6f496bda20
* [device][platform] d6254qs d6556 platform porting [device][platform] sensor and status led support for d7032q28b d7254q28b d7264q28b d6254qs d6556 [device][platform] qos support for d7032q28b d7254q28b [device][platform] service configuration files for d7032q28b d7254q28b d7264q28b d6254qs d6556 * remove binary files and remove non-supported attributes in config.bcm * remove gpio-ich here. file a PR in sonic-linux-kernel instead. * remove unnecessary comments * add GPL license
780 lines
23 KiB
C
780 lines
23 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kthread.h>
|
|
|
|
//=================================
|
|
#include <linux/mutex.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/ipmi.h>
|
|
#include <linux/ipmi_smi.h>
|
|
|
|
#define IPMI_MAX_INTF (4)
|
|
#define NETFN_OEM 0x30
|
|
#define CMD_GETDATA 0x31
|
|
#define CMD_SETDATA 0x32
|
|
#define FAN_NUM 4
|
|
#define PSU_NUM 2
|
|
|
|
#define PSU1 0x5800
|
|
#define PSU2 0x5900
|
|
#define BMC_PMBusNumber 3
|
|
#define PMBus_Vender 0x99
|
|
#define PMBus_Serial 0x9E
|
|
#define PMBus_Temp2 0x8E
|
|
#define PMBus_Version 0x9B
|
|
#define MaxLeng_Result 0x20
|
|
|
|
#define MAX_IPMI_RECV_LENGTH 0xff
|
|
|
|
static long pmbus_reg2data_linear(int data, int linear16);
|
|
struct ipmi_result{
|
|
char result[MAX_IPMI_RECV_LENGTH];
|
|
int result_length;
|
|
};
|
|
|
|
DEFINE_MUTEX(ipmi_mutex);
|
|
DEFINE_MUTEX(ipmi2_mutex);
|
|
static struct ipmi_result ipmiresult;
|
|
static struct device *hwmon_dev;
|
|
static ipmi_user_t ipmi_mh_user = NULL;
|
|
static void msg_handler(struct ipmi_recv_msg *msg,void* handler_data);
|
|
static struct ipmi_user_hndl ipmi_hndlrs = { .ipmi_recv_hndl = msg_handler,};
|
|
|
|
static atomic_t dummy_count = ATOMIC_INIT(0);
|
|
static void dummy_smi_free(struct ipmi_smi_msg *msg)
|
|
{
|
|
atomic_dec(&dummy_count);
|
|
}
|
|
static void dummy_recv_free(struct ipmi_recv_msg *msg)
|
|
{
|
|
atomic_dec(&dummy_count);
|
|
}
|
|
static struct ipmi_smi_msg halt_smi_msg = {
|
|
.done = dummy_smi_free
|
|
};
|
|
static struct ipmi_recv_msg halt_recv_msg = {
|
|
.done = dummy_recv_free
|
|
};
|
|
|
|
struct __attribute__ ((__packed__)) psoc_psu_layout {
|
|
u16 psu1_iin;
|
|
u16 psu2_iin;
|
|
u16 psu1_iout;
|
|
u16 psu2_iout;
|
|
|
|
u16 psu1_pin;
|
|
u16 psu2_pin;
|
|
u16 psu1_pout;
|
|
u16 psu2_pout;
|
|
|
|
u16 psu1_vin;
|
|
u16 psu2_vin;
|
|
u16 psu1_vout;
|
|
u16 psu2_vout;
|
|
};
|
|
|
|
struct __attribute__ ((__packed__)) psoc_layout {
|
|
u8 ctl; //offset: 0
|
|
u16 switch_temp; //offset: 1
|
|
u8 reserve0; //offset: 3
|
|
|
|
u8 fw_upgrade; //offset: 4
|
|
|
|
//i2c bridge
|
|
u8 i2c_st; //offset: 5
|
|
u8 i2c_ctl; //offset: 6
|
|
u8 i2c_addr; //offset: 7
|
|
u8 i2c_data[0x20]; //offset: 8
|
|
|
|
//gpo
|
|
u8 led_ctl; //offset: 28
|
|
|
|
u8 gpio; //offset: 29
|
|
|
|
//pwm duty
|
|
u8 pwm[FAN_NUM]; //offset: 2a
|
|
u8 pwm_psu[PSU_NUM]; //offset: 2e
|
|
|
|
//fan rpm
|
|
u16 fan[FAN_NUM*2]; //offset: 30
|
|
|
|
u8 reserve1[4]; //offset: 40
|
|
|
|
//gpi
|
|
u8 gpi_fan; //offset: 44
|
|
|
|
//psu state
|
|
u8 psu_state; //offset: 45
|
|
|
|
//temperature
|
|
u16 temp[5]; //offset: 46
|
|
u16 temp_psu[PSU_NUM]; //offset: 50
|
|
|
|
//version
|
|
u8 version[2]; //offset: 54
|
|
|
|
u8 reserve2[4]; //offset: 56
|
|
struct psoc_psu_layout psu_info; //offset: 5a
|
|
};
|
|
|
|
/* definition */
|
|
/* definition */
|
|
#define PSOC_OFF(m) offsetof(struct psoc_layout, m)
