9eef01d7a7
For 40G optics there is SAI handling of T0 facing ports to be set with SR4 type and unreliable los set for a fixed set of ports. For this property to be invoked the requirement is set phy_unlos_msft=1 in config.bcm. This change is to meet the requirement and once this property is set, the los/interface type settings is applied by SAI on the required ports. Why I did it For Arista-7060CX-32S-Q32 T1, 40G ports RX_ERR minimalization during connected device reboot can be achieved by turning on Unreliable LOS and SR4 media_type for all ports which are connected to T0. The property phy_unlos_msft=1 is to exclusively enable this property. Microsoft ADO: 25941176 How I did it Changes in SAI and turning on property How to verify it Ran the changes on a testbed and verified configurations are as intended. with property admin@sonic2:~$ bcmcmd "phy diag xe8 dsc config" | grep -C 2 "LOS" Brdfe_on = 0 Media Type = 2 Unreliable LOS = 1 Scrambling Disable = 0 Lane Config from PCS = 0 without property admin@sonic:~$ bcmcmd "phy diag xe8 dsc config" | grep -C 2 "LOS" Brdfe_on = 0 Media Type = 0 Unreliable LOS = 0 Scrambling Disable = 0 Lane Config from PCS = 0 Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com> |
||
|---|---|---|
| .. | ||
| BALANCED | ||
| buffer_ports_t0.j2 | ||
| buffer_ports_t1.j2 | ||
| buffers_defaults_t0.j2 | ||
| buffers_defaults_t1.j2 | ||
| buffers.json.j2 | ||
| pg_profile_lookup.ini | ||
| port_config.ini | ||
| qos.json.j2 | ||
| RDMA-CENTRIC | ||
| sai.profile.j2 | ||
| TCP-CENTRIC | ||
| th-a7060-cx32s-32x40G-t0.config.bcm | ||
| th-a7060-cx32s-32x40G-t1.config.bcm | ||