Ignore intermittent IO errors during get_change_event in the Platform API
Fix tunings for some ports on CatalinaDD
Fix kernel module build for 6.1 kernel in preparation of bookworm upgrade
Why I did it
System health config is missing in few Dell platforms.
How I did it
Added system health monitoring config and its related API's
How to verify it
show system-health summary/detail commands.
Why I did it
Add PDDF support on following Ufispace platforms with Broadcom ASIC
S9110-32X
S8901-54XC
S7801-54XS
S6301-56ST
How I did it
Add PDDF configuration files, scripts and python files
How to verify it
Run pddf commands and show commands.
Signed-off-by: nonodark <ef67891@yahoo.com.tw>
Why I did it
Updating the iSMART_64 tool for supporting latest debian releases.
How I did it
On branch new_ismart
Changes to be committed:
(use "git restore --staged ..." to unstage)
modified: platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iSMART_64
How to verify it
In s6100, run the iSMART_64 tool.
md5sum - 24725730d7649769c7ba50971c1f2955
Why I did it
[E1031] fix pca9548 initializes failed occasionally in stress test.
When failure happened, ismt i2c bus hang up and need power cycle to
recover it.
How I did it
Add 0.5s delay between setuping and configuring pca9548 i2c mux.
How to verify it
Reboot stress test at least 100 times without failure.
Why I did it
To fixsonic-net/sonic-mgmt#8786
How I did it
Modified Fan API to check whether the data retrieved is valid or not and return accordingly
How to verify it
Verify whether API 2.0 is loaded properly or not.
Execute CLI's like "show version", "show interface status", "show platform psustatus" etc..
Why I did it
To support dynamic swapping of module types/speeds (400G/100G/40G)
To optimize CMIS ZR optics operation
How I did it
Reinitialize xcvr_api at module removal/insertion time, and also optimize cache for ZR optics.
How to verify it
Verify that different (supported) module types can be dynamically swapped (removed/inserted) and that each is properly provisioned by Xcvrd and has its EEPROM information accurately reported in Redis DB (using "show transceiver eeprom") as well as "sfputil show eeprom" direct access.
Also verify that Xcvrd initialization and operation with 400G CMIS ZR optics is both efficient and functional.
** edit 6/14/23: pushed enhanced caching (full memory map) support and elimination of base class APIs override.
Why I did it
FPGA driver crash was observed in Dell FPGA based platforms.
How I did it
Fixed FPGA crash
How to verify it
Load FPGA driver and check whether the kernel crashes.
Why I did it
ptf_nn_agent failed to start in dnx rpc syncd because module afpacket was not installed.
Please see issue sonic-net/sonic-mgmt#7822
How I did it
Add downloading ptf afpacket module in docker file.
How to verify it
Verified that ptf_nn_agent was started successfully in dnx rpc syncd with the change.
Fix lpmode on 7060DX5-32
Fix psu led issue on 7060DX5-64
Use sonic_xcvr lpmode if platform does not support hw lpmode
Add chassis cooling algorithm
Change cooling algorithm default interval to 10s
Force filesystem sync on linecard reboot
- Fix watchdog reboot cause for wolverine linecard
- Fix PSU fan speed of 0% by adding max RPM to most psu descriptions
- Add product DCS-7060DX5-64
- Add product DCS-7060DX5-32
Why I did it
Update sonic-platform submodule for Nokia-7250IXRE Platform. This requires the new NDK 22.9.8 and above
How I did it
Update submodule sonic-platform for Nokia-7250IXRE platform.
c9f316e Disparate process and thread-safe protection for MDIPC transport, and refactored presence logic to better align with SfpStateUpdateTask operation
a3486cc Added _get_module_bulk_info() and cache the info for 5 seconds to optimize the chassisd update.
4b2e729 Fixed the nokia_cmd show qfpga help display
7b87049 Fixed the nokia_cmd show midplane helper dispaly.
83eabea Add "nokia_cmd set ndk-monitor-action" and "nokia_cmd set ndk-log-level" commands
8aad7de Add nokia_cmd show ndk-version
d2c55e3 Modify the psu.py and module.py to optimize the psud running time
Signed-off-by: mlok <marty.lok@nokia.com>
[S6100] Improve S6100 serial-getty monitor, wait and re-check when getty not running to avoid false alert.
#### Why I did it
On S6100, the serial-getty service some time can't auto-restart by systemd. So there is a monit unit to check serial-getty service status and restart it.
However, this monit will report false alert, because in most case when serial-getty not running, systemd can restart it successfully.
To avoid the false alert, improve the monitor to wait and re-check.
Steps to reproduce this issue:
1. User login to device via console, and keep the connection.
2. User login to device via SSH, check the serial-getty@ttyS1.service service, it's running.
3. Run 'monit reload' from SSH connection.
4. Check syslog 1 minutes later, there will be false alert: ' 'serial-getty' process is not running'
#### How I did it
Add check-getty.sh script to recheck again later when getty service not running.