|
|
#define PSOC_PSU_OFF(m) offsetof(struct psoc_psu_layout, m)
|
|
|
|
#define SWITCH_TMP_OFFSET PSOC_OFF(switch_temp)
|
|
#define PWM_OFFSET PSOC_OFF(pwm)
|
|
#define THERMAL_OFFSET PSOC_OFF(temp)
|
|
#define RPM_OFFSET PSOC_OFF(fan)
|
|
#define DIAG_FLAG_OFFSET PSOC_OFF(ctl)
|
|
#define FAN_LED_OFFSET PSOC_OFF(led_ctl)
|
|
#define FAN_GPI_OFFSET PSOC_OFF(gpi_fan)
|
|
#define PSOC_PSU_OFFSET PSOC_OFF(psu_state)
|
|
#define VERSION_OFFSET PSOC_OFF(version)
|
|
#define PSU_INFO_OFFSET PSOC_OFF(psu_info)
|
|
|
|
|
|
static void msg_handler(struct ipmi_recv_msg *recv_msg,void* handler_data)
|
|
{
|
|
struct ipmi_result *msg_result = recv_msg->user_msg_data;
|
|
|
|
if(recv_msg->msg.data[0]==0 && recv_msg->msg.data_len>0) {
|
|
msg_result->result_length=recv_msg->msg.data_len-1;
|
|
memcpy(msg_result->result, &recv_msg->msg.data[1], recv_msg->msg.data_len-1);
|
|
}
|
|
ipmi_free_recv_msg(recv_msg);
|
|
mutex_unlock(&ipmi_mutex);
|
|
|
|
return;
|
|
}
|
|
|
|
int start_ipmi_command(char NetFn, char cmd,char *data,int data_length, char* result, int* result_length)
|
|
{
|
|
int rv=0,i;
|
|
int timeout;
|
|
|
|
//wait previous command finish at least 50msec
|
|
timeout=50;
|
|
while((mutex_is_locked(&ipmi_mutex) == 1 || (mutex_is_locked(&ipmi2_mutex) == 1)) && (--timeout)>0) { usleep_range(1000,1010); }
|
|
if(timeout==0) { return -1; }
|
|
mutex_lock(&ipmi_mutex);
|
|
mutex_lock(&ipmi2_mutex);
|
|
|
|
if(ipmi_mh_user == NULL) {
|
|
for (i=0,rv=1; i<IPMI_MAX_INTF && rv; i++) {
|
|
rv = ipmi_create_user(i, &ipmi_hndlrs, NULL, &ipmi_mh_user);
|
|
}
|
|
}
|
|
|
|
if (rv < 0) {
|
|
mutex_unlock(&ipmi_mutex);
|
|
mutex_unlock(&ipmi2_mutex);
|
|
return rv;
|
|
}
|
|
else {
|
|
struct ipmi_system_interface_addr addr;
|
|
struct kernel_ipmi_msg msg;
|
|
uint8_t msg_data[data_length];
|
|
|
|
memcpy(msg_data,data,data_length);
|
|
addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
|
|
addr.channel = IPMI_BMC_CHANNEL;
|
|
addr.lun = 0;
|
|
|
|
msg.netfn = NetFn;
|
|
msg.cmd = cmd;
|
|
msg.data = msg_data;
|
|
msg.data_len = data_length;
|
|
|
|
rv = ipmi_request_supply_msgs(ipmi_mh_user, (struct ipmi_addr*)&addr, 0,&msg, &ipmiresult, &halt_smi_msg, &halt_recv_msg, 0);
|
|
if (rv) {
|
|
mutex_unlock(&ipmi_mutex);
|
|
mutex_unlock(&ipmi2_mutex);
|
|
return -6;
|
|
}
|
|
|
|
//skip command if 1sec no response from remote
|
|
timeout=1000;
|
|
while(mutex_is_locked(&ipmi_mutex) == 1 && (--timeout)>0) { usleep_range(1000,1100);}
|
|
if(timeout==0) {
|
|
mutex_unlock(&ipmi2_mutex);
|
|
return -1;
|
|
}
|
|
else {
|
|
*result_length=ipmiresult.result_length;
|
|
memcpy(result,ipmiresult.result,*result_length);
|
|
mutex_unlock(&ipmi2_mutex);
|
|
return 0;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(start_ipmi_command);
|
|
|
|
static ssize_t psoc_ipmi_read(u8 *buf, u8 offset, size_t count)
|
|
{
|
|
uint8_t data[2];
|
|
int result_len=0;
|
|
int rv;
|
|
|
|
data[0] = offset;
|
|
data[1] = count;
|
|
|
|
rv=start_ipmi_command(NETFN_OEM, CMD_GETDATA,data,2, buf, &result_len);
|
|
|
|
return result_len;
|
|
}
|
|
|
|
static ssize_t psoc_ipmi_write(char *buf, unsigned offset, size_t count)
|
|
{
|
|
uint8_t data[count+1],result[1];
|
|
int result_len;
|
|
|
|
data[0] = offset;
|
|
memcpy(&data[1],buf,count);
|
|
|
|
start_ipmi_command(NETFN_OEM, CMD_SETDATA,data,count+1, result, &result_len);
|
|
return count;
|
|
}
|
|
|
|
|
|
static u16 psoc_read16(u8 offset)
|
