matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
89772b6bdc
sonic-buildimage/platform/mellanox/mlnx-platform-api/sonic_platform/sfp.py
Kebo Liu 7ac590b5c5
[Mellanox] Enhance Platform API to support SN2201 - RJ45 ports and new components mgmt. (#10377) 
* Support new platform SN2201 and RJ45 port

Signed-off-by: Kebo Liu <kebol@nvidia.com>

* remove unused import and redundant function

Signed-off-by: Kebo Liu <kebol@nvidia.com>

* fix error introduced by rebase

Signed-off-by: Kebo Liu <kebol@nvidia.com>

* Revert the special handling of RJ45 ports (#56)

* Revert the special handling of RJ45 ports

sfp.py
sfp_event.py
chassis.py

Signed-off-by: Stephen Sun <stephens@nvidia.com>

* Remove deadcode

Signed-off-by: Stephen Sun <stephens@nvidia.com>

* Support CPLD update for SN2201

A new class is introduced, deriving from ComponentCPLD and overloading _install_firmware
Change _install_firmware from private (starting with __) to protected, making it overloadable

Signed-off-by: Stephen Sun <stephens@nvidia.com>

* Initialize component BIOS/CPLD

Signed-off-by: Stephen Sun <stephens@nvidia.com>

* Remove swb_amb which doesn't on DVT board any more

Signed-off-by: Stephen Sun <stephens@nvidia.com>

* Remove the unexisted sensor - switch board ambient - from platform.json

Signed-off-by: Stephen Sun <stephens@nvidia.com>

* Do not report error on receiving unknown status on RJ45 ports

Translate it to disconnect for RJ45 ports
Report error for xSFP ports

Signed-off-by: Stephen Sun <stephens@nvidia.com>

* Add reinit for RJ45 to avoid exception

Signed-off-by: Stephen Sun <stephens@nvidia.com>

Co-authored-by: Stephen Sun <5379172+stephenxs@users.noreply.github.com>
Co-authored-by: Stephen Sun <stephens@nvidia.com>
2022-06-20 19:12:20 -07:00

