555 lines
24 KiB
Python
555 lines
24 KiB
Python
# sfputil.py
|
|
#
|
|
# Platform-specific SFP transceiver interface for SONiC
|
|
#
|
|
# For S5296F-ON, hardware version X01
|
|
|
|
try:
|
|
import struct
|
|
import time
|
|
from sonic_sfp.sfputilbase import SfpUtilBase
|
|
from os import *
|
|
from mmap import *
|
|
import io
|
|
from sonic_sfp.sff8436 import sff8436InterfaceId
|
|
from sonic_sfp.sff8436 import sff8436Dom
|
|
from sonic_sfp.sff8472 import sff8472Dom
|
|
|
|
except ImportError as e:
|
|
raise ImportError("%s - required module not found" % str(e))
|
|
|
|
|
|
#definitions of the offset and width for values in DOM info eeprom
|
|
QSFP_DOM_REV_OFFSET = 1
|
|
QSFP_DOM_REV_WIDTH = 1
|
|
QSFP_TEMPE_OFFSET = 22
|
|
QSFP_TEMPE_WIDTH = 2
|
|
QSFP_VOLT_OFFSET = 26
|
|
QSFP_VOLT_WIDTH = 2
|
|
QSFP_CHANNL_MON_OFFSET = 34
|
|
QSFP_CHANNL_MON_WIDTH = 16
|
|
QSFP_CHANNL_MON_WITH_TX_POWER_WIDTH = 24
|
|
QSFP_MODULE_THRESHOLD_OFFSET = 128
|
|
QSFP_MODULE_THRESHOLD_WIDTH = 24
|
|
QSFP_CHANNL_THRESHOLD_OFFSET = 176
|
|
QSFP_CHANNL_THRESHOLD_WIDTH = 16
|
|
QSFP_CHANNL_MON_MASK_OFFSET = 242
|
|
QSFP_CHANNL_MON_MASK_WIDTH = 4
|
|
|
|
SFP_TEMPE_OFFSET = 96
|
|
SFP_TEMPE_WIDTH = 2
|
|
SFP_VOLT_OFFSET = 98
|
|
SFP_VOLT_WIDTH = 2
|
|
SFP_MODULE_THRESHOLD_OFFSET = 0
|
|
SFP_MODULE_THRESHOLD_WIDTH = 56
|
|
|
|
XCVR_DOM_CAPABILITY_OFFSET = 92
|
|
XCVR_DOM_CAPABILITY_WIDTH = 1
|
|
|
|
|
|
class SfpUtil(SfpUtilBase):
|
|
"""Platform-specific SfpUtil class"""
|
|
|
|
PORT_START = 1
|
|
PORT_END = 104
|
|
PORTS_IN_BLOCK = 104
|
|
|
|
BASE_RES_PATH = "/sys/bus/pci/devices/0000:04:00.0/resource0"
|
|
|
|
_port_to_eeprom_mapping = {}
|
|
|
|
|
|
_global_port_pres_dict = {}
|
|
|
|
@property
|
|
def port_start(self):
|
|
return self.PORT_START
|
|
|
|
@property
|
|
def port_end(self):
|
|
return self.PORT_END
|
|
|
|
@property
|
|
def qsfp_ports(self):
|
|
return range(97, self.PORTS_IN_BLOCK + 1)
|
|
|
|
@property
|
|
def port_to_eeprom_mapping(self):
|
|
return self._port_to_eeprom_mapping
|
|
|
|
def pci_mem_read(self, mm, offset):
|
|
mm.seek(offset)
|
|
read_data_stream=mm.read(4)
|
|
reg_val=struct.unpack('I',read_data_stream)
|
|
mem_val = str(reg_val)[1:-2]
|
|
# print "reg_val read:%x"%reg_val
|
|
return mem_val
|
|
|
|
def pci_mem_write(self, mm, offset, data):
|
|
mm.seek(offset)
|
|
# print "data to write:%x"%data
|
|
mm.write(struct.pack('I',data))
|
|
|
|
def pci_set_value(self, resource, val, offset):
|
|
fd = open(resource, O_RDWR)
|
|
mm = mmap(fd, 0)
|
|
val = self.pci_mem_write(mm, offset, val)
|
|
mm.close()
|
|
close(fd)
|
|
return val
|
|
|
|
def pci_get_value(self, resource, offset):
|
|
fd = open(resource, O_RDWR)
|
|
mm = mmap(fd, 0)
|
|
val = self.pci_mem_read(mm, offset)
|
|
mm.close()
|
|
close(fd)
|
|
return val
|
|
|
|
def init_global_port_presence(self):
|
|
for port_num in range(self.port_start, (self.port_end + 1)):
|
|
presence = self.get_presence(port_num)
|
|
if(presence):
|
|
self._global_port_pres_dict[port_num] = '1'
|
|
else:
|
|
self._global_port_pres_dict[port_num] = '0'
|
|
|
|
def __init__(self):
|
|
eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom"
|
|
|
|
for x in range(self.port_start, self.port_end + 1):
|
|
self.port_to_eeprom_mapping[x] = eeprom_path.format(x + 1)
|
|
self.init_global_port_presence()
