matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
89020f53e4
sonic-buildimage/platform/broadcom/sonic-platform-modules-inventec/d7032q28b/modules/transceiver.c

899 lines
28 KiB
C
Raw Blame History

#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/kobject.h>
#include <linux/delay.h>
#include "io_expander.h"
#include "transceiver.h"
/* ========== Register EEPROM address mapping ==========
*/
struct eeprom_map_s eeprom_map_qsfp = {
.addr_rx_los =0x50, .page_rx_los =-1, .offset_rx_los =3, .length_rx_los =1,
.addr_tx_disable =0x50, .page_tx_disable =-1, .offset_tx_disable =86, .length_tx_disable =1,
.addr_tx_fault =0x50, .page_tx_fault =-1, .offset_tx_fault =4, .length_tx_fault =1,
};
struct eeprom_map_s eeprom_map_qsfp28 = {
.addr_rx_los =0x50, .page_rx_los =-1, .offset_rx_los =3, .length_rx_los =1,
.addr_tx_disable =0x50, .page_tx_disable =-1, .offset_tx_disable =86, .length_tx_disable =1,
.addr_tx_fault =0x50, .page_tx_fault =-1, .offset_tx_fault =4, .length_tx_fault =1,
};
/* ========== Utility Functions ==========
*/
void
alarm_msg_2_user(struct transvr_obj_s *self,
char *emsg) {
SWPS_ERR("%s on %s.\n", emsg, self->swp_name);
}
/* ========== Private functions ==========
*/
static int
_reload_transvr_obj(struct transvr_obj_s *self,int new_type);
static int
reload_transvr_obj(struct transvr_obj_s *self,int new_type);
static int
_transvr_init_handler(struct transvr_obj_s *self);
static void
_transvr_clean_retry(struct transvr_obj_s *self) {
self->retry = 0;
}
static int
_transvr_handle_retry(struct transvr_obj_s *self, int retry) {
/* Return: 0: keep retry
* -1: stop retry
*/
if (self->retry == 0) {
self->retry = retry;
}
self->retry -= 1;
if (self->retry <= 0) {
_transvr_clean_retry(self);
return -1;
}
return 0;
}
static int
_common_setup_page(struct transvr_obj_s *self,
int addr,
int page,
int offset,
int len,
int show_e) {
/* return:
* 0 : OK
* -1 : EEPROM settings incorrect
* -2 : I2C R/W failure
* -3 : Undefined case
*/
int retval = DEBUG_TRANSVR_INT_VAL;
char *emsg = DEBUG_TRANSVR_STR_VAL;
/* Check */
if ((addr < 0) || (offset < 0) || (len < 0)) {
emsg = "EEPROM settings incorrect";
retval = -1;
goto err_common_setup_page;
}
/* Case1: continue access */
if ((self->i2c_client_p->addr == addr) &&
(self->curr_page == page)) {
return 0;
}
self->i2c_client_p->addr = addr;
/* Case2: select lower page */
if (page == -1) {
self->curr_page = page;
return 0;
}
/* Case3: select upper page */
if (page >= 0) {
goto upper_common_setup_page;
}
/* Unexpected case */
show_e = 1;
emsg = "Unexpected case";
retval = -3;
goto err_common_setup_page;
upper_common_setup_page:
if (i2c_smbus_write_byte_data(self->i2c_client_p,
VAL_TRANSVR_PAGE_SELECT_OFFSET,
page) < 0) {
emsg = "I2C R/W failure";
retval = -2;
goto err_common_setup_page;
}
self->curr_page = page;
mdelay(VAL_TRANSVR_PAGE_SELECT_DELAY);
return 0;
err_common_setup_page:
if (show_e) {
SWPS_INFO("%s: %s", __func__, emsg);
SWPS_INFO("%s: <addr>:0x%02x <page>:%d <offs>:%d <len>:%d\n",
