- Why I did it
The cable thermal sensors will be deprecated from the kernel driver. When cable host management is enabled, NOS will fetch the cable temperature from cable EEPROM, kernel driver will not provide the sysfs anymore.
- How I did it
Remove the relevant sensor form the conf files
- How to verify it
Run sonic mgmt sensor test
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
src/sonic-platform-common
```
* 5430f6f - (HEAD -> 202311, origin/202311) Change get_transceiver_info_firmware_versions return type to dict (#440) (2 days ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* c711b061 - (HEAD -> 202311, origin/202311) [Mellanox buffer migrator] Do not touch the buffer model on generic SKUs if the buffer configuration is empty (#3114) (2 days ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
### Why I did it
Fix flakiness of eventd UT - run sub after capture service starts
##### Work item tracking
- Microsoft ADO **(number only)**:25650744
#### How I did it
Run sub socket after capture socket is initialized
#### How to verify it
Pipeline
#### Why I did it
src/sonic-platform-daemons
```
* 7792838 - (HEAD -> 202311, origin/202311) Move firmware version fields to TRANSCEIVER_FIRMWARE_INFO table (#435) (22 hours ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Enable build cache for marvell-arm64 build to decrease PR check duration.
Work item tracking
Microsoft ADO (number only): 26340500
How I did it
How to verify it
- Why I did it
when reading sysfs fd upon python poller events, there's end of line garbage like "# 012" (without space between the 2 parts) trailing the real value of 1 or 0
- How I did it
using python strip() to remove end of line
- How to verify it
run the CMIS host management feature on a switch
wait few minutes until switch completes boot up sequence including CMIS host manager
then disconnect or reconnect a port to create a poller event
#### Why I did it
src/sonic-platform-daemons
```
* 121b338 - (HEAD -> 202311, origin/202311) Unable to retrieve media settings with just Vendor name (#419) (10 hours ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
- Why I did it
Fix the code to work also after warm reboot to work with FW controlled ports.
In warm reboot the control state sysfs of each port does not change unlike reboot or fast boot.
- How I did it
1. Check procfs cmdline if warm reboot done this is due to the fact pmon don't recognize warm reboot when it's taking place since pmon is loaded after warm reboot is finished.
2. If warm reboot done, check in static detection part for each port if it's FW controlled. If so, leave it this way and stop the state machine flow (set it to final state).
- How to verify it
1. Boot a switch with CMIS host management with at least one FW controlled port (non active cables or non cmis cables) then run warm reboot.
2. Verify no errors of sysfs reading appears for control sysfs
#### Why I did it
src/sonic-swss
```
* 2910b0e3 - (HEAD -> 202311, origin/202311) Fix the Orchagent crash seen during Port channel OC test cases. (#3042) (7 days ago) [saksarav-nokia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* b2125761 - (HEAD -> 202311, origin/202311) [chassis] fix show bgp summary when no neighbors are present on one ASIC (#3158) (2 days ago) [Arvindsrinivasan Lakshmi Narasimhan]
* 54595c1e - [202311]Fix the sfputil treats page number as decimal instead of hexadecimal (#3153) (#3160) (5 days ago) [Sudharsan Dhamal Gopalarathnam]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-sairedis
```
* 23481f0 - (HEAD -> 202311, origin/202311) Skip FABRIC PORT Attributes from sairedis logging (#1339) (2 days ago) [saksarav-nokia]
* 682e860 - Revert "add if statement for module control mode support" (#1341) (4 days ago) [dbarashinvd]
* 3621a18 - SAI submodule update to pick the sai-thrift support added to read VOQ counters (#1332) (4 days ago) [saksarav-nokia]
* 52cd15b - Fix code coverage and ASAN not being enabled (#1338) (5 days ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
These changes adjust Nokia IXR7250 thermal sensor logging thresholds.
Why I did it
To modify the thermal sensor logging thresholds used on LC and Supervisor.
How I did it
Modified the JSON based thermal logging thresholds used to determine when to log current high sensor temperature and hottest sensor margin fluctuations.
How to verify it
Verify that syslog messages indicating current (high) temperature and margin values are only logged when these respective values fluctuate by at least 5 degrees.
Fix IPV6 forced-mgmt-route not work issue
Why I did it
IPV6 forced-mgmt-route not work
When add a IPV6 route, should use 'ip -6 rule add pref 32764 address' command, but currently in the template the '-6' parameter are missing, so the IPV6 route been add to IPV4 route table.
Also this PR depends on #17281 , which will fix the IPV6 'default' route table missing in IPV6 route lookup issue.
Microsoft ADO (number only):24719238
#### Why I did it
src/sonic-utilities
```
* 31a6584c - (HEAD -> 202311, origin/202311) Fix `sudo config load_mgmt_config` fails with error "File /var/run/dhclient.eth0.pid does not exist" (#3149) (16 hours ago) [Mai Bui]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
The PR introduced a bug for slim image build, #17905, by which the sonic_asic_platform is missing when build docker image for slim image.