|
{
|
|
u16 value = 0;
|
|
u8 buf[]={0,0};
|
|
|
|
if(psoc_ipmi_read(buf, offset, 2) == 2)
|
|
value = (buf[0]<<8 | buf[1]<<0);
|
|
|
|
return value;
|
|
}
|
|
|
|
static u8 psoc_read8(u8 offset)
|
|
{
|
|
u8 value = 0;
|
|
u8 buf = 0;
|
|
|
|
if(psoc_ipmi_read(&buf, offset, 1) == 1)
|
|
value = buf;
|
|
|
|
return value;
|
|
}
|
|
|
|
/*
|
|
CPLD report the PSU0 status
|
|
000 = PSU normal operation
|
|
100 = PSU fault
|
|
010 = PSU unpowered
|
|
111 = PSU not installed
|
|
|
|
7 6 | 5 4 3 | 2 1 0
|
|
----------------------
|
|
| psu1 | psu0
|
|
*/
|
|
static char* psu_str[] = {
|
|
"normal", //000
|
|
"NA", //001
|
|
"unpowered", //010
|
|
"NA", //011
|
|
"fault", //100
|
|
"NA", //101
|
|
"NA", //110
|
|
"not installed", //111
|
|
};
|
|
|
|
static ssize_t show_psu_st(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
u32 status=0;
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u8 byte=0;
|
|
int shift = (attr->index == 0)?3:0;
|
|
|
|
status = psoc_ipmi_read(&byte, PSOC_PSU_OFFSET, 1);
|
|
|
|
byte = (byte >> shift) & 0x7;
|
|
|
|
status = sprintf (buf, "%d : %s\n", byte, psu_str[byte]);
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
static ssize_t show_ipmi_pmbus(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
uint8_t data[4],result[MaxLeng_Result];
|
|
int result_len=0;
|
|
|
|
data[0] = BMC_PMBusNumber;
|
|
data[1] = (attr->index & 0xFF00 ) >>7;
|
|
data[3] = attr->index & 0xff;
|
|
if(data[3]==PMBus_Temp2)
|
|
{data[2]=2;}
|
|
else
|
|
{data[2]=MaxLeng_Result;}
|
|
|
|
if(start_ipmi_command(0x06, 0x52,data,4, result, &result_len)==0)
|
|
{
|
|
if(data[3]==PMBus_Temp2)
|
|
{
|
|
return sprintf(buf, "%ld \n", pmbus_reg2data_linear(result[0] | (result[1]<<8), 0 ));
|
|
}
|
|
result[result[0]+1]='\0';
|
|
return sprintf(buf, "%s\n",&result[1] );
|
|
}
|
|
else
|
|
{
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static ssize_t show_thermal(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
int status=0;
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u8 offset = attr->index * 2 + THERMAL_OFFSET;
|
|
|
|
status = psoc_read16(offset);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
(s8)(status>>8) * 1000 );
|
|
}
|
|
|
|
static ssize_t show_pwm(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
int status=0;
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u8 offset = attr->index + PWM_OFFSET;
|
|
|
|
status = psoc_read8(offset);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
status);
|
|
}
|
|
|
|
static ssize_t set_pwm(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u8 offset = attr->index + PWM_OFFSET;
|
|
|
|
u8 pwm = simple_strtol(buf, NULL, 10);
|
|
if(pwm > 255) pwm = 255;
|
|
|
|
psoc_ipmi_write(&pwm, offset, 1);
|
|
|
|
return count;
|
|
}
|
|
|
|
|
|
static ssize_t show_rpm(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
int status=0;
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u8 offset = attr->index*2 + RPM_OFFSET;
|
|
|
|
status = psoc_read16(offset);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
status);
|
|
}
|
|
|
|
static ssize_t show_switch_tmp(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
u16 status=0;
|
|
u16 temp = 0;
|
|
|
|
status = psoc_ipmi_read((u8*)&temp, SWITCH_TMP_OFFSET, 2);
|
|
|
|
status = sprintf (buf, "%d\n", (s8)(temp>>8) * 1000 );
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
static ssize_t set_switch_tmp(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