1023 lines
44 KiB
Python
Raw Blame History

#
# Copyright (c) 2019-2021 NVIDIA CORPORATION & AFFILIATES.
# Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
#############################################################################
# Mellanox
#
# Module contains an implementation of SONiC Platform Base API and
# provides the FANs status which are available in the platform
#
#############################################################################
try:
import subprocess
import os
from sonic_platform_base.sonic_eeprom import eeprom_dts
from sonic_py_common.logger import Logger
from . import utils
from .device_data import DeviceDataManager
from sonic_platform_base.sonic_xcvr.sfp_optoe_base import SfpOptoeBase
except ImportError as e:
raise ImportError (str(e) + "- required module not found")
try:
# python_sdk_api does not support python3 for now. Daemons like thermalctld or psud
# also import this file without actually use the sdk lib. So we catch the ImportError
# and ignore it here. Meanwhile, we have to trigger xcvrd using python2 now because it
# uses the sdk lib.
from python_sdk_api.sxd_api import *
from python_sdk_api.sx_api import *
except ImportError as e:
pass
try:
if os.environ["PLATFORM_API_UNIT_TESTING"] == "1":
# Unable to import SDK constants under unit test
# Define them here
SX_PORT_MODULE_STATUS_INITIALIZING = 0
SX_PORT_MODULE_STATUS_PLUGGED = 1
SX_PORT_MODULE_STATUS_UNPLUGGED = 2
SX_PORT_MODULE_STATUS_PLUGGED_WITH_ERROR = 3
SX_PORT_MODULE_STATUS_PLUGGED_DISABLED = 4
except KeyError:
pass
# identifier value of xSFP module which is in the first byte of the EEPROM
# if the identifier value falls into SFP_TYPE_CODE_LIST the module is treated as a SFP module and parsed according to 8472
# for QSFP_TYPE_CODE_LIST the module is treated as a QSFP module and parsed according to 8436/8636
# Originally the type (SFP/QSFP) of each module is determined according to the SKU dictionary
# where the type of each FP port is defined. The content of EEPROM is parsed according to its type.
# However, sometimes the SFP module can be fit in an adapter and then pluged into a QSFP port.
# In this case the EEPROM content is in format of SFP but parsed as QSFP, causing failure.
# To resolve that issue the type field of the xSFP module is also fetched so that we can know exectly what type the
# module is. Currently only the following types are recognized as SFP/QSFP module.
# Meanwhile, if the a module's identifier value can't be recognized, it will be parsed according to the SKU dictionary.
# This is because in the future it's possible that some new identifier value which is not regonized but backward compatible
# with the current format and by doing so it can be parsed as much as possible.
SFP_TYPE_CODE_LIST = [
'03' # SFP/SFP+/SFP28
]
QSFP_TYPE_CODE_LIST = [
'0d', # QSFP+ or later
'11' # QSFP28 or later
]
QSFP_DD_TYPE_CODE_LIST = [
'18' # QSFP-DD Double Density 8X Pluggable Transceiver
]
RJ45_TYPE = "RJ45"
#variables for sdk
REGISTER_NUM = 1
DEVICE_ID = 1
SWITCH_ID = 0
SX_PORT_ATTR_ARR_SIZE = 64
PMAOS_ASE = 1
PMAOS_EE = 1
PMAOS_E = 2
PMAOS_RST = 0
PMAOS_ENABLE = 1
PMAOS_DISABLE = 2
PMMP_LPMODE_BIT = 8
MCION_TX_DISABLE_BIT = 1
#on page 0
#i2c address 0x50
MCIA_ADDR_TX_CHANNEL_DISABLE = 86
MCIA_ADDR_POWER_OVERRIDE = 93
#power set bit
MCIA_ADDR_POWER_OVERRIDE_PS_BIT = 1
#power override bit
MCIA_ADDR_POWER_OVERRIDE_POR_BIT = 0
#on page 0
#i2c address 0x51
MCIA_ADDR_TX_DISABLE = 110
MCIA_ADDR_TX_DISABLE_BIT = 6
PORT_TYPE_NVE = 8
PORT_TYPE_CPU = 4
PORT_TYPE_OFFSET = 28
PORT_TYPE_MASK = 0xF0000000
NVE_MASK = PORT_TYPE_MASK & (PORT_TYPE_NVE << PORT_TYPE_OFFSET)
CPU_MASK = PORT_TYPE_MASK & (PORT_TYPE_CPU << PORT_TYPE_OFFSET)
# parameters for SFP presence
SFP_STATUS_INSERTED = '1'
# SFP constants
SFP_PAGE_SIZE = 256
SFP_UPPER_PAGE_OFFSET = 128
SFP_VENDOR_PAGE_START = 640
BYTES_IN_DWORD = 4
# Global logger class instance
logger = Logger()
# SDK initializing stuff, called from chassis
def initialize_sdk_handle():
rc, sdk_handle = sx_api_open(None)
if (rc != SX_STATUS_SUCCESS):
logger.log_warning("Failed to open api handle, please check whether SDK is running.")
sdk_handle = None
return sdk_handle
def deinitialize_sdk_handle(sdk_handle):
if sdk_handle is not None:
rc = sx_api_close(sdk_handle)
if (rc != SX_STATUS_SUCCESS):
logger.log_warning("Failed to close api handle.")
return rc == SXD_STATUS_SUCCESS
else:
logger.log_warning("Sdk handle is none")
return False
class MlxregManager:
def __init__(self, mst_pci_device, slot_id, sdk_index):
self.mst_pci_device = mst_pci_device
self.slot_id = slot_id
self.sdk_index = sdk_index
def construct_dword(self, write_buffer):
if len(write_buffer) == 0:
return None
used_bytes_in_dword = len(write_buffer) % BYTES_IN_DWORD
res = "dword[0]=0x"
for idx, x in enumerate(write_buffer):
word = hex(x)[2:]
if (idx > 0) and (idx % BYTES_IN_DWORD) == 0:
res += ",dword[{}]=0x".format(str((idx + 1)//BYTES_IN_DWORD))
res += word.zfill(2)
if used_bytes_in_dword > 0:
res += (BYTES_IN_DWORD - used_bytes_in_dword) * "00"
return res
def write_mlxreg_eeprom(self, num_bytes, dword, device_address, page):
if not dword:
return False
try:
cmd = "mlxreg -d /dev/mst/{} --reg_name MCIA --indexes \
slot_index={},module={},device_address={},page_number={},i2c_device_address=0x50,size={},bank_number=0 \
--set {} -y".format(self.mst_pci_device, self.slot_id, self.sdk_index, device_address, page, num_bytes, dword)
subprocess.check_call(cmd, shell=True, universal_newlines=True, stdout=subprocess.DEVNULL)
except subprocess.CalledProcessError as e:
logger.log_error("Error! Unable to write data dword={} for {} port, page {} offset {}, rc = {}, err msg: {}".format(dword, self.sdk_index, page, device_address, e.returncode, e.output))
return False
return True
def read_mlxred_eeprom(self, offset, page, num_bytes):
try:
cmd = "mlxreg -d /dev/mst/{} --reg_name MCIA --indexes \
slot_index={},module={},device_address={},page_number={},i2c_device_address=0x50,size={},bank_number=0 \
--get".format(self.mst_pci_device, self.slot_id, self.sdk_index, offset, page, num_bytes)
result = subprocess.check_output(cmd, universal_newlines=True, shell=True)
except subprocess.CalledProcessError as e:
logger.log_error("Error! Unable to read data for {} port, page {} offset {}, rc = {}, err msg: {}".format(self.sdk_index, page, offset, e.returncode, e.output))
return None
return result
def parse_mlxreg_read_output(self, read_output, num_bytes):
if not read_output:
return None
res = ""
dword_num = num_bytes // BYTES_IN_DWORD
used_bytes_in_dword = num_bytes % BYTES_IN_DWORD
arr = [value for value in read_output.split('\n') if value[0:5] == "dword"]
for i in range(dword_num):
dword = arr[i].split()[2]
res += dword[2:]
if used_bytes_in_dword > 0:
# Cut needed info and insert into final hex string
# Example: 3 bytes : 0x12345600
# ^ ^
dword = arr[dword_num].split()[2]
res += dword[2 : 2 + used_bytes_in_dword * 2]
return bytearray.fromhex(res) if res else None
class SdkHandleContext(object):
def __init__(self):
self.sdk_handle = None
def __enter__(self):
self.sdk_handle = initialize_sdk_handle()
return self.sdk_handle
def __exit__(self, exc_type, exc_val, exc_tb):
deinitialize_sdk_handle(self.sdk_handle)
class NvidiaSFPCommon(SfpOptoeBase):
def __init__(self, sfp_index):
super(NvidiaSFPCommon, self).__init__()
self.index = sfp_index + 1
self.sdk_index = sfp_index
@property
def sdk_handle(self):
if not SFP.shared_sdk_handle:
SFP.shared_sdk_handle = initialize_sdk_handle()
if not SFP.shared_sdk_handle:
logger.log_error('Failed to open SDK handle')
return SFP.shared_sdk_handle
@classmethod
def _get_module_info(self, sdk_handle, sdk_index):
"""
Get error code of the SFP module
Returns:
The error code fetch from SDK API
"""
module_id_info_list = new_sx_mgmt_module_id_info_t_arr(1)
module_info_list = new_sx_mgmt_phy_module_info_t_arr(1)
module_id_info = sx_mgmt_module_id_info_t()
module_id_info.slot_id = 0
module_id_info.module_id = sdk_index
sx_mgmt_module_id_info_t_arr_setitem(module_id_info_list, 0, module_id_info)
rc = sx_mgmt_phy_module_info_get(sdk_handle, module_id_info_list, 1, module_info_list)
assert SX_STATUS_SUCCESS == rc, "sx_mgmt_phy_module_info_get failed, error code {}".format(rc)
mod_info = sx_mgmt_phy_module_info_t_arr_getitem(module_info_list, 0)
return mod_info.module_state.oper_state, mod_info.module_state.error_type
class SFP(NvidiaSFPCommon):
"""Platform-specific SFP class"""
shared_sdk_handle = None
SFP_MLNX_ERROR_DESCRIPTION_LONGRANGE_NON_MLNX_CABLE = 'Long range for non-Mellanox cable or module'
SFP_MLNX_ERROR_DESCRIPTION_ENFORCE_PART_NUMBER_LIST = 'Enforce part number list'
SFP_MLNX_ERROR_DESCRIPTION_PMD_TYPE_NOT_ENABLED = 'PMD type not enabled'
SFP_MLNX_ERROR_DESCRIPTION_PCIE_POWER_SLOT_EXCEEDED = 'PCIE system power slot exceeded'
SFP_MLNX_ERROR_DESCRIPTION_RESERVED = 'Reserved'
SFP_MLNX_ERROR_BIT_LONGRANGE_NON_MLNX_CABLE = 0x00010000
SFP_MLNX_ERROR_BIT_ENFORCE_PART_NUMBER_LIST = 0x00020000
SFP_MLNX_ERROR_BIT_PMD_TYPE_NOT_ENABLED = 0x00040000
SFP_MLNX_ERROR_BIT_PCIE_POWER_SLOT_EXCEEDED = 0x00080000
SFP_MLNX_ERROR_BIT_RESERVED = 0x80000000
def __init__(self, sfp_index, sfp_type=None, slot_id=0, linecard_port_count=0, lc_name=None):
super(SFP, self).__init__(sfp_index)
self._sfp_type = sfp_type
if slot_id == 0: # For non-modular chassis
from .thermal import initialize_sfp_thermal
self._thermal_list = initialize_sfp_thermal(sfp_index)
else: # For modular chassis
# (slot_id % MAX_LC_CONUNT - 1) * MAX_PORT_COUNT + (sfp_index + 1) * (MAX_PORT_COUNT / LC_PORT_COUNT)
max_linecard_count = DeviceDataManager.get_linecard_count()
max_linecard_port_count = DeviceDataManager.get_linecard_max_port_count()
self.index = (slot_id % max_linecard_count - 1) * max_linecard_port_count + sfp_index * (max_linecard_port_count / linecard_port_count) + 1
self.sdk_index = sfp_index
from .thermal import initialize_linecard_sfp_thermal
self._thermal_list = initialize_linecard_sfp_thermal(lc_name, slot_id, sfp_index)
