346b916c0e
- Why I did it This is to back-port Azure 7410 to 202012 branch. Enhance the Python3 support for platform API. Originally, some platform APIs call SDK API which didn't support Python 3. Now the Python 3 APIs have been supported in SDK 4.4.3XXX, Python3 is completely supported by platform API - How I did it Start all platform daemons from python3 1. Remove #/usr/bin/env python at the beginning of each platform API file as the platform API won't be started as daemons but be imported from other daemons. 2. Adjust SDK API calls accordingly Signed-off-by: Stephen Sun <stephens@nvidia.com>
2076 lines
102 KiB
Python
2076 lines
102 KiB
Python
#############################################################################
|
|
# Mellanox
|
|
#
|
|
# Module contains an implementation of SONiC Platform Base API and
|
|
# provides the FANs status which are available in the platform
|
|
#
|
|
#############################################################################
|
|
|
|
try:
|
|
import subprocess
|
|
import time
|
|
from sonic_platform_base.sfp_base import SfpBase
|
|
from sonic_platform_base.sonic_eeprom import eeprom_dts
|
|
from sonic_platform_base.sonic_sfp.sff8472 import sff8472InterfaceId
|
|
from sonic_platform_base.sonic_sfp.sff8472 import sff8472Dom
|
|
from sonic_platform_base.sonic_sfp.sff8436 import sff8436InterfaceId
|
|
from sonic_platform_base.sonic_sfp.sff8436 import sff8436Dom
|
|
from sonic_platform_base.sonic_sfp.inf8628 import inf8628InterfaceId
|
|
from sonic_platform_base.sonic_sfp.qsfp_dd import qsfp_dd_InterfaceId
|
|
from sonic_platform_base.sonic_sfp.qsfp_dd import qsfp_dd_Dom
|
|
from sonic_py_common.logger import Logger
|
|
|
|
except ImportError as e:
|
|
raise ImportError (str(e) + "- required module not found")
|
|
|
|
try:
|
|
# python_sdk_api does not support python3 for now. Daemons like thermalctld or psud
|
|
# also import this file without actually use the sdk lib. So we catch the ImportError
|
|
# and ignore it here. Meanwhile, we have to trigger xcvrd using python2 now because it
|
|
# uses the sdk lib.
|
|
from python_sdk_api.sxd_api import *
|
|
from python_sdk_api.sx_api import *
|
|
except ImportError as e:
|
|
pass
|
|
|
|
# definitions of the offset and width for values in XCVR info eeprom
|
|
XCVR_INTFACE_BULK_OFFSET = 0
|
|
XCVR_INTFACE_BULK_WIDTH_QSFP = 20
|
|
XCVR_INTFACE_BULK_WIDTH_SFP = 21
|
|
XCVR_TYPE_OFFSET = 0
|
|
XCVR_TYPE_WIDTH = 1
|
|
XCVR_EXT_TYPE_OFFSET = 1
|
|
XCVR_EXT_TYPE_WIDTH = 1
|
|
XCVR_CONNECTOR_OFFSET = 2
|
|
XCVR_CONNECTOR_WIDTH = 1
|
|
XCVR_COMPLIANCE_CODE_OFFSET = 3
|
|
XCVR_COMPLIANCE_CODE_WIDTH = 8
|
|
XCVR_ENCODING_OFFSET = 11
|
|
XCVR_ENCODING_WIDTH = 1
|
|
XCVR_NBR_OFFSET = 12
|
|
XCVR_NBR_WIDTH = 1
|
|
XCVR_EXT_RATE_SEL_OFFSET = 13
|
|
XCVR_EXT_RATE_SEL_WIDTH = 1
|
|
XCVR_CABLE_LENGTH_OFFSET = 14
|
|
XCVR_CABLE_LENGTH_WIDTH_QSFP = 5
|
|
XCVR_CABLE_LENGTH_WIDTH_SFP = 6
|
|
XCVR_VENDOR_NAME_OFFSET = 20
|
|
XCVR_VENDOR_NAME_WIDTH = 16
|
|
XCVR_VENDOR_OUI_OFFSET = 37
|
|
XCVR_VENDOR_OUI_WIDTH = 3
|
|
XCVR_VENDOR_PN_OFFSET = 40
|
|
XCVR_VENDOR_PN_WIDTH = 16
|
|
