ced3b3f310
Add support for Accton as9726-32d platform This pull request is based on as9716-32d, so I reference as9716-32d to create new model: as9726-32d. This module do not need led driver to control led, FPGA can handle it. I also implement API2.0(sonic_platform) for this model, CPLD driver, PSU driver, Fan driver to control these HW behavior.
294 lines
8.5 KiB
Python
Executable File
294 lines
8.5 KiB
Python
Executable File
# sfputil.py
|
|
#
|
|
# Platform-specific SFP transceiver interface for SONiC
|
|
#
|
|
|
|
try:
|
|
import time
|
|
from ctypes import create_string_buffer
|
|
from sonic_sfp.sfputilbase import SfpUtilBase
|
|
except ImportError as e:
|
|
raise ImportError("%s - required module not found" % str(e))
|
|
|
|
|
|
class SfpUtil(SfpUtilBase):
|
|
"""Platform-specific SfpUtil class"""
|
|
|
|
PORT_START = 1
|
|
QSFP_PORT_END = 32
|
|
PORT_END = 34
|
|
PORTS_IN_BLOCK = 34
|
|
|
|
BASE_OOM_PATH = "/sys/bus/i2c/devices/{0}-0050/"
|
|
BASE_CPLD2_PATH = "/sys/bus/i2c/devices/10-0061/"
|
|
BASE_CPLD3_PATH = "/sys/bus/i2c/devices/10-0062/"
|
|
|
|
_port_to_is_present = {}
|
|
_port_to_lp_mode = {}
|
|
|
|
_port_to_eeprom_mapping = {}
|
|
_port_to_i2c_mapping = {
|
|
1: 17,
|
|
2: 18,
|
|
3: 19,
|
|
4: 20,
|
|
5: 21,
|
|
6: 22,
|
|
7: 23,
|
|
8: 24,
|
|
9: 25,
|
|
10: 26,
|
|
11: 27,
|
|
12: 28,
|
|
13: 29,
|
|
14: 30,
|
|
15: 31,
|
|
16: 32,
|
|
17: 33,
|
|
18: 34,
|
|
19: 35,
|
|
20: 36,
|
|
21: 37,
|
|
22: 38,
|
|
23: 39,
|
|
24: 40,
|
|
25: 41,
|
|
26: 42,
|
|
27: 43,
|
|
28: 44,
|
|
29: 45,
|
|
30: 46,
|
|
31: 47,
|
|
32: 48,
|
|
33: 49,
|
|
34: 50,
|
|
}
|
|
|
|
@property
|
|
def port_start(self):
|
|
return self.PORT_START
|
|
|
|
@property
|
|
def port_end(self):
|
|
return self.PORT_END
|
|
|
|
@property
|
|
def qsfp_ports(self):
|
|
return list(range(self.PORT_START, self.PORTS_IN_BLOCK - 1))
|
|
|
|
@property
|
|
def port_to_eeprom_mapping(self):
|
|
return self._port_to_eeprom_mapping
|
|
|
|
def __init__(self):
|
|
eeprom_path = self.BASE_OOM_PATH + "eeprom"
|
|
|
|
for x in range(self.port_start, self.port_end+1):
|
|
self.port_to_eeprom_mapping[x] = eeprom_path.format(
|
|
self._port_to_i2c_mapping[x]
|
|
)
|
|
|
|
SfpUtilBase.__init__(self)
|
|
|
|
def __write_txt_file(self, file_path, value):
|
|
try:
|
|
reg_file = open(file_path, "w")
|
|
except IOError as e:
|
|
print("Error: unable to open file: %s" % str(e))
|
|
return False
|
|
|
|
reg_file.write(str(value))
|
|
reg_file.close()
|
|
|
|
return True
|
|
|
|
def get_presence(self, port_num):
|
|
if port_num <= 16:
|
|
present_path = self.BASE_CPLD2_PATH + "module_present_" + str(port_num)
|
|
else:
|
|
present_path = self.BASE_CPLD3_PATH + "module_present_" + str(port_num)
|
|
self.__port_to_is_present = present_path
|
|
|
|
try:
|
|
val_file = open(present_path)
|
|
content = val_file.readline().rstrip()
|
|
val_file.close()
|
|
except IOError as e:
|
|
print("Error: unable to access file: %s" % str(e))
|
|
return False
|
|
|
|
if content == "1":
|
|
return True
|
|
|
|
return False
|
|
|
|
def get_low_power_mode(self, port_num):
|
|
if port_num > self.QSFP_PORT_END: #sfp not support lpmode
|
|
return False
|
|
try:
|
|
eeprom = None
|
|
|
|
if not self.get_presence(port_num):
|
|
return False
|
|
|
|
eeprom = open(self.port_to_eeprom_mapping[port_num], "rb")
|
|
eeprom.seek(93)
|
|
lpmode = ord(eeprom.read(1))
|
|
|
|
if ((lpmode & 0x3) == 0x3):
|
|
return True # Low Power Mode if "Power override" bit is 1 and "Power set" bit is 1
|
|
else:
|
|
# High Power Mode if one of the following conditions is matched:
|
|
# 1. "Power override" bit is 0
|
|
# 2. "Power override" bit is 1 and "Power set" bit is 0
|
|
return False
|
|
except IOError as e:
|
|
print("Error: unable to open file: %s" % str(e))
|
|
return False
|
|
finally:
|
|
if eeprom is not None:
|
|
eeprom.close()
|
|
time.sleep(0.01)
|
|
|
|