__func__, addr, page, offset, len);
}
return retval;
}
/* ========== Object functions for Final State Machine ==========
*/
int
is_plugged(struct transvr_obj_s *self){
int limit = 63;
int present = DEBUG_TRANSVR_INT_VAL;
char emsg[64] = DEBUG_TRANSVR_STR_VAL;
struct ioexp_obj_s *ioexp_p = self->ioexp_obj_p;
if (!ioexp_p) {
snprintf(emsg, limit, "ioexp_p is null!");
goto err_is_plugged_1;
}
present = ioexp_p->get_present(ioexp_p, self->ioexp_virt_offset);
switch (present){
case 0:
return 1;
case 1:
return 0;
case ERR_IOEXP_UNINIT:
snprintf(emsg, limit, "ioexp_p not ready!");
goto err_is_plugged_1;
default:
if (ioexp_p->state == STATE_IOEXP_INIT){
snprintf(emsg, limit, "ioexp_p not ready!");
goto err_is_plugged_1;
}
break;
}
SWPS_INFO("%s: Exception case! <pres>:%d <istate>:%d\n",
__func__, present, ioexp_p->state);
return 0;
err_is_plugged_1:
SWPS_DEBUG("%s: %s\n", __func__, emsg);
return 0;
}
static int
detect_transvr_type(struct transvr_obj_s* self){
int type = TRANSVR_TYPE_ERROR;
self->i2c_client_p->addr = VAL_TRANSVR_COMID_ARREESS;
type = i2c_smbus_read_byte_data(self->i2c_client_p,
VAL_TRANSVR_COMID_OFFSET);
/* Case: 1. Wait transceiver I2C module.
* 2. Transceiver I2C module failure.
* Note: 1. SFF allow maximum transceiver initial time is 2 second. So, there
* are exist some case that we need to wait transceiver.
* For these case, we keeps status on "TRANSVR_TYPE_UNPLUGGED", than
* state machine will keep trace with it.
* 2. There exist some I2C failure case we need to handle. Such as user
* insert the failure transceiver, or any reason cause it abnormal.
*/
if (type < 0){
switch (type) {
case -EIO:
SWPS_DEBUG("%s: %s smbus return:-5 (I/O error)\n",
__func__, self->swp_name);
return TRANSVR_TYPE_UNPLUGGED;
case -ENXIO:
SWPS_DEBUG("%s: %s smbus return:-6 (No such device or address)\n",
__func__, self->swp_name);
return TRANSVR_TYPE_UNPLUGGED;
default:
break;
}
SWPS_INFO("%s: %s unexpected smbus return:%d \n",
__func__, self->swp_name, type);
return TRANSVR_TYPE_ERROR;
}
/* Identify valid transceiver type */
switch (type){
case TRANSVR_TYPE_SFP:
case TRANSVR_TYPE_QSFP:
case TRANSVR_TYPE_QSFP_PLUS:
case TRANSVR_TYPE_QSFP_28:
break;
case TRANSVR_TYPE_UNKNOW_1:
case TRANSVR_TYPE_UNKNOW_2:
type = TRANSVR_TYPE_UNKNOW_2;
break;
default:
SWPS_DEBUG("%s: unknow type:0x%02x \n", __func__, type);
type = TRANSVR_TYPE_ERROR;
break;
}
return type;
}
static int
detect_transvr_state(struct transvr_obj_s *self,
int result[2]){
/* [return] [result-0] [result-1]
* 0 STATE_TRANSVR_CONNECTED TRANSVR_TYPE_FAKE
* 0 STATE_TRANSVR_DISCONNECTED TRANSVR_TYPE_UNPLUGGED
* 0 STATE_TRANSVR_ISOLATED TRANSVR_TYPE_ERROR
* 0 STATE_TRANSVR_INIT <NEW_TYPE>/<OLD_TYPE>
* 0 STATE_TRANSVR_SWAPPED <NEW_TYPE>
* 0 STATE_TRANSVR_CONNECTED <OLD_TYPE>
* ERR_TRNASVR_BE_ISOLATED STATE_TRANSVR_ISOLATED TRANSVR_TYPE_ERROR <Isolated>
* ERR_TRANSVR_I2C_CRASH STATE_TRANSVR_UNEXCEPTED TRANSVR_TYPE_ERROR <New event>
* ERR_TRANSVR_UNEXCPT STATE_TRANSVR_UNEXCEPTED TRANSVR_TYPE_UNKNOW_1/2