self.slot_id = slot_id
self.mst_pci_device = self.get_mst_pci_device()
# get MST PCI device name
def get_mst_pci_device(self):
device_name = None
try:
device_name = subprocess.check_output("ls /dev/mst/ | grep pciconf", universal_newlines=True, shell=True).strip()
except subprocess.CalledProcessError as e:
logger.log_error("Failed to find mst PCI device rc={} err.msg={}".format(e.returncode, e.output))
return device_name
'''
@property
def sdk_handle(self):
if not SFP.shared_sdk_handle:
SFP.shared_sdk_handle = initialize_sdk_handle()
if not SFP.shared_sdk_handle:
logger.log_error('Failed to open SDK handle')
return SFP.shared_sdk_handle
'''
def reinit(self):
"""
Re-initialize this SFP object when a new SFP inserted
:return:
"""
self.refresh_xcvr_api()
def get_presence(self):
"""
Retrieves the presence of the device
Returns:
bool: True if device is present, False if not
"""
eeprom_raw = self.read_eeprom(0, 1)
return eeprom_raw is not None
# Read out any bytes from any offset
def _read_eeprom_specific_bytes(self, offset, num_bytes):
if offset + num_bytes > SFP_VENDOR_PAGE_START:
logger.log_error("Error mismatch between page size and bytes to read (offset: {} num_bytes: {}) ".format(offset, num_bytes))
return None
eeprom_raw = []
ethtool_cmd = "ethtool -m sfp{} hex on offset {} length {}".format(self.index, offset, num_bytes)
try:
output = subprocess.check_output(ethtool_cmd,
shell=True,
universal_newlines=True)
output_lines = output.splitlines()
first_line_raw = output_lines[0]
if "Offset" in first_line_raw:
for line in output_lines[2:]:
line_split = line.split()
eeprom_raw = eeprom_raw + line_split[1:]
except subprocess.CalledProcessError as e:
return None
eeprom_raw = list(map(lambda h: int(h, base=16), eeprom_raw))
return bytearray(eeprom_raw)
# read eeprom specfic bytes beginning from offset with size as num_bytes
def read_eeprom(self, offset, num_bytes):
"""
Read eeprom specfic bytes beginning from a random offset with size as num_bytes
Returns:
bytearray, if raw sequence of bytes are read correctly from the offset of size num_bytes
None, if the read_eeprom fails
Example:
mlxreg -d /dev/mst/mt52100_pciconf0 --reg_name MCIA --indexes slot_index=0,module=1,device_address=148,page_number=0,i2c_device_address=0x50,size=16,bank_number=0 -g
Sending access register...
Field Name | Data
===================================
status | 0x00000000
slot_index | 0x00000000
module | 0x00000001
l | 0x00000000
device_address | 0x00000094
page_number | 0x00000000
i2c_device_address | 0x00000050
size | 0x00000010
bank_number | 0x00000000
dword[0] | 0x43726564
dword[1] | 0x6f202020
dword[2] | 0x20202020
dword[3] | 0x20202020
dword[4] | 0x00000000
dword[5] | 0x00000000
....
16 bytes to read from dword -> 0x437265646f2020202020202020202020 -> Credo
"""
# recalculate offset and page. Use 'ethtool' if there is no need to read vendor pages
if offset < SFP_VENDOR_PAGE_START:
return self._read_eeprom_specific_bytes(offset, num_bytes)
else:
page = (offset - SFP_PAGE_SIZE) // SFP_UPPER_PAGE_OFFSET + 1
# calculate offset per page
device_address = (offset - SFP_PAGE_SIZE) % SFP_UPPER_PAGE_OFFSET + SFP_UPPER_PAGE_OFFSET
if not self.mst_pci_device:
return None
mlxreg_mngr = MlxregManager(self.mst_pci_device, self.slot_id, self.sdk_index)
read_output = mlxreg_mngr.read_mlxred_eeprom(device_address, page, num_bytes)
return mlxreg_mngr.parse_mlxreg_read_output(read_output, num_bytes)
# write eeprom specfic bytes beginning from offset with size as num_bytes
def write_eeprom(self, offset, num_bytes, write_buffer):
"""
write eeprom specfic bytes beginning from a random offset with size as num_bytes
and write_buffer as the required bytes
Returns:
Boolean, true if the write succeeded and false if it did not succeed.
Example:
mlxreg -d /dev/mst/mt52100_pciconf0 --reg_name MCIA --indexes slot_index=0,module=1,device_address=154,page_number=5,i2c_device_address=0x50,size=1,bank_number=0 --set dword[0]=0x01000000 -y
"""
if num_bytes != len(write_buffer):
logger.log_error("Error mismatch between buffer length and number of bytes to be written")
return False
# recalculate offset and page
if offset < SFP_PAGE_SIZE:
page = 0
device_address = offset
else:
page = (offset - SFP_PAGE_SIZE) // SFP_UPPER_PAGE_OFFSET + 1
# calculate offset per page
device_address = (offset - SFP_PAGE_SIZE) % SFP_UPPER_PAGE_OFFSET + SFP_UPPER_PAGE_OFFSET
if not self.mst_pci_device:
return False
mlxreg_mngr = MlxregManager(self.mst_pci_device, self.slot_id, self.sdk_index)
dword = mlxreg_mngr.construct_dword(write_buffer)
return mlxreg_mngr.write_mlxreg_eeprom(num_bytes, dword, device_address, page)
@classmethod
def mgmt_phy_mod_pwr_attr_get(cls, power_attr_type, sdk_handle, sdk_index, slot_id):
sx_mgmt_phy_mod_pwr_attr_p = new_sx_mgmt_phy_mod_pwr_attr_t_p()
sx_mgmt_phy_mod_pwr_attr = sx_mgmt_phy_mod_pwr_attr_t()
sx_mgmt_phy_mod_pwr_attr.power_attr_type = power_attr_type
sx_mgmt_phy_mod_pwr_attr_t_p_assign(sx_mgmt_phy_mod_pwr_attr_p, sx_mgmt_phy_mod_pwr_attr)