|
|
SfpUtilBase.__init__(self)
|
|
|
|
def get_presence(self, port_num):
|
|
# Check for invalid port_num
|
|
if port_num < self.port_start or port_num > self.port_end:
|
|
return False
|
|
|
|
# Port offset starts with 0x4004
|
|
port_offset = 16388 + ((port_num-1) * 16)
|
|
|
|
status = self.pci_get_value(self.BASE_RES_PATH, port_offset)
|
|
reg_value = int(status)
|
|
|
|
# Absence of status throws error
|
|
if (reg_value == "" ):
|
|
return False
|
|
|
|
# Mask off bit for presence
|
|
mask = (1 << 1)
|
|
if (port_num > 96):
|
|
mask = (1 << 4)
|
|
|
|
# ModPrsL is active low
|
|
if reg_value & mask == 0:
|
|
return True
|
|
|
|
return False
|
|
|
|
def get_low_power_mode(self, port_num):
|
|
|
|
# Check for invalid port_num
|
|
if port_num < self.port_start or port_num > self.port_end:
|
|
return False
|
|
|
|
# Port offset starts with 0x4000
|
|
port_offset = 16384 + ((port_num-1) * 16)
|
|
|
|
status = self.pci_get_value(self.BASE_RES_PATH, port_offset)
|
|
reg_value = int(status)
|
|
|
|
# Absence of status throws error
|
|
if (reg_value == "" ):
|
|
return False
|
|
|
|
# Mask off 4th bit for presence
|
|
mask = (1 << 6)
|
|
|
|
# LPMode is active high
|
|
if reg_value & mask == 0:
|
|
return False
|
|
|
|
return True
|
|
|
|
def set_low_power_mode(self, port_num, lpmode):
|
|
|
|
# Check for invalid port_num
|
|
if port_num < self.port_start or port_num > self.port_end:
|
|
return False
|
|
|
|
# Port offset starts with 0x4000
|
|
port_offset = 16384 + ((port_num-1) * 16)
|
|
|
|
status = self.pci_get_value(self.BASE_RES_PATH, port_offset)
|
|
reg_value = int(status)
|
|
|
|
# Absence of status throws error
|
|
if (reg_value == "" ):
|
|
return False
|
|
|
|
# Mask off 4th bit for presence
|
|
mask = (1 << 6)
|
|
|
|
# LPMode is active high; set or clear the bit accordingly
|
|
if lpmode is True:
|
|
reg_value = reg_value | mask
|
|
else:
|
|
reg_value = reg_value & ~mask
|
|
|
|
# Convert our register value back to a hex string and write back
|
|
self.pci_set_value(self.BASE_RES_PATH, reg_value, port_offset)
|
|
|
|
return True
|
|
|
|
def reset(self, port_num):
|
|
|
|
# Check for invalid port_num
|
|
if port_num < self.port_start or port_num > self.port_end:
|
|
return False
|
|
|
|
# Port offset starts with 0x4000
|
|
port_offset = 16384 + ((port_num-1) * 16)
|
|
|
|
status = self.pci_get_value(self.BASE_RES_PATH, port_offset)
|
|
reg_value = int(status)
|
|
|
|
# Absence of status throws error
|
|
if (reg_value == "" ):
|
|
return False
|
|
|
|
# Mask off 4th bit for presence
|
|
mask = (1 << 6)
|
|
|
|
# ResetL is active low
|
|
reg_value = reg_value & ~mask
|
|
|
|
# Convert our register value back to a hex string and write back
|
|
self.pci_set_value(self.BASE_RES_PATH, reg_value, port_offset)
|
|
|
|
# Sleep 1 second to allow it to settle
|
|
time.sleep(1)
|
|
|
|
reg_value = reg_value | mask
|
|
|
|
# Convert our register value back to a hex string and write back
|
|
self.pci_set_value(self.BASE_RES_PATH, reg_value, port_offset)
|
|
|
|
return True
|
|
|
|
def get_transceiver_change_event(self, timeout=0):
|
|
port_dict = {}
|
|
sleep_time_ms = 500 # Poll interval, in milliseconds
|
|
sleep_time = sleep_time_ms / 1000.0
|
|
elapsed_time_ms = 0
|
|
while True:
|
|
for port_num in range(self.port_start, (self.port_end + 1)):
