SONIC-69367)
CS00012277618: Crash in _brcm_sai_dnx_irpp_port_core_get (SONIC-70001)
How I did it
Updated SAI branch with the above fixes
How to verify it
Ran basic sonic-mgmt tests with the SAI debian on XGS and DNX platforms
Why I did it
[Seastone] Enhancement fix for PR12200 syseeprom issue.
How I did it
Enhance the fix through replace the hardcoded devnum to bash variable
How to verify it
show platform syseeprom or decode-syseeprom
Co-authored-by: Ikki Zhu <79439153+qnos@users.noreply.github.com>
add module reboot APIs for chassis
add supervisor module on linecard (fixes show chassis module midplane-status)
improve RTC update mechanism and sync every 10 mins
fix sbtsi temp sensor presence/thresholds
fix Mineral status leds
remove thermal object on xcvrs
misc fixes
- Why I did it
To include latest fixes and new functionality
SAI
1. Temporary WA for query enum capabilities for tunnel peer mode, to not return P2P
2. sai debug dump returns while last extra dump is running
3. open inner SRC and DST IP for ECMP / LAG general hash objects
4. tunnel peer mode returns hard coded
5. tunnel decap dscp mode
6. support default tunnel src ip
7. failure to add a port to a LAG in VLANs configured with flood_ctrl
8. Add P2P peer mode for IP in IP tunnels
9. Add per port IP counters
10. Clean up VXLAN srcport static (XML) functionality, as only dynamic (API) is in use
11. Fix enum capabilities of native hash fields
12. sai_acl_db_group_ptr usage
13. Clean QoS config of the LAG when all members was removed (bug
SDK/FW
1. Fixed bug in recovery mechanism in case of I2C error when trying to access the XSFP module.
2. On the NVIDIA Spectrum-2 switch, when receiving a packet with Symbol Errors on ports that are configured to cut-thought mode, a pipeline might get stuck.
3. On the Spectrum-2 and Spectrum-3 switch, if you enable ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked.
4. Modifying existing entry/Adding new one when switch is at its maximum capacity (full by maximum allowed entries from any type such as routes, FDB, and so forth), will fail with an error.
5. When many ports are active (e.g., 70 ports up), and the configuration of shared buffer is applied on the fly, occasionally, the firmware might get stuck.
6. When a system has more than 256 ACL rules, on rare occasion, removing/adding rules may cause some ACL rules not to work.
7. On SN2201 system, on RJ45 port, the link might appear in 'down' state even if it operations properly.
8. Layer 4 port information is not initialized for BFD packet event. To address the issue, remote peer UDP port information was added in BFD packet event.
9. When setting LAG as a SPAN analyzer, the distributor mode of the LAG members was not taken into account. It may happen that the LAG member with distributor mode disabled will be set as a SPAN analyzer port.
- How I did it
Updated SDK/SAI submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