*/
result[0] = STATE_TRANSVR_UNEXCEPTED; /* For return state */
result[1] = TRANSVR_TYPE_ERROR; /* For return type */
/* Case1: Fake type */
if (self->type == TRANSVR_TYPE_FAKE){
result[0] = STATE_TRANSVR_CONNECTED;
result[1] = TRANSVR_TYPE_FAKE;
return 0;
}
/* Case2: Transceiver unplugged */
if (!is_plugged(self)){
result[0] = STATE_TRANSVR_DISCONNECTED;
result[1] = TRANSVR_TYPE_UNPLUGGED;
return 0;
}
/* Case3: Transceiver be isolated */
if (self->state == STATE_TRANSVR_ISOLATED){
result[0] = STATE_TRANSVR_ISOLATED;
result[1] = TRANSVR_TYPE_ERROR;
return ERR_TRNASVR_BE_ISOLATED;
}
/* Case4: Transceiver plugged */
result[1] = detect_transvr_type(self);
/* Case4.1: I2C topology crash
* Note : There are some I2C issues cause by transceiver/cables.
* We need to check topology status when user insert it.
* But in this step, we can't not ensure this is the issues
* port. So, it return the ERR_TRANSVR_I2C_CRASH, then upper
* layer will diagnostic I2C topology.
*/
if (check_channel_tier_1() < 0) {
SWPS_INFO("%s: %s detect I2C crash <obj-state>:%d\n",
__func__, self->swp_name, self->state);
result[0] = STATE_TRANSVR_UNEXCEPTED;
result[1] = TRANSVR_TYPE_ERROR;
return ERR_TRANSVR_I2C_CRASH;
}
/* Case4.2: System initial not ready,
* Note : Sometime i2c channel or transceiver EEPROM will delay that will
* cause system in inconsistent state between EEPROM and IOEXP.
* In this case, SWP transceiver object keep state at LINK_DOWN
* to wait system ready.
* By the way, State Machine will handle these case.
*/
if (result[1] == TRANSVR_TYPE_UNPLUGGED){
result[0] = STATE_TRANSVR_DISCONNECTED;
return 0;
}
/* Case4.3: Error transceiver type */
if (result[1] == TRANSVR_TYPE_ERROR){
result[0] = STATE_TRANSVR_ISOLATED;
SWPS_INFO("%s: %s detect error type\n", __func__, self->swp_name);
alarm_msg_2_user(self, "detected transceiver/cables not meet SFF standard!");
return ERR_TRNASVR_BE_ISOLATED;
}
/* Case3.3: Unknow transceiver type */
if ((result[1] == TRANSVR_TYPE_UNKNOW_1) ||
(result[1] == TRANSVR_TYPE_UNKNOW_2) ){
result[0] = STATE_TRANSVR_UNEXCEPTED;
return ERR_TRANSVR_UNEXCPT;
}
/* Case3.4: During initial process */
if (self->state == STATE_TRANSVR_INIT){
result[0] = STATE_TRANSVR_INIT;
return 0;
}
/* Case3.5: Transceiver be swapped */
if (self->type != result[1]){
result[0] = STATE_TRANSVR_SWAPPED;
return 0;
}
/* Case3.6: Link up state */
result[0] = STATE_TRANSVR_CONNECTED;
return 0;
}
int
common_fsm_4_direct_mode(struct transvr_obj_s* self,
char *caller_name){
int err;
int detect_result[2];
int current_state = STATE_TRANSVR_UNEXCEPTED;
int current_type = TRANSVR_TYPE_ERROR;
if (self->state == STATE_TRANSVR_NEW) {
if (_transvr_init_handler(self) < 0){
return ERR_TRANSVR_INIT_FAIL;
}
}
err = detect_transvr_state(self, detect_result);
if (err < 0) {
return err;
}
/* In Direct mode, driver only detect transceiver when user call driver interface
* which on sysfs. So it only need consider the state of Transceiver.
