matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
b84dbd8074
sonic-buildimage/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-sfp.c
Guohan Lu 5d46e050d6 [devices]: move platform modules of accton, ingrasys, mitac, quanta into buildimage repo 
Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-11 09:09:03 +00:00

1577 lines
42 KiB
C
Raw Blame History

/*
* SFP driver for accton as7816_64x sfp
*
* Copyright (C) Brandon Chuang <brandon_chuang@accton.com.tw>
*
* Based on ad7414.c
* Copyright 2006 Stefan Roese <sr at denx.de>, DENX Software Engineering
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/slab.h>
#include <linux/delay.h>
#define DRIVER_NAME "as7816_64x_sfp" /* Platform dependent */
#define DEBUG_MODE 0
#if (DEBUG_MODE == 1)
#define DEBUG_PRINT(fmt, args...) \
printk (KERN_INFO "%s:%s[%d]: " fmt "\r\n", __FILE__, __FUNCTION__, __LINE__, ##args)
#else
#define DEBUG_PRINT(fmt, args...)
#endif
#define NUM_OF_SFP_PORT 24
#define EEPROM_NAME "sfp_eeprom"
#define EEPROM_SIZE 256 /* 256 byte eeprom */
#define BIT_INDEX(i) (1ULL << (i))
#define USE_I2C_BLOCK_READ 1 /* Platform dependent */
#define I2C_RW_RETRY_COUNT 10
#define I2C_RW_RETRY_INTERVAL 60 /* ms */
#define SFP_EEPROM_A0_I2C_ADDR (0xA0 >> 1)
#define SFF8024_PHYSICAL_DEVICE_ID_ADDR 0x0
#define SFF8024_DEVICE_ID_SFP 0x3
#define SFF8024_DEVICE_ID_QSFP 0xC
#define SFF8024_DEVICE_ID_QSFP_PLUS 0xD
#define SFF8024_DEVICE_ID_QSFP28 0x11
#define SFF8436_RX_LOS_ADDR 3
#define SFF8436_TX_FAULT_ADDR 4
#define SFF8436_TX_DISABLE_ADDR 86
#define MULTIPAGE_SUPPORT 1
#if (MULTIPAGE_SUPPORT == 1)
/* fundamental unit of addressing for SFF_8472/SFF_8436 */
#define SFF_8436_PAGE_SIZE 128
/*
* The current 8436 (QSFP) spec provides for only 4 supported
* pages (pages 0-3).
* This driver is prepared to support more, but needs a register in the
* EEPROM to indicate how many pages are supported before it is safe
* to implement more pages in the driver.
*/
#define SFF_8436_SPECED_PAGES 4
#define SFF_8436_EEPROM_SIZE ((1 + SFF_8436_SPECED_PAGES) * SFF_8436_PAGE_SIZE)
#define SFF_8436_EEPROM_UNPAGED_SIZE (2 * SFF_8436_PAGE_SIZE)
/*
* The current 8472 (SFP) spec provides for only 3 supported
* pages (pages 0-2).
* This driver is prepared to support more, but needs a register in the
* EEPROM to indicate how many pages are supported before it is safe
* to implement more pages in the driver.
*/
#define SFF_8472_SPECED_PAGES 3
#define SFF_8472_EEPROM_SIZE ((3 + SFF_8472_SPECED_PAGES) * SFF_8436_PAGE_SIZE)
#define SFF_8472_EEPROM_UNPAGED_SIZE (4 * SFF_8436_PAGE_SIZE)
/* a few constants to find our way around the EEPROM */
#define SFF_8436_PAGE_SELECT_REG 0x7F
#define SFF_8436_PAGEABLE_REG 0x02
#define SFF_8436_NOT_PAGEABLE (1<<2)
#define SFF_8472_PAGEABLE_REG 0x40
#define SFF_8472_PAGEABLE (1<<4)
/*
* This parameter is to help this driver avoid blocking other drivers out
* of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
* clock, one 256 byte read takes about 1/43 second which is excessive;
* but the 1/170 second it takes at 400 kHz may be quite reasonable; and
* at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
*
* This value is forced to be a power of two so that writes align on pages.
*/
static unsigned io_limit = SFF_8436_PAGE_SIZE;
/*
* specs often allow 5 msec for a page write, sometimes 20 msec;
* it's important to recover from write timeouts.
*/
static unsigned write_timeout = 25;
typedef enum qsfp_opcode {
QSFP_READ_OP = 0,
QSFP_WRITE_OP = 1
} qsfp_opcode_e;
#endif
static ssize_t show_port_number(struct device *dev, struct device_attribute *da, char *buf);
static ssize_t show_present(struct device *dev, struct device_attribute *da, char *buf);
static ssize_t qsfp_show_tx_rx_status(struct device *dev, struct device_attribute *da, char *buf);
static ssize_t qsfp_set_tx_disable(struct device *dev, struct device_attribute *da, const char *buf, size_t count);;
static ssize_t sfp_eeprom_read(struct i2c_client *, u8, u8 *,int);
static ssize_t sfp_eeprom_write(struct i2c_client *, u8 , const char *,int);
extern int accton_i2c_cpld_read (u8 cpld_addr, u8 reg);
enum sfp_sysfs_attributes {
PRESENT,
PRESENT_ALL,
PORT_NUMBER,
PORT_TYPE,
DDM_IMPLEMENTED,
TX_FAULT,
TX_FAULT1,
TX_FAULT2,
TX_FAULT3,
TX_FAULT4,
TX_DISABLE,
TX_DISABLE1,
TX_DISABLE2,
TX_DISABLE3,
TX_DISABLE4,
RX_LOS,
RX_LOS1,
RX_LOS2,
RX_LOS3,
RX_LOS4,
RX_LOS_ALL
};
/* SFP/QSFP common attributes for sysfs */
static SENSOR_DEVICE_ATTR(sfp_port_number, S_IRUGO, show_port_number, NULL, PORT_NUMBER);
static SENSOR_DEVICE_ATTR(sfp_is_present, S_IRUGO, show_present, NULL, PRESENT);
static SENSOR_DEVICE_ATTR(sfp_is_present_all, S_IRUGO, show_present, NULL, PRESENT_ALL);
