sonic-buildimage/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/bf_kdrv.c
Sagar Balani 93905d3d82 [barefoot]: Support for platforms based on Barefoot Networks' device (#1796)
* Initial commit

* Add Ingrasys S9180-32X platform dirver.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn.service for init barefoot.

Signed-off-by: Wade He <chihen.he@gmail.com>

* [Barefoot Beta] Add some functions and fixed some bugs.

1. Update sensors.conf.
2. Fixed IO expander init.
3. Fixed PSU EEPROM.
4. Fixed MB EEPROM.
5. Add fancontrol and fan init.
6. Add SYS LED control (sys, fan, fan tray).
7. 2.5V compute and setup max and min.
8. Fixed typo MB eeprom delete address.
9. Remove coretemp to BMC.
10. Add active CPLD.
11. Modify SFP+ GPIO slave address.
12. Modify tmp75 Near Port 32 slave address.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn script in /etc/init.d/

Signed-off-by: Wade He <chihen.he@gmail.com>

* Add bfn service in debian

Signed-off-by: Wade He <chihen.he@gmail.com>

* Fixed CPLD switch LED behavior.

Signed-off-by: Wade He <chihen.he@gmail.com>

* [Barefoot Beta] Fixed sensors and hwmon order.
1. Fixed ignore sensors Vbat.
2. Reorg hwmon order.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Fixed PSU1 and PSU2 EEPROM order.

Signed-off-by: Wade He <chihen.he@gmail.com>

* initial barefoot checkin october 2017

* update refpoint

* update refpoints

* update refpoints to bf-master

* update refpoint

* update refpoint to tested version

* change to platform from asic

* update refpoint for swss

* revert core creation setting

* update refpoints

* add telnet for debug shell

* update refpoints 11/17/17

* missed change in file on previous merge

* [CPLD] Fixed blink LED issue.

* Fixed blink LED mask set error.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Update bf_kdrv.c for 6.0.2.39

* Update bf kernel driver

* Add bf_fun kernel module.

* Update bf_tun for fixed build error

* merge with Azure master (12/12/17)

* update swss refpoint

* update refpoint of swss

* library dependency for stack unroll

* update refpoint to bf-master

* [DHCP relay]: Fix circuit ID and remote ID bugs (#1248)

* [DHCP relay]: Fix circuit ID and remote ID bugs

* Set circuit_id_len after setting circuit_id_len to ip->name

* [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272)

* Add I2C CPLD kernel module for psuutil.
 * Support psuutil script.
 * Add voltage min and max threshold.
 * Update sensors.conf for tmp75.

Signed-off-by: Wade He <chihen.he@gmail.com>

* Allow multi platform support - infra (more changes to follow)

* update relative path to include platform for clarity

* [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274)

- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X

- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
Update Head of submodule src/sonic-sairedis to "3b817bb"

- How to verify it
To build SONiC installer image and docker images, run the following commands:

make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well

- Description for the changelog
Add switch ASIC vendor and platforms for Nephos

- A picture of a cute animal (not mandatory but encouraged)

Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>

* change source of files to github (from dropbox), update sairedis refpoint

* update refpoint of sairedis

* [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board   (#1269)

* [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287)

* update sairedis (fast-boot refpoint)

* fix syncd rpc make files

* update refpoint to handle Makefile change (no functional change)

* [Marvell]: Add support for SLM5401-54x device (#1307)

* Marvell's updates for SONiC.201712 & SAI v1.0
* [Platform] Add Marvell's SLM5401-54x for branch 201712

* [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321)

- update Arista 7050-QX32S config.bcm file
- update Accton th-as771*-32x100G.config.bcm files

* update refpoint for Makefile chnage in sairedis

* update refpoint - sairedis

* update sairedis to older refpoint till we debug clean build

* export asic platform for build

* update refpoint for makefiles

* [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332)

* Upload wnc-osw1800

* Modify for Barefoot suggest

* Revert bfn-platform.mk

* Update bfn-platform-wnc.mk

Update parameter name

* Update parameter name

* initial support for WNC platform

* change switch name to "switch"

* Delete bf modules for rel_7_0

* Add Ingrasys S9180 platform

Signed-off-by: Wade He <chihen.he@gmail.com>

* Modify bfnsdk for Ingrasys S9180 platform

Signed-off-by: Wade He <chihen.he@gmail.com>

* Resolved the conflict.

* Resolved the conflict.

* Update submodule path and url.

* Delete unused file.

* Update PSU GPIO and EEPROM for psuutil.

* Add psuutil in S9180-32X

Signed-off-by: Wade He <chihen.he@gmail.com>

* update refpoint

* update refpoint

* change contact email, update refpoint

* cleanup and update kernel modules

* updates based on review

* update refpoint

* update refpoint

* fix typo in config script to check for platforms

* remove stale file

* resolve conflicts

* cleanup diffs with Azure repo and update SDK debs

* update refpoints to Azure

* address review comments

* revert refpoint of swss-common

* porting the build fix from master

* porting build fix from master

* Minor Fix

* Minor fix

* Temp to sde deb packages url

* Update sonic - sairedis,swss & swss-common refpoints

* Update git modules url path to bfn repo

* updated paths for swss, swss-common & sairedis

* Update refpoint for sonic-swss to local bfn repo

* Update URL for downloading sde debian packages

* porting fix links of debian git server from master

* porting fix links of debian git server from master

* [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC

* Update ref points for swss, swss-common and sairedis repos

* Add sonic platform scripts for bfn montara/maverick

* Call sh scripts instead of calling py scripts

* Address upstream PR Comments (#10)

* Update bf-master with azure/master
* Undo changes to some files

* Revert "Address upstream PR Comments (#10)"

This reverts commit a7fddb83ca.