And update monit unit to check serial-getty service status with this script to avoid false alert.
#### How to verify it
Pass all UT.
Manually check fixed code work correctly:
```
admin@***:~$ sudo systemctl stop serial-getty@ttyS1.service
admin@***:~$ sudo /usr/local/bin/check-getty.sh
admin@***:~$ echo $?
1
admin@***:~$ sudo systemctl status serial-getty@ttyS1.service
● serial-getty@ttyS1.service - Serial Getty on ttyS1
Loaded: loaded (/lib/systemd/system/serial-getty@.service; enabled-runtime; vendor preset: enabled)
Active: inactive (dead) since Tue 2023-03-28 07:15:21 UTC; 1min 13s ago
admin@***:~$ sudo /usr/local/bin/check-getty.sh
admin@***:~$ echo $?
0
admin@***:~$ sudo systemctl status serial-getty@ttyS1.service
● serial-getty@ttyS1.service - Serial Getty on ttyS1
Loaded: loaded (/lib/systemd/system/serial-getty@.service; enabled-runtime; vendor preset: enabled)
```
syslog:
```
Mar 28 07:10:37.597458 *** INFO systemd[1]: serial-getty@ttyS1.service: Succeeded.
Mar 28 07:12:43.010550 *** ERR monit[593]: 'serial-getty' status failed (1) -- no output
Mar 28 07:12:43.010744 *** INFO monit[593]: 'serial-getty' trying to restart
Mar 28 07:12:43.010846 *** INFO monit[593]: 'serial-getty' stop: '/bin/systemctl stop serial-getty@ttyS1.service'
Mar 28 07:12:43.132172 *** INFO monit[593]: 'serial-getty' start: '/bin/systemctl start serial-getty@ttyS1.service'
Mar 28 07:13:43.286276 *** INFO monit[593]: 'serial-getty' status succeeded (0) -- no output
```
#### Description for the changelog
[S6100] Improve S6100 serial-getty monitor.
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
Why I did it
There is rare condition, emc2305 hold SMBus and cause SMBus completion wait timed out.
How I did it
Enable EMC2305 SMBus timeout feature, 30ms period of inactivity will reset the interface.
How to verify it
Use 'i2cget -y -f 23 0x4d 0x20 b' to read EMC2305 configuration register and check DIS_TO bit not set.
Signed-off-by: Eric Zhu <erzhu@celestica.com>
Why I did it
To enable FPGA support in PDDF.
How I did it
Added FPGAI2C and FPGAPCI in the build path for the PDDF debian package
Added the support for FPGA access APIs in the drivers of fan, xcvr, led etc.
Added the FPGA device creation support in PDDF utils and parsers
How to verify it
These changes can be verified on some platform using such FPGAs. For testing purpose, we took Dell S5232f platform and brought it up using PDDF. In doing so, FPGA devices are created using PDDF and optics eeproms were accessed using common FPGA drivers. Below are some of the logs.
Why I did it
Upgrade SAI XGS version to 8.4.0.2 and migrate to DMZ repo.
How I did it
Update SAI XGS version in sai.mk.
How to verify it
Run the SONiC and SAI test with the SAI pipeline.
Signed-off-by: zitingguo-ms zitingguo@microsoft.com
Why I did it
Platform cases test_tx_disable, test_tx_disable_channel, test_power_override failed in dx010.
How I did it
Add i2c access algorithm for CPLD i2c adapters.
How to verify it
Verify it with platform_tests/api/test_sfp.py::TestSfpApi test cases.
d768d19 Remove warning msg when a transceiver op takes > 200ms
7451689 Support the module.py in IMM to query the Supervisor card eeprom info
Signed-off-by: mlok <marty.lok@nokia.com>
add SEU reporting on chassis
fix fallback logic for Clearlake eeprom identification
fix fan speed reporting for a specific model
move pcie timeout configuration for Upperlake in platform code (deprecates hwsku-init)
Why I did it
Update Nokia sonic-platform submodule
81a9c77 [Supervisor] Modifed the get_description to fix the name for Nokia-IXR7250E-SUP-10 card.
e49ddfb Fix the LedContorlCommon to get the physical index from port mapping
dd143f1 [module] modify the chassis.py and module.py to allow supervisor to retrieve the line card eemprom info
How I did it
Update Nokia sonic-platform submodule
81a9c77 [Supervisor] Modifed the get_description to fix the name for Nokia-IXR7250E-SUP-10 card.
e49ddfb Fix the LedContorlCommon to get the physical index from port mapping
dd143f1 [module] modify the chassis.py and module.py to allow supervisor to retrieve the line card eemprom info
How to verify it
On supervisor, "show chassis module status" should show Nokia-IXR7250E-SUP-10 instead of Nokia-IXR7250-SUP-10
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
[Seastone] Enhancement fix for PR12200 syseeprom issue.