long temp = simple_strtol(buf, NULL, 10);
|
|
u16 temp2 = ( (temp/1000) <<8 ) & 0xFF00 ;
|
|
|
|
//printk("set_switch_tmp temp=%d, temp2=0x%x (%x,%x)\n", temp, temp2, ( ( (temp/1000) <<8 ) & 0xFF00 ), (( (temp%1000) / 10 ) & 0xFF));
|
|
psoc_ipmi_write((u8*)&temp2, SWITCH_TMP_OFFSET, 2);
|
|
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_diag(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
u16 status=0;
|
|
u8 diag_flag = 0;
|
|
|
|
status = psoc_ipmi_read((u8*)&diag_flag, DIAG_FLAG_OFFSET, 1);
|
|
|
|
status = sprintf (buf, "%d\n", ((diag_flag & 0x80)?1:0));
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
static ssize_t set_diag(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
u8 value = 0;
|
|
u8 diag = simple_strtol(buf, NULL, 10);
|
|
|
|
diag = diag?1:0;
|
|
|
|
psoc_ipmi_read((u8*)&value, DIAG_FLAG_OFFSET, 1);
|
|
if(diag) value |= (1<<7);
|
|
else value &= ~(1<<7);
|
|
psoc_ipmi_write((u8*)&value, DIAG_FLAG_OFFSET, 1);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_version(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
u16 status=0;
|
|
|
|
status = psoc_read16(VERSION_OFFSET);
|
|
|
|
return sprintf(buf, "ver: %x.%x\n", (status & 0xFF00)>>8, (status & 0xFF) );
|
|
}
|
|
|
|
static ssize_t show_name(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
return sprintf (buf, "inv_psoc\n");
|
|
}
|
|
|
|
|
|
static ssize_t show_fan_led(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
int status=0;
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u8 bit = attr->index;
|
|
|
|
status = psoc_read8(FAN_LED_OFFSET);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
(status & (1<<bit))?1:0 );
|
|
}
|
|
|
|
static ssize_t set_fan_led(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
u8 bit = attr->index;
|
|
u8 led_state = 0;
|
|
|
|
u8 v = simple_strtol(buf, NULL, 10);
|
|
|
|
led_state = psoc_read8(FAN_LED_OFFSET);
|
|
if(v) led_state |= (1<<bit);
|
|
else led_state &= ~(1<<bit);
|
|
psoc_ipmi_write(&led_state, FAN_LED_OFFSET, 1);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_value8(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
int status=0;
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u8 offset = attr->index;
|
|
|
|
status = psoc_read8(offset);
|
|
|
|
return sprintf(buf, "0x%02X\n", status );
|
|
}
|
|
|
|
static long pmbus_reg2data_linear(int data, int linear16)
|
|
{
|
|
s16 exponent;
|
|
s32 mantissa;
|
|
long val;
|
|
|
|
if (linear16) { /* LINEAR16 */
|
|
exponent = -9;
|
|
mantissa = (u16) data;
|
|
} else { /* LINEAR11 */
|
|
exponent = ((s16)data) >> 11;
|
|
exponent = ((s16)( data & 0xF800) ) >> 11;
|
|
mantissa = ((s32)((data & 0x7ff) << 5)) >> 5;
|
|
}
|
|
|
|
//printk("data=%d, m=%d, e=%d\n", data, exponent, mantissa);
|
|
val = mantissa;
|
|
|
|
/* scale result to micro-units for power sensors */
|
|
val = val * 1000L;
|
|
|
|
if (exponent >= 0)
|
|
val <<= exponent;
|
|
else
|
|
val >>= -exponent;
|
|
|
|
return val;
|
|
}
|
|
|
|
static ssize_t show_psu_psoc(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
u16 status=0;
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u8 offset = attr->index + PSU_INFO_OFFSET;
|
|
|
|
status = psoc_read16(offset);
|
|
|
|
return sprintf(buf, "%ld \n", pmbus_reg2data_linear(status, strstr(attr->dev_attr.attr.name, "vout")? 1:0 ));
|
|
}
|
|
|
|
|
|
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_thermal, 0, 0);