* Address upstream comments (#11)

* Remove all non bfn specific changes from upstream PR

* Revert "Address upstream comments (#11)"

This reverts commit 559132103e.

* Undo non bfn changes

* Little more cleanup

* Add back code removed in merge

* export CONFIGURED_PLATFORM

* Update sairedis and swss refpoints

* Address Upstream PR comment

* change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64

* Set default tx queue len for usb0 interface to 64

* Update sairedis refpoint

* Update swss ref point

* Add bfn buffer cfg files for montara/maverick as per new design

* Update buffer cfg templates for bfn montara

* add non zero size to buffer profile
* add macro to generate port lists

* Update buffer cfg templates for bfn mavericks

* add non zero size for buffer profiles
* add port generation macro

* Add missing psmisc package

* BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions.
Adding psmisc to resolve this issue.

* Update swss ref point

* Update swss ref point

* Update sairedis refpoint

* Update sairedis refpoint

* Update sairedis refpoint

* Update sairedis refpoint

* Update refpoint for sairedis and swss

* sairedis to azure master
* swss to latest bfn bf-master

* Update gitmodules

Update url for sairedis to azure master

* Correct typo in bfn platform script

* Update swss and sairedis ref points

* Update swss ref point

* Address Review comments

* Update swws path in gitmodules to azure master
* update swss refpoint
* update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR)

* Fix sairedis refpoint broken in by previous merge

* Remove psmisc from docker base image

* This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session.
Will fix this in a seperate PR. Need this for SONIC upstreaming

* Address upstream comments

* Remove bmc interface from interface jinja template and sample output interfaces file
* Add bmc interface at boot time to network interfaces for bfn bmc based platforms

* Remove autogen ingrasys debian files

* Revert "Remove autogen ingrasys debian files"

* Buffer and qos config template fix for bfn platforms (#21)

SWI-1509 Buffer and qos config template fix for bfn platforms

* Fix qos config files for montara & mavericks (#22)

* Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs

* Fix vs test (#23)
2018-07-24 10:23:12 -07:00

1255 lines
34 KiB
C

/*******************************************************************************
* BAREFOOT NETWORKS CONFIDENTIAL & PROPRIETARY
*
* Copyright (c) 2015-2016 Barefoot Networks, Inc.
* All Rights Reserved.
*
* NOTICE: All information contained herein is, and remains the property of
* Barefoot Networks, Inc. and its suppliers, if any. The intellectual and
* technical concepts contained herein are proprietary to Barefoot Networks,
* Inc.
* and its suppliers and may be covered by U.S. and Foreign Patents, patents in
* process, and are protected by trade secret or copyright law.
* Dissemination of this information or reproduction of this material is
* strictly forbidden unless prior written permission is obtained from
* Barefoot Networks, Inc.
*
* No warranty, explicit or implicit is provided, unless granted under a
* written agreement with Barefoot Networks, Inc.
*
* $Id: $
*
******************************************************************************/
/**
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2015 Barefoot Networks. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the...
*
**/
/* bf_drv kernel module
*
* This is kernel mode driver for Tofino chip.
* Provides user space mmap service and user space "wait for interrupt"
* and "enable interrupt" services.
*/
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/msi.h>
#include <linux/version.h>
#include <linux/wait.h>
#include <linux/poll.h>
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 11, 0)
#include <linux/sched/signal.h>
#else
#include <linux/sched.h>
#endif
#include <linux/cdev.h>
#include <linux/aer.h>
#include <linux/string.h>
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 16, 0)
//#error unsupported linux kernel version
#endif
/* TBD: Need to build with CONFIG_PCI_MSI */
extern int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec);
extern int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, int minvec, int maxvec);
#define PCI_VENDOR_ID_BF 0x1d1c
#define TOFINO_DEV_ID_A0 0x01
#define TOFINO_DEV_ID_B0 0x10
#ifndef PCI_MSIX_ENTRY_SIZE
#define PCI_MSIX_ENTRY_SIZE 16
#define PCI_MSIX_ENTRY_LOWER_ADDR 0
#define PCI_MSIX_ENTRY_UPPER_ADDR 4
#define PCI_MSIX_ENTRY_DATA 8
#define PCI_MSIX_ENTRY_VECTOR_CTRL 12
#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1
#endif
#define BF_CLASS_NAME "bf"
#define BF_MAX_DEVICE_CNT 256
#define BF_INTR_MODE_NONE_NAME "none"
#define BF_INTR_MODE_LEGACY_NAME "legacy"
#define BF_INTR_MODE_MSI_NAME "msi"
#define BF_INTR_MODE_MSIX_NAME "msix"
#define BF_MAX_BAR_MAPS 6
#define BF_MSIX_ENTRY_CNT 128 /* TBD make it 512 */
#define BF_MSI_ENTRY_CNT 2
/* interrupt mode */
enum bf_intr_mode {
BF_INTR_MODE_NONE = 0,
BF_INTR_MODE_LEGACY,
BF_INTR_MODE_MSI,
BF_INTR_MODE_MSIX
};
/* device memory */
struct bf_dev_mem {
const char *name;
phys_addr_t addr;
resource_size_t size;
void __iomem *internal_addr;
};
struct bf_listener {
struct bf_pci_dev *bfdev;
s32 event_count[BF_MSIX_ENTRY_CNT];
int minor;
struct bf_listener *next;
};
/* device information */
struct bf_dev_info {
struct module *owner;
struct device *dev;
int minor;
atomic_t event[BF_MSIX_ENTRY_CNT];
wait_queue_head_t wait;
const char *version;
struct bf_dev_mem mem[BF_MAX_BAR_MAPS];
struct msix_entry *msix_entries;
long irq; /* first irq vector */
int num_irq; /* number of irq vectors */
unsigned long irq_flags;/* sharable ?? */
int pci_error_state; /* was there a pci bus error */
};
/* cookie to be passed to IRQ handler, useful especially with MSIX */
struct bf_int_vector {
struct bf_pci_dev *bf_dev;
int int_vec_offset;
};
/**
* A structure describing the private information for a BF pcie device.
*/
struct bf_pci_dev {
struct bf_dev_info info;
struct pci_dev *pdev;
enum bf_intr_mode mode;
u8 instance;
char name[16];
struct bf_int_vector bf_int_vec[BF_MSIX_ENTRY_CNT];
struct bf_listener *listener_head; /* head of a singly linked list of
listeners */
};
/* Keep any global information here that must survive even after the
* bf_pci_dev is free-ed up.
*/
struct bf_global {
struct bf_pci_dev *bfdev ;
struct cdev *bf_cdev;
struct fasync_struct *async_queue;
};
static int bf_major;
static int bf_minor[BF_MAX_DEVICE_CNT] = {0};
static struct class *bf_class = NULL;
static char *intr_mode = NULL;
static enum bf_intr_mode bf_intr_mode_default = BF_INTR_MODE_MSI;
static spinlock_t bf_nonisr_lock;
/* dev->minor should index into this array */
static struct bf_global bf_global[BF_MAX_DEVICE_CNT];
static void bf_add_listener(struct bf_pci_dev *bfdev,
struct bf_listener *listener)
{
struct bf_listener **cur_listener = &bfdev->listener_head;
if (!listener) {
return;
}
spin_lock(&bf_nonisr_lock);
while (*cur_listener) {
cur_listener = &((*cur_listener)->next);
}
*cur_listener = listener;
listener->next = NULL;
spin_unlock(&bf_nonisr_lock);
}
static void bf_remove_listener(struct bf_pci_dev *bfdev,
struct bf_listener *listener)
{
struct bf_listener **cur_listener = &bfdev->listener_head;
