9580b0407f
- Why I did it The sai.profile file in kvm images overrides the warmboot file with path /var/cache/sai_warmboot.bin. Since the directory /var/cache is not mounted in syncd, it will be cleared in an image upgrade, the warm-reboot image upgrade will fail if the file is put in the directory. Fix #6183 - How I did it Remove the path that overrides the default path. The warmboot file path will then be the default value /var/warmboot/sai-warmboot.bin. Since /var/warmboot/ is mounted by /host/warmboot/ in the host, it could survive an image upgrade. - How to verify it Tested warm reboot upgrading kvm image locally. |
||
|---|---|---|
| .. | ||
| brcm_gearbox_vs | ||
| msft_multi_asic_vs | ||
| plugins | ||
| asic.conf | ||
| default_sku | ||
| installer.conf | ||
| pmon_daemon_control.json | ||
| README.md | ||
Changing the virtual device
You can control the hw sku and default factory configuration for the VS image by modifying the content of the file default_sku in this directory.
The format of default_sku is a single line:
<hw_key> <default_preset>
Allowable values for hw_key
| hw_key | Device |
|---|---|
| Force10-S6000 | Dell Force10 S6000 |
| brcm_gearbox_vs | Similar to Force10-S6000, but implements a virtual BRCM81724 Gearbox Phy |
Allowable values for default_preset
These include "t1", "l2", and "empty". See the file sonic-buildimage/src/sonic-config-engine/config_samples.py for details on how each default_preset value is interpreted.
Changing the hwsku of an existing VS switch
To change the default hwsku for a VS image that has already been built and installed, follow these steps:
-
Edit /usr/share/sonic/device/x86_64-kvm_x86_64-r0/default_sku. For details, see the section below (Device Specific Documentation)
-
Edit /etc/sonic/config_db.json, and change the "hwsku" key in DEVICE_METADATA:localhost to match the hw_key used in default_sku. Example:
"DEVICE_METADATA": { "localhost": { ... "hwsku": "brcm_gearbox_vs", ... } }, ...
-
Reboot the switch
-
Use "show platform summary" to verify, and follow any steps specific to the platform, as needed, such as those described below for the brcm_gearbox_vs hwsku.
Device Specific Documentation
For general info on building, see https://github.com/Azure/sonic-buildimage/blob/master/README.md
Force-10-S6000
This is the default VS for SONiC. To enable, set contents of default_sku to:
Force10-S6000 t1
To build:
make init
make configure PLATFORM=vs
make target/sonic-vs.img.gz
brcm_gearbox_vs
This sku simulates a device with a Broadcom BRCM81724 gearbox PHY. To enable, set default_sku to:
brcm_gearbox_vs t1
To build (same as Force-10-S6000):
make init
make configure PLATFORM=vs
make target/sonic-vs.img.gz
To verify, install and bring up SONiC. There will be a new gbsyncd docker which is designed to respond to configuration directed towards the gearbox phy "switch". swss will create that gearbox switch on startup after detecting the gearbox is present (this is done by a short lived gearsyncd that runs in the swss docker).
The commands "show gearbox interfaces status" and "show gearbox phys status" can be used to verify the virtual gearbox phy has been created. See https://github.com/Azure/sonic-utilities/blob/master/doc/Command-Reference.md#gearbox for details.