module_id_info = sx_mgmt_module_id_info_t()
module_id_info.slot_id = slot_id
module_id_info.module_id = sdk_index
try:
rc = sx_mgmt_phy_module_pwr_attr_get(sdk_handle, module_id_info, sx_mgmt_phy_mod_pwr_attr_p)
assert SX_STATUS_SUCCESS == rc, "sx_mgmt_phy_module_pwr_attr_get failed {}".format(rc)
sx_mgmt_phy_mod_pwr_attr = sx_mgmt_phy_mod_pwr_attr_t_p_value(sx_mgmt_phy_mod_pwr_attr_p)
pwr_mode_attr = sx_mgmt_phy_mod_pwr_attr.pwr_mode_attr
return pwr_mode_attr.admin_pwr_mode_e, pwr_mode_attr.oper_pwr_mode_e
finally:
delete_sx_mgmt_phy_mod_pwr_attr_t_p(sx_mgmt_phy_mod_pwr_attr_p)
def get_lpmode(self):
"""
Retrieves the lpmode (low power mode) status of this SFP
Returns:
A Boolean, True if lpmode is enabled, False if disabled
"""
if utils.is_host():
# To avoid performance issue,
# call class level method to avoid initialize the whole sonic platform API
get_lpmode_code = 'from sonic_platform import sfp;\n' \
'with sfp.SdkHandleContext() as sdk_handle:' \
'print(sfp.SFP._get_lpmode(sdk_handle, {}, {}))'.format(self.sdk_index, self.slot_id)
lpm_cmd = "docker exec pmon python3 -c \"{}\"".format(get_lpmode_code)
try:
output = subprocess.check_output(lpm_cmd, shell=True, universal_newlines=True)
return 'True' in output
except subprocess.CalledProcessError as e:
print("Error! Unable to get LPM for {}, rc = {}, err msg: {}".format(self.sdk_index, e.returncode, e.output))
return False
else:
return self._get_lpmode(self.sdk_handle, self.sdk_index, self.slot_id)
@classmethod
def _get_lpmode(cls, sdk_handle, sdk_index, slot_id):
"""Class level method to get low power mode.
Args:
sdk_handle: SDK handle
sdk_index (integer): SDK port index
slot_id (integer): Slot ID
Returns:
[boolean]: True if low power mode is on else off
"""
_, oper_pwr_mode = cls.mgmt_phy_mod_pwr_attr_get(SX_MGMT_PHY_MOD_PWR_ATTR_PWR_MODE_E, sdk_handle, sdk_index, slot_id)
return oper_pwr_mode == SX_MGMT_PHY_MOD_PWR_MODE_LOW_E
def reset(self):
"""
Reset SFP and return all user module settings to their default state.
Returns:
A boolean, True if successful, False if not
refer plugins/sfpreset.py
"""
if utils.is_host():
# To avoid performance issue,
# call class level method to avoid initialize the whole sonic platform API
reset_code = 'from sonic_platform import sfp;\n' \
'with sfp.SdkHandleContext() as sdk_handle:' \
'print(sfp.SFP._reset(sdk_handle, {}, {}))' \
.format(self.sdk_index, self.slot_id)
reset_cmd = "docker exec pmon python3 -c \"{}\"".format(reset_code)
try:
output = subprocess.check_output(reset_cmd, shell=True, universal_newlines=True)
return 'True' in output
except subprocess.CalledProcessError as e:
print("Error! Unable to set LPM for {}, rc = {}, err msg: {}".format(self.sdk_index, e.returncode, e.output))
return False
else:
return self._reset(self.sdk_handle, self.sdk_index, self.slot_id)
@classmethod
def _reset(cls, sdk_handle, sdk_index, slot_id):
module_id_info = sx_mgmt_module_id_info_t()
module_id_info.slot_id = slot_id
module_id_info.module_id = sdk_index
rc = sx_mgmt_phy_module_reset(sdk_handle, module_id_info)
if rc != SX_STATUS_SUCCESS:
logger.log_error("Error occurred when resetting SFP module {}, slot {}, error code {}".format(sdk_index, slot_id, rc))
return rc == SX_STATUS_SUCCESS
@classmethod
def is_nve(cls, port):
return (port & NVE_MASK) != 0
@classmethod
def is_cpu(cls, port):
return (port & CPU_MASK) != 0
@classmethod
def _fetch_port_status(cls, sdk_handle, log_port):
oper_state_p = new_sx_port_oper_state_t_p()
admin_state_p = new_sx_port_admin_state_t_p()
module_state_p = new_sx_port_module_state_t_p()
rc = sx_api_port_state_get(sdk_handle, log_port, oper_state_p, admin_state_p, module_state_p)
assert rc == SXD_STATUS_SUCCESS, "sx_api_port_state_get failed, rc = %d" % rc
admin_state = sx_port_admin_state_t_p_value(admin_state_p)
oper_state = sx_port_oper_state_t_p_value(oper_state_p)
delete_sx_port_oper_state_t_p(oper_state_p)
delete_sx_port_admin_state_t_p(admin_state_p)
delete_sx_port_module_state_t_p(module_state_p)
return oper_state, admin_state
@classmethod
def is_port_admin_status_up(cls, sdk_handle, log_port):
_, admin_state = cls._fetch_port_status(sdk_handle, log_port);
admin_state == SX_PORT_ADMIN_STATUS_UP
@classmethod
def set_port_admin_status_by_log_port(cls, sdk_handle, log_port, admin_status):
rc = sx_api_port_state_set(sdk_handle, log_port, admin_status)
if SX_STATUS_SUCCESS != rc:
logger.log_error("sx_api_port_state_set failed, rc = %d" % rc)
return SX_STATUS_SUCCESS == rc
@classmethod
def get_logical_ports(cls, sdk_handle, sdk_index, slot_id):
# Get all the ports related to the sfp, if port admin status is up, put it to list
port_attributes_list = new_sx_port_attributes_t_arr(SX_PORT_ATTR_ARR_SIZE)
port_cnt_p = new_uint32_t_p()
uint32_t_p_assign(port_cnt_p, SX_PORT_ATTR_ARR_SIZE)
rc = sx_api_port_device_get(sdk_handle, DEVICE_ID , SWITCH_ID, port_attributes_list, port_cnt_p)
assert rc == SX_STATUS_SUCCESS, "sx_api_port_device_get failed, rc = %d" % rc
