f0dfe36953
Verify that /etc/apt/sources.list points to buster using docker exec bgp cat /etc/apt/sources.list BGP neighborship is established. root@sonic:~# show ip bgp summary IPv4 Unicast Summary: BGP router identifier 10.1.0.1, local AS number 65100 vrf-id 0 BGP table version 1 RIB entries 1, using 184 bytes of memory Peers 1, using 20 KiB of memory Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 6.1.1.1 4 100 96 96 0 0 0 01:32:04 0 Total number of neighbors 1 root@sonic:~# Signed-off-by: Joyas Joseph <joyas_joseph@dell.com>
447 lines
14 KiB
Django/Jinja
447 lines
14 KiB
Django/Jinja
{%- if CONFIGURED_ARCH == "armhf" %}
|
||
FROM multiarch/debian-debootstrap:armhf-stretch
|
||
{%- elif CONFIGURED_ARCH == "arm64" %}
|
||
FROM multiarch/debian-debootstrap:arm64-stretch
|
||
{%- else -%}
|
||
FROM debian:stretch
|
||
{%- endif %}
|
||
|
||
MAINTAINER gulv@microsoft.com
|
||
|
||
COPY ["no-check-valid-until", "/etc/apt/apt.conf.d/"]
|
||
|
||
RUN echo "deb [arch=amd64] http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb-src [arch=amd64] http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb [arch=amd64] http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb-src [arch=amd64] http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb [arch=amd64] http://debian-archive.trafficmanager.net/debian stretch-backports main" >> /etc/apt/sources.list
|
||
|
||
{%- if CONFIGURED_ARCH == "armhf" %}
|
||
RUN echo "deb [arch=armhf] http://deb.debian.org/debian stretch main contrib non-free" > /etc/apt/sources.list && \
|
||
echo "deb-src [arch=armhf] http://deb.debian.org/debian stretch main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb [arch=armhf] http://deb.debian.org/debian stretch-updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb-src [arch=armhf] http://deb.debian.org/debian stretch-updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb [arch=armhf] http://security.debian.org stretch/updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb-src [arch=armhf] http://security.debian.org stretch/updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo 'deb [arch=armhf] http://ftp.debian.org/debian stretch-backports main' >> /etc/apt/sources.list
|
||
{%- elif CONFIGURED_ARCH == "arm64" %}
|
||
RUN echo "deb [arch=arm64] http://deb.debian.org/debian stretch main contrib non-free" > /etc/apt/sources.list && \
|
||
echo "deb-src [arch=arm64] http://deb.debian.org/debian stretch main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb [arch=arm64] http://deb.debian.org/debian stretch-updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb-src [arch=arm64] http://deb.debian.org/debian stretch-updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb [arch=arm64] http://security.debian.org stretch/updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo "deb-src [arch=arm64] http://security.debian.org stretch/updates main contrib non-free" >> /etc/apt/sources.list && \
|
||