static SENSOR_DEVICE_ATTR(sfp_tx_disable, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE);
static SENSOR_DEVICE_ATTR(sfp_tx_fault, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT);
/* QSFP attributes for sysfs */
static SENSOR_DEVICE_ATTR(sfp_rx_los, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS);
static SENSOR_DEVICE_ATTR(sfp_rx_los1, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS1);
static SENSOR_DEVICE_ATTR(sfp_rx_los2, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS2);
static SENSOR_DEVICE_ATTR(sfp_rx_los3, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS3);
static SENSOR_DEVICE_ATTR(sfp_rx_los4, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS4);
static SENSOR_DEVICE_ATTR(sfp_tx_disable1, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE1);
static SENSOR_DEVICE_ATTR(sfp_tx_disable2, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE2);
static SENSOR_DEVICE_ATTR(sfp_tx_disable3, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE3);
static SENSOR_DEVICE_ATTR(sfp_tx_disable4, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE4);
static SENSOR_DEVICE_ATTR(sfp_tx_fault1, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT1);
static SENSOR_DEVICE_ATTR(sfp_tx_fault2, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT2);
static SENSOR_DEVICE_ATTR(sfp_tx_fault3, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT3);
static SENSOR_DEVICE_ATTR(sfp_tx_fault4, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT4);
static struct attribute *qsfp_attributes[] = {
&sensor_dev_attr_sfp_port_number.dev_attr.attr,
&sensor_dev_attr_sfp_is_present.dev_attr.attr,
&sensor_dev_attr_sfp_is_present_all.dev_attr.attr,
&sensor_dev_attr_sfp_rx_los.dev_attr.attr,
&sensor_dev_attr_sfp_rx_los1.dev_attr.attr,
&sensor_dev_attr_sfp_rx_los2.dev_attr.attr,
&sensor_dev_attr_sfp_rx_los3.dev_attr.attr,
&sensor_dev_attr_sfp_rx_los4.dev_attr.attr,
&sensor_dev_attr_sfp_tx_disable.dev_attr.attr,
&sensor_dev_attr_sfp_tx_disable1.dev_attr.attr,
&sensor_dev_attr_sfp_tx_disable2.dev_attr.attr,
&sensor_dev_attr_sfp_tx_disable3.dev_attr.attr,
&sensor_dev_attr_sfp_tx_disable4.dev_attr.attr,
&sensor_dev_attr_sfp_tx_fault.dev_attr.attr,
&sensor_dev_attr_sfp_tx_fault1.dev_attr.attr,
&sensor_dev_attr_sfp_tx_fault2.dev_attr.attr,
&sensor_dev_attr_sfp_tx_fault3.dev_attr.attr,
&sensor_dev_attr_sfp_tx_fault4.dev_attr.attr,
NULL
};
/* Platform dependent +++ */
#define CPLD_PORT_TO_FRONT_PORT(port) (port+1)
enum port_numbers {
as7816_64x_port1, as7816_64x_port2, as7816_64x_port3, as7816_64x_port4,
as7816_64x_port5, as7816_64x_port6, as7816_64x_port7, as7816_64x_port8,
as7816_64x_port9, as7816_64x_port10, as7816_64x_port11, as7816_64x_port12,
as7816_64x_port13, as7816_64x_port14, as7816_64x_port15, as7816_64x_port16,
as7816_64x_port17, as7816_64x_port18, as7816_64x_port19, as7816_64x_port20,
as7816_64x_port21, as7816_64x_port22, as7816_64x_port23, as7816_64x_port24,
as7816_64x_port25, as7816_64x_port26, as7816_64x_port27, as7816_64x_port28,
as7816_64x_port29, as7816_64x_port30, as7816_64x_port31, as7816_64x_port32,
as7816_64x_port33, as7816_64x_port34, as7816_64x_port35, as7816_64x_port36,
as7816_64x_port37, as7816_64x_port38, as7816_64x_port39, as7816_64x_port40,
as7816_64x_port41, as7816_64x_port42, as7816_64x_port43, as7816_64x_port44,
as7816_64x_port45, as7816_64x_port46, as7816_64x_port47, as7816_64x_port48,
as7816_64x_port49, as7816_64x_port50, as7816_64x_port51, as7816_64x_port52,
as7816_64x_port53, as7816_64x_port54, as7816_64x_port55, as7816_64x_port56,
as7816_64x_port57, as7816_64x_port58, as7816_64x_port59, as7816_64x_port60,
as7816_64x_port61, as7816_64x_port62, as7816_64x_port63, as7816_64x_port64
};
#define I2C_DEV_ID(x) { #x, x}
static const struct i2c_device_id sfp_device_id[] = {
I2C_DEV_ID(as7816_64x_port1),
I2C_DEV_ID(as7816_64x_port2),
I2C_DEV_ID(as7816_64x_port3),
I2C_DEV_ID(as7816_64x_port4),
I2C_DEV_ID(as7816_64x_port5),
I2C_DEV_ID(as7816_64x_port6),
I2C_DEV_ID(as7816_64x_port7),
I2C_DEV_ID(as7816_64x_port8),
I2C_DEV_ID(as7816_64x_port9),
I2C_DEV_ID(as7816_64x_port10),
I2C_DEV_ID(as7816_64x_port11),
I2C_DEV_ID(as7816_64x_port12),
I2C_DEV_ID(as7816_64x_port13),
I2C_DEV_ID(as7816_64x_port14),
I2C_DEV_ID(as7816_64x_port15),
I2C_DEV_ID(as7816_64x_port16),
I2C_DEV_ID(as7816_64x_port17),
I2C_DEV_ID(as7816_64x_port18),
I2C_DEV_ID(as7816_64x_port19),
I2C_DEV_ID(as7816_64x_port20),
I2C_DEV_ID(as7816_64x_port21),
I2C_DEV_ID(as7816_64x_port22),
I2C_DEV_ID(as7816_64x_port23),
I2C_DEV_ID(as7816_64x_port24),
I2C_DEV_ID(as7816_64x_port25),
I2C_DEV_ID(as7816_64x_port26),
I2C_DEV_ID(as7816_64x_port27),