|
|
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_thermal, 0, 1);
|
|
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_thermal, 0, 2);
|
|
static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_thermal, 0, 3);
|
|
static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_thermal, 0, 4);
|
|
static SENSOR_DEVICE_ATTR(thermal_psu1, S_IRUGO, show_thermal, 0, 5);
|
|
static SENSOR_DEVICE_ATTR(thermal_psu2, S_IRUGO, show_thermal, 0, 6);
|
|
|
|
static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 0);
|
|
static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 1);
|
|
static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 2);
|
|
static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 3);
|
|
static SENSOR_DEVICE_ATTR(pwm_psu1, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 4);
|
|
static SENSOR_DEVICE_ATTR(pwm_psu2, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 5);
|
|
|
|
static SENSOR_DEVICE_ATTR(psu0, S_IRUGO, show_psu_st, 0, 0);
|
|
static SENSOR_DEVICE_ATTR(psu1, S_IRUGO, show_psu_st, 0, 1);
|
|
|
|
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_rpm, 0, 0);
|
|
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_rpm, 0, 1);
|
|
static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_rpm, 0, 2);
|
|
static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_rpm, 0, 3);
|
|
static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_rpm, 0, 4);
|
|
static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_rpm, 0, 5);
|
|
static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_rpm, 0, 6);
|
|
static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_rpm, 0, 7);
|
|
static SENSOR_DEVICE_ATTR(rpm_psu1, S_IRUGO, show_rpm, 0, 8);
|
|
static SENSOR_DEVICE_ATTR(rpm_psu2, S_IRUGO, show_rpm, 0, 9);
|
|
|
|
static SENSOR_DEVICE_ATTR(switch_tmp, S_IWUSR|S_IRUGO, show_switch_tmp, set_switch_tmp, 0);
|
|
static SENSOR_DEVICE_ATTR(temp6_input, S_IWUSR|S_IRUGO, show_switch_tmp, set_switch_tmp, 0);
|
|
|
|
static SENSOR_DEVICE_ATTR(diag, S_IWUSR|S_IRUGO, show_diag, set_diag, 0);
|
|
static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, 0, 0);
|
|
static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
|
|
|
|
static SENSOR_DEVICE_ATTR(fan_led_grn1, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 0);
|
|
static SENSOR_DEVICE_ATTR(fan_led_grn2, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 1);
|
|
static SENSOR_DEVICE_ATTR(fan_led_grn3, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 2);
|
|
static SENSOR_DEVICE_ATTR(fan_led_grn4, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 3);
|
|
static SENSOR_DEVICE_ATTR(fan_led_red1, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 4);
|
|
static SENSOR_DEVICE_ATTR(fan_led_red2, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 5);
|
|
static SENSOR_DEVICE_ATTR(fan_led_red3, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 6);
|
|
static SENSOR_DEVICE_ATTR(fan_led_red4, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 7);
|
|
|
|
static SENSOR_DEVICE_ATTR(fan_gpi, S_IRUGO, show_value8, 0, FAN_GPI_OFFSET);
|
|