/* in case of certain error conditions, this function might be called after bf_pci_remove()
*/
if (!bfdev || !listener) {
return;
}
spin_lock(&bf_nonisr_lock);
if (*cur_listener == listener) {
*cur_listener = listener->next;
} else {
while (*cur_listener) {
if ((*cur_listener)->next == listener) {
(*cur_listener)->next = listener->next;
break;
}
cur_listener = &((*cur_listener)->next);
}
listener->next = NULL;
}
spin_unlock(&bf_nonisr_lock);
}
/* a pool of minor numbers is maintained */
/* return the first available minor number */
static int bf_get_next_minor_no(int *minor)
{
int i;
spin_lock(&bf_nonisr_lock);
for(i = 0; i < BF_MAX_DEVICE_CNT; i++) {
if (bf_minor[i] == 0) {
*minor = i;
bf_minor[i] = 1; /* mark it as taken */
spin_unlock(&bf_nonisr_lock);
return 0;
}
}
*minor = -1;
spin_unlock(&bf_nonisr_lock);
return -1;
}
/* return a minor number back to the pool for recycling */
static int bf_return_minor_no(int minor)
{
int err;
spin_lock(&bf_nonisr_lock);
if (bf_minor[minor] == 0) { /* was already returned */
err = -1; /* don't change anything, but return error */
} else {
bf_minor[minor] = 0; /* mark it as available */
err = 0;
}
spin_unlock(&bf_nonisr_lock);
return err;
}
static inline struct bf_pci_dev *bf_get_pci_dev(struct bf_dev_info *info)
{
return container_of(info, struct bf_pci_dev, info);
}
/*
* It masks the msix on/off of generating MSI-X messages.
*/
static void
bf_msix_mask_irq(struct msi_desc *desc, int32_t state)
{
u32 mask_bits = desc->masked;
unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
PCI_MSIX_ENTRY_VECTOR_CTRL;
if (state != 0)
mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
else
mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT;
if (mask_bits != desc->masked) {
writel(mask_bits, desc->mask_base + offset);
readl(desc->mask_base);
desc->masked = mask_bits;
}
}
/**
* irqcontrol can be used to disable/enable interrupt from user space processes.
*
* @param bf_dev
* pointer to bf_pci_dev
* @param irq_state
* state value. 1 to enable interrupt, 0 to disable interrupt.
*
* @return
* - On success, 0.
* - On failure, a negative value.
*/
static int
bf_pci_irqcontrol(struct bf_pci_dev *bfdev, s32 irq_state)
{
struct pci_dev *pdev = bfdev->pdev;
pci_cfg_access_lock(pdev);
if (bfdev->mode == BF_INTR_MODE_LEGACY)
pci_intx(pdev, !!irq_state);
else if (bfdev->mode == BF_INTR_MODE_MSIX) {
struct msi_desc *desc;
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,2,0)
list_for_each_entry(desc, &pdev->msi_list, list)
bf_msix_mask_irq(desc, irq_state);
#else
for_each_pci_msi_entry(desc, pdev)
bf_msix_mask_irq(desc, irq_state);
#endif
}
pci_cfg_access_unlock(pdev);
return 0;
}
/**
* interrupt handler which will check if the interrupt is from the right
* device. If so, disable it here and will be enabled later.
*/
static irqreturn_t bf_pci_irqhandler(int irq, struct bf_pci_dev *bfdev)
{
/* Legacy mode need to mask in hardware */
if (bfdev->mode == BF_INTR_MODE_LEGACY &&
!pci_check_and_mask_intx(bfdev->pdev))
return IRQ_NONE;
/* NOTE : if bfdev->info.pci_error_state == 1, then do not access the
* device and return IRQ_NOTHANDLED.
*/
/* Message signal mode, no share IRQ and automasked */
return IRQ_HANDLED;
}
/* Remap pci resources described by bar #pci_bar */
static int
bf_pci_setup_iomem(struct pci_dev *dev, struct bf_dev_info *info,
int n, int pci_bar, const char *name)
{
unsigned long addr, len;
void *internal_addr;
if (sizeof(info->mem) / sizeof(info->mem[0]) <= n)
return -EINVAL;
addr = pci_resource_start(dev, pci_bar);
len = pci_resource_len(dev, pci_bar);
if (addr == 0 || len == 0)
return -1;
internal_addr = pci_ioremap_bar(dev, pci_bar);
if (internal_addr == NULL)
return -1;
info->mem[n].name = name;
info->mem[n].addr = addr;
info->mem[n].internal_addr = internal_addr;
info->mem[n].size = len;
return 0;
}
/* Unmap previously ioremap'd resources */
static void
bf_pci_release_iomem(struct bf_dev_info *info)
{
int i;
for (i = 0; i < BF_MAX_BAR_MAPS; i++) {
if (info->mem[i].internal_addr)
iounmap(info->mem[i].internal_addr);
}
}
static int
bf_setup_bars(struct pci_dev *dev, struct bf_dev_info *info)
{
int i, iom, ret;
unsigned long flags;
static const char *bar_names[BF_MAX_BAR_MAPS] = {
"BAR0", "BAR1", "BAR2", "BAR3", "BAR4", "BAR5",
};
iom = 0;
for (i = 0; i < BF_MAX_BAR_MAPS; i++) {
if (pci_resource_len(dev, i) != 0 &&
pci_resource_start(dev, i) != 0) {
flags = pci_resource_flags(dev, i);
if (flags & IORESOURCE_MEM) {
ret = bf_pci_setup_iomem(dev, info, iom, i, bar_names[i]);
if (ret != 0)
return ret;
iom++;
}
}
}
return (iom != 0) ? ret : -ENOENT;
}
static irqreturn_t bf_interrupt(int irq, void *bfdev_id)
{
struct bf_pci_dev *bfdev = ((struct bf_int_vector *)bfdev_id)->bf_dev;
int vect_off = ((struct bf_int_vector *)bfdev_id)->int_vec_offset;
irqreturn_t ret = bf_pci_irqhandler(irq, bfdev);
if (ret == IRQ_HANDLED)
atomic_inc(&(bfdev->info.event[vect_off]));
return ret;
}
static unsigned int bf_poll(struct file *filep, poll_table *wait)
{
struct bf_listener *listener = (struct bf_listener *)filep->private_data;
struct bf_pci_dev *bfdev = listener->bfdev;
int i;
if (!bfdev) {