port_cnt = uint32_t_p_value(port_cnt_p)
log_port_list = []
for i in range(0, port_cnt):
port_attributes = sx_port_attributes_t_arr_getitem(port_attributes_list, i)
if not cls.is_nve(int(port_attributes.log_port)) \
and not cls.is_cpu(int(port_attributes.log_port)) \
and port_attributes.port_mapping.module_port == sdk_index \
and port_attributes.port_mapping.slot == slot_id \
and cls.is_port_admin_status_up(sdk_handle, port_attributes.log_port):
log_port_list.append(port_attributes.log_port)
delete_sx_port_attributes_t_arr(port_attributes_list)
delete_uint32_t_p(port_cnt_p)
return log_port_list
@classmethod
def mgmt_phy_mod_pwr_attr_set(cls, sdk_handle, sdk_index, slot_id, power_attr_type, admin_pwr_mode):
result = False
sx_mgmt_phy_mod_pwr_attr = sx_mgmt_phy_mod_pwr_attr_t()
sx_mgmt_phy_mod_pwr_mode_attr = sx_mgmt_phy_mod_pwr_mode_attr_t()
sx_mgmt_phy_mod_pwr_attr.power_attr_type = power_attr_type
sx_mgmt_phy_mod_pwr_mode_attr.admin_pwr_mode_e = admin_pwr_mode
sx_mgmt_phy_mod_pwr_attr.pwr_mode_attr = sx_mgmt_phy_mod_pwr_mode_attr
sx_mgmt_phy_mod_pwr_attr_p = new_sx_mgmt_phy_mod_pwr_attr_t_p()
sx_mgmt_phy_mod_pwr_attr_t_p_assign(sx_mgmt_phy_mod_pwr_attr_p, sx_mgmt_phy_mod_pwr_attr)
module_id_info = sx_mgmt_module_id_info_t()
module_id_info.slot_id = slot_id
module_id_info.module_id = sdk_index
try:
rc = sx_mgmt_phy_module_pwr_attr_set(sdk_handle, SX_ACCESS_CMD_SET, module_id_info, sx_mgmt_phy_mod_pwr_attr_p)
if SX_STATUS_SUCCESS != rc:
logger.log_error("Error occurred when setting power mode for SFP module {}, slot {}, error code {}".format(sdk_index, slot_id, rc))
result = False
else:
result = True
finally:
delete_sx_mgmt_phy_mod_pwr_attr_t_p(sx_mgmt_phy_mod_pwr_attr_p)
return result
@classmethod
def _set_lpmode_raw(cls, sdk_handle, sdk_index, slot_id, ports, attr_type, power_mode):
result = False
# Check if the module already works in the same mode
admin_pwr_mode, oper_pwr_mode = cls.mgmt_phy_mod_pwr_attr_get(attr_type, sdk_handle, sdk_index, slot_id)
if (power_mode == SX_MGMT_PHY_MOD_PWR_MODE_LOW_E and oper_pwr_mode == SX_MGMT_PHY_MOD_PWR_MODE_LOW_E) \
or (power_mode == SX_MGMT_PHY_MOD_PWR_MODE_AUTO_E and admin_pwr_mode == SX_MGMT_PHY_MOD_PWR_MODE_AUTO_E):
return True
try:
# Bring the port down
for port in ports:
cls.set_port_admin_status_by_log_port(sdk_handle, port, SX_PORT_ADMIN_STATUS_DOWN)
# Set the desired power mode
result = cls.mgmt_phy_mod_pwr_attr_set(sdk_handle, sdk_index, slot_id, attr_type, power_mode)
finally:
# Bring the port up
for port in ports:
cls.set_port_admin_status_by_log_port(sdk_handle, port, SX_PORT_ADMIN_STATUS_UP)
return result
def set_lpmode(self, lpmode):
"""
Sets the lpmode (low power mode) of SFP
Args:
lpmode: A Boolean, True to enable lpmode, False to disable it
Note : lpmode can be overridden by set_power_override
Returns:
A boolean, True if lpmode is set successfully, False if not
"""
if utils.is_host():
# To avoid performance issue,
# call class level method to avoid initialize the whole sonic platform API
set_lpmode_code = 'from sonic_platform import sfp;\n' \
'with sfp.SdkHandleContext() as sdk_handle:' \
'print(sfp.SFP._set_lpmode({}, sdk_handle, {}, {}))' \
.format('True' if lpmode else 'False', self.sdk_index, self.slot_id)
lpm_cmd = "docker exec pmon python3 -c \"{}\"".format(set_lpmode_code)
# Set LPM
try:
output = subprocess.check_output(lpm_cmd, shell=True, universal_newlines=True)
return 'True' in output
except subprocess.CalledProcessError as e:
print("Error! Unable to set LPM for {}, rc = {}, err msg: {}".format(self.sdk_index, e.returncode, e.output))
return False
else:
return self._set_lpmode(lpmode, self.sdk_handle, self.sdk_index, self.slot_id)
@classmethod
def _set_lpmode(cls, lpmode, sdk_handle, sdk_index, slot_id):
log_port_list = cls.get_logical_ports(sdk_handle, sdk_index, slot_id)
sdk_lpmode = SX_MGMT_PHY_MOD_PWR_MODE_LOW_E if lpmode else SX_MGMT_PHY_MOD_PWR_MODE_AUTO_E
cls._set_lpmode_raw(sdk_handle,
sdk_index,
slot_id,
log_port_list,
SX_MGMT_PHY_MOD_PWR_ATTR_PWR_MODE_E,
sdk_lpmode)
logger.log_info("{} low power mode for module {}, slot {}".format("Enabled" if lpmode else "Disabled", sdk_index, slot_id))
return True
def is_replaceable(self):
"""
Indicate whether this device is replaceable.
Returns:
bool: True if it is replaceable.
"""
return True
@classmethod
def _get_error_description_dict(cls):
return {0: cls.SFP_ERROR_DESCRIPTION_POWER_BUDGET_EXCEEDED,
1: cls.SFP_MLNX_ERROR_DESCRIPTION_LONGRANGE_NON_MLNX_CABLE,
2: cls.SFP_ERROR_DESCRIPTION_I2C_STUCK,
3: cls.SFP_ERROR_DESCRIPTION_BAD_EEPROM,
4: cls.SFP_MLNX_ERROR_DESCRIPTION_ENFORCE_PART_NUMBER_LIST,
5: cls.SFP_ERROR_DESCRIPTION_UNSUPPORTED_CABLE,
6: cls.SFP_ERROR_DESCRIPTION_HIGH_TEMP,
7: cls.SFP_ERROR_DESCRIPTION_BAD_CABLE,
8: cls.SFP_MLNX_ERROR_DESCRIPTION_PMD_TYPE_NOT_ENABLED,
12: cls.SFP_MLNX_ERROR_DESCRIPTION_PCIE_POWER_SLOT_EXCEEDED,
255: cls.SFP_MLNX_ERROR_DESCRIPTION_RESERVED
}
def get_error_description(self):
"""
Get error description
Args:
