Updating sonic-utilities sub module with the following commits
84dbd93 Clear the fvs vector before popping the message out of notification
a90b2b7 selectabletimer: add mutex to start() and stop()
7ae22be Fix SIGTERM can't terminate PubSub::listen issue
#### Why I did it
To fix hostcfgd can't terminate by sigint issue, need update sonic-swss-common submodule.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
84dbd93 Clear the fvs vector before popping the message out of notification
a90b2b7 selectabletimer: add mutex to start() and stop()
7ae22be Fix SIGTERM can't terminate PubSub::listen issue
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
For yang model, sample_config_db.json file was missing Sample data for the features SNAT/DNAT/IPMC
#### How I did it
Added the SNAT,DNAT,IPMC(low Threshold/high threshold/threshold_type)entries in CRM table.
#### How to verify it
With sanity Build/test only.
[muxorch] Handling optional attributes in muxorch (#2288)
Update netlink messages handler (#2233)
Broadcast Unknown-multicast and Unknown-unicast Storm-control (#1306)
[vstest]: Increase PollingConfig default timeout (#2285)
[FDB] Fix fbdorch to properly handle syncd FDB FLUSH Notif (#2254)
[macsecorch]: Support for non-default sa per sc (#2250)
Migrating the NAT vs tests from Click to direct DB access (#2278)
[neighsync] Ignoring IPv4 link local addresses (#2260)
[IntfMgrd] Retry adding ipv6 prefix by setting disabled_ipv6 flag (#2267)
Increase Redis Timeout value for Switch Create Opration for Packet (#2243)
Update fdborch.cpp (#2261)
Signed-off-by: dprital <drorp@nvidia.com>
- Why I did it
With SAI V.1.10.2, new interface types CR8/SR8/KR8/LR8 have been introduced, we should also support them from the CLI configuration.
- How I did it
Add new enum for the new interface types
- How to verify it
Run the "config interface type" command to verify new interface types can be accepted and handled correctly.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
It is to improve the build performance, when building multiple targets.
The modified time of downloaded files should be not older than the file .platform.
If not, the file will be downloaded again, when building any dependent targets.
How I did it
When downloading the packages from web site, the modified time will be changed by the command "touch".
This reverts commit 15cf9b0d70.
Why I did it
Revert the PR #10775, for it has impact on onie installation.
It is caused by the symbol links not supported in some of the onie unzip.
We will enable after fixing the issue, see #10914
#### Why I did it
To ensure that some internal testcases do not break due to external changes
#### How to verify it
Ran test_cfggen.py with the changes and it passed
- Why I did it
YANG schema is missing for sonic-telemetry
- How I did it
Added YANG schema to sonic-yang-models and appropriate unit tests inside of test and test_config
- How to verify it
Build sonic-yang-models python wheels target and verify that unit tests are passing
What/Why I did:
Issue1: By setting up of ipvlan interface in interface-config.sh we are not tolerant to failures. Reason being interface-config.service is one-shot and do not have restart capability.
Scenario: For example if let's say database service goes in fail state then interface-services also gets failed because of dependency check but later database service gets restart but interface service will remain in stuck state and the ipvlan interface nevers get created.
Solution: Moved all the logic in database service from interface-config service which looks more align logically also since the namespace is created here and all the network setting (sysctl) are happening here.With this if database starts we recreate the interface.
Issue 2: Use of IPVLAN vs MACVLAN
Currently we are using ipvlan mode. However above failure scenario is not handle correctly by ipvlan mode. Once the ipvlan interface is created and ip address assign to it and if we restart interface-config or database (new PR) service Linux Kernel gives error "Error: Address already assigned to an ipvlan device." based on this:https://github.com/torvalds/linux/blob/master/drivers/net/ipvlan/ipvlan_main.c#L978Reason being if we do not do cleanup of ip address assignment (need to be unique for IPVLAN) it remains in Kernel Database and never goes to free pool even though namespace is deleted.