return -ENODEV;
}
if (!bfdev->info.irq)
return -EIO;
poll_wait(filep, &bfdev->info.wait, wait);
for (i = 0; i < BF_MSIX_ENTRY_CNT; i++)
if (listener->event_count[i] != atomic_read(&bfdev->info.event[i]))
return POLLIN | POLLRDNORM;
return 0;
}
static int bf_find_mem_index(struct vm_area_struct *vma)
{
struct bf_pci_dev *bfdev = vma->vm_private_data;
if (vma->vm_pgoff < BF_MAX_BAR_MAPS) {
if (bfdev->info.mem[vma->vm_pgoff].size == 0)
return -1;
return (int)vma->vm_pgoff;
}
return -1;
}
static const struct vm_operations_struct bf_physical_vm_ops = {
#ifdef CONFIG_HAVE_IOREMAP_PROT
.access = generic_access_phys,
#endif
};
static int bf_mmap_physical(struct vm_area_struct *vma)
{
struct bf_pci_dev *bfdev = vma->vm_private_data;
int bar = bf_find_mem_index(vma);
struct bf_dev_mem *mem;
if (bar < 0)
return -EINVAL;
mem = bfdev->info.mem + bar;
if (mem->addr & ~PAGE_MASK)
return -ENODEV;
if (vma->vm_end - vma->vm_start > mem->size)
return -EINVAL;
vma->vm_ops = &bf_physical_vm_ops;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
/*
* We cannot use the vm_iomap_memory() helper here,
* because vma->vm_pgoff is the map index we looked
* up above in bf_find_mem_index(), rather than an
* actual page offset into the mmap.
*
* So we just do the physical mmap without a page
* offset.
*/
return remap_pfn_range(vma, vma->vm_start, mem->addr >> PAGE_SHIFT,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
static int bf_mmap(struct file *filep, struct vm_area_struct *vma)
{
struct bf_listener *listener = filep->private_data;
struct bf_pci_dev *bfdev = listener->bfdev;
int bar;
unsigned long requested_pages, actual_pages;
if (!bfdev) {
return -ENODEV;
}
if (vma->vm_end < vma->vm_start)
return -EINVAL;
vma->vm_private_data = bfdev;
bar = bf_find_mem_index(vma);
if (bar < 0)
return -EINVAL;
requested_pages = vma_pages(vma);
actual_pages = ((bfdev->info.mem[bar].addr & ~PAGE_MASK)
+ bfdev->info.mem[bar].size + PAGE_SIZE -1) >> PAGE_SHIFT;
if (requested_pages > actual_pages)
return -EINVAL;
return bf_mmap_physical(vma);
}
static int bf_fasync(int fd, struct file *filep, int mode)
{
int minor;
if (!filep->private_data) {
return (-EINVAL);
}
minor = ((struct bf_listener *)filep->private_data)->minor;
if (minor >= BF_MAX_DEVICE_CNT) {
return (-EINVAL);
}
if (mode == 0 && &bf_global[minor].async_queue == NULL) {
return 0; /* nothing to do */
}
return (fasync_helper(fd, filep, mode, &bf_global[minor].async_queue));
}
static int bf_open(struct inode *inode, struct file *filep)
{
struct bf_pci_dev *bfdev;
struct bf_listener *listener;
int i;
bfdev = bf_global[iminor(inode)].bfdev;
listener = kmalloc(sizeof(*listener), GFP_KERNEL);
if (listener) {
listener->bfdev = bfdev;
listener->minor = bfdev->info.minor;
listener->next = NULL;
bf_add_listener(bfdev, listener);
for (i = 0; i < BF_MSIX_ENTRY_CNT; i++)
listener->event_count[i] = atomic_read(&bfdev->info.event[i]);
filep->private_data = listener;
return 0;
} else {
return(-ENOMEM);
}
}
static int bf_release(struct inode *inode, struct file *filep)
{
struct bf_listener *listener = filep->private_data;
bf_fasync(-1, filep, 0); /* empty any process id in the notification list */
if (listener->bfdev) {
bf_remove_listener(listener->bfdev, listener);
}
kfree(listener);
return 0;
}
/* user space support: make read() system call after poll() of select() */
static ssize_t bf_read(struct file *filep, char __user *buf,
size_t count, loff_t *ppos)
{
struct bf_listener *listener = filep->private_data;
struct bf_pci_dev *bfdev = listener->bfdev;
int retval, event_count[BF_MSIX_ENTRY_CNT];
int i, mismatch_found = 0; /* OR of per vector mismatch */
unsigned char cnt_match[BF_MSIX_ENTRY_CNT]; /* per vector mismatch */
if (!bfdev) {
return -ENODEV;
}
/* irq must be setup for read() to work */
if (!bfdev->info.irq)
return -EIO;
/* ensure that there is enough space on user buffer for the given interrupt
* mode */
if (bfdev->mode == BF_INTR_MODE_MSIX) {
if (count < sizeof(s32)*BF_MSIX_ENTRY_CNT)
return -EINVAL;
count = sizeof(s32)*BF_MSIX_ENTRY_CNT;
} else if (bfdev->mode == BF_INTR_MODE_MSI) {
if (count < sizeof(s32)*BF_MSI_ENTRY_CNT)
return -EINVAL;
count = sizeof(s32)*BF_MSI_ENTRY_CNT;
} else {
if (count < sizeof(s32))
return -EINVAL;
count = sizeof(s32);
}
do {
set_current_state(TASK_INTERRUPTIBLE);
for (i = 0; i < (count/sizeof(s32)); i++) {
event_count[i] = atomic_read(&(bfdev->info.event[i]));
if (event_count[i] != listener->event_count[i]) {
mismatch_found |= 1;
cnt_match[i] = 1;
} else {
event_count[i] = 0;
cnt_match[i] = 0;
}
}
if (mismatch_found) {
__set_current_state(TASK_RUNNING);
if (copy_to_user(buf, &event_count, count))
retval = -EFAULT;
else { /* adjust the listener->event_count; */
for (i = 0 ; i < (count/sizeof(s32)); i++) {
if (cnt_match[i]) {
listener->event_count[i] = event_count[i];
}
}
retval = count;
}
break;
}
if (filep->f_flags & O_NONBLOCK) {
retval = -EAGAIN;
break;
}
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
}
schedule();
} while (1);
__set_current_state(TASK_RUNNING);
return retval;
}
/* user space is supposed to call this after it is done with interrupt