[ building ] [ target/docker-dhcp-relay.gz ]
/sonic/dockers/docker-dhcp-relay/cli-plugin-tests /sonic
/sonic
Traceback (most recent call last):
File "/usr/local/bin/j2", line 8, in <module>
sys.exit(main())
File "/usr/local/lib/python3.9/dist-packages/j2cli/cli.py", line 202, in main
output = render_command(
File "/usr/local/lib/python3.9/dist-packages/j2cli/cli.py", line 186, in render_command
result = renderer.render(args.template, context)
File "/usr/local/lib/python3.9/dist-packages/j2cli/cli.py", line 85, in render
return self._env \
File "/usr/lib/python3/dist-packages/jinja2/environment.py", line 1090, in render
self.environment.handle_exception()
File "/usr/lib/python3/dist-packages/jinja2/environment.py", line 832, in handle_exception
reraise(*rewrite_traceback_stack(source=source))
File "/usr/lib/python3/dist-packages/jinja2/_compat.py", line 28, in reraise
raise value.with_traceback(tb)
File "/sonic/dockers/docker-dhcp-relay/Dockerfile.j2", line 48, in top-level template code
{% if build_reduce_image_size != "y" or sonic_asic_platform != "broadcom" %}
jinja2.exceptions.UndefinedError: 'sonic_asic_platform' is undefined
make: *** [slave.mk:1072: target/docker-dhcp-relay.gz] Error 1
make: *** Waiting for unfinished jobs....
[ finished ] [ target/docker-swss-layer-bullseye.gz ]
[ finished ] [ target/docker-syncd-brcm-dnx.gz ]
make[1]: *** [Makefile.work:608: target/sonic-broadcom.bin] Error 2
make[1]: Leaving directory '/data/work/1/s'
make: *** [Makefile:41: target/sonic-broadcom.bin] Error 2
And why it slipped the PR test? PR test doesn't compile with slim option, it won't check sonic_asic_platform != "broadcom" for PR build.
Work item tracking
Microsoft ADO (number only):
How I did it
Export sonic_asic_platform for docker build in slave.mk
How to verify it
build with slim image option.
Co-authored-by: StormLiangMS <89824293+StormLiangMS@users.noreply.github.com>
#### Why I did it
src/linkmgrd
```
* 70b6d15 - (HEAD -> 202311, origin/202311) [active-standby] Fix `show mux status` inconsistency introduced by orchagent rollback (#225) (3 days ago) [Jing Zhang]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-host-services
```
* 054aa7a - (HEAD -> 202311, origin/202311) Fixed ip6table internal_docker_ip_traffic rule command for multi-asic (#94) (3 days ago) [anamehra]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 9bf5a17 - (HEAD -> 202311, origin/202311) Implementing set_optoe_write_timeout API (#422) (3 days ago) [mihirpat1]
* c8617b8 - APIs to help in finding NPU SI settings (#410) (3 days ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-daemons
```
* dbaa079 - (HEAD -> 202311, origin/202311) Support 800G ifname in xcvrd (#416) (2 days ago) [Anoop Kamath]
* e4272c1 - 400ZR not linking up with latest SONiC master image (#410) (3 days ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-snmpagent
```
* 5d5cfe5 - (HEAD -> 202311, origin/202311) Set the execute bit on sysDescr_pass.py (#306) (3 days ago) [Andre Kostur]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 55d53b79 - (HEAD -> 202311, origin/202311) [copporch] Add safeguard during policer attribute update (#2977) (3 days ago) [Vivek]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* 2046e66c - (HEAD -> 202311, origin/202311) Reduce generate_dump mem usage for cores (#3052) (3 days ago) [davidm-arista]
* fbd6c916 - Disable Key Validation feature during sonic-installation for Cisco Platforms (#3115) (3 days ago) [selvipal]
* 88c027f0 - [Techsupport]Adding more FRR and BGP dumps (#3118) (3 days ago) [Sudharsan Dhamal Gopalarathnam]
* 555ecf64 - [chassis]: Support show ip bgp summary to display without error when no external neighbors are configured on chassis LC (#3099) (3 days ago) [Arvindsrinivasan Lakshmi Narasimhan]
* 1515edcb - [db_migrator]Remove route migration (#3068) (3 days ago) [Sudharsan Dhamal Gopalarathnam]
* 8862c114 - Modify teamd retry count script to base BGP status on default BGP status (#3069) (3 days ago) [Saikrishna Arcot]
* f4b5ef21 - Add all SKUs to the generic config update list (#3131) (3 days ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* be6224a3 - (HEAD -> 202311, origin/202311) [202311] Migrate GNMI table (#3138) (10 hours ago) [ganglv]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
ICM reported due to "BGPMon Process exited" which was caused by json load exception.
Work item tracking
Microsoft ADO (number only):
25916773
How I did it
Add an exception handle during json load.
How to verify it
Verified locally, add debug log to modify the output string of cmd to make it not with json formation, then check the syslog.
### Why I did it
Fix the krb5 vulnerable issue
CVE-2021-36222 allows remote attackers to cause a NULL pointer dereference and daemon crash
CVE-2021-37750 NULL pointer dereference in kdc/do_tgs_req.c via a FAST inner body that lacks a server field
DSA 5286-1 remote code execution
##### Work item tracking
- Microsoft ADO **(number only)**: 26577929
#### How I did it
Upgrade the krb5 version to 1.18.3-6+deb11u14+fips.