error_code: The error code returned by _get_module_info
Returns:
The error description
"""
oper_status, error_code = self._get_module_info(self.sdk_handle, self.sdk_index)
if oper_status == SX_PORT_MODULE_STATUS_INITIALIZING:
error_description = self.SFP_STATUS_INITIALIZING
elif oper_status == SX_PORT_MODULE_STATUS_PLUGGED:
error_description = self.SFP_STATUS_OK
elif oper_status == SX_PORT_MODULE_STATUS_UNPLUGGED:
error_description = self.SFP_STATUS_UNPLUGGED
elif oper_status == SX_PORT_MODULE_STATUS_PLUGGED_DISABLED:
error_description = self.SFP_STATUS_DISABLED
elif oper_status == SX_PORT_MODULE_STATUS_PLUGGED_WITH_ERROR:
error_description_dict = self._get_error_description_dict()
if error_code in error_description_dict:
error_description = error_description_dict[error_code]
else:
error_description = "Unknown error ({})".format(error_code)
else:
error_description = "Unknow SFP module status ({})".format(oper_status)
return error_description
class RJ45Port(NvidiaSFPCommon):
"""class derived from SFP, representing RJ45 ports"""
def __init__(self, sfp_index):
super(RJ45Port, self).__init__(sfp_index)
self.sfp_type = RJ45_TYPE
@classmethod
def _get_presence(cls, sdk_handle, sdk_index):
"""Class level method to get low power mode.
Args:
sdk_handle: SDK handle
sdk_index (integer): SDK port index
slot_id (integer): Slot ID
Returns:
[boolean]: True if low power mode is on else off
"""
oper_status, _ = cls._get_module_info(sdk_handle, sdk_index)
return print(oper_status == SX_PORT_MODULE_STATUS_PLUGGED)
def get_presence(self):
"""
Retrieves the presence of the device
For RJ45 ports, it always return True
Returns:
bool: True if device is present, False if not
"""
if utils.is_host():
# To avoid performance issue,
# call class level method to avoid initialize the whole sonic platform API
get_presence_code = 'from sonic_platform import sfp;\n' \
'with sfp.SdkHandleContext() as sdk_handle:' \
'print(sfp.RJ45Port._get_presence(sdk_handle, {}))'.format(self.sdk_index)
presence_cmd = "docker exec pmon python3 -c \"{}\"".format(get_presence_code)
try:
output = subprocess.check_output(presence_cmd, shell=True, universal_newlines=True)
return 'True' in output
except subprocess.CalledProcessError as e:
print("Error! Unable to get presence for {}, rc = {}, err msg: {}".format(self.sdk_index, e.returncode, e.output))
return False
else:
oper_status, _ = self._get_module_info(self.sdk_handle, self.sdk_index);
return (oper_status == SX_PORT_MODULE_STATUS_PLUGGED)
def get_transceiver_info(self):
"""
Retrieves transceiver info of this port.
For RJ45, all fields are N/A
Returns:
A dict which contains following keys/values :
================================================================================
keys |Value Format |Information
---------------------------|---------------|----------------------------
type |1*255VCHAR |type of SFP
vendor_rev |1*255VCHAR |vendor revision of SFP
serial |1*255VCHAR |serial number of the SFP
manufacturer |1*255VCHAR |SFP vendor name
model |1*255VCHAR |SFP model name
connector |1*255VCHAR |connector information
encoding |1*255VCHAR |encoding information
ext_identifier |1*255VCHAR |extend identifier
ext_rateselect_compliance |1*255VCHAR |extended rateSelect compliance
cable_length |INT |cable length in m
mominal_bit_rate |INT |nominal bit rate by 100Mbs
specification_compliance |1*255VCHAR |specification compliance
vendor_date |1*255VCHAR |vendor date
vendor_oui |1*255VCHAR |vendor OUI
application_advertisement |1*255VCHAR |supported applications advertisement
================================================================================
"""
transceiver_info_keys = ['manufacturer',
'model',
'vendor_rev',
'serial',
'vendor_oui',
'vendor_date',
'connector',
'encoding',
'ext_identifier',
'ext_rateselect_compliance',
'cable_type',
'cable_length',
'specification_compliance',
'nominal_bit_rate',
'application_advertisement']
transceiver_info_dict = dict.fromkeys(transceiver_info_keys, 'N/A')
transceiver_info_dict['type'] = self.sfp_type
return transceiver_info_dict
def get_lpmode(self):
"""
Retrieves the lpmode (low power mode) status of this SFP
Returns:
A Boolean, True if lpmode is enabled, False if disabled
"""
return False
def reset(self):
"""
Reset SFP and return all user module settings to their default state.
Returns:
A boolean, True if successful, False if not
refer plugins/sfpreset.py
"""
return False
def set_lpmode(self, lpmode):
"""
Sets the lpmode (low power mode) of SFP
Args:
lpmode: A Boolean, True to enable lpmode, False to disable it
Note : lpmode can be overridden by set_power_override
Returns:
A boolean, True if lpmode is set successfully, False if not
"""
return False
def get_error_description(self):
"""
Get error description
Args:
error_code: Always false on SN2201
Returns:
The error description
"""
return False
def get_transceiver_bulk_status(self):
"""
Retrieves transceiver bulk status of this SFP
Returns:
A dict which contains following keys/values :