I2C_DEV_ID(as7816_64x_port28),
I2C_DEV_ID(as7816_64x_port29),
I2C_DEV_ID(as7816_64x_port30),
I2C_DEV_ID(as7816_64x_port31),
I2C_DEV_ID(as7816_64x_port32),
I2C_DEV_ID(as7816_64x_port33),
I2C_DEV_ID(as7816_64x_port34),
I2C_DEV_ID(as7816_64x_port35),
I2C_DEV_ID(as7816_64x_port36),
I2C_DEV_ID(as7816_64x_port37),
I2C_DEV_ID(as7816_64x_port38),
I2C_DEV_ID(as7816_64x_port39),
I2C_DEV_ID(as7816_64x_port40),
I2C_DEV_ID(as7816_64x_port41),
I2C_DEV_ID(as7816_64x_port42),
I2C_DEV_ID(as7816_64x_port43),
I2C_DEV_ID(as7816_64x_port44),
I2C_DEV_ID(as7816_64x_port45),
I2C_DEV_ID(as7816_64x_port46),
I2C_DEV_ID(as7816_64x_port47),
I2C_DEV_ID(as7816_64x_port48),
I2C_DEV_ID(as7816_64x_port49),
I2C_DEV_ID(as7816_64x_port50),
I2C_DEV_ID(as7816_64x_port51),
I2C_DEV_ID(as7816_64x_port52),
I2C_DEV_ID(as7816_64x_port53),
I2C_DEV_ID(as7816_64x_port54),
I2C_DEV_ID(as7816_64x_port55),
I2C_DEV_ID(as7816_64x_port56),
I2C_DEV_ID(as7816_64x_port57),
I2C_DEV_ID(as7816_64x_port58),
I2C_DEV_ID(as7816_64x_port59),
I2C_DEV_ID(as7816_64x_port60),
I2C_DEV_ID(as7816_64x_port61),
I2C_DEV_ID(as7816_64x_port62),
I2C_DEV_ID(as7816_64x_port63),
I2C_DEV_ID(as7816_64x_port64),
{ /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, sfp_device_id);
/* Platform dependent --- */
enum driver_type_e {
DRIVER_TYPE_SFP_MSA,
DRIVER_TYPE_SFP_DDM,
DRIVER_TYPE_QSFP,
DRIVER_TYPE_XFP
};
/* Each client has this additional data
*/
struct eeprom_data {
char valid; /* !=0 if registers are valid */
unsigned long last_updated; /* In jiffies */
struct bin_attribute bin; /* eeprom data */
};
struct qsfp_data {
char valid; /* !=0 if registers are valid */
unsigned long last_updated; /* In jiffies */
u8 status[3]; /* bit0:port0, bit1:port1 and so on */
/* index 0 => tx_fail
1 => tx_disable
2 => rx_loss */
u8 device_id;
struct eeprom_data eeprom;
};
struct sfp_port_data {
struct mutex update_lock;
enum driver_type_e driver_type;
int port; /* CPLD port index */
u64 present; /* present status, bit0:port0, bit1:port1 and so on */
struct qsfp_data *qsfp;
struct i2c_client *client;
#if (MULTIPAGE_SUPPORT == 1)
int use_smbus;
u8 *writebuf;
unsigned write_max;
#endif
};
#if (MULTIPAGE_SUPPORT == 1)
static ssize_t sfp_port_read_write(struct sfp_port_data *port_data,
char *buf, loff_t off, size_t len, qsfp_opcode_e opcode);
#endif
static ssize_t show_port_number(struct device *dev, struct device_attribute *da,
char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct sfp_port_data *data = i2c_get_clientdata(client);
return sprintf(buf, "%d\n", CPLD_PORT_TO_FRONT_PORT(data->port));
}
/* Platform dependent +++ */
static struct sfp_port_data *sfp_update_present(struct i2c_client *client)
{
struct sfp_port_data *data = i2c_get_clientdata(client);
int i = 0;
int status = -1;
u8 regs[] = {0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77};
DEBUG_PRINT("Starting sfp present status update");
mutex_lock(&data->update_lock);
/* Read present status of port 1~64 */
data->present = 0;
for (i = 0; i < ARRAY_SIZE(regs); i++) {
status = accton_i2c_cpld_read(0x60, regs[i]);
if (status < 0) {
DEBUG_PRINT("cpld(0x60) reg(0x%x) err %d", regs[i], status);
goto exit;
}
DEBUG_PRINT("Present status = 0x%lx", data->present);
data->present |= (u64)status << (i*8);
}
DEBUG_PRINT("Present status = 0x%lx", data->present);
exit:
mutex_unlock(&data->update_lock);
return (status < 0) ? ERR_PTR(status) : data;
}
/* Platform dependent --- */
static int sfp_is_port_present(struct i2c_client *client, int port)
{
struct sfp_port_data *data = i2c_get_clientdata(client);
data = sfp_update_present(client);
if (IS_ERR(data)) {
return PTR_ERR(data);
}
return (data->present & BIT_INDEX(data->port)) ? 0 : 1; /* Platform dependent */
}
/* Platform dependent +++ */
static ssize_t show_present(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct i2c_client *client = to_i2c_client(dev);
if (PRESENT_ALL == attr->index) {
int i;
u8 values[8] = {0};
struct sfp_port_data *data = sfp_update_present(client);
if (IS_ERR(data)) {
return PTR_ERR(data);
}
for (i = 0; i < ARRAY_SIZE(values); i++) {
values[i] = ~(u8)(data->present >> (i * 8));
}
/* Return values 1 -> 64 in order */
return sprintf(buf, "%.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x\n",
values[0], values[1], values[2], values[3],
values[4], values[5], values[6], values[7]);
}
else {
struct sfp_port_data *data = i2c_get_clientdata(client);
int present = sfp_is_port_present(client, data->port);
if (IS_ERR_VALUE(present)) {
return present;
}
/* PRESENT */
return sprintf(buf, "%d\n", present);
}
}
/* Platform dependent --- */
