26afa348ea
* Update sensors.conf for 7050QX-32 and 7050QX-32S These two platforms were using a previous version of a kernel driver. The new one names the i2c buses differently. We therefore need to rename them here. * Fix the default minigraph for the 7050QX-32S The interface offset is invalid which makes sonic-cfggen generate an invalid config_db.jon in rc.local. This config then silently makes orchagent/syncd fail. * Use the partition on which sonic-aboot.swi is Instead of always assuming /mnt/flash, use the partition where the image to be installed lies. This allow for the image to be on any partition.
41 lines
1.1 KiB
Plaintext
41 lines
1.1 KiB
Plaintext
# libsensors configuration file for DCS-7050QX-32S
|
|
# ------------------------------------------------
|
|
#
|
|
|
|
bus "i2c-2" "SCD 0000:02:00.0 SMBus master 0 bus 0"
|
|
bus "i2c-3" "SCD 0000:02:00.0 SMBus master 0 bus 1"
|
|
bus "i2c-5" "SCD 0000:02:00.0 SMBus master 0 bus 3"
|
|
bus "i2c-6" "SCD 0000:02:00.0 SMBus master 0 bus 4"
|
|
bus "i2c-7" "SCD 0000:02:00.0 SMBus master 0 bus 5"
|
|
|
|
chip "k10temp-pci-00c3"
|
|
label temp1 "Cpu temp sensor"
|
|
|
|
chip "max6658-i2c-2-4c"
|
|
label temp1 "Board temp sensor"
|
|
set temp1_max 55
|
|
set temp1_crit 70
|
|
|
|
label temp2 "Front panel temp sensor"
|
|
set temp2_max 65
|
|
set temp2_crit 75
|
|
|
|
chip "max6658-i2c-3-4c"
|
|
label temp1 "Cpu board temp sensor"
|
|
set temp1_max 75
|
|
set temp1_crit 80
|
|
|
|
label temp2 "Back panel temp sensor"
|
|
set temp2_max 75
|
|
set temp2_crit 80
|
|
|
|
chip "pmbus-i2c-6-58"
|
|
label temp1 "Power supply 1 hotspot sensor"
|
|
label temp2 "Power supply 1 inlet temp sensor"
|
|
label temp3 "Power supply 1 sensor"
|
|
|
|
chip "pmbus-i2c-5-58"
|
|
label temp1 "Power supply 2 hotspot sensor"
|
|
label temp2 "Power supply 2 inlet temp sensor"
|
|
label temp3 "Power supply 2 sensor"
|