a4098de529
* sonic-buildimage: Add 7060DX5-64S brcm tunnel config Add bcm_tunnel_term_compatible_mode: 1 support, which allows Loopback configuration to no longer result in SAI failure "tunnel terminator add failed with error Feature unavailable" that caused Orchagent SIGABRT Signed-off-by: Aaron Payment <aaronp@arista.com> * sonic-buildimage: Set port config ENABLE:0 in 7060DX5-64S brcm config Set ENABLE:0 for the front panel ports in the brcm config so that the ports are default admin down. This change prevents the issue that ports are able to link up and pass traffic resulting in mac learn events after SAI create switch and before SAI admin state up. The unexpected mac learn events resulted in Orch agent crash in PortsOrch init, which occurs after SAI create switch and before SAI admin state up. * fix sensors.conf on CatalinaDD * Add support for two sfp ports * Add copper 50g tuning to babbagelp on catalina --------- Signed-off-by: Aaron Payment <aaronp@arista.com> Co-authored-by: enes.oncu <enes.oncu@arista.com> Co-authored-by: Boyang Yu <byu@arista.com>
31 lines
1.0 KiB
Plaintext
31 lines
1.0 KiB
Plaintext
# libsensors configuration file for DCS-7060DX5-64S
|
|
# ------------------------------------------------#
|
|
|
|
bus "i2c-19" "SCD 0000:01:00.0 SMBus master 1 bus 0"
|
|
bus "i2c-22" "SCD 0000:01:00.0 SMBus master 1 bus 3"
|
|
bus "i2c-23" "SCD 0000:01:00.0 SMBus master 1 bus 4"
|
|
bus "i2c-24" "SCD 0000:01:00.0 SMBus master 1 bus 5"
|
|
bus "i2c-107" "SCD 0000:00:18.7 SMBus master 0 bus 0"
|
|
|
|
chip "tmp464-i2c-19-48"
|
|
label temp1 "Board sensor"
|
|
label temp2 "TH4 exhaust temp sensor"
|
|
label temp3 "Inlet temp sensor"
|
|
|
|
chip "dps800-i2c-22-58"
|
|
label temp1 "Power supply 1 hotspot sensor"
|
|
label temp2 "Power supply 1 inlet temp sensor"
|
|
ignore temp3 "Power supply 1 exhaust temp sensor"
|
|
|
|
chip "dps800-i2c-23-58"
|
|
label temp1 "Power supply 2 hotspot sensor"
|
|
label temp2 "Power supply 2 inlet temp sensor"
|
|
label temp3 "Power supply 2 exhaust temp sensor"
|
|
|
|
chip "lm73-i2c-24-48"
|
|
label temp1 "Front panel temp sensor"
|
|
|
|
chip "max6658-i2c-107-4c"
|
|
label temp1 "CPU board temp sensor"
|
|
label temp2 "Back panel temp sensor"
|