Why I did it
ASN range is from 1 to 4294967295, need to remove invalid ASN.
How I did it
Update unit test and replace ASN 0.
How to verify it
Run unit test for sonic-config-engine.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
sonic-config-engine unit test is using invalid switch_type
How I did it
Update xml with correct switch_type
How to verify it
Run UT for sonic-config-engine
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Need to run yang validation for sonic-cfggen unit test, and many unit test does not provide lanes for port table.
How I did it
Update port config file.
How to verify it
Run sonic-cfggen unit test,
Use below PR to verify
#10228
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated by minigraph can’t pass yang validation, deployment_id can’t be none for yang validation.
How I did it
Update minigraph.py, skip deployment_id with None value
How to verify it
Run UT for sonic-config-enginue.
Run command 'sonic-cfggen -m tests/multi_npu_data/sample-minigraph-noportchannel.xml -p tests/multi_npu_data/sample_port_config-3.ini -n asic3 --print-data'.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Multi-asic platform add aisc_port_name and role to PORT table, and port_index range is changed.
How I did it
Update sonic-port.yang, add asic_port_name and role, and remove range limitation.
How to verify it
Run UT for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
end2end test is blocked by Yang model for BGP_PEER_RANGE.
How I did it
Add new yang models.
How to verify it
Run UT for sonc-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
Signed-off-by: Gang Lv ganglv@microsoft.com
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
end2end test is blocked by Yang model for AAA login pattern.
#### How I did it
Add pattern to AAA yang models.
#### How to verify it
Run UT for sonc-yang-models.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
Fix#9713
#### A picture of a cute animal (not mandatory but encouraged)
* Ported platform from master
Signed-off-by: Petro Bratash <petrox.bratash@intel.com>
* [BFN] Updated x86_64-accton_as9516_32d-r0/platform.json
* [BFN] Refactoring and adding some functions of Thermal class (set and
get thresholds and etc.)
* [BFN] Fix exception when fwutil run without sudo
* Revert "[BFN] syncd-rpc build with thrift 0.14.1 (#9884)"
This reverts commit bec35267cb.
* [BFN] Updated SDK to 20220127_sai_1.9.1 (#9870)
Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com>
* [BFN] updated SDE packages for BFN platforms (#10512)
Updated SDE packages for bfn platform
- introduced X6 profile
- fixes for drop counters
- fixes for platform part
Co-authored-by: Andriy Kokhan <AndriyX.Kokhan@intel.com>
Co-authored-by: roman_savchuk <romanx.savchuk@intel.com>
* Bump Thrift version from 0.13.0 to 0.14.1 (#9881)
#### Why I did it
To bump the Thrift version to 0.14.1
- To avoid [CVE-2020-13949](https://nvd.nist.gov/vuln/detail/CVE-2020-13949)
- to fix some dependencies issues
#### How I did it
- rename `src/thrfit_0_13_0` to `src/thrift_2` to remove version number in the path. (`src/thrift` contains rules to build thrift 0.11.0 )
- Add thrift sources as submodule as there are no prepared debian packages for version >0.13.0 on [debian.org](https://packages.debian.org/search?searchon=sourcenames&keywords=thrift)
- Added patches with fixes for original thrift debian rules:(remove unneeded packages, fix multi job build)
#### How to verify it
```
BLDENV=buster make -f Makefile.work target/debs/buster/libthrift-dev_0.14.1_amd64.deb
```
* Correct thrift 0141 typo fix (#10199)
Correct libsaithrift dependency package name from
LIBTHRIFT_DEV_0_14_1 THRIFT_COMPILER_0_14_1 to
LIBTHRIFT_0_14_1_DEV THRIFT_0_14_1_COMPILER
How I did it
How to verify it
Test Done:
make BLDENV=buster SAITHRIFT_V2=y -f Makefile.work target/debs/buster/saiserverv2_0.9.4_amd64.deb
Co-authored-by: Myron Sosyak <myronx.sosyak@intel.com>
89d0e92 (HEAD -> 202111, origin/202111) [scripts/fast-reboot] cleanup (#2132)
e0baa93 [config/config_mgmt.py]: Fix dpb issue with upper case mac in (#2066)
2135269 (HEAD -> 202111, origin/202111) [SSD]Enhance ssd_generic with more error handling to avoid python crash #271
393fbee [SSD Generic] Add support for parsing nvme ssd model, health and temperature (#265)
b67d479 Fixed the sfp refactor issue
827c5a6 Added nokia_cmd command nokia_common grpc support for power down/up SFM module
aeb7f56 Added the nokia cli commands for midplane
c57d083 Fix the get_my_module issue and the thermal_infos exception issue.