static SENSOR_DEVICE_ATTR(psoc_psu1_vin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_vin));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu1_vout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_vout));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu1_iin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_iin));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu1_iout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_iout));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu1_pin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_pin));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu1_pout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_pout));
|
|
|
|
|
|
static SENSOR_DEVICE_ATTR(psoc_psu2_vin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_vin));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu2_vout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_vout));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu2_iin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_iin));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu2_iout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_iout));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu2_pin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_pin));
|
|
static SENSOR_DEVICE_ATTR(psoc_psu2_pout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_pout));
|
|
|
|
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_vin));
|
|
static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_vin));
|
|
static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_iin));
|
|
static SENSOR_DEVICE_ATTR(curr2_input, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_iin));
|
|
static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_pin));
|
|
static SENSOR_DEVICE_ATTR(power2_input, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_pin));
|
|
|
|
//IPMI
|
|
static SENSOR_DEVICE_ATTR(thermal2_psu1, S_IRUGO, show_ipmi_pmbus, 0, PSU1 | PMBus_Temp2);
|
|
static SENSOR_DEVICE_ATTR(psoc_psu1_vender, S_IRUGO, show_ipmi_pmbus, 0, PSU1 | PMBus_Vender);
|
|
static SENSOR_DEVICE_ATTR(psoc_psu1_serial, S_IRUGO, show_ipmi_pmbus, 0, PSU1 | PMBus_Serial);
|
|
static SENSOR_DEVICE_ATTR(psoc_psu1_version, S_IRUGO, show_ipmi_pmbus, 0, PSU1 | PMBus_Version);
|
|
|
|
static SENSOR_DEVICE_ATTR(thermal2_psu2, S_IRUGO, show_ipmi_pmbus, 0, PSU2 | PMBus_Temp2);
|
|
static SENSOR_DEVICE_ATTR(psoc_psu2_vender, S_IRUGO, show_ipmi_pmbus, 0, PSU2 | PMBus_Vender);
|
|
static SENSOR_DEVICE_ATTR(psoc_psu2_serial, S_IRUGO, show_ipmi_pmbus, 0, PSU2 | PMBus_Serial);
|
|
static SENSOR_DEVICE_ATTR(psoc_psu2_version, S_IRUGO, show_ipmi_pmbus, 0, PSU2 | PMBus_Version);
|
|
|
|
|
|
static struct attribute *psoc_attributes[] = {
|
|
//thermal
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp5_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_thermal_psu1.dev_attr.attr,
|
|
&sensor_dev_attr_thermal_psu2.dev_attr.attr,
|
|
|
|
|
|
//pwm
|
|
&sensor_dev_attr_pwm1.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3.dev_attr.attr,
|
|
&sensor_dev_attr_pwm4.dev_attr.attr,
|
|
&sensor_dev_attr_pwm_psu1.dev_attr.attr,
|
|
&sensor_dev_attr_pwm_psu2.dev_attr.attr,
|
|
|
|
//rpm
|
|
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan4_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan5_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan6_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan7_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan8_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_rpm_psu1.dev_attr.attr,
|
|
&sensor_dev_attr_rpm_psu2.dev_attr.attr,
|
|
|
|
//switch temperature
|
|
&sensor_dev_attr_switch_tmp.dev_attr.attr,
|
|
