Update sonic-swss-common submodule pointer to include the following:
* 6e4daf1 Revamp module build script to make it work for 5.15 on Ubuntu 20.04 (sonic-net/sonic-swss-common#720)
* 7f40cde Non recursive automake and Debian packaging changes (sonic-net/sonic-swss-common#700)
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
sonic-slave-stretch build failed for mmh3 version update to 3.10 on Mar 24.
How I did it
Enable reproducible build for vhdx image.
How to verify it
Update sonic-py-common, add missing dependency to redis-dump-load.
This is manually cherry-pick PR for https://github.com/sonic-net/sonic-buildimage/pull/14347
After 202211, the redis-dump-load been patched by sonic, so can't cherry-pick master branch PR to 202211 branch.
#### Why I did it
The script sonic_db_dump_load.py in sonic-py-common is depends on redis-dump-load, however the dependency is missing.
#### How I did it
Add redis-dump-load dependency.
#### How to verify it
Pass all E2E test case.
#### Description for the changelog
Update sonic-py-common, add missing dependency to redis-dump-load.
Why I did it
Fix some of vulnerability issue relative python packages #14269
Pillow: [CVE-2021-27921]
Wheel: [CVE-2022-40898]
lxml: [CVE-2022-2309]
How I did it
How to verify it
Why I did it
SONiC currently does not identify 'EdgeZoneAggregator' neighbor. As a result, the buffer profile attached to those interfaces uses the default cable length which could cause ingress packet drops due to insufficient headroom. Hence, there is a need to update the buffer templates to identify such neighbors and assign the same cable length as used by the T1.
How I did it
Modified the buffer template to identify EdgeZoneAggregator as a neighbor device type and assign it the same cable length as a T1/leaf router.
How to verify it
Unit tests pass, and manually checked on a 7260 to see the changes take effect.
Signed-off-by: dojha <devojha@microsoft.com>
Provide platform-components.json for Clearwater2 and Wolverine
These files are needed for fwutil platform sonic-mgmt tests to pass.
Fix PikeZ platform_components.json
Co-authored-by: Patrick MacArthur <pmacarthur@arista.com>
Co-authored-by: Andy Wong <andywong@arista.com>
- Why I did it
Fixes#14236
When a redis event quickly gets outdated during port breakout, error logs like this are seen
Mar 8 01:43:26.011724 r-leopard-56 INFO ConfigMgmt: Write in DB: {'PORT': {'Ethernet64': {'admin_status': 'down'}, 'Ethernet68': {'admin_status': 'down'}}}
Mar 8 01:43:26.012565 r-leopard-56 INFO ConfigMgmt: Writing in Config DB
Mar 8 01:43:26.013468 r-leopard-56 INFO ConfigMgmt: Write in DB: {'PORT': {'Ethernet64': None, 'Ethernet68': None}, 'INTERFACE': None}
Mar 8 01:43:26.018095 r-leopard-56 NOTICE swss#portmgrd: :- doTask: Configure Ethernet64 admin status to down
Mar 8 01:43:26.018309 r-leopard-56 NOTICE swss#portmgrd: :- doTask: Delete Port: Ethernet64
Mar 8 01:43:26.018641 r-leopard-56 NOTICE lldp#lldpmgrd[32]: :- pops: Miss table key PORT_TABLE:Ethernet64, possibly outdated
Mar 8 01:43:26.018654 r-leopard-56 ERR lldp#lldpmgrd[32]: unknown operation ''
- How I did it
Only log the error when the op is not empty and not one of ("SET" & "DEL" )
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Fixes#11873.
#### Why I did it
When loading from minigraph, for port channels, don't create the members@ array in config_db in the PORTCHANNEL table. This is no longer needed or used.
In addition, when adding a port channel member from the CLI, that member doesn't get added into the members@ array, resulting in a bit of inconsistency. This gets rid of that inconsistency.
Why I did it
Dhcpmon had incorrect RX count for server side packets. It does not raise any false alarms, but could miss catching server side packet count mismatch between snapshot and current counter.
Add debug mode which prints counter to syslog
How I did it
Due to dualtor inbound filter requirement, there are currently two filters, each for listening to rx / tx packets.
Originally, we opened up an rx/tx socket for each interface specified, which causes duplicate socket. Now we initialize the sockets only once. Both sockets are not binded to an interface, and we use vlan to interface mapping to filter packets. For inbound uplinks, we use a portchannel to interface mapping.
Previous dhcpmon counter before dual tor change:
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
[ eth0- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ eth0- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ PortChannel104- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel103- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel102- Current rx/tx] Discover: 0/ 2, Offer: 1/ 0, Request: 0/ 6, ACK: 1/ 0
[ PortChannel101- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ Vlan1000- Current rx/tx] Discover: 1/ 0, Offer: 0/ 1, Request: 3/ 0, ACK: 0/ 1
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
Dhcpmon counter after this PR:
[ PortChannel104- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel103- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel102- Current rx/tx] Discover: 0/ 2, Offer: 1/ 0, Request: 0/ 6, ACK: 1/ 0
[ PortChannel101- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ Vlan1000- Current rx/tx] Discover: 1/ 0, Offer: 0/ 1, Request: 3/ 0, ACK: 0/ 1
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
How to verify it
Ran dhcp relay test to send all four packets in singles and batches on both single ToR and dual ToR. Counter was as expected.
On SONiC VoQ chassis, the speed changes are done from 400G to 100G needs to be supported on 400G linecards.
To enable this, along with speed change the port lanes need to be changed. This PR has the changes to update the port lanes when such speed change happens.