0536293 Change the output of "show chassis module status"
63212d7 Enhance the help display for nokia_cmd command
e8d2599 Fix the sonic_install_ndk_service script issue
d52bdcf Add command nokia_cmd show sfm-eeprom support
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
Running warm-reboot in a loop for 500 times leads to this error on 318-th iteration:
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors Traceback (most recent call last):
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors File "/usr/bin/restore_neighbors.py", line 24, in <module>
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors from scapy.all import conf, in6_getnsma, inet_pton, inet_ntop, in6_getnsmac, get_if_hwaddr, Ether, ARP, IPv6, ICMPv6ND_NS, ICMPv6NDOptSrcLLAddr
Apr 2 15:56:27.346795 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/all.py", line 25, in <module>
Apr 2 15:56:27.346956 sonic INFO swss#/supervisord: restore_neighbors from scapy.route import *
Apr 2 15:56:27.346995 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/route.py", line 205, in <module>
Apr 2 15:56:27.347089 sonic INFO swss#/supervisord: restore_neighbors conf.iface = get_working_if()
Apr 2 15:56:27.347129 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/linux.py", line 128, in get_working_if
Apr 2 15:56:27.347213 sonic INFO swss#/supervisord: restore_neighbors ifflags = struct.unpack("16xH14x", get_if(i, SIOCGIFFLAGS))[0]
Apr 2 15:56:27.347250 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/common.py", line 31, in get_if
Apr 2 15:56:27.347345 sonic INFO swss#/supervisord: restore_neighbors return ioctl(sck, cmd, struct.pack("16s16x", iff.encode("utf8")))
Apr 2 15:56:27.347365 sonic INFO swss#/supervisord: restore_neighbors OSError: [Errno 19] No such device
The issue was reported to scapy devs secdev/scapy#3369, the fix is secdev/scapy#3371, however there is no released scapy version with this fix right now, thus decided to build scapy v2.4.5 from sources and apply the fix in a form of a patch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
Fixes#9628
During bootup, this error log is seen
Dec 22 04:26:29 sonic interfaces-config.sh[2546]: error: main exception: cannot find interfaces: eth0 (interface was probably never up ?)
This is of non-functional nature and doesn't affect the flow.
- How I did it
Dont take the ifdown if not needed
- How to verify it
Verified during reboot. Log did not appear and IP was acquired on eth0 as expected
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Cherry-pick #10108
- Why I did it
Fixing issue #9991
The ACL RULE table field ETHER_TYPE can accept both hex as well as decimal values. However yang model didn't allow decimal values. Fixed it to allow decimal values (same pattern as in hex (1536-65535)
- How I did it
Updated yang model to handle decimal values
- How to verify it
Added UT to verify it.
bd97dfe Fix urllib3 CVE-2021-33503 issue (#104)
f159bfa Upgrade the containers to be based on Debian Buster (#103)
a1830c1 Fix OpenAPI spec to be readable by autorest (#101)
94805a3 Identify and report Vnet GUID for conflicting VNI (#99)
4832dfd Static route expiry if not specified as persistent (#98)
5cc4358 Add support for overlay ECMP (#96)
6822a46 [CI] Set diff cover threshold to 50% (#97)
dcc826a Add PR diff coverage (#95)
This PR is to backport #10401 to 202111
- Why I did it
Take new hw-mgmt release to SONiC, including:
new features:
hw-mgmt: add to PSU FW upgrade tool command to show current FW version
hw-mgmt: add to PSU FW upgrade tool support for single-PSU-in-the-system FW upgrade
hw-mgmt: add attribute “/firmware” to show FW version of restricted upgradable PSUs only
hw-mgmt: Add NVME temperature reports attributes (_alarm/_crit/_min/_max)
bug fix:
psu: redundant i2c_addr attributes being created for psu 3 & 4 in system having only 2 psus.
hw-mgmt: in SPC1/2 i2c driver removal is too slow vs. ASIC reset causing non-functional log errors
PSU thresholds sysfs changed in 5.10 to “read only” preventing modification (modification required due PSU HW bug)
CPLD3 sysfs attribute missing after chip down/up flow
sysfs attributes missing when hw-mgmt is restarted (stop/start) within systemd
release notes can be found from link https://github.com/Mellanox/hw-mgmt/blob/V.7.0020.2004/debian/Release.txt
- How I did it
Update hw-mgmt make file with new version number
Update hw-mgmt submodule pointer
- How to verify it
Run platform regression on all Mellanox platform
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
Exclude the innovium build in upgrading version build, currently, the builds are always failed, exclude the build temporarily.
Increase the broadcom build timeout.
- Why I did it
Fastboot will delay all counters in CONFIG DB, it relies on enable_counters.py to recover the delayed counters. However, enable_counters.py does not recover those non-default counters.
- How I did it
For non-default counters, if it is in CONFIG DB, put delay status to false after the waiting.