static struct sfp_port_data *qsfp_update_tx_rx_status(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct sfp_port_data *data = i2c_get_clientdata(client);
int i, status = -1;
u8 buf = 0;
u8 reg[] = {SFF8436_TX_FAULT_ADDR, SFF8436_TX_DISABLE_ADDR, SFF8436_RX_LOS_ADDR};
if (time_before(jiffies, data->qsfp->last_updated + HZ + HZ / 2) && data->qsfp->valid) {
return data;
}
DEBUG_PRINT("Starting sfp tx rx status update");
mutex_lock(&data->update_lock);
data->qsfp->valid = 0;
memset(data->qsfp->status, 0, sizeof(data->qsfp->status));
/* Notify device to update tx fault/ tx disable/ rx los status */
for (i = 0; i < ARRAY_SIZE(reg); i++) {
status = sfp_eeprom_read(client, reg[i], &buf, sizeof(buf));
if (unlikely(status < 0)) {
goto exit;
}
}
msleep(200);
/* Read actual tx fault/ tx disable/ rx los status */
for (i = 0; i < ARRAY_SIZE(reg); i++) {
status = sfp_eeprom_read(client, reg[i], &buf, sizeof(buf));
if (unlikely(status < 0)) {
goto exit;
}
DEBUG_PRINT("qsfp reg(0x%x) status = (0x%x)", reg[i], data->qsfp->status[i]);
data->qsfp->status[i] = (buf & 0xF);
}
data->qsfp->valid = 1;
data->qsfp->last_updated = jiffies;
exit:
mutex_unlock(&data->update_lock);
return (status < 0) ? ERR_PTR(status) : data;
}
static ssize_t qsfp_show_tx_rx_status(struct device *dev, struct device_attribute *da,
char *buf)
{
int present;
u8 val = 0;
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct i2c_client *client = to_i2c_client(dev);
struct sfp_port_data *data = i2c_get_clientdata(client);
present = sfp_is_port_present(client, data->port);
if (IS_ERR_VALUE(present)) {
return present;
}
if (present == 0) {
/* port is not present */
return -ENXIO;
}
data = qsfp_update_tx_rx_status(dev);
if (IS_ERR(data)) {
return PTR_ERR(data);
}
switch (attr->index) {
case TX_FAULT:
val = !!(data->qsfp->status[2] & 0xF);
break;
case TX_FAULT1:
case TX_FAULT2:
case TX_FAULT3:
case TX_FAULT4:
val = !!(data->qsfp->status[2] & BIT_INDEX(attr->index - TX_FAULT1));
break;
case TX_DISABLE:
val = data->qsfp->status[1] & 0xF;
break;
case TX_DISABLE1:
case TX_DISABLE2:
case TX_DISABLE3:
case TX_DISABLE4:
val = !!(data->qsfp->status[1] & BIT_INDEX(attr->index - TX_DISABLE1));
break;
case RX_LOS:
val = !!(data->qsfp->status[0] & 0xF);
break;
case RX_LOS1:
case RX_LOS2:
case RX_LOS3:
case RX_LOS4:
val = !!(data->qsfp->status[0] & BIT_INDEX(attr->index - RX_LOS1));
break;
default:
break;
}
return sprintf(buf, "%d\n", val);
}
static ssize_t qsfp_set_tx_disable(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
long disable;
int status;
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct i2c_client *client = to_i2c_client(dev);
struct sfp_port_data *data = i2c_get_clientdata(client);
status = sfp_is_port_present(client, data->port);
if (IS_ERR_VALUE(status)) {
return status;
}
if (!status) {
/* port is not present */
return -ENXIO;
}
status = kstrtol(buf, 10, &disable);
if (status) {
return status;
}
data = qsfp_update_tx_rx_status(dev);
if (IS_ERR(data)) {
return PTR_ERR(data);
}
mutex_lock(&data->update_lock);
if (attr->index == TX_DISABLE) {
if (disable) {
data->qsfp->status[1] |= 0xF;
}
else {
data->qsfp->status[1] &= ~0xF;
}
}
else {/* TX_DISABLE1 ~ TX_DISABLE4*/
if (disable) {
data->qsfp->status[1] |= (1 << (attr->index - TX_DISABLE1));
}
else {
data->qsfp->status[1] &= ~(1 << (attr->index - TX_DISABLE1));
}
}
DEBUG_PRINT("index = (%d), status = (0x%x)", attr->index, data->qsfp->status[1]);
status = sfp_eeprom_write(data->client, SFF8436_TX_DISABLE_ADDR, &data->qsfp->status[1], sizeof(data->qsfp->status[1]));
if (unlikely(status < 0)) {
count = status;
}
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t sfp_eeprom_write(struct i2c_client *client, u8 command, const char *data,
int data_len)
{
#if USE_I2C_BLOCK_READ
int status, retry = I2C_RW_RETRY_COUNT;
if (data_len > I2C_SMBUS_BLOCK_MAX) {
data_len = I2C_SMBUS_BLOCK_MAX;
}
while (retry) {
status = i2c_smbus_write_i2c_block_data(client, command, data_len, data);
if (unlikely(status < 0)) {
msleep(I2C_RW_RETRY_INTERVAL);
retry--;
continue;
}
break;
}
if (unlikely(status < 0)) {
return status;
}
return data_len;
#else
int status, retry = I2C_RW_RETRY_COUNT;
while (retry) {
status = i2c_smbus_write_byte_data(client, command, *data);
if (unlikely(status < 0)) {
msleep(I2C_RW_RETRY_INTERVAL);
retry--;
continue;
}
break;
}
if (unlikely(status < 0)) {
return status;
}
return 1;
#endif
}
#if (MULTIPAGE_SUPPORT == 0)
static ssize_t sfp_port_write(struct sfp_port_data *data,
const char *buf, loff_t off, size_t count)
{
ssize_t retval = 0;
if (unlikely(!count)) {
return count;
}
/*
* Write data to chip, protecting against concurrent updates
* from this host, but not from other I2C masters.