|
|
presence = self.get_presence(port_num)
|
|
if(presence and self._global_port_pres_dict[port_num] == '0'):
|
|
self._global_port_pres_dict[port_num] = '1'
|
|
port_dict[port_num] = '1'
|
|
elif(not presence and
|
|
self._global_port_pres_dict[port_num] == '1'):
|
|
self._global_port_pres_dict[port_num] = '0'
|
|
port_dict[port_num] = '0'
|
|
|
|
if(len(port_dict) > 0):
|
|
break
|
|
|
|
if len(port_dict) > 0:
|
|
break
|
|
if timeout != 0:
|
|
elapsed_time_ms += sleep_time_ms
|
|
if elapsed_time_ms > timeout:
|
|
break
|
|
time.sleep(sleep_time)
|
|
|
|
return True, port_dict
|
|
|
|
|
|
def get_transceiver_dom_info_dict(self, port_num):
|
|
transceiver_dom_info_dict = {}
|
|
|
|
dom_info_dict_keys = ['temperature', 'voltage', 'rx1power',
|
|
'rx2power', 'rx3power', 'rx4power',
|
|
'tx1bias', 'tx2bias', 'tx3bias',
|
|
'tx4bias', 'tx1power', 'tx2power',
|
|
'tx3power', 'tx4power',
|
|
]
|
|
transceiver_dom_info_dict = dict.fromkeys(dom_info_dict_keys, 'N/A')
|
|
|
|
if port_num in self.qsfp_ports:
|
|
offset = 0
|
|
offset_xcvr = 128
|
|
file_path = self._get_port_eeprom_path(port_num, self.IDENTITY_EEPROM_ADDR)
|
|
if not self._sfp_eeprom_present(file_path, 0):
|
|
return None
|
|
|
|
try:
|
|
sysfsfile_eeprom = io.open(file_path, mode="rb", buffering=0)
|
|
except IOError:
|
|
print("Error: reading sysfs file %s" % file_path)
|
|
return None
|
|
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return transceiver_dom_info_dict
|
|
|
|
sfpi_obj = sff8436InterfaceId()
|
|
if sfpi_obj is None:
|
|
return transceiver_dom_info_dict
|
|
|
|
# QSFP capability byte parse, through this byte can know whether it support tx_power or not.
|
|
# TODO: in the future when decided to migrate to support SFF-8636 instead of SFF-8436,
|
|
# need to add more code for determining the capability and version compliance
|
|
# in SFF-8636 dom capability definitions evolving with the versions.
|
|
qsfp_dom_capability_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom, (offset_xcvr + XCVR_DOM_CAPABILITY_OFFSET), XCVR_DOM_CAPABILITY_WIDTH)
|
|
if qsfp_dom_capability_raw is not None:
|
|
qspf_dom_capability_data = sfpi_obj.parse_qsfp_dom_capability(qsfp_dom_capability_raw, 0)
|
|
else:
|
|
return transceiver_dom_info_dict
|
|
|
|
dom_temperature_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom, (offset + QSFP_TEMPE_OFFSET), QSFP_TEMPE_WIDTH)
|
|
if dom_temperature_raw is not None:
|
|
dom_temperature_data = sfpd_obj.parse_temperature(dom_temperature_raw, 0)
|
|
else:
|
|
return transceiver_dom_info_dict
|
|
|
|
dom_voltage_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom, (offset + QSFP_VOLT_OFFSET), QSFP_VOLT_WIDTH)
|
|
if dom_voltage_raw is not None:
|
|
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
|
|
else:
|
|
return transceiver_dom_info_dict
|
|
|
|
qsfp_dom_rev_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom, (offset + QSFP_DOM_REV_OFFSET), QSFP_DOM_REV_WIDTH)
|
|
if qsfp_dom_rev_raw is not None:
|
|
qsfp_dom_rev_data = sfpd_obj.parse_sfp_dom_rev(qsfp_dom_rev_raw, 0)
|
|
else:
|
|
return transceiver_dom_info_dict
|
|
|
|
transceiver_dom_info_dict['temperature'] = dom_temperature_data['data']['Temperature']['value']
|
|
transceiver_dom_info_dict['voltage'] = dom_voltage_data['data']['Vcc']['value']