echo 'deb [arch=arm64] http://ftp.debian.org/debian stretch-backports main' >> /etc/apt/sources.list
|
||
{%- endif %}
|
||
|
||
## Make apt-get non-interactive
|
||
ENV DEBIAN_FRONTEND=noninteractive
|
||
|
||
RUN apt-get update && apt-get install -y \
|
||
apt-utils \
|
||
default-jre-headless \
|
||
openssh-server \
|
||
curl \
|
||
wget \
|
||
unzip \
|
||
git \
|
||
build-essential \
|
||
libtool \
|
||
lintian \
|
||
sudo \
|
||
dh-make \
|
||
dh-exec \
|
||
kmod \
|
||
libtinyxml2-4 \
|
||
libboost-program-options1.62-dev \
|
||
libtinyxml2-dev \
|
||
python \
|
||
python-pip \
|
||
libncurses5-dev \
|
||
texinfo \
|
||
dh-autoreconf \
|
||
python3-pip \
|
||
doxygen \
|
||
devscripts \
|
||
git-buildpackage \
|
||
perl-modules \
|
||
libswitch-perl \
|
||
dh-systemd \
|
||
# For quagga build
|
||
libreadline-dev \
|
||
texlive-latex-base \
|
||
texlive-generic-recommended \
|
||
texlive-fonts-recommended \
|
||
libpam0g-dev \
|
||
libpam-dev \
|
||
libcap-dev \
|
||
imagemagick \
|
||
ghostscript \
|
||
groff \
|
||
libpcre3-dev \
|
||
gawk \
|
||
chrpath \
|
||
# For frr build
|
||
libc-ares-dev \
|
||
libsnmp-dev \
|
||
libjson-c3 \
|
||
libjson-c-dev \
|
||
libsystemd-dev \
|
||
python-ipaddr \
|
||
libcmocka-dev \
|
||
python3-all-dev \
|
||
python3-all-dbg \
|
||
install-info \
|
||
logrotate \
|
||
# For libnl3 (local) build
|
||
cdbs \
|
||
# For SAI meta build
|
||
libxml-simple-perl \
|
||
graphviz \
|
||
aspell \
|
||
# For linux build
|
||
bc \
|
||
fakeroot \
|
||
build-essential \
|
||
devscripts \
|
||
quilt \
|
||
stgit \
|
||
# For platform-modules build
|
||
module-assistant \
|
||
# For thrift build\
|
||
gem2deb \
|
||
libboost-all-dev \
|
||
libevent-dev \
|
||
libglib2.0-dev \
|
||
libqt4-dev \
|
||
python-all-dev \
|
||
python-twisted \
|
||
phpunit \
|
||
libbit-vector-perl \
|
||
openjdk-8-jdk \
|
||
javahelper \
|
||
maven-debian-helper \
|
||
ant \
|
||
libmaven-ant-tasks-java \
|
||
libhttpclient-java \
|
||
libslf4j-java \
|
||
libservlet3.1-java \
|
||
qt5-default \
|
||
pkg-php-tools \
|
||
# For mellanox sdk build
|
||
libpcre3 \
|
||
libpcre3-dev \
|
||
byacc \
|
||
flex \
|
||
libglib2.0-dev \
|
||
bison \
|
||
expat \
|
||
libexpat1-dev \
|
||
dpatch \
|
||
libdb-dev \
|
||
iptables-dev \
|
||
ctags \
|
||
# For mellanox sai build
|
||
libtool-bin \
|
||
libxml2-dev \
|
||
# For BFN sdk build
|
||
libusb-1.0-0-dev \
|
||
libcurl3-nss-dev \
|
||
libunwind8-dev \
|
||
telnet \
|
||
libc-ares2 \
|
||
libgoogle-perftools4 \
|
||
# For build image
|
||
cpio \
|
||
squashfs-tools \
|
||
zip \
|
||
# For broadcom sdk build
|
||
{%- if CONFIGURED_ARCH == "amd64" %}
|
||
linux-compiler-gcc-6-x86 \
|
||
{%- endif %}
|
||
{%- if CONFIGURED_ARCH == "armhf" %}
|
||
linux-compiler-gcc-6-arm \
|
||
{%- endif %}
|
||
linux-kbuild-4.9 \
|
||
# teamd build
|
||
libdaemon-dev \
|
||
libdbus-1-dev \
|
||
libjansson-dev \
|
||
# For cavium sdk build
|
||
libpcap-dev \
|
||
dnsutils \
|
||
libusb-dev \
|
||
# For debian image reconfiguration
|
||