Solution: Considering this hard dependency of unique ip macvlan mode is better for us and since everything is managed by Linux Kernel and no dependency for on user configured IP address.
Issue3: Namespace database Service do not check reachability to Supervisor Redis Chassis Server.
Currently there is no explicit check as we never do Redis PING from namespace to Supervisor Redis Chassis Server. With this check it's possible we will start database and all other docker even though there is no connectivity and will hit the error/failure late in cycle
Solution: Added explicit PING from namespace that will check this reachability.
Issue 4:flushdb give exception when trying to accces Chassis Server DB over Unix Sokcet.
Solution: Handle gracefully via try..except and log the message.
Why I did it
Upgrade FRR to version 8.2.2. Build libyang2 required by FRR.
How I did it
Update FRR version and tag.
How to verify it
Following tests were performed on sonic-vs:
BGP docker status check
BGP configuration and session establishment
Route redistribution and ping
Issued show commands to check the bgp neighbor and routes
Checked app-db to ensure bgp routes are installed with correct interface and nexthop.
Create VRF and check FRR knows the VRF
Check VRF routes are installed in app-db with correct Vrf name and next-hop
Establish BGP Evpn session and check if Evpn routes (multicast, mac, prefix) are exchanged and installed correctly in app-db.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
resolves#10761.
For VOQ chassis, the Recirc port, which was added for the Everflow, stays admin down after load minigraph.
This PR add the fix to make the recirc port as admin up
How I did it
The PR adds a change in minigraph.py, if port has role as Rec make the the port as admin-status up.
How to verify it
UT
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
There is a bug that the Port attributes in CONFIG_DB will be cleared if using sudo config macsec port add Ethernet0 or sudo config macsec port del Ethernet0
How I did it
To fetch the port attributes before set/remove MACsec field in port table.
Signed-off-by: Ze Gan <ganze718@gmail.com>
Why I did it
To further add cable_type and soc_ipv4 field to table MUX_CABLE, this PR tries to parse the minigraph like the following:
```
<Device i:type="SmartCable">
<ElementType>SmartCable</ElementType>
<SubType>active-active</SubType>
<Address xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>192.168.0.3/21</d5p1:IPPrefix>
</Address>
<AddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>::/0</d5p1:IPPrefix>
</AddressV6>
<ManagementAddress xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>0.0.0.0/0</d5p1:IPPrefix>
</ManagementAddress>
<ManagementAddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>::/0</d5p1:IPPrefix>
</ManagementAddressV6>
<SerialNumber i:nil="true" />
<Hostname>svcstr-7050-acs-1-Servers0-SC</Hostname>
</Device>
<Device i:type="Server">
<ElementType>Server</ElementType>
<Address xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>192.168.0.2/21</d5p1:IPPrefix>
</Address>
<AddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>fc02:1000::2/64</d5p1:IPPrefix>
</AddressV6>
<ManagementAddress xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>0.0.0.0/0</d5p1:IPPrefix>
</ManagementAddress>
<Hostname>Servers0</Hostname>
</Device>
```
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
get_mux_cable_entries will try to get the mux cable device from the devices list and get the cable type and soc ip address from the device definition.
How to verify it
Pass the unit-test
Why I did it
add celestica belgite platform
How I did it
add belgite platform in celestica
Co-authored-by: nicwu-cel <nicwu@celestica.com>
Co-authored-by: anjian <anjian@celestica.com>
Co-authored-by: sandycelestica <sandyli@celestica.com>
This update has following changes
Refactor pci topology logic for chassis (fixes some chassis commands and chassisd on linecard)
Introduce new cooling algorithm
Fix linecard poweroff logic when supervisor is going down
Fix linecard status led leading to system-health crashing
Misc fixes
Why I did it
At present, there is no mechanism in an event driven model to know that the system is up with all the essential sonic services and also, all the docker apps are ready along with port ready status to start the network traffic. With the asynchronous architecture of SONiC, we will not be able to verify if the config has been applied all the way down to the HW. But we can get the closest up status of each app and arrive at the system readiness.