|
|
|
|
# The tx_power monitoring is only available on QSFP which compliant with SFF-8636
|
|
# and claimed that it support tx_power with one indicator bit.
|
|
dom_channel_monitor_data = {}
|
|
qsfp_dom_rev = qsfp_dom_rev_data['data']['dom_rev']['value']
|
|
qsfp_tx_power_support = qspf_dom_capability_data['data']['Tx_power_support']['value']
|
|
if (qsfp_dom_rev[0:8] != 'SFF-8636' or (qsfp_dom_rev[0:8] == 'SFF-8636' and qsfp_tx_power_support != 'on')):
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom, (offset + QSFP_CHANNL_MON_OFFSET), QSFP_CHANNL_MON_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(dom_channel_monitor_raw, 0)
|
|
else:
|
|
return transceiver_dom_info_dict
|
|
|
|
transceiver_dom_info_dict['tx1power'] = 'N/A'
|
|
transceiver_dom_info_dict['tx2power'] = 'N/A'
|
|
transceiver_dom_info_dict['tx3power'] = 'N/A'
|
|
transceiver_dom_info_dict['tx4power'] = 'N/A'
|
|
try:
|
|
sysfsfile_eeprom.close()
|
|
except IOError:
|
|
print("Error: closing sysfs file %s" % file_path)
|
|
return None
|
|
|
|
transceiver_dom_info_dict['temperature'] = dom_temperature_data['data']['Temperature']['value']
|
|
transceiver_dom_info_dict['voltage'] = dom_voltage_data['data']['Vcc']['value']
|
|
transceiver_dom_info_dict['rx1power'] = dom_channel_monitor_data['data']['RX1Power']['value']
|
|
transceiver_dom_info_dict['rx2power'] = dom_channel_monitor_data['data']['RX2Power']['value']
|
|
transceiver_dom_info_dict['rx3power'] = dom_channel_monitor_data['data']['RX3Power']['value']
|
|
transceiver_dom_info_dict['rx4power'] = dom_channel_monitor_data['data']['RX4Power']['value']
|
|
transceiver_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data']['TX1Bias']['value']
|
|
transceiver_dom_info_dict['tx2bias'] = dom_channel_monitor_data['data']['TX2Bias']['value']
|
|
transceiver_dom_info_dict['tx3bias'] = dom_channel_monitor_data['data']['TX3Bias']['value']
|
|
transceiver_dom_info_dict['tx4bias'] = dom_channel_monitor_data['data']['TX4Bias']['value']
|
|
|
|
else:
|
|
offset = 256
|
|
file_path = self._get_port_eeprom_path(port_num, self.DOM_EEPROM_ADDR)
|
|
if not self._sfp_eeprom_present(file_path, 0):
|
|
return None
|
|
|
|
try:
|
|
sysfsfile_eeprom = io.open(file_path,"rb",0)
|
|
except IOError:
|
|
print("Error: reading sysfs file %s" % file_path)
|
|
return None
|
|
|
|
sfpd_obj = sff8472Dom(None,1)
|
|
if sfpd_obj is None:
|
|
return None
|
|
dom_temperature_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom, (offset + SFP_TEMPE_OFFSET),
|
|
SFP_TEMPE_WIDTH)
|
|
if dom_temperature_raw is not None:
|
|
dom_temperature_data = sfpd_obj.parse_temperature(dom_temperature_raw, 0)
|
|
else:
|
|
return transceiver_dom_info_dict
|
|
|
|
dom_voltage_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom, (offset + SFP_VOLT_OFFSET),
|
|
SFP_VOLT_WIDTH)
|
|
if dom_voltage_raw is not None:
|
|
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
|
|
else:
|
|
return transceiver_dom_info_dict
|
|
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom, (offset + SFP_MODULE_THRESHOLD_OFFSET),
|
|
SFP_MODULE_THRESHOLD_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(dom_channel_monitor_raw, 0)
|
|
else:
|
|
return transceiver_dom_info_dict
|
|
|
|
try:
|
|
sysfsfile_eeprom.close()
|
|
except IOError:
|
|
print("Error: closing sysfs file %s" % file_path)
|
|
return None
|
|
|
|
transceiver_dom_info_dict['temperature'] = dom_temperature_data['data']['Temperature']['value']
|
|
transceiver_dom_info_dict['voltage'] = dom_voltage_data['data']['Vcc']['value']
|
|
transceiver_dom_info_dict['rx1power'] = dom_channel_monitor_data['data']['RXPower']['value']
|
|
transceiver_dom_info_dict['rx2power'] = 'N/A'
|
|
transceiver_dom_info_dict['rx3power'] = 'N/A'
|
|
transceiver_dom_info_dict['rx4power'] = 'N/A'
|
|
