695652c9d1
This is a 1RU switch with 32 QSFP28 (40G/100G) ports on Broadcom Tomahawk I chipset. CPU used in QFX5200-32C-S is Intel Ivy Bridge. The machine has Redundant and hot-swappable Power Supply (1+1) and also has Redundant and hot swappable fans (5). Signed-off-by: Ciju Rajan K <crajank@juniper.net> Signed-off-by: Ashish Bhensdadia <bashish@juniper.net>
118 lines
3.9 KiB
Plaintext
Executable File
118 lines
3.9 KiB
Plaintext
Executable File
|
|
Copyright (c) 2019, Juniper Networks, Inc.
|
|
All rights reserved.
|
|
|
|
Front panel LEDs
|
|
================
|
|
There are 4 system LEDs in the front panel. Master, System, Alarm, & Beacon.
|
|
LED controls can be found under /sys/class/leds. The sysfs interface &
|
|
colour mappings are as follows:
|
|
|
|
For master LED: /sys/class/leds/master/brightness
|
|
0 => off
|
|
1 => green
|
|
|
|
For system LED: /sys/class/leds/system/brightness
|
|
0 => off
|
|
1 => green
|
|
|
|
For alarm LED: /sys/class/leds/alarm/brightness
|
|
0 => off
|
|
1 => amber
|
|
2 => red
|
|
|
|
For beacon LED: /sys/class/leds/beacon/brightness
|
|
0 => off
|
|
1 => blue
|
|
|
|
For any of the above LEDs, max_brightness file can tell the maximum value
|
|
accepted.
|
|
|
|
System FANs
|
|
===========
|
|
There are 4 fans and each of the fan has 2 fan modules. Overall there are
|
|
8 fans in the system.
|
|
|
|
Fan controls can be found in /sys/bus/i2c/devices/17-0068. All the fans
|
|
are controlled by one duty cycle value, ranges from 0 to 100
|
|
|
|
Fan duty cycle can be controlled through /sys/bus/i2c/devices/17-0068/pwm1
|
|
|
|
Fan module presence is given by /sys/bus/i2c/devices/17-0068/fan[1-4]_present
|
|
file. A value of '1' indicate that fan is present & a value of '0' otherwise.
|
|
|
|
Fan rotation direction is given by /sys/bus/i2c/devices/17-0068/fan[1-4]_direction.
|
|
A value of '0' indicate the direction is AFO (Front to back airflow) or Airflow
|
|
out. A value of '1' indicate that direction is AFI (Back to front airflow) or
|
|
Airflow in.
|
|
|
|
Fan speed is given by fan[1-4]_input
|
|
|
|
Temperature sensors
|
|
===================
|
|
There are 6 temperature sensors. The readings are available in
|
|
/sys/bus/i2c/devices/{0}-00{1}/hwmon/hwmon*/temp1_input
|
|
|
|
System PSUs
|
|
===========
|
|
There are two independent PSUs. These are controlled by a dedicated CPLD.
|
|
The status registers are mapped under /sys/bus/i2c/devices/9-0050 and
|
|
/sys/bus/i2c/devices/10-0053.
|
|
|
|
SFPs
|
|
====
|
|
There are 64 QSFP+ modules supported in qfx5210 platform. EEPORMs will be
|
|
mapped under /sys/bus/i2c/devices/[25-88]-0050/ sysfs directory.
|
|
|
|
FEC should be turned on for 100G SR optics and should be turned off for
|
|
100G LR optics. If the optic is changed, please update the entry and
|
|
reload the configuration. If the FEC mode is not set as per the optic
|
|
type the port may not link up or work properly.
|
|
|
|
As an example, see this configuration for FEC for 100G SR4 optics in
|
|
/etc/sonic/config_db.json
|
|
|
|
"Ethernet4": {
|
|
"admin_status": "up",
|
|
"alias": "Ethernet4",
|
|
"fec": "rs",
|
|
"index": "1",
|
|
"lanes": "65,66,67,68",
|
|
"mtu": "9100",
|
|
"speed": "100000"
|
|
}
|
|
|
|
Sensor details
|
|
==============
|
|
LM75 supported sensor modules will be available under 'sensors' command.
|
|
If you want to get all the sensor data including the SFPs & LEDs, you can
|
|
invoke 'sudo juniper_qfx5210_util.py show'
|
|
|
|
Platform poweroff
|
|
=================
|
|
Linux poweroff commands such as 'poweroff', 'shutdown', 'halt', etc. will not
|
|
power off qfx5210 platform as there are custom CPLDs control the power off
|
|
sequences. So acpi poweroff hooks are added for powering off the qfx5210. The
|
|
following messages are displayed in the console towards end of poweroff
|
|
sequence:
|
|
|
|
[ 52.500807] System halt/power_off
|
|
[ 52.866331] reboot: Power down
|
|
[ 52.903257] pm_power_off: qfx5210_cpld_power_off
|
|
|
|
Once the above messages are seen, you can safely remove the power to the system.
|
|
|
|
Similarly platform reboot sequences are in place for system reboot. The following
|
|
messages are displayed in the console when the system is rebooted:
|
|
|
|
[ 6053.163363] System restart: qfx5210_cpld_soft_reset
|
|
|
|
Platform monitoring daemon
|
|
==========================
|
|
“juniper_qfx5210_monitor.py” is the platform monitoring script.
|
|
It implements the qfx5210 EM policy. This script will run as system service
|
|
and monitor the temperature sensors in every 20 seconds. Based on the EM
|
|
policy thresholds, it controls the fan rpm, manage alarm leds, and
|
|
shutdown the box.
|
|
|