*/
current_state = detect_result[0];
current_type = detect_result[1];
switch (current_state){
case STATE_TRANSVR_DISCONNECTED: /* Transceiver is not plugged */
self->state = current_state;
self->type = current_type;
return ERR_TRANSVR_UNPLUGGED;
case STATE_TRANSVR_INIT: /* Transceiver is plugged, system not ready */
return ERR_TRANSVR_UNINIT;
case STATE_TRANSVR_ISOLATED: /* Transceiver is plugged, but has some issues */
return ERR_TRNASVR_BE_ISOLATED;
case STATE_TRANSVR_CONNECTED: /* Transceiver is plugged, system is ready */
self->state = current_state;
self->type = current_type;
return 0;
case STATE_TRANSVR_SWAPPED: /* Transceiver is plugged, system detect user changed */
self->type = current_type;
if (reload_transvr_obj(self, current_type) < 0){
self->state = STATE_TRANSVR_UNEXCEPTED;
return ERR_TRANSVR_UNEXCPT;
}
self->state = current_state;
return 0;
case STATE_TRANSVR_UNEXCEPTED: /* Transceiver type or state is unexpected case */
self->state = STATE_TRANSVR_UNEXCEPTED;
self->type = TRANSVR_TYPE_ERROR;
return ERR_TRANSVR_UNEXCPT;
default:
SWPS_INFO("%s: state:%d not in define.\n", __func__, current_state);
break;
}
return ERR_TRANSVR_UNEXCPT;
}
int
fake_fsm_4_direct_mode(struct transvr_obj_s* self,
char *caller_name){
self->state = STATE_TRANSVR_CONNECTED;
self->type = TRANSVR_TYPE_FAKE;
return 0;
}
/* ========== Object Initial handler ==========
*/
static int
_is_transvr_valid(struct transvr_obj_s *self,
int type,
int state) {
/* [Return]
* 0 : OK, inserted
* EVENT_TRANSVR_INIT_DOWN : OK, removed
* EVENT_TRANSVR_INIT_FAIL : Outside error, type doesn't supported
* EVENT_TRANSVR_EXCEP_INIT : Internal error, state undefined
*/
switch (type) {
case TRANSVR_TYPE_SFP:
case TRANSVR_TYPE_QSFP:
case TRANSVR_TYPE_QSFP_PLUS:
case TRANSVR_TYPE_QSFP_28:
case TRANSVR_TYPE_UNPLUGGED:
case TRANSVR_TYPE_FAKE:
break;
default:
SWPS_INFO("detect undefined type:0x%02x on %s\n",
type, self->swp_name);
return EVENT_TRANSVR_INIT_FAIL;
}
switch (state) {
case STATE_TRANSVR_DISCONNECTED:
return EVENT_TRANSVR_INIT_DOWN;
case STATE_TRANSVR_INIT:
case STATE_TRANSVR_CONNECTED:
case STATE_TRANSVR_SWAPPED:
break;
default:
SWPS_INFO("detect undefined state:%d on %s\n",
state, self->swp_name);
return EVENT_TRANSVR_EXCEP_INIT;
}
return 0;
}
static int
_is_transvr_hw_ready(struct transvr_obj_s *self,
int type){
/* [Return]
* EVENT_TRANSVR_TASK_DONE : Ready
* EVENT_TRANSVR_TASK_WAIT : Not ready
* EVENT_TRANSVR_INIT_FAIL : Error
*/
int addr = DEBUG_TRANSVR_INT_VAL;
int page = DEBUG_TRANSVR_INT_VAL;
int offs = DEBUG_TRANSVR_INT_VAL;
int bit = DEBUG_TRANSVR_INT_VAL;
int ready = DEBUG_TRANSVR_INT_VAL;
int err = DEBUG_TRANSVR_INT_VAL;
char *emsg = DEBUG_TRANSVR_STR_VAL;
uint8_t ab_val = DEBUG_TRANSVR_HEX_VAL;
switch (type) {
case TRANSVR_TYPE_SFP:
addr = VAL_TRANSVR_8472_READY_ADDR;
page = VAL_TRANSVR_8472_READY_PAGE;
offs = VAL_TRANSVR_8472_READY_OFFSET;
bit = VAL_TRANSVR_8472_READY_BIT;
ready = VAL_TRANSVR_8472_READY_VALUE;
ab_val = VAL_TRANSVR_8472_READY_ABNORMAL;
break;
case TRANSVR_TYPE_QSFP:
case TRANSVR_TYPE_QSFP_PLUS:
case TRANSVR_TYPE_QSFP_28:
addr = VAL_TRANSVR_8436_READY_ADDR;
page = VAL_TRANSVR_8436_READY_PAGE;
offs = VAL_TRANSVR_8436_READY_OFFSET;
bit = VAL_TRANSVR_8436_READY_BIT;
ready = VAL_TRANSVR_8436_READY_VALUE;
ab_val = VAL_TRANSVR_8436_READY_ABNORMAL;
break;
case TRANSVR_TYPE_UNPLUGGED:
case TRANSVR_TYPE_FAKE:
return EVENT_TRANSVR_TASK_DONE;
default:
emsg = "unexpected case";
goto err_is_transvr_hw_ready;
}
/* Select target page */
err = _common_setup_page(self, addr, page, offs, 1, 0);
if (err < 0) {
emsg = "setup page fail";
goto err_is_transvr_hw_ready;
}
/* Check feature supported
* [Note]
* Some of transceiver/cables doesn't support "Status Indicators"
* (ex:DAC, RJ45 copper SFP ...etc). In these case, we bypass the
* step of checking Status Indicators, then state machine will take
* the following handle procedure.
*/
err = i2c_smbus_read_byte_data(self->i2c_client_p,
VAL_TRANSVR_COMID_OFFSET);
if (err < 0) {
emsg = "doesn't support Status Indicators";
goto bypass_is_transvr_hw_ready;
}
/* Filter abnormal case */
if (err == ab_val) {
emsg = "detect using unusual definition.";
goto bypass_is_transvr_hw_ready;
}
/* Get Status Indicators */
err = i2c_smbus_read_byte_data(self->i2c_client_p, offs);
if (err < 0) {
emsg = "detect current value fail";
goto err_is_transvr_hw_ready;
}
if ((err & (1<<bit)) == ready) {
return EVENT_TRANSVR_TASK_DONE;
}
return EVENT_TRANSVR_TASK_WAIT;
bypass_is_transvr_hw_ready:
SWPS_DEBUG("%s: %s <type>:%d\n", __func__, emsg, type);
return EVENT_TRANSVR_TASK_DONE;
err_is_transvr_hw_ready:
SWPS_DEBUG("%s: %s <type>:%d\n", __func__, emsg, type);
return EVENT_TRANSVR_INIT_FAIL;
}
static int
_transvr_init_handler(struct transvr_obj_s *self){
int detect[2];
int d_state = STATE_TRANSVR_UNEXCEPTED;
int d_type = TRANSVR_TYPE_ERROR;
int result = ERR_TRANSVR_UNINIT;
int retry = 6; /* (6+1) x 0.3 = 2.1s > spec:2.0s */
int elimit = 63;
char emsg[64] = DEBUG_TRANSVR_STR_VAL;
/* Clean and check callback */
self->state = STATE_TRANSVR_INIT;
if (self->init == NULL) {
snprintf(emsg, elimit, "init() is null");
goto initer_err_case_unexcept_0;
}
/* Detect transceiver information */
result = detect_transvr_state(self, detect);
if (result < 0) {
snprintf(emsg, elimit, "detect_transvr_state() fail");
switch (result) {
case ERR_TRANSVR_I2C_CRASH:
goto initer_err_case_i2c_ceash;
case ERR_TRNASVR_BE_ISOLATED:
goto initer_err_case_be_isolated;
case ERR_TRANSVR_UNEXCPT:
default:
break;
}
goto initer_err_case_retry_1;
}
d_state = detect[0];
d_type = detect[1];
/* Verify transceiver type and state */
switch (_is_transvr_valid(self, d_type, d_state)) {
case 0:
break;
case EVENT_TRANSVR_INIT_DOWN:
goto initer_ok_case_down;;
case EVENT_TRANSVR_INIT_FAIL:
snprintf(emsg, elimit, "transceiver type doesn't support");
goto initer_err_case_alarm_to_user;
case EVENT_TRANSVR_EXCEP_INIT:
default:
goto initer_err_case_unexcept_0;
}
/* Handle reload case */
if (self->type != d_type){
/* This is the protect mechanism. Normally, This case will not happen.