def set_low_power_mode(self, port_num, lpmode):
|
|
# Check for invalid port_num
|
|
if port_num > self.QSFP_PORT_END: #sfp not support lpmode:
|
|
return False
|
|
|
|
try:
|
|
eeprom = None
|
|
if not self.get_presence(port_num):
|
|
return False # Port is not present, unable to set the eeprom
|
|
|
|
# Fill in write buffer
|
|
# 0x3:Low Power Mode. "Power override" bit is 1 and "Power set" bit is 1
|
|
# 0x9:High Power Mode. "Power override" bit is 1 ,"Power set" bit is 0 and "High Power Class Enable" bit is 1
|
|
regval = 0x3 if lpmode else 0x9
|
|
|
|
buffer = create_string_buffer(1)
|
|
buffer[0] = regval
|
|
|
|
# Write to eeprom
|
|
eeprom = open(self.port_to_eeprom_mapping[port_num], "r+b")
|
|
eeprom.seek(93)
|
|
eeprom.write(buffer[0])
|
|
return True
|
|
except IOError as e:
|
|
print("Error: unable to open file: %s" % str(e))
|
|
return False
|
|
finally:
|
|
if eeprom is not None:
|
|
eeprom.close()
|
|
time.sleep(0.01)
|
|
|
|
def reset(self, port_num):
|
|
if port_num > self.QSFP_PORT_END: #sfp not support lpmode:
|
|
return False
|
|
if not self.get_presence(port_num):
|
|
return False # Port is not present, unable to set reset
|
|
|
|
if port_num < 16:
|
|
mod_rst_path = self.BASE_CPLD2_PATH + "module_reset_" + str(port_num)
|
|
else:
|
|
mod_rst_path = self.BASE_CPLD3_PATH + "module_reset_" + str(port_num)
|
|
|
|
self.__port_to_mod_rst = mod_rst_path
|
|
|
|
ret = self.__write_txt_file(self.__port_to_mod_rst, 1)
|
|
if ret is not True:
|
|
return ret
|
|
|
|
time.sleep(0.2)
|
|
ret = self.__write_txt_file(self.__port_to_mod_rst, 0)
|
|
time.sleep(0.2)
|
|
|
|
return ret
|
|
|
|
def get_cpld_interrupt(self):
|
|
port_dict = {}
|
|
for i in range(0, 4):
|
|
if i == 0 or i == 1:
|
|
cpld_i2c_path = self.BASE_CPLD2_PATH + "cpld_intr_" + str(i+1)
|
|
else:
|
|
cpld_i2c_path = self.BASE_CPLD3_PATH + "cpld_intr_" + str(i+1)
|
|
|
|
start_i = (i*8)
|
|
end_i = (i*8+8)
|
|
try:
|
|
val_file = open(cpld_i2c_path)
|
|
except IOError as e:
|
|
print("Error: unable to open file: %s" % str(e))
|
|
|
|
for k in range(start_i, end_i):
|
|
port_dict[k] = 0
|
|
return port_dict
|
|
|
|
status = val_file.readline().rstrip()
|
|
val_file.close()
|
|
status = status.strip()
|
|
status = int(status, 16)
|
|
|
|
interrupt_status = ~(status & 0xff)
|
|
if interrupt_status:
|
|
port_shift = 0
|
|
for k in range(start_i, end_i):
|
|
if interrupt_status & (0x1 << port_shift):
|
|
port_dict[k] = 1
|
|
else:
|
|
port_dict[k] = 0
|
|
port_shift = port_shift+1
|
|
|
|
return port_dict
|
|
|
|
def get_transceiver_change_event(self, timeout=0):
|
|
start_time = time.time()
|
|
port_dict = {}
|
|
forever = False
|
|
|
|
if timeout == 0:
|
|
forever = True
|
|
elif timeout > 0:
|
|
timeout = timeout / float(1000) # Convert to secs
|
|
else:
|
|
print("get_transceiver_change_event:Invalid timeout value", timeout)
|
|
return False, {}
|
|
|
|
end_time = start_time + timeout
|
|
if start_time > end_time:
|
|
print('get_transceiver_change_event:'
|
|
'time wrap / invalid timeout value', timeout)
|
|
|
|
return False, {} # Time wrap or possibly incorrect timeout
|
|
|
|
# for i in range(self.port_start, self.port_end+1):
|
|
# ori_present[i]=self.get_presence(i)
|
|
|
|
while timeout >= 0:
|
|
change_status = 0
|
|
|
|
port_dict = self.get_cpld_interrupt()
|
|
present = 0
|
|
for key, value in port_dict.items():
|
|
if value == 1:
|
|
present = self.get_presence(key)
|
|
change_status = 1
|
|
if present:
|
|
port_dict[key] = '1'
|
|
else:
|
|
port_dict[key] = '0'
|
|
|
|
if change_status:
|
|
return True, port_dict
|
|
if forever:
|
|
time.sleep(1)
|
|
else:
|
|
timeout = end_time - time.time()
|
|
if timeout >= 1:
|
|
time.sleep(1) # We poll at 1 second granularity
|
|
else:
|
|
if timeout > 0:
|
|
time.sleep(timeout)
|
|
return True, {}
|
|
print("get_evt_change_event: Should not reach here.")
|
|
return False, {}
|