* processing
*/
static ssize_t bf_write(struct file *filep, const char __user *buf,
size_t count, loff_t *ppos)
{
struct bf_listener *listener = filep->private_data;
struct bf_pci_dev *bfdev = listener->bfdev;
ssize_t ret;
s32 int_en;
if (!bfdev || !bfdev->info.irq)
return -EIO;
if (count != sizeof(s32))
return -EINVAL;
if (copy_from_user(&int_en, buf, count))
return -EFAULT;
/* clear pci_error_state */
bfdev->info.pci_error_state = 0;
ret = bf_pci_irqcontrol(bfdev, int_en);
return ret ? ret : sizeof(s32);
}
static const struct file_operations bf_fops = {
.owner = THIS_MODULE,
.open = bf_open,
.release = bf_release,
.read = bf_read,
.write = bf_write,
.mmap = bf_mmap,
.poll = bf_poll,
.fasync = bf_fasync,
};
static int bf_major_init(struct bf_pci_dev *bfdev, int minor)
{
struct cdev *cdev;
static const char name[] = "bf";
dev_t bf_dev = 0;
int result;
result = alloc_chrdev_region(&bf_dev, 0, BF_MAX_DEVICE_CNT, name);
if (result)
return result;
result = -ENOMEM;
cdev = cdev_alloc();
if (!cdev) {
goto fail_dev_add;
}
cdev->ops = &bf_fops;
cdev->owner = THIS_MODULE;
kobject_set_name(&cdev->kobj, "%s", name);
result = cdev_add(cdev, bf_dev, BF_MAX_DEVICE_CNT);
if (result)
goto fail_dev_add;
bf_major = MAJOR(bf_dev);
bf_global[minor].bf_cdev = cdev;
return 0;
fail_dev_add:
unregister_chrdev_region(bf_dev, BF_MAX_DEVICE_CNT);
return result;
}
static void bf_major_cleanup(struct bf_pci_dev *bfdev, int minor)
{
unregister_chrdev_region(MKDEV(bf_major, 0), BF_MAX_DEVICE_CNT);
cdev_del(bf_global[minor].bf_cdev);
}
static int bf_init_cdev(struct bf_pci_dev *bfdev, int minor)
{
int ret;
ret = bf_major_init(bfdev, minor);
if (ret)
return ret;
bf_class = class_create(THIS_MODULE, BF_CLASS_NAME);
if (!bf_class) {
printk(KERN_ERR "create_class failed for bf_dev\n");
ret = -ENODEV;
goto err_class_register;
}
return 0;
err_class_register:
bf_major_cleanup(bfdev, minor);
return ret;
}
static void bf_remove_cdev(struct bf_pci_dev *bfdev)
{
class_destroy(bf_class);
bf_major_cleanup(bfdev, bfdev->info.minor);
}
/**
* bf_register_device - register a new userspace mem device
* @parent: parent device
* @bfdev: bf pci device
*
* returns zero on success or a negative error code.
*/
int bf_register_device(struct device *parent, struct bf_pci_dev *bfdev)
{
struct bf_dev_info *info = &bfdev->info;
int i, j, ret = 0;
int minor;
if (!parent || !info || !info->version)
return -EINVAL;
init_waitqueue_head(&info->wait);
for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) {
atomic_set(&info->event[i], 0);
}
if (bf_get_next_minor_no(&minor)) {
return -EINVAL;
}
ret = bf_init_cdev(bfdev, minor);
if (ret) {
printk(KERN_ERR "BF: device cdev creation failed\n");
return ret;
}
info->dev = device_create(bf_class, parent,
MKDEV(bf_major, minor), bfdev,
"bf%d", minor);
if (!info->dev) {
printk(KERN_ERR "BF: device creation failed\n");
return -ENODEV;
}
info->minor = minor;
/* bind ISRs and request interrupts */
if (info->irq && (bfdev->mode != BF_INTR_MODE_NONE)) {
/*
* Note that we deliberately don't use devm_request_irq
* here. The parent module can unregister the UIO device
* and call pci_disable_msi, which requires that this
* irq has been freed. However, the device may have open
* FDs at the time of unregister and therefore may not be
* freed until they are released.
*/
if (bfdev->mode == BF_INTR_MODE_LEGACY) {
ret = request_irq(info->irq, bf_interrupt,
info->irq_flags, bfdev->name,
(void *)&(bfdev->bf_int_vec[0]));
if (ret) {
printk(KERN_ERR "bf failed to request legacy irq %ld error %d\n",
info->irq, ret);
return ret;
}
printk(KERN_NOTICE "BF allocating legacy int vector %ld\n", info->irq);
} else if (bfdev->mode == BF_INTR_MODE_MSIX) {
for (i = 0; i < info->num_irq; i++) {
ret = request_irq(info->msix_entries[i].vector, bf_interrupt,
info->irq_flags, bfdev->name,
(void *)&(bfdev->bf_int_vec[i]));
if (ret) {
/* undo all other previous bindings */
printk(KERN_ERR "bf failed to request MSIX ret %d itr %d\n", ret, i);
for (j = i - 1; j >= 0; j--) {
free_irq(info->msix_entries[j].vector,
(void *)&(bfdev->bf_int_vec[j]));
}
return ret;
}
}
printk(KERN_NOTICE "BF allocating %d MSIx vectors from %ld\n",
info->num_irq, info->irq);
} else if (bfdev->mode == BF_INTR_MODE_MSI) {
for (i = 0; i < info->num_irq; i++) {
ret = request_irq(info->irq + i, bf_interrupt,
info->irq_flags, bfdev->name,
(void *)&(bfdev->bf_int_vec[i]));
if (ret) {
/* undo all other previous bindings */
printk(KERN_ERR "bf failed to request MSI ret %d itr %d\n", ret, i);
for (j = i - 1; j >= 0; j--) {
free_irq(info->irq + j, (void *)&(bfdev->bf_int_vec[j]));
}
return ret;
}
}
printk(KERN_NOTICE "BF allocating %d MSI vectors from %ld\n",
info->num_irq, info->irq);
}
}
return 0;
}
/**
* bf_unregister_device - register a new userspace mem device
* @bfdev: bf pci device
*
* returns none
*/
void bf_unregister_device(struct bf_pci_dev *bfdev)
{
struct bf_dev_info *info = &bfdev->info;
int i;
if (info->irq) {
if (bfdev->mode == BF_INTR_MODE_LEGACY) {
free_irq(info->irq, (void *)&(bfdev->bf_int_vec[0]));
} else if (bfdev->mode == BF_INTR_MODE_MSIX) {