* When State machine detect swap event during initial, It will trigger
* reload function to ensure type correct. */
if (_reload_transvr_obj(self, d_type) < 0){
snprintf(emsg, elimit, "reload object fail");
goto initer_err_case_unexcept_0;
}
}
/* Check transceiver HW initial ready */
switch (_is_transvr_hw_ready(self, d_type)) {
case EVENT_TRANSVR_TASK_DONE:
break;
case EVENT_TRANSVR_TASK_WAIT:
goto initer_err_case_retry_1;
case EVENT_TRANSVR_INIT_FAIL:
default:
goto initer_err_case_unexcept_0;
}
/* Try to update all and check */
if (self->update_all(self, 1) < 0){
/* For some transceiver, EEPROME has lag issues during initial stage.
* In this case, we set status back to STATE_TRANSVR_NEW, than it will
* be checked in next polling cycle. */
goto initer_err_case_retry_1;
}
/* Execute init() call back */
result = self->init(self);
switch (result) {
case EVENT_TRANSVR_TASK_DONE:
break;
case EVENT_TRANSVR_TASK_WAIT:
goto initer_ok_case_wait;
default:
snprintf(emsg, elimit, "undefined init() return:%d\n", result);
goto initer_err_case_unexcept_0;
}
goto initer_ok_case_up;
initer_ok_case_wait:
return EVENT_TRANSVR_TASK_WAIT;
initer_ok_case_up:
self->state = STATE_TRANSVR_CONNECTED;
self->temp = 0;
return EVENT_TRANSVR_INIT_UP;
initer_ok_case_down:
self->temp = 0;
self->state = STATE_TRANSVR_DISCONNECTED;
return EVENT_TRANSVR_INIT_DOWN;
initer_err_case_i2c_ceash:
SWPS_DEBUG("%s: %s <port>:%s <case>:I2C crash\n",
__func__, emsg, self->swp_name);
self->state = STATE_TRANSVR_UNEXCEPTED;
return EVENT_TRANSVR_I2C_CRASH;
initer_err_case_be_isolated:
SWPS_DEBUG("%s: %s <port>:%s <case>:isolated\n",
__func__, emsg, self->swp_name);
self->state = STATE_TRANSVR_ISOLATED;
return EVENT_TRANSVR_EXCEP_ISOLATED;
initer_err_case_retry_1:
SWPS_DEBUG("%s: %s <port>:%s <case>:retry\n",
__func__, emsg, self->swp_name);
if (_transvr_handle_retry(self, retry) == 0) {
self->state = STATE_TRANSVR_NEW;
return EVENT_TRANSVR_INIT_REINIT;
}
goto initer_err_case_alarm_to_user;
initer_err_case_unexcept_0:
self->state = STATE_TRANSVR_UNEXCEPTED;
return EVENT_TRANSVR_INIT_FAIL;
initer_err_case_alarm_to_user:
SWPS_DEBUG("%s: %s <port>:%s <case>:alarm_to_user\n",
__func__, emsg, self->swp_name);
self->state = STATE_TRANSVR_UNEXCEPTED;
alarm_msg_2_user(self, "detected transceiver/cables not meet SFF standard");
return EVENT_TRANSVR_INIT_FAIL;
}
static int
setup_transvr_private_cb(struct transvr_obj_s *self,
int transvr_type){
switch (transvr_type){
case TRANSVR_TYPE_SFP:
self->fsm_4_direct = common_fsm_4_direct_mode;
return 0;
case TRANSVR_TYPE_QSFP:
case TRANSVR_TYPE_QSFP_PLUS:
self->fsm_4_direct = common_fsm_4_direct_mode;
return 0;
case TRANSVR_TYPE_QSFP_28:
self->fsm_4_direct = common_fsm_4_direct_mode;
return 0;
case TRANSVR_TYPE_FAKE:
self->fsm_4_direct = fake_fsm_4_direct_mode;
return 0;
default:
break;
}
SWPS_WARN("%s: Detect non-defined type:%d\n", __func__, transvr_type);
return ERR_TRANSVR_UNEXCPT;
}
static struct eeprom_map_s *
get_eeprom_map(int transvr_type){
switch (transvr_type){
case TRANSVR_TYPE_QSFP:
case TRANSVR_TYPE_QSFP_PLUS:
return &eeprom_map_qsfp;
case TRANSVR_TYPE_QSFP_28:
return &eeprom_map_qsfp28;
default:
break;
}
SWPS_WARN("%s: Detect non-defined type:%d\n", __func__, transvr_type);
return NULL;
}
static int
setup_transvr_ssize_attr(char *swp_name,
struct transvr_obj_s *self,
struct eeprom_map_s *map_p,
struct ioexp_obj_s *ioexp_obj_p,
int ioexp_virt_offset,
int transvr_type,
int chipset_type,
int chan_id,
int run_mode){
switch (run_mode){
case TRANSVR_MODE_DIRECT: /* Direct access device mode */
self->mode = run_mode;
break;
default:
SWPS_ERR("%s: non-defined run_mode:%d\n",
__func__, run_mode);
self->mode = DEBUG_TRANSVR_INT_VAL;
return -1;
}
self->eeprom_map_p = map_p;
self->ioexp_obj_p = ioexp_obj_p;
self->ioexp_virt_offset = ioexp_virt_offset;
self->chan_id = chan_id;
self->layout = transvr_type;
self->type = transvr_type;
self->chipset_type = chipset_type;
self->state = STATE_TRANSVR_NEW;
self->info = STATE_TRANSVR_NEW;
self->auto_tx_disable = VAL_TRANSVR_FUNCTION_DISABLE;
strncpy(self->swp_name, swp_name, 32);
mutex_init(&self->lock);
return 0;
}
static int
setup_i2c_client(struct transvr_obj_s *self){
struct i2c_adapter *adap = NULL;
struct i2c_client *client = NULL;
char err_msg[64] = DEBUG_TRANSVR_STR_VAL;
adap = i2c_get_adapter(self->chan_id);
if(!adap){
snprintf(err_msg, sizeof(err_msg),
"can not get adap:%d", self->chan_id);
goto err_setup_i2c_client;
}
client = kzalloc(sizeof(*client), GFP_KERNEL);
if (!client){
snprintf(err_msg, sizeof(err_msg),
"can not kzalloc client:%d", self->chan_id);
goto err_setup_i2c_client;
}
client->adapter = adap;
self->i2c_client_p = client;
self->i2c_client_p->addr = VAL_TRANSVR_COMID_ARREESS;
return 0;
err_setup_i2c_client:
SWPS_ERR("%s: %s\n", __func__, err_msg);
return ERR_TRANSVR_UNEXCPT;
}
struct transvr_obj_s *
create_transvr_obj(char *swp_name,
int chan_id,
struct ioexp_obj_s *ioexp_obj_p,
int ioexp_virt_offset,
int transvr_type,
int chipset_type,
int run_mode){
struct transvr_obj_s *result_p;
struct eeprom_map_s *map_p;
char err_msg[64] = DEBUG_TRANSVR_STR_VAL;
/* Allocate transceiver object */
map_p = get_eeprom_map(transvr_type);
if (!map_p){