augeas-tools \
|
||
# For p4 build
|
||
libyaml-dev \
|
||
libevent-dev \
|
||
libjudy-dev \
|
||
libedit-dev \
|
||
libnanomsg-dev \
|
||
python-stdeb \
|
||
# For redis build
|
||
libjemalloc-dev \
|
||
liblua5.1-0-dev \
|
||
lua-bitop-dev \
|
||
lua-cjson-dev \
|
||
# For mft kernel module build
|
||
dkms \
|
||
# For python3.5 build
|
||
sharutils \
|
||
libncursesw5-dev \
|
||
libbz2-dev \
|
||
liblzma-dev \
|
||
libgdbm-dev \
|
||
tk-dev \
|
||
blt-dev \
|
||
libmpdec-dev \
|
||
libbluetooth-dev \
|
||
locales \
|
||
libsqlite3-dev \
|
||
libgpm2 \
|
||
time \
|
||
net-tools \
|
||
xvfb \
|
||
python-sphinx \
|
||
python3-sphinx \
|
||
# For Jenkins static analysis, unit testing and code coverage
|
||
cppcheck \
|
||
clang \
|
||
pylint \
|
||
python-pytest \
|
||
gcovr \
|
||
python-pytest-cov \
|
||
python-parse \
|
||
# For snmpd
|
||
default-libmysqlclient-dev \
|
||
libssl1.0-dev \
|
||
libperl-dev \
|
||
libpci-dev \
|
||
libpci3 \
|
||
libsensors4 \
|
||
libsensors4-dev \
|
||
libwrap0-dev \
|
||
# For lldpd
|
||
debhelper \
|
||
autotools-dev \
|
||
libbsd-dev \
|
||
pkg-config \
|
||
check \
|
||
# For mpdecimal
|
||
docutils-common \
|
||
libjs-sphinxdoc \
|
||
libjs-underscore \
|
||
python-docutils \
|
||
python-jinja2 \
|
||
python-markupsafe \
|
||
python-pygments \
|
||
python-roman \
|
||
python-sphinx \
|
||
sphinx-common \
|
||
python3-sphinx \
|
||
# For sonic config engine testing
|
||
python-lxml \
|
||
python-jinja2 \
|
||
python-netaddr \
|
||
python-ipaddr \
|
||
python-yaml \
|
||
python3-yaml \
|
||
# For lockfile
|
||
procmail \
|
||
# For pam_tacplus build
|
||
autoconf-archive \
|
||
# For iproute2
|
||
cm-super-minimal \
|
||
libatm1-dev \
|
||
libelf-dev \
|
||
libmnl-dev \
|
||
libselinux1-dev \
|
||
linuxdoc-tools \
|
||
lynx \
|
||
texlive-latex-extra \
|
||
texlive-latex-recommended \
|
||
iproute2 \
|
||
# For python-click build
|
||
python-sphinx \
|
||
python-docutils \
|
||
python3-all \
|
||
python3-setuptools \
|
||
python3-sphinx \
|
||
python3-docutils \
|
||
python3-requests \
|
||
python3-pytest \
|
||
python3-colorama \
|
||
# For bash
|
||
texi2html \
|
||
# For initramfs
|
||
bash-completion \
|
||
{%- if CONFIGURED_ARCH == "amd64" %}
|
||
# For sonic vs image build
|
||
dosfstools \
|
||
qemu-kvm \
|
||
libvirt-clients \
|
||
{%- endif %}
|
||
# For lm-sensors
|
||
librrd8 \
|
||
librrd-dev \
|
||
rrdtool \
|
||
# For smartmontools 6.6-1
|
||
automake1.11 \
|
||
libselinux1-dev \
|
||
# For kdump-tools
|
||
liblzo2-dev \
|
||
# For iptables
|
||
libnetfilter-conntrack-dev \
|
||
libnftnl-dev \
|
||
# For SAI3.7
|
||
protobuf-compiler \
|
||
libprotobuf-dev \
|
||
xxd \
|
||
# For DHCP Monitor tool
|
||
libexplain-dev \
|
||
libevent-dev \
|
||
# For libyang
|
||
swig \
|
||
# For SWI Tools
|
||
python-m2crypto
|
||
|
||
## Config dpkg
|
||
## install the configuration file if it’s currently missing
|
||
RUN sudo augtool --autosave "set /files/etc/dpkg/dpkg.cfg/force-confmiss"
|
||