for (i = 0; i < info->num_irq; i++) {
free_irq(info->msix_entries[i].vector, (void *)&(bfdev->bf_int_vec[i]));
}
} else if (bfdev->mode == BF_INTR_MODE_MSI) {
for (i = 0; i < info->num_irq; i++) {
free_irq(info->irq + i, (void *)&(bfdev->bf_int_vec[i]));
}
}
}
device_destroy(bf_class, MKDEV(bf_major, info->minor));
bf_remove_cdev(bfdev);
bf_return_minor_no(info->minor);
return;
}
static inline struct device *pci_dev_to_dev(struct pci_dev *pdev)
{
return &pdev->dev;
}
static int
bf_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct bf_pci_dev *bfdev;
int err, pci_use_highmem;
int i, num_irq;
memset(bf_global, 0, sizeof(bf_global));
bfdev = kzalloc(sizeof(struct bf_pci_dev), GFP_KERNEL);
if (!bfdev)
return -ENOMEM;
/* init the cookies to be passed to ISRs */
for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) {
bfdev->bf_int_vec[i].int_vec_offset = i;
bfdev->bf_int_vec[i].bf_dev = bfdev;
}
/* initialize intr_mode to none */
bfdev->mode = BF_INTR_MODE_NONE;
/* clear pci_error_state */
bfdev->info.pci_error_state = 0;
/*
* enable device
*/
err = pci_enable_device(pdev);
if (err != 0) {
dev_err(&pdev->dev, "Cannot enable PCI device\n");
goto fail_free;
}
/*
* reserve device's PCI memory regions for use by this
* module
*/
err = pci_request_regions(pdev, "bf_umem");
if (err != 0) {
dev_err(&pdev->dev, "Cannot request regions\n");
goto fail_pci_disable;
}
/* remap IO memory */
err = bf_setup_bars(pdev, &bfdev->info);
if (err != 0)
goto fail_release_iomem;
if (!dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)) &&
!dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64))) {
pci_use_highmem = 1;
} else {
err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32));
if (err) {
err = dma_set_coherent_mask(pci_dev_to_dev(pdev),
DMA_BIT_MASK(32));
if (err) {
dev_err(pci_dev_to_dev(pdev), "No usable DMA "
"configuration, aborting\n");
goto fail_release_iomem;
}
}
pci_use_highmem = 0;
}
/* enable pci error reporting */
/* for the current kernel version, kernel config must have set the followings:
* CONFIG_PCIEPORTBUS=y and CONFIG_PCIEAER = y
* we have pci_error_handlers defined that gets invoked by kernel AER module
* upon detecting the pcie error on this device's addresses.
* However, there seems no way that AER would pass the offending addresses
* to the callback functions. AER logs the error messages on the console.
* This driver's calback function send the SIGIO signal to the user space
* to indicate the error condition.
*/
pci_enable_pcie_error_reporting(pdev);
/* enable bus mastering on the device */
pci_set_master(pdev);
/* fill in bfdev info */
bfdev->info.version = "0.2";
bfdev->info.owner = THIS_MODULE;
bfdev->pdev = pdev;
switch (bf_intr_mode_default) {
#ifdef CONFIG_PCI_MSI
case BF_INTR_MODE_MSIX:
/* Only 1 msi-x vector needed */
bfdev->info.msix_entries = kcalloc(BF_MSIX_ENTRY_CNT,
sizeof(struct msix_entry), GFP_KERNEL);
if (!bfdev->info.msix_entries) {
err = -ENOMEM;
goto fail_clear_pci_master;
}
for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) {
bfdev->info.msix_entries[i].entry= i;
}
num_irq = pci_enable_msix_range(pdev, bfdev->info.msix_entries,
BF_MSIX_ENTRY_CNT, BF_MSIX_ENTRY_CNT);
if (num_irq == BF_MSIX_ENTRY_CNT) {
dev_dbg(&pdev->dev, "using MSI-X");
bfdev->info.num_irq = num_irq;
bfdev->info.irq = bfdev->info.msix_entries[0].vector;
bfdev->mode = BF_INTR_MODE_MSIX;
printk(KERN_DEBUG "bf using %d MSIX irq from %ld\n", num_irq,
bfdev->info.irq);
break;
} else {
if (num_irq)
pci_disable_msix(pdev);
kfree(bfdev->info.msix_entries);
bfdev->info.msix_entries = NULL;
printk(KERN_ERR "bf error allocating MSIX vectors. Trying MSI...\n");
/* and, fall back to MSI */
}
/* ** intentional no-break */
case BF_INTR_MODE_MSI:
num_irq = pci_enable_msi_range(pdev, BF_MSI_ENTRY_CNT, BF_MSI_ENTRY_CNT);
if (num_irq > 0) {
dev_dbg(&pdev->dev, "using MSI");
bfdev->info.num_irq = num_irq;
bfdev->info.irq = pdev->irq;
bfdev->mode = BF_INTR_MODE_MSI;
printk(KERN_DEBUG "bf using %d MSI irq from %ld\n", bfdev->info.num_irq,
bfdev->info.irq);
break;
}
#endif /* CONFIG_PCI_MSI */
/* fall back to Legacy Interrupt, intentional no-break */
case BF_INTR_MODE_LEGACY:
if (pci_intx_mask_supported(pdev)) {
dev_dbg(&pdev->dev, "using INTX");
bfdev->info.irq_flags = IRQF_SHARED;
bfdev->info.irq = pdev->irq;
bfdev->mode = BF_INTR_MODE_LEGACY;
printk(KERN_DEBUG "bf using LEGACY irq %ld\n", bfdev->info.irq);
break;
}
dev_notice(&pdev->dev, "PCI INTx mask not supported\n");
/* fall back to no Interrupt, intentional no-break */
case BF_INTR_MODE_NONE:
bfdev->info.irq = 0;
bfdev->info.num_irq = 0;
bfdev->mode = BF_INTR_MODE_NONE;
break;
default:
dev_err(&pdev->dev, "invalid IRQ mode %u", bf_intr_mode_default);
err = -EINVAL;
goto fail_clear_pci_master;
}
pci_set_drvdata(pdev, bfdev);
sprintf(bfdev->name, "bf_%d", bfdev->info.minor);
/* register bf driver */
err = bf_register_device(&pdev->dev, bfdev);
if (err != 0)
goto fail_release_irq;
bf_global[bfdev->info.minor].async_queue = NULL;
bf_global[bfdev->info.minor].bfdev = bfdev;
dev_info(&pdev->dev, "bf device %d registered with irq %ld\n",