transceiver_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data']['TXBias']['value']
|
|
transceiver_dom_info_dict['tx2bias'] = 'N/A'
|
|
transceiver_dom_info_dict['tx3bias'] = 'N/A'
|
|
transceiver_dom_info_dict['tx4bias'] = 'N/A'
|
|
transceiver_dom_info_dict['tx1power'] = dom_channel_monitor_data['data']['TXPower']['value']
|
|
transceiver_dom_info_dict['tx2power'] = 'N/A'
|
|
transceiver_dom_info_dict['tx3power'] = 'N/A'
|
|
transceiver_dom_info_dict['tx4power'] = 'N/A'
|
|
|
|
return transceiver_dom_info_dict
|
|
|
|
def get_transceiver_dom_threshold_info_dict(self, port_num):
|
|
transceiver_dom_threshold_info_dict = {}
|
|
dom_info_dict_keys = ['temphighalarm', 'temphighwarning',
|
|
'templowalarm', 'templowwarning',
|
|
'vcchighalarm', 'vcchighwarning',
|
|
'vcclowalarm', 'vcclowwarning',
|
|
'rxpowerhighalarm', 'rxpowerhighwarning',
|
|
'rxpowerlowalarm', 'rxpowerlowwarning',
|
|
'txpowerhighalarm', 'txpowerhighwarning',
|
|
'txpowerlowalarm', 'txpowerlowwarning',
|
|
'txbiashighalarm', 'txbiashighwarning',
|
|
'txbiaslowalarm', 'txbiaslowwarning'
|
|
]
|
|
transceiver_dom_threshold_info_dict = dict.fromkeys(dom_info_dict_keys, 'N/A')
|
|
|
|
if port_num in self.qsfp_ports:
|
|
file_path = self._get_port_eeprom_path(port_num, self.IDENTITY_EEPROM_ADDR)
|
|
if not self._sfp_eeprom_present(file_path, 0):
|
|
return None
|
|
|
|
try:
|
|
sysfsfile_eeprom = io.open(file_path, mode="rb", buffering=0)
|
|
except IOError:
|
|
print("Error: reading sysfs file %s" % file_path)
|
|
return None
|
|
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
# Dom Threshold data starts from offset 384
|
|
# Revert offset back to 0 once data is retrieved
|
|
offset = 384
|
|
dom_module_threshold_raw = self._read_eeprom_specific_bytes(
|
|
sysfsfile_eeprom,
|
|
(offset + QSFP_MODULE_THRESHOLD_OFFSET),
|
|
QSFP_MODULE_THRESHOLD_WIDTH)
|
|
if dom_module_threshold_raw is not None:
|
|
dom_module_threshold_data = sfpd_obj.parse_module_threshold_values(dom_module_threshold_raw, 0)
|
|
else:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
dom_channel_threshold_raw = self._read_eeprom_specific_bytes(
|
|
sysfsfile_eeprom,
|
|
(offset + QSFP_CHANNL_THRESHOLD_OFFSET),
|
|
QSFP_CHANNL_THRESHOLD_WIDTH)
|
|
if dom_channel_threshold_raw is not None:
|
|
dom_channel_threshold_data = sfpd_obj.parse_channel_threshold_values(dom_channel_threshold_raw, 0)
|
|
else:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
try:
|
|
sysfsfile_eeprom.close()
|
|
except IOError:
|
|
print("Error: closing sysfs file %s" % file_path)
|
|
return None
|
|
|
|
# Threshold Data
|
|
transceiver_dom_threshold_info_dict['temphighalarm'] = dom_module_threshold_data['data']['TempHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['temphighwarning'] = dom_module_threshold_data['data']['TempHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['templowalarm'] = dom_module_threshold_data['data']['TempLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['templowwarning'] = dom_module_threshold_data['data']['TempLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighalarm'] = dom_module_threshold_data['data']['VccHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighwarning'] = dom_module_threshold_data['data']['VccHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowalarm'] = dom_module_threshold_data['data']['VccLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowwarning'] = dom_module_threshold_data['data']['VccLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighalarm'] = dom_channel_threshold_data['data']['RxPowerHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighwarning'] = dom_channel_threshold_data['data']['RxPowerHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowalarm'] = dom_channel_threshold_data['data']['RxPowerLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowwarning'] = dom_channel_threshold_data['data']['RxPowerLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighalarm'] = dom_channel_threshold_data['data']['TxBiasHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighwarning'] = dom_channel_threshold_data['data']['TxBiasHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowalarm'] = dom_channel_threshold_data['data']['TxBiasLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowwarning'] = dom_channel_threshold_data['data']['TxBiasLowWarning']['value']
