fe7eeed051
* [Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com> Conflicts: platform/mellanox/mlnx-sai.mk * Fix issue: unprintable character is rendered when handling comments in j2 Use "{#-" and "-#}" to mark comments in jinja template Signed-off-by: Stephen Sun <stephens@nvidia.com> --------- Signed-off-by: Stephen Sun <stephens@nvidia.com> Co-authored-by: Stephen Sun <stephens@nvidia.com>
21 lines
781 B
Plaintext
21 lines
781 B
Plaintext
# DPKG FRK
|
|
|
|
DEP_FILES := $(SONIC_COMMON_FILES_LIST) $(PLATFORM_PATH)/fw.mk $(PLATFORM_PATH)/fw.dep
|
|
DEP_FILES += $(SONIC_COMMON_BASE_FILES_LIST)
|
|
|
|
$(MLNX_SPC_FW_FILE)_CACHE_MODE := GIT_CONTENT_SHA
|
|
$(MLNX_SPC_FW_FILE)_DEP_FLAGS := $(SONIC_COMMON_FLAGS_LIST)
|
|
$(MLNX_SPC_FW_FILE)_DEP_FILES := $(DEP_FILES)
|
|
|
|
$(MLNX_SPC2_FW_FILE)_CACHE_MODE := GIT_CONTENT_SHA
|
|
$(MLNX_SPC2_FW_FILE)_DEP_FLAGS := $(SONIC_COMMON_FLAGS_LIST)
|
|
$(MLNX_SPC2_FW_FILE)_DEP_FILES := $(DEP_FILES)
|
|
|
|
$(MLNX_SPC3_FW_FILE)_CACHE_MODE := GIT_CONTENT_SHA
|
|
$(MLNX_SPC3_FW_FILE)_DEP_FLAGS := $(SONIC_COMMON_FLAGS_LIST)
|
|
$(MLNX_SPC3_FW_FILE)_DEP_FILES := $(DEP_FILES)
|
|
|
|
$(MLNX_SPC4_FW_FILE)_CACHE_MODE := GIT_CONTENT_SHA
|
|
$(MLNX_SPC4_FW_FILE)_DEP_FLAGS := $(SONIC_COMMON_FLAGS_LIST)
|
|
$(MLNX_SPC4_FW_FILE)_DEP_FILES := $(DEP_FILES)
|