&sensor_dev_attr_temp6_input.dev_attr.attr,
|
|
//diag flag
|
|
&sensor_dev_attr_diag.dev_attr.attr,
|
|
|
|
//version
|
|
&sensor_dev_attr_version.dev_attr.attr,
|
|
|
|
//fan led
|
|
&sensor_dev_attr_fan_led_grn1.dev_attr.attr,
|
|
&sensor_dev_attr_fan_led_grn2.dev_attr.attr,
|
|
&sensor_dev_attr_fan_led_grn3.dev_attr.attr,
|
|
&sensor_dev_attr_fan_led_grn4.dev_attr.attr,
|
|
&sensor_dev_attr_fan_led_red1.dev_attr.attr,
|
|
&sensor_dev_attr_fan_led_red2.dev_attr.attr,
|
|
&sensor_dev_attr_fan_led_red3.dev_attr.attr,
|
|
&sensor_dev_attr_fan_led_red4.dev_attr.attr,
|
|
|
|
//fan GPI
|
|
&sensor_dev_attr_fan_gpi.dev_attr.attr,
|
|
&sensor_dev_attr_psu0.dev_attr.attr,
|
|
&sensor_dev_attr_psu1.dev_attr.attr,
|
|
|
|
|
|
//psu_psoc
|
|
&sensor_dev_attr_psoc_psu1_vin.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu1_vout.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu1_iin.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu1_iout.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu1_pin.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu1_pout.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu2_vin.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu2_vout.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu2_iin.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu2_iout.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu2_pin.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu2_pout.dev_attr.attr,
|
|
|
|
// Add new fields which matching standard
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_curr1_input.dev_attr.attr,
|
|
&sensor_dev_attr_curr2_input.dev_attr.attr,
|
|
&sensor_dev_attr_power1_input.dev_attr.attr,
|
|
&sensor_dev_attr_power2_input.dev_attr.attr,
|
|
|
|
//ipmi_i2c_command
|
|
&sensor_dev_attr_thermal2_psu1.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu1_vender.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu1_serial.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu1_version.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_thermal2_psu2.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu2_vender.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu2_serial.dev_attr.attr,
|
|
&sensor_dev_attr_psoc_psu2_version.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_name.dev_attr.attr,
|
|
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group psoc_group = {
|
|
.attrs = psoc_attributes,
|
|
};
|
|
|
|
static int __init inv_psoc_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk("+%s\n", __func__);
|
|
|
|
hwmon_dev = hwmon_device_register(NULL);
|
|
if (IS_ERR(hwmon_dev)) {
|
|
goto fail_hwmon_device_register;
|
|
}
|
|
|
|
ret = sysfs_create_group(&hwmon_dev->kobj, &psoc_group);
|
|
if (ret) {
|
|
goto fail_create_group_hwmon;
|
|
}
|
|
|
|
printk(" Enable IPMI PSoC protocol.\n");
|
|
return ret;
|
|
|
|
fail_create_group_hwmon:
|
|
hwmon_device_unregister(hwmon_dev);
|
|
fail_hwmon_device_register:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void __exit inv_psoc_exit(void)
|
|
{
|
|
sysfs_remove_group(&hwmon_dev->kobj, &psoc_group);
|
|
|
|
if(ipmi_mh_user!=NULL) {ipmi_destroy_user(ipmi_mh_user);}
|
|
if(hwmon_dev != NULL) hwmon_device_unregister(hwmon_dev);
|
|
}
|
|
|
|
MODULE_AUTHOR("Ting.Jack <ting.jack@inventec>");
|
|
MODULE_DESCRIPTION("inv psoc driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(inv_psoc_init);
|
|
module_exit(inv_psoc_exit);
|
|
|