## combined with confold: overwrite configuration files that you have not modified
|
||
RUN sudo augtool --autosave "set /files/etc/dpkg/dpkg.cfg/force-confdef"
|
||
## do not modify the current configuration file, the new version is installed with a .dpkg-dist suffix
|
||
RUN sudo augtool --autosave "set /files/etc/dpkg/dpkg.cfg/force-confold"
|
||
|
||
# For smartmontools 6.6-1
|
||
RUN apt-get -t stretch-backports install -y debhelper
|
||
|
||
# For linux build
|
||
RUN apt-get -y build-dep linux
|
||
|
||
# For gobgp and telemetry build
|
||
RUN export VERSION=1.14.2 \
|
||
{%- if CONFIGURED_ARCH == "armhf" %}
|
||
&& wget https://storage.googleapis.com/golang/go$VERSION.linux-armv6l.tar.gz \
|
||
&& tar -C /usr/local -xzf go$VERSION.linux-armv6l.tar.gz \
|
||
{%- elif CONFIGURED_ARCH == "arm64" %}
|
||
&& wget https://storage.googleapis.com/golang/go$VERSION.linux-arm64.tar.gz \
|
||
&& tar -C /usr/local -xzf go$VERSION.linux-arm64.tar.gz \
|
||
{%- else %}
|
||
&& wget https://storage.googleapis.com/golang/go$VERSION.linux-amd64.tar.gz \
|
||
&& tar -C /usr/local -xzf go$VERSION.linux-amd64.tar.gz \
|
||
{%- endif %}
|
||
&& echo 'export GOROOT=/usr/local/go' >> /etc/bash.bashrc \
|
||
&& echo 'export PATH=$PATH:$GOROOT/bin' >> /etc/bash.bashrc \
|
||
&& rm go$VERSION.linux-*.tar.gz
|
||
|
||
# For p4 build
|
||
RUN pip install \
|
||
ctypesgen==0.r125 \
|
||
crc16
|
||
|
||
# For sonic config engine testing
|
||
RUN pip install pyangbind==0.6.0
|
||
# Note: force upgrade debian packaged jinja2, if installed
|
||
RUN pip install --force-reinstall --upgrade "jinja2>=2.10"
|
||
|
||
# For templating
|
||
RUN pip install j2cli==0.3.10
|
||
|
||
# Remove python-click 6.6
|
||
RUN apt-get purge -y python-click
|
||
# For sonic utilities testing
|
||
RUN pip install click natsort tabulate netifaces==0.10.7 fastentrypoints
|
||
|
||
# For sonic snmpagent mock testing
|
||
RUN pip3 install mockredispy==2.9.3
|
||
|
||
RUN pip3 install "PyYAML>=5.1"
|
||
|
||
# For sonic-platform-common testing
|
||
RUN pip3 install redis
|
||
|
||
# For supervisor build
|
||
RUN pip install meld3 mock
|
||
|
||
# For vs image build
|
||
RUN pip install pexpect==4.6.0
|
||
|
||
# For sonic-utilities build
|
||
RUN pip install mockredispy==2.9.3
|
||
RUN pip install pytest-runner==4.4
|
||
RUN pip install setuptools==40.8.0
|
||
|
||
# For sonic-swss-common testing
|
||
RUN pip install Pympler==0.8
|
||
|
||
# For sonic_yang_mgmt build
|
||
RUN pip install ijson==2.6.1
|
||
RUN pip3 install ijson==2.6.1
|
||
RUN pip install jsondiff==1.2.0
|
||
RUN pip install xmltodict==0.12.0
|
||
RUN pip install pyang==2.1.1
|
||
|
||
# For mgmt-framework build
|
||
RUN pip install mmh3
|
||
|
||
# Install dependencies for isc-dhcp-relay build
|
||
RUN apt-get -y build-dep isc-dhcp
|
||
|
||
# Install vim
|
||
RUN apt-get install -y vim
|
||
|
||
# Install rsyslog
|
||
RUN apt-get install -y rsyslog
|
||
|
||
RUN apt-get install -y libgtest-dev
|
||
RUN apt-get install -y libarchive13 librhash0