This PR is intended only for VoQ chassis linecards. These platforms today have 400g port with 8 serdes lines, and 100g will operate with 4 serdes lane. When the port speed changes from 400G to 100G the first 4 lanes will be used for 100G port.
Platforms which support 2x50g PAM4 or support 100G PAM4 serdes or other combinations are not handled in the PR.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
#### Why I did it
Remove dialout as critical process as it is no longer used in prod. As part of future work, can remove dialout completely
#### How I did it
Remove from critical process list
- Why I did it
Healthd check system status every 60 seconds. However, running checker may take several seconds. Say checker takes X seconds, healthd takes (60 + X) seconds to finish one iteration. This implementation makes sonic-mgmt test case not so stable because the value X is hard to predict and different among different platforms. This PR introduces an interval
compensation mechanism to healthd main loop.
- How I did it
Introduces an interval compensation mechanism to healthd main loop: healthd should wait (60 - X) seconds for next iteration
- How to verify it
Manual test
Unit test
Why I did it
Add interface-id in dhcpv6-relay yang model
How I did it
Add interface-id option and corresponding UT. Updated configuration.md
How to verify it
kellyyeh@kellyyeh:~/sonic-buildimage/src/sonic-yang-models$ pyang -Vf tree -p /usr/local/share/yang/modules/ietf ./yang-models/sonic-dhcpv6-relay.yang
Why I did it
Find a new bug on kubelet side. The kubernetes-cni plug-in was removed in #12997, the reason is that the plug-in will be auto installed when install kubeadm, and will report error if we don't remove the install code. But after removal, the version auto installed is different from what we installed before. This will affect the kubelet action in some scenarios we don't find before. Need to install it by another way.
How I did it
Install kubernetes-cni==0.8.7-00 before install kubeadm
How to verify it
Flannel binary will be installed under /opt/cni/bin/ folder
Why I did it
Update dynamic threshold to -1 to get optimal performance for RDMA traffic
How I did it
Modified pg_profile_lookup.ini to reflect the correct value
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
This PR addresses the issue mentioned above by loading the acl config as a service on a storage backend device
How I did it
The new acl service is a oneshot service which will start after swss and does some retries to ensure that the SWITCH_CAPABILITY info is present before attempting to load the acl rules. The service is also bound to sonic targets which ensures that it gets restarted during minigraph reload and config reload
How to verify it
Build an image with the following changes and did the following tests
Verified that acl is loaded successfully on a storage backend device after a switch boot up
Verified that acl is loaded successfully on a storage backend ToR after minigraph load and config reload
Verified that acl is not loaded if the device is not a storage backend ToR or the device does not have a DATAACL table
Signed-off-by: Neetha John <nejo@microsoft.com>
- Why I did it
In sfplpm API, the number of logical ports is hardcoded as 64. When a system contains more port than this, the SDK APIs would fail with a syslog as below
Mar 7 03:53:58.105980 r-leopard-58 ERR syncd#SDK: [MGMT_LIB.ERR] Slot [0] Module [0] has logport [0x00010069] in enabled state
Mar 7 03:53:58.105980 r-leopard-58 ERR syncd#SDK: [SDK_MGMT_LIB.ERR] Failed in __sdk_mgmt_phy_module_pwr_attr_set, error: Internal Error
Mar 7 03:53:58.106118 r-leopard-58 ERR pmon#-c: Error occurred when setting power mode for SFP module 0, slot 0, error code 1
- How I did it
Remove the hardcoded value of 64. Obtained the number of logical ports from SDK
- How to verify it
Manual testing
- Why I did it
To include latest fixes:
Fix traffic loss on all routed traffic when moving from 4.4.3372/XX_2008_3388 to 4.5.4118-012/XX_2010_4120-010. Issue occurred after ISSU process in Spectrum 1 only, When upgrading from older version to a new one. Neighbor entries are overwritten.
Fix When using mirror session policer on SPC2/3, the actual CIR was 1.28 times more than the configured CIR value.
Fix Creation of router interface of type bridge may occasionally fail if create is performed immediately after delete.
Fix False errors during SDK deinitialization may be seen in the syslog
- How I did it
Updated SDK submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
- Why I did it
Sometimes Nvidia watchdog device isn't ready when watchdog-control service is up after first installation from ONIE
need to delay watchdog control service to go up after hw-mgmt which gets devices up and ready
- How I did it
Delay Nvidia watchdog-control service before hw-mgmt has started on Mellanox platform in order to avoid missing or not ready watchdog device.
- How to verify it
verification test of ONIE installation of image in a loop
making sure watchdog service is always up (not failed) after first installation from ONIE
fa8b709 Handled the error case of negative age (#57)
990f5b0 Use github code scanning instead of LGTM (#55)
a7992c5 Install libyang for swss-common. (#50)
244fa86 Update README.md
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
Manual cherry-pick of #14045
Why I did it
Fixing issue #13983 Added Missing fields in sonic-portchannel yang model. "fallback" and "fast_rate" fields are present in configuration schema but not in yang model. This leads to traceback when yang is validated
sonic_yang(3):All Keys are not parsed in PORTCHANNEL dict_keys(['PortChannel100'])
sonic_yang(3):exceptionList:["'fast_rate'"]
sonic_yang(3):Data Loading Failed:All Keys are not parsed in PORTCHANNEL dict_keys(['PortChannel100'])
exceptionList:["'fast_rate'"]
Data Loading Failed
All Keys are not parsed in PORTCHANNEL
dict_keys(['PortChannel100'])
exceptionList:["'fast_rate'"]
ConfigMgmt Class creation failed
Failed to break out Port. Error: Failed to load the config. Error: ConfigMgmtDPB Class creation failed
How I did it
Updated yang model
How to verify it
Added tests to verify