How I did it
A new python based system monitor tool is introduced under system-health framework to monitor all the essential system host services including docker wrapper services on an event based model and declare the system is ready. This framework gives provision for docker apps to notify its closest up status. CLIs are provided to fetch the current system status and also service running status and its app ready status along with failure reason if any.
How to verify it
"show system-health sysready-status" click CLI
Syslogs for system ready
Why I did it
It is not necessary to trigger the publish pipeline when build is failed.
How I did it
Remove the condition in the azp task, change to use template condition.
What I did:
Added support to create route-map action set tag <user define value>
when the the allow prefix list matches. The tag can ben define by user in
constants.yml.
Why I did:
Since for Allow List feature we call from base route-map allow-list route-map having set tag option provides way for base route-map to do match tag and take any further action if needed. Adding tag provide metadata that can used by base route-map
- Why I did it
Script fails when there is an exception while reading
- How I did it
Add more logs and checks. Fix wrong variable naming and messages.
- How to verify it
Provoke exception while read_eeprom() and check that it is handled properly
Why I did it
https://github.com/Azure/SONiC/blob/master/doc/vxlan/Overlay%20ECMP%20with%20BFD.md
From the design, need to advertise the route with community string, the PR is to implement this.
How I did it
To use the route-map as the profile for the community string, all advertised routes can be associated with one route-map.
Add one file, mangers_rm.py, which is to add/update/del the route-map. Modified the managers_advertise_rt.py file to associate profile with IP route.
The route-map usage is very flexible, by this PR, we only support one fixed usage to add community string for route to simplify this design.
How to verify it
Implement new unit tests for mangers_rm.py and updated unit test for managers_advertise_rt.py.
Manually verified the test case in the test plan section, will add testcase in sonic-mgmt later. Azure/sonic-mgmt#5581
Why I did it
Config db schema generated by minigraph should run yang validation.
How I did it
Modify run_script to add yang validation.
How to verify it
Run sonic-config-engine unit test.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Support to trigger a pipeline to download and publish artifacts to storage and container registry.
Support to specify the patterns which docker images to upload.
How I did it
Pass the pipeline information and the artifact information by pipeline parameters to the pipeline which will be triggered a new build. It is to decouple the artifacts generation and the publish logic, how and where the artifacts/docker images will be published, depends on the triggered pipeline.
How to verify it
This is part of HLD Azure/SONiC#925
#### Why I did it
Add link-training support
#### How I did it
Update SONiC YANG for port link-training support
#### Description for the changelog
Add "link_training" to sonic-port.yang
#### Link to config_db schema for YANG module changes
https://github.com/sonic-net/SONiC/wiki/Configuration#port
Why I did it
Previous subport unit tests uses port channel names like PortChannel01, so for subport name generated PortChannel01.10, it exceeds Linux network interface name 15 char limit.
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
Modify PortChannel01 to PortChannel1.
- Why I did it
Platform_reboot files for simx doesn't do aything different apart from calling /sbin/reboot. which is anyway done in the /usr/local/bin/reboot script i.e. the parent script which calls the platform specific reboot scripts if present.
Moreover, /sbin/reboot invoked in the platform specific reboot script is a non-blocking call and thus it returns back to the original script (although /sbin/reboot does it job in the background) and we see messages like this.
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Fixes#10793
How I did it
Removed the switch_type validation from the Yang model.
How to verify it
compile sonic_yang_mgmt-1.0-py3-none-any.whl and sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
To include ONIE version in show platform firmware status command output in DellEMC S6100 and Z9332f platforms.
How I did it
Include ‘ONIE’ in the list of components provided by platform APIs in DellEMC S6100 and Z9332f.
Unmount ONIE-BOOT if mounted using fast/soft/warm-reboot plugins in DellEMC S6100.
Why I did it
To upgrade SSD firmware in initramfs while rebooting from SONiC to SONiC and during NOS to SONiC migration.