*/
mutex_lock(&data->update_lock);
while (count) {
ssize_t status;
status = sfp_eeprom_write(data->client, off, buf, count);
if (status <= 0) {
if (retval == 0) {
retval = status;
}
break;
}
buf += status;
off += status;
count -= status;
retval += status;
}
mutex_unlock(&data->update_lock);
return retval;
}
#endif
static ssize_t sfp_bin_write(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr,
char *buf, loff_t off, size_t count)
{
int present;
struct sfp_port_data *data;
DEBUG_PRINT("%s(%d) offset = (%d), count = (%d)", off, count);
data = dev_get_drvdata(container_of(kobj, struct device, kobj));
present = sfp_is_port_present(data->client, data->port);
if (IS_ERR_VALUE(present)) {
return present;
}
if (present == 0) {
/* port is not present */
return -ENODEV;
}
#if (MULTIPAGE_SUPPORT == 1)
return sfp_port_read_write(data, buf, off, count, QSFP_WRITE_OP);
#else
return sfp_port_write(data, buf, off, count);
#endif
}
static ssize_t sfp_eeprom_read(struct i2c_client *client, u8 command, u8 *data,
int data_len)
{
#if USE_I2C_BLOCK_READ
int status, retry = I2C_RW_RETRY_COUNT;
if (data_len > I2C_SMBUS_BLOCK_MAX) {
data_len = I2C_SMBUS_BLOCK_MAX;
}
while (retry) {
status = i2c_smbus_read_i2c_block_data(client, command, data_len, data);
if (unlikely(status < 0)) {
msleep(I2C_RW_RETRY_INTERVAL);
retry--;
continue;
}
break;
}
if (unlikely(status < 0)) {
goto abort;
}
if (unlikely(status != data_len)) {
status = -EIO;
goto abort;
}
//result = data_len;
abort:
return status;
#else
int status, retry = I2C_RW_RETRY_COUNT;
while (retry) {
status = i2c_smbus_read_byte_data(client, command);
if (unlikely(status < 0)) {
msleep(I2C_RW_RETRY_INTERVAL);
retry--;
continue;
}
break;
}
if (unlikely(status < 0)) {
dev_dbg(&client->dev, "sfp read byte data failed, command(0x%2x), data(0x%2x)\r\n", command, status);
goto abort;
}
*data = (u8)status;
status = 1;
abort:
return status;
#endif
}
#if (MULTIPAGE_SUPPORT == 1)
/*-------------------------------------------------------------------------*/
/*
* This routine computes the addressing information to be used for
* a given r/w request.
*
* Task is to calculate the client (0 = i2c addr 50, 1 = i2c addr 51),
* the page, and the offset.
*
* Handles both SFP and QSFP.
* For SFP, offset 0-255 are on client[0], >255 is on client[1]
* Offset 256-383 are on the lower half of client[1]
* Pages are accessible on the upper half of client[1].
* Offset >383 are in 128 byte pages mapped into the upper half
*
* For QSFP, all offsets are on client[0]
* offset 0-127 are on the lower half of client[0] (no paging)
* Pages are accessible on the upper half of client[1].
* Offset >127 are in 128 byte pages mapped into the upper half
*
* Callers must not read/write beyond the end of a client or a page
* without recomputing the client/page. Hence offset (within page)
* plus length must be less than or equal to 128. (Note that this
* routine does not have access to the length of the call, hence
* cannot do the validity check.)
*
* Offset within Lower Page 00h and Upper Page 00h are not recomputed
*/
static uint8_t sff_8436_translate_offset(struct sfp_port_data *port_data,
loff_t *offset, struct i2c_client **client)
{
unsigned page = 0;
*client = port_data->client;
/*
* if offset is in the range 0-128...
* page doesn't matter (using lower half), return 0.
* offset is already correct (don't add 128 to get to paged area)
*/
if (*offset < SFF_8436_PAGE_SIZE)
return page;
/* note, page will always be positive since *offset >= 128 */
page = (*offset >> 7)-1;
/* 0x80 places the offset in the top half, offset is last 7 bits */
*offset = SFF_8436_PAGE_SIZE + (*offset & 0x7f);
return page; /* note also returning client and offset */
}
static ssize_t sff_8436_eeprom_read(struct sfp_port_data *port_data,
struct i2c_client *client,
char *buf, unsigned offset, size_t count)
{
struct i2c_msg msg[2];
u8 msgbuf[2];
unsigned long timeout, read_time;
int status, i;
memset(msg, 0, sizeof(msg));
switch (port_data->use_smbus) {
case I2C_SMBUS_I2C_BLOCK_DATA:
/*smaller eeproms can work given some SMBus extension calls */
if (count > I2C_SMBUS_BLOCK_MAX)
count = I2C_SMBUS_BLOCK_MAX;
break;
case I2C_SMBUS_WORD_DATA:
/* Check for odd length transaction */
count = (count == 1) ? 1 : 2;
break;
case I2C_SMBUS_BYTE_DATA:
count = 1;
break;
default:
/*
* When we have a better choice than SMBus calls, use a
* combined I2C message. Write address; then read up to
* io_limit data bytes. msgbuf is u8 and will cast to our
* needs.
*/
i = 0;
msgbuf[i++] = offset;
msg[0].addr = client->addr;
msg[0].buf = msgbuf;
msg[0].len = i;
msg[1].addr = client->addr;
msg[1].flags = I2C_M_RD;
msg[1].buf = buf;
msg[1].len = count;
}
/*
* Reads fail if the previous write didn't complete yet. We may
* loop a few times until this one succeeds, waiting at least
* long enough for one entire page write to work.
*/
timeout = jiffies + msecs_to_jiffies(write_timeout);
do {
read_time = jiffies;
switch (port_data->use_smbus) {
case I2C_SMBUS_I2C_BLOCK_DATA:
status = i2c_smbus_read_i2c_block_data(client, offset,
count, buf);
break;
case I2C_SMBUS_WORD_DATA:
status = i2c_smbus_read_word_data(client, offset);
if (status >= 0) {
buf[0] = status & 0xff;
if (count == 2)
buf[1] = status >> 8;
status = count;
}
break;
case I2C_SMBUS_BYTE_DATA:
status = i2c_smbus_read_byte_data(client, offset);
if (status >= 0) {
buf[0] = status;
status = count;
}
break;
default:
status = i2c_transfer(client->adapter, msg, 2);
if (status == 2)
status = count;
}
dev_dbg(&client->dev, "eeprom read %zu@%d --> %d (%ld)\n",
count, offset, status, jiffies);
if (status == count) /* happy path */
return count;
if (status == -ENXIO) /* no module present */
return status;
/* REVISIT: at HZ=100, this is sloooow */
msleep(1);
} while (time_before(read_time, timeout));
return -ETIMEDOUT;
}
static ssize_t sff_8436_eeprom_write(struct sfp_port_data *port_data,
struct i2c_client *client,
const char *buf,
unsigned offset, size_t count)
{
struct i2c_msg msg;
ssize_t status;
unsigned long timeout, write_time;
unsigned next_page_start;
int i = 0;
/* write max is at most a page
* (In this driver, write_max is actually one byte!)
