5de7ae449a
- Why I did it
Update SDK/FW version - 4.5.3186/2010_3186 in order to have the following changes:
New functionality:
1. Added support for 6.5W (Class 8) in ports 49-50, 53-54, 57-58, and 61-62 on SN4600 system
Fix the following issues:
1. On very rare occasion (~1/100K), during I2C transaction with MMS1V50-WM and MMS1V90-WR modules on SN4700 system, the module may send unexpected stop which violate the I2C specification, possibly affecting the link up flow
2. When running 1GbE speeds on SN4600 system, the port remained active while peer side was closed
3. While toggling the cable with ‘sfputil lpmode on/off’, error msg like “ERR pmon#xcvrd: Receive PMPE error event on module 1: status {X} error type {y}” could be received
4. When toggling many ports of the Spectrum devices while raising 10GbE link up and link maintenance is enabled, the switch may get stuck and may need to be rebooted
5. When trying to reconfigure the Flex Parser header and Flex transition parameters after ISSU, the switch will returned an error even if the configuration was identical to that done before performing the ISSU
6. While moving from lossless to lossy mode while shared headroom was used, reduction of the shared headroom can only be done prior to pool type change and when shared headroom is not utilized
7. SLL configuration is missing in SDK dump
8. If TTL_CMD_COPY is used in Encap direction for a packet with no TTL, then the value passed in the ttl data structure will be used if non-zero (default 255 if zero)
9. PCI calibration changes from a static to a dynamic mechanism
10. Layer 4 port information is not initialized for BFD packet event. To address the issue, remote peer UDP port information was added in BFD packet event
11. SDK returned error when FEC mode is set on twisted pair, when FEC was set to None
- How I did it
Update pointer for the SDK/FW
- How to verify it
Run regression tests
Signed-off-by: dprital <drorp@nvidia.com>
42 lines
1.2 KiB
Makefile
42 lines
1.2 KiB
Makefile
# mellanox asic firmware
|
|
|
|
MLNX_FW_BASE_PATH = $(MLNX_SDK_BASE_PATH)
|
|
|
|
# Place an URL here to FW if you want to download FW instead
|
|
MLNX_FW_BASE_URL =
|
|
|
|
ifneq ($(MLNX_FW_BASE_URL), )
|
|
FW_FROM_URL = y
|
|
else
|
|
FW_FROM_URL = n
|
|
endif
|
|
|
|
MLNX_SPC_FW_VERSION = 13.2010.3186
|
|
MLNX_SPC_FW_FILE = fw-SPC-rel-$(subst .,_,$(MLNX_SPC_FW_VERSION))-EVB.mfa
|
|
$(MLNX_SPC_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
|
|
$(MLNX_SPC_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC_FW_FILE)
|
|
|
|
MLNX_SPC2_FW_VERSION = 29.2010.3186
|
|
MLNX_SPC2_FW_FILE = fw-SPC2-rel-$(subst .,_,$(MLNX_SPC2_FW_VERSION))-EVB.mfa
|
|
$(MLNX_SPC2_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
|
|
$(MLNX_SPC2_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC2_FW_FILE)
|
|
|
|
MLNX_SPC3_FW_VERSION = 30.2010.3186
|
|
MLNX_SPC3_FW_FILE = fw-SPC3-rel-$(subst .,_,$(MLNX_SPC3_FW_VERSION))-EVB.mfa
|
|
$(MLNX_SPC3_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
|
|
$(MLNX_SPC3_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC3_FW_FILE)
|
|
|
|
MLNX_FW_FILES = $(MLNX_SPC_FW_FILE) $(MLNX_SPC2_FW_FILE) $(MLNX_SPC3_FW_FILE)
|
|
|
|
ifeq ($(FW_FROM_URL),n)
|
|
SONIC_COPY_FILES += $(MLNX_FW_FILES)
|
|
else
|
|
SONIC_ONLINE_FILES += $(MLNX_FW_FILES)
|
|
endif
|
|
|
|
MLNX_FILES += $(MLNX_FW_FILES)
|
|
|
|
export MLNX_SPC_FW_FILE
|
|
export MLNX_SPC2_FW_FILE
|
|
export MLNX_SPC3_FW_FILE
|