snprintf(err_msg, sizeof(err_msg),
"Invalid transvr_type:%d", transvr_type);
goto err_create_transvr_fail;
}
result_p = kzalloc(sizeof(*result_p), GFP_KERNEL);
if (!result_p){
snprintf(err_msg, sizeof(err_msg), "kzalloc fail");
goto err_create_transvr_fail;
}
/* Prepare static size attributes */
if (setup_transvr_ssize_attr(swp_name,
result_p,
map_p,
ioexp_obj_p,
ioexp_virt_offset,
transvr_type,
chipset_type,
chan_id,
run_mode) < 0){
goto err_create_transvr_sattr_fail;
}
/* Prepare call back functions of object */
if (setup_transvr_private_cb(result_p, transvr_type) < 0){
goto err_create_transvr_sattr_fail;
}
/* Prepare i2c client object */
if (setup_i2c_client(result_p) < 0){
goto err_create_transvr_sattr_fail;
}
return result_p;
err_create_transvr_sattr_fail:
kfree(result_p);
err_create_transvr_fail:
SWPS_ERR("%s: %s <chan>:%d <voff>:%d <type>:%d\n",
__func__, err_msg, chan_id, ioexp_virt_offset, transvr_type);
return NULL;
}
static int
_reload_transvr_obj(struct transvr_obj_s *self,
int new_type){
struct eeprom_map_s *new_map_p;
struct eeprom_map_s *old_map_p = self->eeprom_map_p;
struct i2c_client *old_i2c_p = self->i2c_client_p;
int old_type = self->type;
/* Change state to STATE_TRANSVR_INIT */
self->state = STATE_TRANSVR_INIT;
self->type = new_type;
/* Replace EEPROME map */
new_map_p = get_eeprom_map(new_type);
if (!new_map_p){
goto err_private_reload_func_1;
}
self->eeprom_map_p = new_map_p;
/* Reload i2c client */
if (setup_i2c_client(self) < 0){
goto err_private_reload_func_2;
}
if (setup_transvr_private_cb(self, new_type) < 0){
goto err_private_reload_func_3;
}
kfree(old_i2c_p);
return 0;
err_private_reload_func_3:
SWPS_INFO("%s: init() fail!\n", __func__);
kfree(old_i2c_p);
self->state = STATE_TRANSVR_UNEXCEPTED;
self->type = TRANSVR_TYPE_ERROR;
return -2;
err_private_reload_func_2:
self->eeprom_map_p = old_map_p;
self->i2c_client_p = old_i2c_p;
err_private_reload_func_1:
self->state = STATE_TRANSVR_UNEXCEPTED;
self->type = old_type;
SWPS_INFO("%s fail! <type>:0x%02x\n", __func__, new_type);
return -1;
}
static int
reload_transvr_obj(struct transvr_obj_s *self,
int new_type){
int result_val = ERR_TRANSVR_UNEXCPT;
/* Reload phase */
result_val = _reload_transvr_obj(self, new_type);
if (result_val < 0){
SWPS_INFO("%s: reload phase fail! <err>:%d\n",
__func__, result_val);
return EVENT_TRANSVR_RELOAD_FAIL;
}
/* Initial phase */
result_val = _transvr_init_handler(self);
if (result_val < 0){
SWPS_INFO("%s: initial phase fail! <err>:%d\n",
__func__, result_val);
}
return result_val;
}
Reference in New Issue View Git Blame Copy Permalink