*/
if (count > port_data->write_max)
count = port_data->write_max;
/* shorten count if necessary to avoid crossing page boundary */
next_page_start = roundup(offset + 1, SFF_8436_PAGE_SIZE);
if (offset + count > next_page_start)
count = next_page_start - offset;
switch (port_data->use_smbus) {
case I2C_SMBUS_I2C_BLOCK_DATA:
/*smaller eeproms can work given some SMBus extension calls */
if (count > I2C_SMBUS_BLOCK_MAX)
count = I2C_SMBUS_BLOCK_MAX;
break;
case I2C_SMBUS_WORD_DATA:
/* Check for odd length transaction */
count = (count == 1) ? 1 : 2;
break;
case I2C_SMBUS_BYTE_DATA:
count = 1;
break;
default:
/* If we'll use I2C calls for I/O, set up the message */
msg.addr = client->addr;
msg.flags = 0;
/* msg.buf is u8 and casts will mask the values */
msg.buf = port_data->writebuf;
msg.buf[i++] = offset;
memcpy(&msg.buf[i], buf, count);
msg.len = i + count;
break;
}
/*
* Reads fail if the previous write didn't complete yet. We may
* loop a few times until this one succeeds, waiting at least
* long enough for one entire page write to work.
*/
timeout = jiffies + msecs_to_jiffies(write_timeout);
do {
write_time = jiffies;
switch (port_data->use_smbus) {
case I2C_SMBUS_I2C_BLOCK_DATA:
status = i2c_smbus_write_i2c_block_data(client,
offset, count, buf);
if (status == 0)
status = count;
break;
case I2C_SMBUS_WORD_DATA:
if (count == 2) {
status = i2c_smbus_write_word_data(client,
offset, (u16)((buf[0])|(buf[1] << 8)));
} else {
/* count = 1 */
status = i2c_smbus_write_byte_data(client,
offset, buf[0]);
}
if (status == 0)
status = count;
break;
case I2C_SMBUS_BYTE_DATA:
status = i2c_smbus_write_byte_data(client, offset,
buf[0]);
if (status == 0)
status = count;
break;
default:
status = i2c_transfer(client->adapter, &msg, 1);
if (status == 1)
status = count;
break;
}
dev_dbg(&client->dev, "eeprom write %zu@%d --> %ld (%lu)\n",
count, offset, (long int) status, jiffies);
if (status == count)
return count;
/* REVISIT: at HZ=100, this is sloooow */
msleep(1);
} while (time_before(write_time, timeout));
return -ETIMEDOUT;
}
static ssize_t sff_8436_eeprom_update_client(struct sfp_port_data *port_data,
char *buf, loff_t off,
size_t count, qsfp_opcode_e opcode)
{
struct i2c_client *client;
ssize_t retval = 0;
u8 page = 0;
loff_t phy_offset = off;
int ret = 0;
page = sff_8436_translate_offset(port_data, &phy_offset, &client);
dev_dbg(&client->dev,
"sff_8436_eeprom_update_client off %lld page:%d phy_offset:%lld, count:%ld, opcode:%d\n",
off, page, phy_offset, (long int) count, opcode);
if (page > 0) {
ret = sff_8436_eeprom_write(port_data, client, &page,
SFF_8436_PAGE_SELECT_REG, 1);
if (ret < 0) {
dev_dbg(&client->dev,
"Write page register for page %d failed ret:%d!\n",
page, ret);
return ret;
}
}
while (count) {
ssize_t status;
if (opcode == QSFP_READ_OP) {
status = sff_8436_eeprom_read(port_data, client,
buf, phy_offset, count);
} else {
status = sff_8436_eeprom_write(port_data, client,
buf, phy_offset, count);
}
if (status <= 0) {
if (retval == 0)
retval = status;
break;
}
buf += status;
phy_offset += status;
count -= status;
retval += status;
}
if (page > 0) {
/* return the page register to page 0 (why?) */
page = 0;
ret = sff_8436_eeprom_write(port_data, client, &page,
SFF_8436_PAGE_SELECT_REG, 1);
if (ret < 0) {
dev_err(&client->dev,
"Restore page register to page %d failed ret:%d!\n",
page, ret);
return ret;
}
}
return retval;
}
/*
* Figure out if this access is within the range of supported pages.
* Note this is called on every access because we don't know if the
* module has been replaced since the last call.
* If/when modules support more pages, this is the routine to update
* to validate and allow access to additional pages.
*
* Returns updated len for this access:
* - entire access is legal, original len is returned.
* - access begins legal but is too long, len is truncated to fit.