How I did it
Enhance the fix through replace the hardcoded devnum to bash variable
How to verify it
show platform syseeprom or decode-syseeprom
Why I did it
Ragile adapter ra-b6510-32c ra-b6510-48v8c ra-b6910-64c ra-b6920-4s to kernel 5.x
Signed-off-by: “pettershao” pettershao@ragilenetworks.com
Why I did it
why
In order to apply different config across different platform, and use the code with a unified format, reuse syncd init script to init saiserver.
How I did it
how
Reuse syncd init script
How to verify it
Test
Test in DUT s6000 and dx010 with sonic 202205
- Why I did it
Support syslog rate limit configuration feature
- How I did it
Remove unused rsyslog.conf from containers
Modify docker startup script to generate rsyslog.conf from template files
Add metadata/init data for syslog rate limit configuration
- How to verify it
Manual test
New sonic-mgmt regression cases
Why I did it
Add two platform that support s3IP framework
How I did it
Add two platforms supporting S3IP SYSFS (TCS8400, TCS9400)
How to verify it
Manual test
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
Why I did it
How I did it
How to verify it
* 03.Version-cache - framework environment settings
It defines and passes the necessary version cache environment variables
to the caching framework.
It adds the utils script for shared cache file access.
It also adds the post-cleanup logic for cleaning the unwanted files from
the docker/image after the version cache creation.
* 04.Version cache - debug framework
Added DBGOPT Make variable to enable the cache framework
scripts in trace mode. This option takes the part name of the script to
enable the particular shell script in trace mode.
Multiple shell script names can also be given.
Eg: make DBGOPT="image|docker"
Added verbose mode to dump the version merge details during
build/dry-run mode.
Eg: scripts/versions_manager.py freeze -v \
'dryrun|cmod=docker-swss|cfile=versions-deb|cname=all|stage=sub|stage=add'
* 05.Version cache - docker dpkg caching support
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
Signed-off-by: maipbui <maibui@microsoft.com>
Dependency: [PR (#12065)](https://github.com/sonic-net/sonic-buildimage/pull/12065) needs to merge first.
#### Why I did it
1. `eval()` - not secure against maliciously constructed input, can be dangerous if used to evaluate dynamic content. This may be a code injection vulnerability.
2. `subprocess()` - when using with `shell=True` is dangerous. Using subprocess function without a static string can lead to command injection.
3. `os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content.
4. `is` operator - string comparison should not be used with reference equality.
5. `globals()` - extremely dangerous because it may allow an attacker to execute arbitrary code on the system
#### How I did it
1. `eval()` - use `literal_eval()`
2. `subprocess()` - use `shell=False` instead. use an array string. Ref: [https://semgrep.dev/docs/cheat-sheets/python-command-injection/#mitigation](https://semgrep.dev/docs/cheat-sheets/python-command-injection/#mitigation)
3. `os` - use with `subprocess`
4. `is` - replace by `==` operator for value equality
5. `globals()` - avoid the use of globals()
*Replaced BRCM SDK's psample support flag(PSAMPLE_SUPPORT) with linux kernel psample module support config flag(CONFIG_PSAMPLE) in saibcm-modules.
*Replaced BUILD_PSAMPLE conditioanl check with CONFIG_PSAMPLE to build psample callback library(psample-cb.o), only if psample config is enabled in linux kernel.
*Cleaned up PSAMPLE_SUPPORT related commented code.
Signed-off-by: haris@celestica.com
Signed-off-by: haris@celestica.com
1d53bf4 Skip platform NDK health check two times in watchdog.sh
d68297c Added code to shutdown the channel after the grpc call also fixed the show fp-status command
0769efe Impelemented the module API to return the correct eeprom info for fabric card.
171569c Remove explicit logger identifier for transceiver module operations; use inherited id
6c4d651 Corrected the log messages for firmware install
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
smartctl tool is available only in PMON docker. Hence, the tool may be not accessible incase PMON docker goes down.
Using iSMART_64 tool to fetch the SSD firmware version and device model information.
How I did it
Replacing smartctl with iSMART_64.
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
The [xml.etree.ElementTree](https://docs.python.org/3/library/xml.etree.elementtree.html#module-xml.etree.ElementTree) module is not secure against maliciously constructed data.
`os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content
`subprocess.getstatusoutput` is dangerous because include shell=True in the implementation
#### How I did it
Remove xml. Use [lxml](https://pypi.org/project/lxml/) XML parsers package that prevent potentially malicious operation.
Replace `os` by `subprocess`
Use command as an array instead of string
Use `getstatusoutput_noshell` in `sonic_py_common` lib
