Accton util applies lsmod to check if drivers are installed.
But lsmod may return error on startup and skip module installation.
Signed-off-by: roy_lee <roy_lee@edge-core.com>
- Apply device MAC on port host interface when port is removed from LAG.
- [Shared Headroom]: fixed watermark handling for SHP flow
- Decrease verbosity of policer unbind message when no policer is attached
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
check the uid before modify local user account.
when run sudo, the process the invoke nss_tacplus library
does not have priviledge to modify the user profile, and
will generate below error messages:
user_rw@sonic:~$ sudo bash
usermod: Permission denied.
usermod: cannot lock /etc/passwd; try again later.
usermod: Permission denied.
usermod: cannot lock /etc/passwd; try again later.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
prerm is needed for platform modules package to be properly removed.
Added prerm to remove installed in postinst wheel packages.
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
* Remove makefile and
As part of #6046 we have moved to python3 of dbsyncd.
Cleanup the python2 makefile and dependency.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Revert "Remove makefile and dependency for python2 of dbsyncd."
This reverts commit ceaa4f8dd9.
* Fix
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Port_config update for hwsku 7050CX3-32S-C3 - add two 10G ports.
This change is added to fix issue of "PortsOrch initialization failure" seen by previous removal of these 10G ports.
Tested on the device with new minigraph, and the PortsOrch initialization failure is not seen.
sonic-swss:
- [Mux] Route handling based on mux status, kernel tunnel support (#1615)
- Reduce noise during frequent route update (#1624)
- Changed Error log to Notice log during FDB flush notification after VLAN delete (#1618)
- [PortsOrch] Add reference counting to ports for ACL bindings (#1614)
- [crm]: Ignore unsupported/non-implemented switch attributes (#1613)
- [Mux] Fix repeating logs in case of tunnel creation fail (#1610)
sonic-utilities:
- [config reload]: Restart mux container (#1401)
- [storyteller] Enhance the storyteller utility (#1400)
- [show] Fix int status when portchannel is in the system (#1376)
- [config][show] cli support for retrieving ber, eye-info and configuring prbs, loopback on Y-cable (#1386)
- Skip route check for tun0 interfaces (#1399)
- do not parse stderr to get correct routing stack (#1398)
- [storyteller] allow storyteller to work on downloaded logs (#1388)
- [show] Run fwutil with sudo (#1364)
Signed-off-by: Danny Allen <daall@microsoft.com>
The Portchannels were not getting cleaned up as the cleanup activity was taking more than 10 secs which is default docker timeout after which a SIGKILL will be send.
Fixes#6199
To check if it works out for this issue in 201911 ? #6503
This issue is significantly seen in master branch compared to 201911 because the Portchannel cleanup takes more time in master. Test on a DUT with 8 Port Channels.
master
admin@str-s6000-acs-8:~$ time sudo systemctl stop teamd
real 0m15.599s
user 0m0.061s
sys 0m0.038s
Sonic 201911.v58
admin@str-s6000-acs-8:~$ time sudo systemctl stop teamd
real 0m5.541s
user 0m0.020s
sys 0m0.028s
1. BRCM SAI Debian build need not have any Kernel version dependency - Starting with 4.3 BRCM made changes in SAI so that this dependency has been cleaned up. We can now remove the Kernel Version dependency from Azure Pipeline build script.
2. Bypass PEER_MODE p2mp setting causing SYNCd crash on non-TD3 SKUs - Temporarily patch BRCM SAI code to not cause SYNCd crash when Orchagent program SAI_TUNNEL_ATTR_PEER_MODE: SAI_TUNNEL_PEER_MODE_P2MP on Non-TD3 SKUs. Will remove this when BRCM provide proper fix to address this issue.
BRCM SDK 6.5.21 includes firmware updates (premier cancun) for TD3 platforms. The firmware update is required on TD3 platforms, which is packaged with BCMSAI 4.3.0.10.
**- How I did it**
Updated BCM config with a new variable that specifies the firmware package path. SDK uses this path to locate firmware packages and load during cold boot.
**- How to verify it**
bsv
BRCM SAI ver: [4.3.0.10], OCP SAI ver: [1.7.1], SDK ver: [sdk-6.5.21] CANCUN ver: [5.3.3]
drivshell>
admin@str2-7050cx3-acs-02:~$ bcmsh
Press Enter to show prompt.
Press Ctrl+C to exit.