How I did it
New option 'ssd-upgrader-part’ is introduced in grub command line, to indicate the partition and its filesystem type in which the SSD firmware updater is present. ‘ssd-upgrader-part’ syntax is ssd-upgrader-part=<partition>,<filesystem type>. Example: ssd-upgrader-part=/dev/sda8,ext4
A new initramfs script ‘ssd-upgrade’ is included in init-premount and it invokes the SSD firmware updater (ssd-fw-upgrade) present in the partition indicated by the boot option 'ssd-upgrader-part'
How to verify it
In SONiC, the SSD firmware updater is copied to “/host/” directory.
Fast-reboot is to be initiated with the ‘-u’ option ([scripts/fast-reboot] Add option to include ssd-upgrader-part boot option with SONiC partition sonic-utilities#2150)
After reboot, while booting into SONiC the SSD firmware updater will be executed in initramfs.
288c2d8 Revert "[scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)" (#2161)
bce4694 [autoneg] add support for remote speed advertisement (#2124)
a73f156 [show][vrf]Fixing show vrf to include vlan subinterface (#2158)
7a06457 [auto_ts] Enable register/de-register auto_ts config for APP Extension (#2139)
083ebcc Add transceiver-info items advertised for cmis-supported moddules (#2135)
0811214 Validate destination port is not LAG (#2053)
6ab1c51 [minigraph] Consume golden_config_db.json while loading minigraph (#2140)
c37a957 [Kdump] Remove the duplicate logic if Kdump was disabled (#2128)
1143869 Ordering fix for sfpshow eeprom (#2113)
fdb79b8 Allow fw update for other boot type against on the previous "none" boot fw update (#2040)
a54a091 [GCU] Supressing YANG errors from libyang while sorting (#1991)
fbfa8bc [GCU] Enabling AddRack and adding RemoveRack tests (#2143)
d012be9 [Command-Reference] Add CLI docs for route flow counter (#2069)
8c07d59 [Mellanox] [reboot] [asan] stop asan-enabled containers on reboot (#2107)
697aae3 Fix speed parsing when speed is NOT fetched from APPL_DB (#2138)
22a388b [show] fix get routing stack routine (#2137)
cb3a047 Support option --ports of config qos reload for reloading ports' QoS and buffer configuration to default (#2125)
154a801 Enhance "config interface type/advertised-type" to be blocked on RJ45 ports (#2112)
3732ac5 Add CLI for route flow counter feature (#2031)
29771e7 [techsupport] improve robustness (#2117)
f9dc681 [intfutil] Display RJ45 port and portchannel speed in 'M' instead of 'G' when it's <= 1000M (#2110)
781ae9f [config] Do not enable pfcwd for BmcMgmtToRRouter (#2136)
23e9398 [scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)
576c9ef [scripts/fast-reboot] stop timers in advance (#2131)
4dad79c bugfix: incorrect command for portchannel creation (#2134)
c17b1f4 [show][muxcable] Decrease the timeout for show mux status/hwmode (#2130)
49d61f8 [scripts/fast-reboot] cleanup (#2132)
52ca324 [config/config_mgmt.py]: Fix dpb issue with upper case mac in (#2066)
9e2fbf4 Update db_migrator to support `pfcwd_sw_enable` (#2087)
4010bd0 FGNHG CLI changes (#1588)
6bd54d0 Fix 'show mac' output when FDB entry for default vlan is None instead of 1 (#2126)
Fixes#9279
- Why I did it
Part of larger effort to move all SONiC systems to bullseye
- How I did it
1. Update container makefiles with correct dependencies
2. Update container Dockerfile with correct base image
3. Update container Dockerfile with correct apt dependencies
4. Update any other makefiles with dependencies to remove python2 support
5. Minor changes to support bullseye / python3
- How to verify it
Run regression on the switch:
1. Verify PTF community tests work
2. Verify syncd runs and all ports come up / pass traffic
3. Verify all platform tests succeed