bfdev->instance, bfdev->info.irq);
printk(KERN_ALERT "bf probe ok\n");
return 0;
fail_release_irq:
pci_set_drvdata(pdev, NULL);
if (bfdev->mode == BF_INTR_MODE_MSIX) {
pci_disable_msix(bfdev->pdev);
kfree(bfdev->info.msix_entries);
bfdev->info.msix_entries = NULL;
}
else if (bfdev->mode == BF_INTR_MODE_MSI)
pci_disable_msi(bfdev->pdev);
fail_clear_pci_master:
pci_clear_master(pdev);
fail_release_iomem:
bf_pci_release_iomem(&bfdev->info);
pci_release_regions(pdev);
fail_pci_disable:
pci_disable_device(pdev);
fail_free:
kfree(bfdev);
printk(KERN_ERR "bf probe not ok\n");
return err;
}
static void
bf_pci_remove(struct pci_dev *pdev)
{
struct bf_pci_dev *bfdev = pci_get_drvdata(pdev);
struct bf_listener *cur_listener;
bf_unregister_device(bfdev);
if (bfdev->mode == BF_INTR_MODE_MSIX) {
pci_disable_msix(pdev);
kfree(bfdev->info.msix_entries);
bfdev->info.msix_entries = NULL;
}
else if (bfdev->mode == BF_INTR_MODE_MSI)
pci_disable_msi(pdev);
pci_clear_master(pdev);
bf_pci_release_iomem(&bfdev->info);
pci_release_regions(pdev);
pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
bf_global[bfdev->info.minor].bfdev = NULL;
/* existing filep structures in open file(s) must be informed that
* bf_pci_dev is no longer valid */
spin_lock(&bf_nonisr_lock);
cur_listener = bfdev->listener_head;
while (cur_listener) {
cur_listener->bfdev = NULL;
cur_listener = cur_listener->next;
}
spin_unlock(&bf_nonisr_lock);
kfree(bfdev);
}
/**
* bf_pci_error_detected - called when PCI error is detected
* @pdev: Pointer to PCI device
* @state: The current pci connection state
*
* called when root complex detects pci error associated with the device
*/
static pci_ers_result_t bf_pci_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct bf_pci_dev *bfdev = pci_get_drvdata(pdev);
int minor;
if (!bfdev) {
return PCI_ERS_RESULT_NONE;
}
printk(KERN_ERR "pci_err_detected state %d\n", state);
if (state == pci_channel_io_perm_failure || state == pci_channel_io_frozen) {
bfdev->info.pci_error_state = 1;
/* send a signal to the user space program of the error */
minor = bfdev->info.minor;
if (minor < BF_MAX_DEVICE_CNT && bf_global[minor].async_queue) {
kill_fasync(&bf_global[minor].async_queue, SIGIO, POLL_ERR);
}
return PCI_ERS_RESULT_DISCONNECT;
} else {
return PCI_ERS_RESULT_NONE;
}
}
/**
* bf_pci_slot_reset - called after the pci bus has been reset.
* @pdev: Pointer to PCI device
*
* Restart the card from scratch, as if from a cold-boot.
*/
static pci_ers_result_t bf_pci_slot_reset(struct pci_dev *pdev)
{
/* nothing to do for now as we do not expect to get backto normal after
* a pcie link reset
* TBD: fill in this function if tofino can recover after an error
*/
return PCI_ERS_RESULT_DISCONNECT;
}
/**
* bf_pci_resume - called when kernel thinks the device is up on PCIe.
* @pdev: Pointer to PCI device
*
* This callback is called when the error recovery driver tells us that
* its OK to resume normal operation.
*/
static void bf_pci_resume(struct pci_dev *pdev)
{
/* this function should never be called for Tofinoi */
struct bf_pci_dev *bfdev = pci_get_drvdata(pdev);
printk(KERN_ERR "BF io_resume invoked after pci error\n");
if (bfdev) {
bfdev->info.pci_error_state = 0;
}
}
static int
bf_config_intr_mode(char *intr_str)
{
if (!intr_str) {
pr_info("Use MSIX interrupt by default\n");
return 0;
}
if (!strcmp(intr_str, BF_INTR_MODE_MSIX_NAME)) {
bf_intr_mode_default = BF_INTR_MODE_MSIX;
pr_info("Use MSIX interrupt\n");
} else if (!strcmp(intr_str, BF_INTR_MODE_MSI_NAME)) {
bf_intr_mode_default = BF_INTR_MODE_MSI;
pr_info("Use MSI interrupt\n");
} else if (!strcmp(intr_str, BF_INTR_MODE_LEGACY_NAME)) {
bf_intr_mode_default = BF_INTR_MODE_LEGACY;
pr_info("Use legacy interrupt\n");
} else {
pr_info("Error: bad parameter - %s\n", intr_str);
return -EINVAL;
}
return 0;
}
static const struct pci_device_id bf_pci_tbl[] = {
{PCI_VDEVICE(BF, TOFINO_DEV_ID_A0), 0},
{PCI_VDEVICE(BF, TOFINO_DEV_ID_B0), 0},
/* required last entry */
{ .device = 0 }
};
/* PCI bus error handlers */
static struct pci_error_handlers bf_pci_err_handler = {
.error_detected = bf_pci_error_detected,
.slot_reset = bf_pci_slot_reset,
.resume = bf_pci_resume,
};
static struct pci_driver bf_pci_driver = {
.name = "bf",
.id_table = bf_pci_tbl,
.probe = bf_pci_probe,
.remove = bf_pci_remove,
.err_handler = &bf_pci_err_handler
};
static int __init
bfdrv_init(void)
{
int ret;
ret = bf_config_intr_mode(intr_mode);
if (ret < 0)
return ret;
spin_lock_init(&bf_nonisr_lock);
return pci_register_driver(&bf_pci_driver);
}
static void __exit
bfdrv_exit(void)
{
pci_unregister_driver(&bf_pci_driver);
}
module_init(bfdrv_init);
module_exit(bfdrv_exit);
module_param(intr_mode, charp, S_IRUGO);
MODULE_PARM_DESC(intr_mode,
"bf interrupt mode (default=msix):\n"
" " BF_INTR_MODE_MSIX_NAME " Use MSIX interrupt\n"
" " BF_INTR_MODE_MSI_NAME " Use MSI interrupt\n"
" " BF_INTR_MODE_LEGACY_NAME " Use Legacy interrupt\n"
"\n");
MODULE_DEVICE_TABLE(pci, bf_pci_tbl);
MODULE_DESCRIPTION("Barefoot Tofino PCI device");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Barefoot Networks");