|
||
RUN apt-get -t stretch-backports install -y libuv1
|
||
# Install cmake/cmake-data 3.13.2-1_bpo9+1
|
||
# latest cmake 3.16.3 break the build libyang 1.0.73
|
||
RUN wget -O cmake-data_3.13.2-1_bpo9+1_all.deb "https://sonicstorage.blob.core.windows.net/packages/cmake/cmake-data_3.13.2-1_bpo9%2B1_all.deb?st=2020-03-27T02%3A22%3A24Z&se=2100-03-26T19%3A00%3A00Z&sp=rl&sv=2018-03-28&sr=b&sig=Xby%2Bm3OZOjPB%2FSlDbHD65yDcPzAgoys%2FA3vK8RB4BzA%3D"
|
||
RUN dpkg -i cmake-data_3.13.2-1_bpo9+1_all.deb || apt-get install -f
|
||
{% if CONFIGURED_ARCH == "armhf" %}
|
||
RUN wget -O cmake_3.13.2-1_bpo9+1_armhf.deb "https://sonicstorage.blob.core.windows.net/packages/cmake/cmake_3.13.2-1_bpo9%2B1_armhf.deb?st=2020-03-27T02%3A29%3A41Z&se=2100-03-26T19%3A00%3A00Z&sp=rl&sv=2018-03-28&sr=b&sig=sWt7kxrFumn020d2GeutGJ716cuQsFwmAmgU%2BJ0kqnk%3D"
|
||
RUN dpkg -i cmake_3.13.2-1_bpo9+1_armhf.deb || apt-get install -f
|
||
{% elif CONFIGURED_ARCH == "arm64" %}
|
||
RUN wget -O cmake_3.13.2-1_bpo9+1_arm64.deb "https://sonicstorage.blob.core.windows.net/packages/cmake/cmake_3.13.2-1_bpo9%2B1_arm64.deb?st=2020-03-27T02%3A28%3A38Z&se=2100-03-26T19%3A00%3A00Z&sp=rl&sv=2018-03-28&sr=b&sig=rrHMkLi29aI8yH6s52ILCY8VcEbNFrzYT2DmC5RwOgs%3D"
|
||
RUN dpkg -i cmake_3.13.2-1_bpo9+1_arm64.deb || apt-get install -f
|
||
{% else %}
|
||
RUN wget -O cmake_3.13.2-1_bpo9+1_amd64.deb "https://sonicstorage.blob.core.windows.net/packages/cmake/cmake_3.13.2-1_bpo9%2B1_amd64.deb?st=2020-03-27T02%3A27%3A21Z&se=2100-03-26T19%3A00%3A00Z&sp=rl&sv=2018-03-28&sr=b&sig=4MvmmDBQuicFEJYakLm7xCNU19yJ8GIP4ankFSnITKY%3D"
|
||
RUN dpkg -i cmake_3.13.2-1_bpo9+1_amd64.deb || apt-get install -f
|
||
{% endif %}
|
||
RUN cd /usr/src/gtest && cmake . && make -C /usr/src/gtest
|
||
|
||
RUN mkdir /var/run/sshd
|
||
EXPOSE 22
|
||
|
||
# Install depot-tools (for git-retry)
|
||
RUN git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git /usr/share/depot_tools
|
||
ENV PATH /usr/share/depot_tools:$PATH
|
||
|
||
# Install docker engine 17.03.2~ce-0 inside docker and enable experimental feature
|
||
RUN apt-get update
|
||
RUN apt-get install -y \
|
||
apt-transport-https \
|
||
ca-certificates \
|
||
curl \
|
||
gnupg2 \
|
||
software-properties-common
|
||
RUN curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add -
|
||
RUN add-apt-repository \
|
||
"deb [arch={{ CONFIGURED_ARCH }}] https://download.docker.com/linux/debian \
|
||
$(lsb_release -cs) \
|
||
stable"
|
||
RUN apt-get update
|
||
{%- if CONFIGURED_ARCH == "amd64" %}
|
||
RUN apt-get install -y docker-ce=5:18.09.5~3-0~debian-stretch docker-ce-cli=5:18.09.5~3-0~debian-stretch
|
||
{%- else %}
|
||
RUN apt-get install -y docker-ce=18.06.3~ce~3-0~debian
|
||
{%- endif %}
|
||
RUN echo "DOCKER_OPTS=\"--experimental --storage-driver=vfs\"" >> /etc/default/docker
|
||
|
||
# Install swi tools
|
||
RUN python -m pip install git+https://github.com/aristanetworks/swi-tools.git@d51761ec0bb93c73039233f3c01ed48235ffad00
|