========================================================================
keys |Value Format |Information
---------------------------|---------------|----------------------------
RX LOS |BOOLEAN |RX lost-of-signal status,
| |True if has RX los, False if not.
TX FAULT |BOOLEAN |TX fault status,
| |True if has TX fault, False if not.
Reset status |BOOLEAN |reset status,
| |True if SFP in reset, False if not.
LP mode |BOOLEAN |low power mode status,
| |True in lp mode, False if not.
TX disable |BOOLEAN |TX disable status,
| |True TX disabled, False if not.
TX disabled channel |HEX |disabled TX channles in hex,
| |bits 0 to 3 represent channel 0
| |to channel 3.
Temperature |INT |module temperature in Celsius
Voltage |INT |supply voltage in mV
TX bias |INT |TX Bias Current in mA
RX power |INT |received optical power in mW
TX power |INT |TX output power in mW
========================================================================
"""
transceiver_dom_info_dict = {}
dom_info_dict_keys = ['temperature', 'voltage',
'rx1power', 'rx2power',
'rx3power', 'rx4power',
'rx5power', 'rx6power',
'rx7power', 'rx8power',
'tx1bias', 'tx2bias',
'tx3bias', 'tx4bias',
'tx5bias', 'tx6bias',
'tx7bias', 'tx8bias',
'tx1power', 'tx2power',
'tx3power', 'tx4power',
'tx5power', 'tx6power',
'tx7power', 'tx8power'
]
transceiver_dom_info_dict = dict.fromkeys(dom_info_dict_keys, 'N/A')
return transceiver_dom_info_dict
def get_transceiver_threshold_info(self):
"""
Retrieves transceiver threshold info of this SFP
Returns:
A dict which contains following keys/values :
========================================================================
keys |Value Format |Information
---------------------------|---------------|----------------------------
temphighalarm |FLOAT |High Alarm Threshold value of temperature in Celsius.
templowalarm |FLOAT |Low Alarm Threshold value of temperature in Celsius.
temphighwarning |FLOAT |High Warning Threshold value of temperature in Celsius.
templowwarning |FLOAT |Low Warning Threshold value of temperature in Celsius.
vcchighalarm |FLOAT |High Alarm Threshold value of supply voltage in mV.
vcclowalarm |FLOAT |Low Alarm Threshold value of supply voltage in mV.
vcchighwarning |FLOAT |High Warning Threshold value of supply voltage in mV.
vcclowwarning |FLOAT |Low Warning Threshold value of supply voltage in mV.
rxpowerhighalarm |FLOAT |High Alarm Threshold value of received power in dBm.
rxpowerlowalarm |FLOAT |Low Alarm Threshold value of received power in dBm.
rxpowerhighwarning |FLOAT |High Warning Threshold value of received power in dBm.
rxpowerlowwarning |FLOAT |Low Warning Threshold value of received power in dBm.
txpowerhighalarm |FLOAT |High Alarm Threshold value of transmit power in dBm.
txpowerlowalarm |FLOAT |Low Alarm Threshold value of transmit power in dBm.
txpowerhighwarning |FLOAT |High Warning Threshold value of transmit power in dBm.
txpowerlowwarning |FLOAT |Low Warning Threshold value of transmit power in dBm.
txbiashighalarm |FLOAT |High Alarm Threshold value of tx Bias Current in mA.
txbiaslowalarm |FLOAT |Low Alarm Threshold value of tx Bias Current in mA.
txbiashighwarning |FLOAT |High Warning Threshold value of tx Bias Current in mA.
txbiaslowwarning |FLOAT |Low Warning Threshold value of tx Bias Current in mA.
========================================================================
"""
transceiver_dom_threshold_info_dict = {}
dom_info_dict_keys = ['temphighalarm', 'temphighwarning',
'templowalarm', 'templowwarning',
'vcchighalarm', 'vcchighwarning',
'vcclowalarm', 'vcclowwarning',
'rxpowerhighalarm', 'rxpowerhighwarning',
'rxpowerlowalarm', 'rxpowerlowwarning',
'txpowerhighalarm', 'txpowerhighwarning',
'txpowerlowalarm', 'txpowerlowwarning',
'txbiashighalarm', 'txbiashighwarning',
'txbiaslowalarm', 'txbiaslowwarning'
]
transceiver_dom_threshold_info_dict = dict.fromkeys(dom_info_dict_keys, 'N/A')
return transceiver_dom_threshold_info_dict
def get_reset_status(self):
"""
Retrieves the reset status of SFP
Returns:
A Boolean, True if reset enabled, False if disabled
for QSFP, originally I would like to make use of Initialization complete flag bit
which is at Page a0 offset 6 bit 0 to test whether reset is complete.
However as unit testing was carried out I find this approach may fail because:
1. we make use of ethtool to read data on I2C bus rather than to read directly
2. ethtool is unable to access I2C during QSFP module being reset
In other words, whenever the flag is able to be retrived, the value is always be 1
As a result, it doesn't make sense to retrieve that flag. Just treat successfully
retrieving data as "data ready".
for SFP it seems that there is not flag indicating whether reset succeed. However,
we can also do it in the way for QSFP.
"""
return False
def read_eeprom(self, offset, num_bytes):
return None
def reinit(self):
"""
Nothing to do for RJ45. Just provide it to avoid exception
:return:
"""
return
Reference in New Issue View Git Blame Copy Permalink