* - initial offset exceeds supported pages, return -EINVAL
*/
static ssize_t sff_8436_page_legal(struct sfp_port_data *port_data,
loff_t off, size_t len)
{
struct i2c_client *client = port_data->client;
u8 regval;
int status;
size_t maxlen;
if (off < 0) return -EINVAL;
if (port_data->driver_type == DRIVER_TYPE_SFP_MSA) {
/* SFP case */
/* if no pages needed, we're good */
if ((off + len) <= SFF_8472_EEPROM_UNPAGED_SIZE) return len;
/* if offset exceeds possible pages, we're not good */
if (off >= SFF_8472_EEPROM_SIZE) return -EINVAL;
/* in between, are pages supported? */
status = sff_8436_eeprom_read(port_data, client, &regval,
SFF_8472_PAGEABLE_REG, 1);
if (status < 0) return status; /* error out (no module?) */
if (regval & SFF_8472_PAGEABLE) {
/* Pages supported, trim len to the end of pages */
maxlen = SFF_8472_EEPROM_SIZE - off;
} else {
/* pages not supported, trim len to unpaged size */
maxlen = SFF_8472_EEPROM_UNPAGED_SIZE - off;
}
len = (len > maxlen) ? maxlen : len;
dev_dbg(&client->dev,
"page_legal, SFP, off %lld len %ld\n",
off, (long int) len);
}
else if (port_data->driver_type == DRIVER_TYPE_QSFP ||
port_data->driver_type == DRIVER_TYPE_XFP) {
/* QSFP case */
/* if no pages needed, we're good */
if ((off + len) <= SFF_8436_EEPROM_UNPAGED_SIZE) return len;
/* if offset exceeds possible pages, we're not good */
if (off >= SFF_8436_EEPROM_SIZE) return -EINVAL;
/* in between, are pages supported? */
status = sff_8436_eeprom_read(port_data, client, &regval,
SFF_8436_PAGEABLE_REG, 1);
if (status < 0) return status; /* error out (no module?) */
if (regval & SFF_8436_NOT_PAGEABLE) {
/* pages not supported, trim len to unpaged size */
maxlen = SFF_8436_EEPROM_UNPAGED_SIZE - off;
} else {
/* Pages supported, trim len to the end of pages */
maxlen = SFF_8436_EEPROM_SIZE - off;
}
len = (len > maxlen) ? maxlen : len;
dev_dbg(&client->dev,
"page_legal, QSFP, off %lld len %ld\n",
off, (long int) len);
}
else {
return -EINVAL;
}
return len;
}
static ssize_t sfp_port_read_write(struct sfp_port_data *port_data,
char *buf, loff_t off, size_t len, qsfp_opcode_e opcode)
{
struct i2c_client *client = port_data->client;
int chunk;
int status = 0;
ssize_t retval;
size_t pending_len = 0, chunk_len = 0;
loff_t chunk_offset = 0, chunk_start_offset = 0;
if (unlikely(!len))
return len;
/*
* Read data from chip, protecting against concurrent updates
* from this host, but not from other I2C masters.
*/
mutex_lock(&port_data->update_lock);
/*
* Confirm this access fits within the device suppored addr range
*/
len = sff_8436_page_legal(port_data, off, len);
if (len < 0) {
status = len;
goto err;
}
/*
* For each (128 byte) chunk involved in this request, issue a
* separate call to sff_eeprom_update_client(), to
* ensure that each access recalculates the client/page
* and writes the page register as needed.
* Note that chunk to page mapping is confusing, is different for
* QSFP and SFP, and never needs to be done. Don't try!
*/
pending_len = len; /* amount remaining to transfer */
retval = 0; /* amount transferred */
for (chunk = off >> 7; chunk <= (off + len - 1) >> 7; chunk++) {
/*
* Compute the offset and number of bytes to be read/write
*
* 1. start at offset 0 (within the chunk), and read/write
* the entire chunk
* 2. start at offset 0 (within the chunk) and read/write less
* than entire chunk
* 3. start at an offset not equal to 0 and read/write the rest
* of the chunk
* 4. start at an offset not equal to 0 and read/write less than
* (end of chunk - offset)
*/
chunk_start_offset = chunk * SFF_8436_PAGE_SIZE;
if (chunk_start_offset < off) {
chunk_offset = off;
if ((off + pending_len) < (chunk_start_offset +
SFF_8436_PAGE_SIZE))
chunk_len = pending_len;
else
chunk_len = (chunk+1)*SFF_8436_PAGE_SIZE - off;/*SFF_8436_PAGE_SIZE - off;*/
} else {
chunk_offset = chunk_start_offset;
if (pending_len > SFF_8436_PAGE_SIZE)
chunk_len = SFF_8436_PAGE_SIZE;
else
chunk_len = pending_len;
}
dev_dbg(&client->dev,
"sff_r/w: off %lld, len %ld, chunk_start_offset %lld, chunk_offset %lld, chunk_len %ld, pending_len %ld\n",
off, (long int) len, chunk_start_offset, chunk_offset,
(long int) chunk_len, (long int) pending_len);
/*
* note: chunk_offset is from the start of the EEPROM,
* not the start of the chunk
*/
status = sff_8436_eeprom_update_client(port_data, buf,
chunk_offset, chunk_len, opcode);
if (status != chunk_len) {
/* This is another 'no device present' path */
dev_dbg(&client->dev,
"sff_8436_update_client for chunk %d chunk_offset %lld chunk_len %ld failed %d!\n",
chunk, chunk_offset, (long int) chunk_len, status);
goto err;
}
buf += status;
pending_len -= status;
retval += status;
}
mutex_unlock(&port_data->update_lock);
return retval;
err:
mutex_unlock(&port_data->update_lock);
return status;
}
#else
static ssize_t sfp_port_read(struct sfp_port_data *data,
char *buf, loff_t off, size_t count)
{
ssize_t retval = 0;
if (unlikely(!count)) {
DEBUG_PRINT("Count = 0, return");
return count;
}
/*
* Read data from chip, protecting against concurrent updates
* from this host, but not from other I2C masters.