XCVR_HW_REV_OFFSET = 56
|
|
XCVR_HW_REV_WIDTH_OSFP = 2
|
|
XCVR_HW_REV_WIDTH_QSFP = 2
|
|
XCVR_HW_REV_WIDTH_SFP = 4
|
|
XCVR_EXT_SPECIFICATION_COMPLIANCE_OFFSET = 64
|
|
XCVR_EXT_SPECIFICATION_COMPLIANCE_WIDTH = 1
|
|
XCVR_VENDOR_SN_OFFSET = 68
|
|
XCVR_VENDOR_SN_WIDTH = 16
|
|
XCVR_VENDOR_DATE_OFFSET = 84
|
|
XCVR_VENDOR_DATE_WIDTH = 8
|
|
XCVR_DOM_CAPABILITY_OFFSET = 92
|
|
XCVR_DOM_CAPABILITY_WIDTH = 2
|
|
|
|
# definitions of the offset and width for values in XCVR_QSFP_DD info eeprom
|
|
XCVR_EXT_TYPE_OFFSET_QSFP_DD = 72
|
|
XCVR_EXT_TYPE_WIDTH_QSFP_DD = 2
|
|
XCVR_CONNECTOR_OFFSET_QSFP_DD = 75
|
|
XCVR_CONNECTOR_WIDTH_QSFP_DD = 1
|
|
XCVR_CABLE_LENGTH_OFFSET_QSFP_DD = 74
|
|
XCVR_CABLE_LENGTH_WIDTH_QSFP_DD = 1
|
|
XCVR_HW_REV_OFFSET_QSFP_DD = 36
|
|
XCVR_HW_REV_WIDTH_QSFP_DD = 2
|
|
XCVR_VENDOR_DATE_OFFSET_QSFP_DD = 54
|
|
XCVR_VENDOR_DATE_WIDTH_QSFP_DD = 8
|
|
XCVR_DOM_CAPABILITY_OFFSET_QSFP_DD = 2
|
|
XCVR_DOM_CAPABILITY_WIDTH_QSFP_DD = 1
|
|
XCVR_MEDIA_TYPE_OFFSET_QSFP_DD = 85
|
|
XCVR_MEDIA_TYPE_WIDTH_QSFP_DD = 1
|
|
XCVR_FIRST_APPLICATION_LIST_OFFSET_QSFP_DD = 86
|
|
XCVR_FIRST_APPLICATION_LIST_WIDTH_QSFP_DD = 32
|
|
XCVR_SECOND_APPLICATION_LIST_OFFSET_QSFP_DD = 351
|
|
XCVR_SECOND_APPLICATION_LIST_WIDTH_QSFP_DD = 28
|
|
|
|
# to improve performance we retrieve all eeprom data via a single ethtool command
|
|
# in function get_transceiver_info and get_transceiver_bulk_status
|
|
# XCVR_INTERFACE_DATA_SIZE stands for the max size to be read
|
|
# this variable is only used by get_transceiver_info.
|
|
# please be noted that each time some new value added to the function
|
|
# we should make sure that it falls into the area
|
|
# [XCVR_INTERFACE_DATA_START, XCVR_INTERFACE_DATA_SIZE] or
|
|
# adjust XCVR_INTERFACE_MAX_SIZE to contain the new data
|
|
# It's same for [QSFP_DOM_BULK_DATA_START, QSFP_DOM_BULK_DATA_SIZE] and
|
|
# [SFP_DOM_BULK_DATA_START, SFP_DOM_BULK_DATA_SIZE] which are used by
|
|
# get_transceiver_bulk_status
|
|
XCVR_INTERFACE_DATA_START = 0
|
|
XCVR_INTERFACE_DATA_SIZE = 92
|
|
SFP_MODULE_ADDRA2_OFFSET = 256
|
|
SFP_MODULE_THRESHOLD_OFFSET = 0
|
|
SFP_MODULE_THRESHOLD_WIDTH = 56
|
|
|
|
QSFP_DOM_BULK_DATA_START = 22
|
|
QSFP_DOM_BULK_DATA_SIZE = 36
|
|
SFP_DOM_BULK_DATA_START = 96
|
|
SFP_DOM_BULK_DATA_SIZE = 10
|
|
|
|
QSFP_DD_DOM_BULK_DATA_START = 14
|
|
QSFP_DD_DOM_BULK_DATA_SIZE = 4
|
|
|
|
# definitions of the offset for values in OSFP info eeprom
|
|
OSFP_TYPE_OFFSET = 0
|
|
OSFP_VENDOR_NAME_OFFSET = 129
|
|
OSFP_VENDOR_PN_OFFSET = 148
|
|
OSFP_HW_REV_OFFSET = 164
|
|
OSFP_VENDOR_SN_OFFSET = 166
|
|
|
|
# definitions of the offset for values in QSFP_DD info eeprom
|
|
QSFP_DD_TYPE_OFFSET = 0
|
|
QSFP_DD_VENDOR_NAME_OFFSET = 1
|
|
QSFP_DD_VENDOR_PN_OFFSET = 20
|
|
QSFP_DD_VENDOR_SN_OFFSET = 38
|
|
QSFP_DD_VENDOR_OUI_OFFSET = 17
|
|
|
|
#definitions of the offset and width for values in DOM info eeprom
|
|
QSFP_DOM_REV_OFFSET = 1
|
|
QSFP_DOM_REV_WIDTH = 1
|
|
QSFP_TEMPE_OFFSET = 22
|
|
QSFP_TEMPE_WIDTH = 2
|
|
QSFP_VOLT_OFFSET = 26
|
|
QSFP_VOLT_WIDTH = 2
|
|
QSFP_VERSION_COMPLIANCE_OFFSET = 1
|
|