NOTICE: Only one bcmsh or bcmcmd can connect to the shell at same time.
drivshell>cancun stat
cancun stat
UNIT0 CANCUN:
CIH: LOADED
Ver: 06.06.01
CMH: LOADED
Ver: 06.06.01
SDK Ver: 06.05.21
CCH: LOADED
Ver: 06.06.01
SDK Ver: 06.05.21
CEH: LOADED
Ver: 06.06.01
SDK Ver: 06.05.21
drivshell>
**- Why I did it**
PR https://github.com/Azure/sonic-platform-common/pull/102 modified the name of the SFF-8436 (QSFP) method to align the method name between all drivers, renaming it from `parse_qsfp_dom_capability` to `parse_dom_capability`. Once the submodule was updated, the callers using the old nomenclature broke. This PR updates all callers to use the new naming convention.
**- How I did it**
Update the name of the function globally for all calls into the SFF-8436 driver.
Note that the QSFP-DD driver still uses the old nomenclature and should be modified similarly. I will open a PR to handle this separately.
**- Why I did it**
To incorporate the below changes in DellEMC S6100, S6000 platforms.
- S6100, S6000:
- Enable 'thermalctld'
- Implement DeviceBase methods (presence, status, model, serial) for Fantray and Component
- Implement ‘get_position_in_parent’, ‘is_replaceable’ methods for all device types
- Implement ‘get_status’ method for Fantray
- Implement ‘get_temperature’, ‘get_temperature_high_threshold’, ‘get_voltage_high_threshold’, ‘get_voltage_low_threshold’ methods for PSU
- Implement ‘get_status_led’, ‘set_status_led’ methods for Chassis
- SFP:
- Make EEPROM read both Python2 and Python3 compatible
- Fix ‘get_tx_disable_channel’ method’s return type
- Implement ‘tx_disable’, ‘tx_disable_channel’ and ‘set_power_override’ methods
- S6000:
- Move PSU thermal sensors from Chassis to respective PSU
- Make available the data of both Fans present in each Fantray
**- How I did it**
- Remove 'skip_thermalctld:true' in pmon_daemon_control.json
- Implement the platform API methods in the respective device files
- Use `bytearray` for data read from transceiver EEPROM
- Change return type of 'get_tx_disable_channel' to match specification in sonic_platform_common/sfp_base.py
- Why I did it
As of Azure/sonic-utilities#1297, subcommands of pcieutil have changed to remove the redundant pcie- prefix. This PR adapts calling applications (pcie-check) to the new syntax.
Resolves#6676
- How I did it
Remove pcie- prefix from pcieutil subcommands in calling applications
Also add pcieutil * to sudoers file, as pcieutil requires elevated permissions
**- Why I did it**
- Add as4630_54pe SDK configuration parameters.
**- How I did it**
- Add l3_alpm_enable=2 and ipv6_lpm_128b_enable=1 in hx5-as4630-48x1G+4x25G+2x100G.bcm.
Co-authored-by: derek_sun <derek_sun@edge-core>
Co-authored-by: derek_sun <ecsonic@edge-core.com>
**- Why I did it**
Reduce the time it takes for the ASIC FW burn as part of the automatic FW upgrade procedure.
**- How I did it**
Add -d option to mlxfwmanager tool to use the faster MST device and not the default one which is not the fastest one.
**- How to verify it**
I manually changed ASIC FW followed by reboot command in order for FW upgrade to take place on deinit.
I manually changed ASIC FW followed by hard reset in order for FW upgrade to take place on init.
Signed-off-by: liora <liora@nvidia.com>
When we add allow-list key with action above route-map gets updated . For eg if we add deny action above template will become to no-export community. Now if we delete the key Issue is we still keep the no-export and do not move back to drop community.
This PR fixes this issue by rolling back default route-map community value back to constants.yml default action.
**Why I did it**
Disable SDK extended dump due to issue found
**How I did it**
Update SAI submodule
**How to verify it**
Verify the SDK extended dump is not called.
Signed-off-by: Eran Dahan <erand@nvidia.com>
* Bump version number to 2.0.32-1 to include a fix for a memory-leak
found during testing. A wrong API is used to free the cJSON
data-structure, which only frees the first pointed-to structure.
The proper API should recursively free all structures.
Signed-off-by: Garrick He <garrick_he@dell.com>
This PR updates the following commits in sonic-platform-common
6ad0004 [component] add auto_update_firmware() to support the auto update. (#106)
49076a9 [sonic_y_cable] Add support for measuring BER and EYE scan and running Loopback, PRBS modes on the Y cable (#158)
6b12b4c [sfp] Add parsing the dom_capability to sff8472 (#102)
7fc76b9 [sonic_pcie] Add get_pcie_aer_stats and its common implementation (#144)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
- Why I did it
SONiC design requires sonic_platform package to be installed in SONiC host environment, not only in docker containers.
- How I did it
For now, sonic_platform python wheel package, that is used by pmon, is provided via device-specific platform modules deb packages that unpacks the wheel package file into specific device's directory on lazy-install.