- Why I did it
Improve boot performance mostly needed for fast and warmboot
- How I did it
Use cached variable.
- How to verify it
Boot the system. Simply do "systemd-analyze blame" and look at service start time.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- The ubuntu 2004 is needed by 202311
- Because the artifacts of ubuntu2004 are used by other repos, a daily building is needed without an updating of this repo for a long time.
Signed-off-by: Ze Gan <ganze718@gmail.com>
Change orchagent stuck message from ERR to WARNING
#### Why I did it
During switch initialization, sometime Orchagent will busy for more than 40seconds and will trigger process stuck workdog error.
To improve this issue, change watchdog error message to warning message.
##### Work item tracking
- Microsoft ADO: 26517622
#### How I did it
Change orchagent stuck message from ERR to WARNING.
#### How to verify it
Pass all UT.
### Description for the changelog
Change orchagent stuck message from ERR to WARNING.
#### Why I did it
src/sonic-platform-common
```
* 7c2ad66 - (HEAD -> 202311, origin/202311) Tx/Rx power values should be rounded up to 3 decimal places (#432) (4 hours ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
### Why I did it
Disable eventd at buildtime for slim images
##### Work item tracking
- Microsoft ADO **(number only)**:26386286
#### How I did it
Add flags for disabling eventd and only copy rsyslog conf files when eventd is included and not slim image
#### How to verify it
Manual testing
What I did:
Added support when TSA is done on Line Card make sure it's completely
isolated from all e-BGP peer devices from this LC or remote LC
Why I did:
Currently when TSA is executed on LC routes are withdrawn from it's connected e-BGP peers only. e-BGP peers on remote LC can/will (via i-BGP) still have route pointing/attracting traffic towards this isolated LC.
How I did:
When TSA is applied on LC all the routes that are advertised via i-BGP are set with community tag of no-export so that when remote LC received these routes it does not send over to it's connected e-BGP peers.
Also once we receive the route with no-export over iBGP match on it and and set the local preference of that route to lower value (80) so that we remove that route from the forwarding database. Below scenario explains why we do this:
- LC1 advertise R1 to LC3
- LC2 advertise R1 to LC3
- On LC3 we have multi-path/ECMP over both LC1 and LC2
- On LC3 R1 received from LC1 is consider best route over R1 over received from LC2 and is send to LC3 e-BGP peers
- Now we do TSA on LC2
- LC3 will receive R1 from LC2 with community no-export and from LC1 same as earlier (no change)
- LC3 will still get traffic for R1 since it is still advertised to e-BGP peers (since R1 from LC1 is best route)
- LC3 will forward to both LC1 and LC2 (ecmp) and this causes issue as LC2 is in TSA mode and should not receive traffic
To fix above scenario we change the preference to lower value of R1 received from LC2 so that it is removed from Multi-path/ECMP group.
How I verfiy:
UT has been added to make sure Template generation is correct
Manual Verification of the functionality
sonic-mgmt test case will be updated accordingly.
Please note this PR is on top of this :#16714 which needs to be merged first.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Why I did it
Fan tolerance checking is done through new APIs, is_under_speed and is_over_speed, which populate corresponding fields into the database. speed_tolerance is no longer used and was removed, but system-health was not updated and indicates failures:
ADO: 25279165
root@sonic/# show system-health summary
System status summary
System status LED red_blink
Services:
Status: OK
Hardware:
Status: Not OK
Reasons: Failed to get speed tolerance for fantray5.fan1
Failed to get speed tolerance for fantray5.fan0
Failed to get speed tolerance for fantray4.fan1
Failed to get speed tolerance for fantray4.fan0
Failed to get speed tolerance for fantray3.fan1
Failed to get speed tolerance for fantray3.fan0
Failed to get speed tolerance for fantray2.fan1
Failed to get speed tolerance for fantray2.fan0
Failed to get speed tolerance for fantray1.fan1
Failed to get speed tolerance for fantray1.fan0
Failed to get speed tolerance for fantray0.fan1
Failed to get speed tolerance for fantray0.fan0
Failed to get speed tolerance for PSU1.fan0
Failed to get speed tolerance for PSU0.fan0
How I did it
Updated hardware_checker.py in system-health to consume new is_under_speed and is_over_speed database entries instead of speed_tolerance and hard-coded calculations.
How to verify it
root@sonic:/# show system-health summary
System status summary
System status LED green
Services:
Status: OK
Hardware:
Status: OK
### Why I did it
Github issue: https://github.com/sonic-net/sonic-buildimage/issues/16356. The YANG definition breaks GCU feature.
We can either update sonic_yang and GCU's search algorithm to enable the same key count case or simply update YANG model to solve the issue.
The pros for update YANG model are it could solve the issue directly and we don't need to handle the complicate search algorithm in sonic_yang and GCU. This is the only YANG model that has this issue.
### How I did it
Combine two list into one. The previous YANG validation unit tests are still applicable.
#### How to verify it
Unit test and E2E test