*/
mutex_lock(&data->update_lock);
while (count) {
ssize_t status;
status = sfp_eeprom_read(data->client, off, buf, count);
if (status <= 0) {
if (retval == 0) {
retval = status;
}
break;
}
buf += status;
off += status;
count -= status;
retval += status;
}
mutex_unlock(&data->update_lock);
return retval;
}
#endif
static ssize_t sfp_bin_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr,
char *buf, loff_t off, size_t count)
{
int present;
struct sfp_port_data *data;
DEBUG_PRINT("offset = (%d), count = (%d)", off, count);
data = dev_get_drvdata(container_of(kobj, struct device, kobj));
present = sfp_is_port_present(data->client, data->port);
if (IS_ERR_VALUE(present)) {
return present;
}
if (present == 0) {
/* port is not present */
return -ENODEV;
}
#if (MULTIPAGE_SUPPORT == 1)
return sfp_port_read_write(data, buf, off, count, QSFP_READ_OP);
#else
return sfp_port_read(data, buf, off, count);
#endif
}
#if (MULTIPAGE_SUPPORT == 1)
static int sfp_sysfs_eeprom_init(struct kobject *kobj, struct bin_attribute *eeprom, size_t size)
#else
static int sfp_sysfs_eeprom_init(struct kobject *kobj, struct bin_attribute *eeprom)
#endif
{
int err;
sysfs_bin_attr_init(eeprom);
eeprom->attr.name = EEPROM_NAME;
eeprom->attr.mode = S_IWUSR | S_IRUGO;
eeprom->read = sfp_bin_read;
eeprom->write = sfp_bin_write;
#if (MULTIPAGE_SUPPORT == 1)
eeprom->size = size;
#else
eeprom->size = EEPROM_SIZE;
#endif
/* Create eeprom file */
err = sysfs_create_bin_file(kobj, eeprom);
if (err) {
return err;
}
return 0;
}
static int sfp_sysfs_eeprom_cleanup(struct kobject *kobj, struct bin_attribute *eeprom)
{
sysfs_remove_bin_file(kobj, eeprom);
return 0;
}
#if (MULTIPAGE_SUPPORT == 0)
static int sfp_i2c_check_functionality(struct i2c_client *client)
{
#if USE_I2C_BLOCK_READ
return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK);
#else
return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA);
#endif
}
#endif
static const struct attribute_group qsfp_group = {
.attrs = qsfp_attributes,
};
static int qsfp_probe(struct i2c_client *client, const struct i2c_device_id *dev_id,
struct qsfp_data **data)
{
int status;
struct qsfp_data *qsfp;
#if (MULTIPAGE_SUPPORT == 0)
if (!sfp_i2c_check_functionality(client)) {
status = -EIO;
goto exit;
}
#endif
qsfp = kzalloc(sizeof(struct qsfp_data), GFP_KERNEL);
if (!qsfp) {
status = -ENOMEM;
goto exit;
}
/* Register sysfs hooks */
status = sysfs_create_group(&client->dev.kobj, &qsfp_group);
if (status) {
goto exit_free;
}
/* init eeprom */
#if (MULTIPAGE_SUPPORT == 1)
status = sfp_sysfs_eeprom_init(&client->dev.kobj, &qsfp->eeprom.bin, SFF_8436_EEPROM_SIZE);
#else
status = sfp_sysfs_eeprom_init(&client->dev.kobj, &qsfp->eeprom.bin);
#endif
if (status) {
goto exit_remove;
}
*data = qsfp;
dev_info(&client->dev, "qsfp '%s'\n", client->name);
return 0;
exit_remove:
sysfs_remove_group(&client->dev.kobj, &qsfp_group);
exit_free:
kfree(qsfp);
exit:
return status;
}
/* Platform dependent +++ */
static int sfp_device_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
int ret = 0;
struct sfp_port_data *data = NULL;
if (client->addr != SFP_EEPROM_A0_I2C_ADDR) {
return -ENODEV;
}
if (dev_id->driver_data < as7816_64x_port1 || dev_id->driver_data > as7816_64x_port64) {
return -ENXIO;
}
data = kzalloc(sizeof(struct sfp_port_data), GFP_KERNEL);
if (!data) {
return -ENOMEM;
}
#if (MULTIPAGE_SUPPORT == 1)
data->use_smbus = 0;
/* Use I2C operations unless we're stuck with SMBus extensions. */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
if (i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
data->use_smbus = I2C_SMBUS_I2C_BLOCK_DATA;
} else if (i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_WORD_DATA)) {
data->use_smbus = I2C_SMBUS_WORD_DATA;
} else if (i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
data->use_smbus = I2C_SMBUS_BYTE_DATA;
} else {
ret = -EPFNOSUPPORT;
goto exit_kfree;
}
}
if (!data->use_smbus ||
(i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) ||
i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WRITE_WORD_DATA) ||
i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
/*
* NOTE: AN-2079
* Finisar recommends that the host implement 1 byte writes
* only since this module only supports 32 byte page boundaries.
* 2 byte writes are acceptable for PE and Vout changes per
* Application Note AN-2071.
*/
unsigned write_max = 1;
if (write_max > io_limit)
write_max = io_limit;
if (data->use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
write_max = I2C_SMBUS_BLOCK_MAX;
data->write_max = write_max;
/* buffer (data + address at the beginning) */
data->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
if (!data->writebuf) {
ret = -ENOMEM;
goto exit_kfree;
}
} else {
dev_warn(&client->dev,
"cannot write due to controller restrictions.");
}
if (data->use_smbus == I2C_SMBUS_WORD_DATA ||
data->use_smbus == I2C_SMBUS_BYTE_DATA) {
dev_notice(&client->dev, "Falling back to %s reads, "
"performance will suffer\n", data->use_smbus ==
I2C_SMBUS_WORD_DATA ? "word" : "byte");
}
#endif
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
data->port = dev_id->driver_data;
data->client = client;
data->driver_type = DRIVER_TYPE_QSFP;
ret = qsfp_probe(client, dev_id, &data->qsfp);
if (ret < 0) {
goto exit_kfree_buf;
}
return ret;
exit_kfree_buf:
#if (MULTIPAGE_SUPPORT == 1)
if (data->writebuf) kfree(data->writebuf);
#endif
exit_kfree:
kfree(data);
return ret;
}
/* Platform dependent --- */
static int qsfp_remove(struct i2c_client *client, struct qsfp_data *data)
{
sfp_sysfs_eeprom_cleanup(&client->dev.kobj, &data->eeprom.bin);
sysfs_remove_group(&client->dev.kobj, &qsfp_group);
kfree(data);
return 0;
}
static int sfp_device_remove(struct i2c_client *client)
{
int ret = 0;
struct sfp_port_data *data = i2c_get_clientdata(client);
if (data->driver_type == DRIVER_TYPE_QSFP) {
ret = qsfp_remove(client, data->qsfp);
}
kfree(data);
return ret;
}
/* Addresses scanned
*/
static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
static struct i2c_driver sfp_driver = {
.driver = {
.name = DRIVER_NAME,
},
.probe = sfp_device_probe,
.remove = sfp_device_remove,
.id_table = sfp_device_id,
.address_list = normal_i2c,
};
static int __init sfp_init(void)
{
return i2c_add_driver(&sfp_driver);
}
static void __exit sfp_exit(void)
{
i2c_del_driver(&sfp_driver);
}
MODULE_AUTHOR("Brandon Chuang <brandon_chuang@accton.com.tw>");
MODULE_DESCRIPTION("accton as7816_64x_sfp driver");
MODULE_LICENSE("GPL");
module_init(sfp_init);
module_exit(sfp_exit);
Reference in New Issue View Git Blame Copy Permalink