The PR makes deb packages' postinst script also install these unpacked wheel packages to host.
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
port_config.ini for HWSKU Arista-7050CX3-32S-C32 has missing speed column and duplicated lanes.
The incorrect speed causes issues in Orchagent RESTARTCHECK as the below task remains as the remaining item during swss shutdown.
Update minigraph parser to retrieve kubernetes server info from minigraph.xml and update "KUBERNETES_MASTER|SERVER" in running config.
Update minigraph parser to include clusterName from minigraph.xml into "DEVICE_METADATA|localhost"
snmpd's compile is always failed with file truncated on ARM64 arch, the error log is like "/usr/bin/ld: mibgroup/ip-forward-mib/inetCidrRouteTable/.libs/inetCidrRouteTable_interface.o: file not recognized: file truncated"
Co-authored-by: Xianghong Gu <xgu@centecnetworks.com>
- Why I did it
Fix issue: ptf_nn_agent isn't able to start in syncd-rpc docker on buster.
- How I did it
The issue is fixed by installing python-dev, cffi and nnpy for python 2 explicitly.
- How to verify it
Run copp test on RPC image.
**- Why I did it**
In thermalctd, when speed of fan exceeds threshold, the fan status will be saved as "bad". So in system health, it is better to check fan speed before fan status. In this case, if fan speed exceeds threshold, we get more detailed information.
**- How I did it**
Move fan speed check logic before fan status check
**- How to verify it**
Manual test
Starting with BRCM SAI 4.3.1.5 we see the following :ethtool not fount" error in syslog during boot up:
```
Jan 27 07:36:14.712472 str-s6100-acs-1 INFO syncd#/supervisord: syncd sh: 1:
Jan 27 07:36:14.712844 str-s6100-acs-1 INFO syncd#/supervisord: syncd ethtool: not found
Jan 27 07:36:14.713228 str-s6100-acs-1 INFO syncd#/supervisord: syncd #015
Jan 27 07:36:14.713840 str-s6100-acs-1 INFO syncd#syncd: [0] SAI_API_HOSTIF:_brcm_sai_hostif_speed_set:11894 cmd ethtool -s Ethernet39 speed 40000 rc:32512
Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- setHostIntfsOperStatus: Set operation status DOWN to host interface Ethernet39
Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- initPort: Initialized port Ethernet39
Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- initializePort: Initializing port alias:Ethernet36 pid:1000000000040
Jan 27 07:36:14.726793 str-s6100-acs-1 NOTICE swss#portsyncd: :- onMsg: nlmsg type:16 key:Ethernet36 admin:0 oper:0 addr:4c:76:25:f5:48:80 ifindex:75 master:0
Jan 27 07:36:14.727967 str-s6100-acs-1 NOTICE swss#portsyncd: :- onMsg: Publish Ethernet36(ok) to state db
Jan 27 07:36:14.729331 str-s6100-acs-1 NOTICE swss#orchagent: :- addHostIntfs: Create host interface for port Ethernet36
Jan 27 07:36:14.752398 str-s6100-acs-1 INFO syncd#/supervisord: syncd sh: 1: ethtool: not found#015
Jan 27 07:36:14.752689 str-s6100-acs-1 INFO syncd#syncd: [0] SAI_API_HOSTIF:_brcm_sai_hostif_speed_set:11894 cmd ethtool -s Ethernet36 speed 40000 rc:32512
Jan 27 07:36:14.756050 str-s6100-acs-1 NOTICE swss#orchagent: :- setHostIntfsOperStatus: Set operation status DOWN to host interface Ethernet36
Jan 27 07:36:14.757585 str-s6100-acs-1 NOTICE swss#orchagent: :- initPort: Initialized port Ethernet36
```
It seems that starting with BRCM SAI 4.2.1.5 syncd is using ethtool to set the host interface speed and since this ethtool was not part of the syncd Docker, we observe these "ethtool not found" issue.
This update includes the following changes
> [syncd armhf] Fix syncd crash when running community test suites (#777)
> Revert "[tests]:Add unittest for MACsec on p2p establishment (#771)"
> [tests]:Add unittest for MACsec on p2p establishment (#771)
> [tests] Enable azure pipeline make check to respect unittests (#760)
**- Why I did it**
As per https://pypi.org/project/pip/ pip 21.0 does not not support Python 2 from Jan 2021. Most places in the codebase have already been pinned, but this one was missed.
**- How I did it**
Pin pip2 < version 21 in build_debian.sh
fixesAzure/sonic-utilities#1389
With the recent changes in sudoer files. The show commands fails for the read-only users.
The problem here is the 'docker ps' is failing in the function [get_routing_stack()](8a1109ed30/show/main.py (L54)) therefore all the CLI commands are failing.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