- How to verify it
Manual test
c5c105f (HEAD -> 202111, origin/202111) [PBH] Implement Edit Flows (#2093)
7050581 [techsupport] Handle minor fixes of TS Lock and update auto-TS (#2114)
3602f99 Fix issues in clear_qos (#2122)
4f96d3b Fixing get port speed when oper status is down (#2123)
5bb99c7 Validate LAG has members before mirror session create (#2130)
ec6c8af [vxlan] Remove tunnel map objects on VNET tunnel removal (#2150)
7e7db19 [BFD]Registering BFD state change callback during session creation (#2202)
618fe07 [VNET]Fixing nexthop group delete during route change (#2198)
91b66df [portsorch]: Prevent LAG member configuration when port has active ACL binding (#2165)
29de9d0 Remove redundant and problematic code to skip "pool" field in buffer profile handling (#2197)
ded0b45 [PBH] Implement Edit Flows (#2169)
2ee0f49 [neighsyncd] increase neighsyncd timeout (#2209)
a0160c0 [QosOrch] The notifications cannot be drained in QosOrch in case the first one needs to retry (#2206)
Fix the generating version file failure issue caused by artifacts folder change.
When changing to use the same template for PR build, official build and packages version upgrade, the artifacts folder adding a "target" folder, the version upgrade task should be changed accordingly.
Why I did it
docker hub will limit the pull rate.
Use ACR instead to pull debian related docker image.
How I did it
Set DEFAULT_CONTAINER_REGISTRY in pipeline.
* [Marvell] Update armhf SAI deb version 1.9.1 (#9865)
Move marvell armhf SAI deb to 1.9.1 to address build failures.
Signed-off-by: Rajkumar Pennadam Ramamoorthy <rpennadamram@marvell.com>
* [Marvell] Update armhf driver/sai deb version (#10126)
Fixed Marvell SAI deb version naming issue reported in Marvell-switching/sonic-marvell-binaries#62
Signed-off-by: Rajkumar Pennadam Ramamoorthy <rpennadamram@marvell.com>
* [Build]: only install grpc in amd64 (#10212)
[Build]: only install grpc in amd64
Unblock marvell-armhf build.
Co-authored-by: Rajkumar-Marvell <54936542+rajkumar38@users.noreply.github.com>
Why I did it
Cherry-pick commits from master to 202111 to fix build broken issue.
See detail in the commits.
Why I did it
Fix host image debian package version issue.
The package dependencies may have issue, when some of debian packages of the base image are upgraded. For example, libc is installed in base image, but if the mirror has new version, when running "apt-get upgrade", the package will be upgraded unexpected. To avoid such issue, need to add the versions when building the host image.
How I did it
The package versions of host-image should contain host-base-image.
#### Why I did it
when adding and removing ports after init stage we saw two issues:
first:
In several cases, after removing a port, lldpmgr is continuing to try to add a port to lldp with lldpcli command. the execution of this command is continuing to fail since the port is not existing anymore.
second:
after adding a port, we sometimes see this warning messgae:
"Command failed 'lldpcli configure ports Ethernet18 lldp portidsubtype local etp5b': 2021-07-27T14:16:54 [WARN/lldpctl] cannot find port Ethernet18"
we added these changes in order to solve it.
#### How I did it
port create events are taken from app db only.
lldpcli command is executed only when linux port is up.
when delete port event is received we remove this command from pending_cmds dictionary
#### How to verify it
manual tests and running lldp tests
#### Description for the changelog
Dynamic port configuration - solve lldp issues when adding/removing ports
Why I did it
Kernel hang in during early boot is caused due overwriting of device tree with uncompressing kernel. Added the fdt_high which gives a safe offset from kernel location.
How I did it
Setting uboot environment variable fdt_high.
How to verify it
Successful boot of bullseye kernel on Marvell Armada 380/385.
Change-Id: I3e2521780f5ecdb3bdf6cbb6542250814ca11959
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
Why I did it
Removing incorrect check in plt setup for fw_env config: This check was added before to compare 2 different types of disk. Now the check is redundant and check is not required as transition is complete.
2)Removing legacy_volume_label in create_partition: legacy_volume_label is not used in armhf install files. With legacy_volume_label initialized to NULL, current code will always return true for check, if demo_part exits.
How I did it
Change is about removing the redundant/incorrect code explained above.
How to verify it
uboot fw_printenv and fw_setenv is tested
onie-nos-install has be verified.
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
For Bullseye, Python 2 isn't present at all. This means that in certain
build cases (such as building something only for Bullseye), the version
file may not exist, and so the sort command would fail.
For most normal build commands, this probably won't be an issue, because
the SONiC build will start with Buster (which has both Python 2 and
Python 3 wheels built), and so the py2 and py3 files will be present
even during the Bullseye builds.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