|
|
|
|
else:
|
|
offset = 256
|
|
file_path = self._get_port_eeprom_path(port_num, self.DOM_EEPROM_ADDR)
|
|
if not self._sfp_eeprom_present(file_path, 0):
|
|
return None
|
|
|
|
try:
|
|
sysfsfile_eeprom = io.open(file_path,"rb",0)
|
|
except IOError:
|
|
print("Error: reading sysfs file %s" % file_path)
|
|
return None
|
|
|
|
sfpd_obj = sff8472Dom(None,1)
|
|
if sfpd_obj is None:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
dom_module_threshold_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom,
|
|
(offset + SFP_MODULE_THRESHOLD_OFFSET), SFP_MODULE_THRESHOLD_WIDTH)
|
|
|
|
if dom_module_threshold_raw is not None:
|
|
dom_module_threshold_data = sfpd_obj.parse_alarm_warning_threshold(dom_module_threshold_raw, 0)
|
|
else:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
try:
|
|
sysfsfile_eeprom.close()
|
|
except IOError:
|
|
print("Error: closing sysfs file %s" % file_path)
|
|
return None
|
|
|
|
#Threshold Data
|
|
transceiver_dom_threshold_info_dict['temphighalarm'] = dom_module_threshold_data['data']['TempHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['templowalarm'] = dom_module_threshold_data['data']['TempLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['temphighwarning'] = dom_module_threshold_data['data']['TempHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['templowwarning'] = dom_module_threshold_data['data']['TempLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighalarm'] = dom_module_threshold_data['data']['VoltageHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowalarm'] = dom_module_threshold_data['data']['VoltageLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighwarning'] = dom_module_threshold_data['data']['VoltageHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowwarning'] = dom_module_threshold_data['data']['VoltageLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighalarm'] = dom_module_threshold_data['data']['BiasHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowalarm'] = dom_module_threshold_data['data']['BiasLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighwarning'] = dom_module_threshold_data['data']['BiasHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowwarning'] = dom_module_threshold_data['data']['BiasLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerhighalarm'] = dom_module_threshold_data['data']['TXPowerHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerlowalarm'] = dom_module_threshold_data['data']['TXPowerLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerhighwarning'] = dom_module_threshold_data['data']['TXPowerHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerlowwarning'] = dom_module_threshold_data['data']['TXPowerLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighalarm'] = dom_module_threshold_data['data']['RXPowerHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowalarm'] = dom_module_threshold_data['data']['RXPowerLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighwarning'] = dom_module_threshold_data['data']['RXPowerHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowwarning'] = dom_module_threshold_data['data']['RXPowerLowWarning']['value']
|
|
|
|
return transceiver_dom_threshold_info_dict
|
|
|