QSFP_VERSION_COMPLIANCE_WIDTH = 2
|
|
QSFP_CHANNL_MON_OFFSET = 34
|
|
QSFP_CHANNL_MON_WIDTH = 16
|
|
QSFP_CHANNL_MON_WITH_TX_POWER_WIDTH = 24
|
|
QSFP_CHANNL_DISABLE_STATUS_OFFSET = 86
|
|
QSFP_CHANNL_DISABLE_STATUS_WIDTH = 1
|
|
QSFP_CHANNL_RX_LOS_STATUS_OFFSET = 3
|
|
QSFP_CHANNL_RX_LOS_STATUS_WIDTH = 1
|
|
QSFP_CHANNL_TX_FAULT_STATUS_OFFSET = 4
|
|
QSFP_CHANNL_TX_FAULT_STATUS_WIDTH = 1
|
|
QSFP_CONTROL_OFFSET = 86
|
|
QSFP_CONTROL_WIDTH = 8
|
|
QSFP_MODULE_MONITOR_OFFSET = 0
|
|
QSFP_MODULE_MONITOR_WIDTH = 9
|
|
QSFP_POWEROVERRIDE_OFFSET = 93
|
|
QSFP_POWEROVERRIDE_WIDTH = 1
|
|
QSFP_POWEROVERRIDE_BIT = 0
|
|
QSFP_POWERSET_BIT = 1
|
|
QSFP_OPTION_VALUE_OFFSET = 192
|
|
QSFP_OPTION_VALUE_WIDTH = 4
|
|
|
|
QSFP_MODULE_UPPER_PAGE3_START = 384
|
|
QSFP_MODULE_THRESHOLD_OFFSET = 128
|
|
QSFP_MODULE_THRESHOLD_WIDTH = 24
|
|
QSFP_CHANNL_THRESHOLD_OFFSET = 176
|
|
QSFP_CHANNL_THRESHOLD_WIDTH = 24
|
|
|
|
SFP_TEMPE_OFFSET = 96
|
|
SFP_TEMPE_WIDTH = 2
|
|
SFP_VOLT_OFFSET = 98
|
|
SFP_VOLT_WIDTH = 2
|
|
SFP_CHANNL_MON_OFFSET = 100
|
|
SFP_CHANNL_MON_WIDTH = 6
|
|
SFP_CHANNL_STATUS_OFFSET = 110
|
|
SFP_CHANNL_STATUS_WIDTH = 1
|
|
|
|
QSFP_DD_TEMPE_OFFSET = 14
|
|
QSFP_DD_TEMPE_WIDTH = 2
|
|
QSFP_DD_VOLT_OFFSET = 16
|
|
QSFP_DD_VOLT_WIDTH = 2
|
|
QSFP_DD_TX_BIAS_OFFSET = 42
|
|
QSFP_DD_TX_BIAS_WIDTH = 16
|
|
QSFP_DD_RX_POWER_OFFSET = 58
|
|
QSFP_DD_RX_POWER_WIDTH = 16
|
|
QSFP_DD_TX_POWER_OFFSET = 26
|
|
QSFP_DD_TX_POWER_WIDTH = 16
|
|
QSFP_DD_CHANNL_MON_OFFSET = 26
|
|
QSFP_DD_CHANNL_MON_WIDTH = 48
|
|
QSFP_DD_CHANNL_DISABLE_STATUS_OFFSET = 86
|
|
QSFP_DD_CHANNL_DISABLE_STATUS_WIDTH = 1
|
|
QSFP_DD_CHANNL_RX_LOS_STATUS_OFFSET = 19
|
|
QSFP_DD_CHANNL_RX_LOS_STATUS_WIDTH = 1
|
|
QSFP_DD_CHANNL_TX_FAULT_STATUS_OFFSET = 7
|
|
QSFP_DD_CHANNL_TX_FAULT_STATUS_WIDTH = 1
|
|
QSFP_DD_MODULE_THRESHOLD_OFFSET = 0
|
|
QSFP_DD_MODULE_THRESHOLD_WIDTH = 72
|
|
QSFP_DD_CHANNL_STATUS_OFFSET = 26
|
|
QSFP_DD_CHANNL_STATUS_WIDTH = 1
|
|
|
|
# identifier value of xSFP module which is in the first byte of the EEPROM
|
|
# if the identifier value falls into SFP_TYPE_CODE_LIST the module is treated as a SFP module and parsed according to 8472
|
|
# for QSFP_TYPE_CODE_LIST the module is treated as a QSFP module and parsed according to 8436/8636
|
|
# Originally the type (SFP/QSFP) of each module is determined according to the SKU dictionary
|
|
# where the type of each FP port is defined. The content of EEPROM is parsed according to its type.
|
|
# However, sometimes the SFP module can be fit in an adapter and then pluged into a QSFP port.
|
|
# In this case the EEPROM content is in format of SFP but parsed as QSFP, causing failure.
|
|
# To resolve that issue the type field of the xSFP module is also fetched so that we can know exectly what type the
|
|
# module is. Currently only the following types are recognized as SFP/QSFP module.
|
|
# Meanwhile, if the a module's identifier value can't be recognized, it will be parsed according to the SKU dictionary.
|
|
# This is because in the future it's possible that some new identifier value which is not regonized but backward compatible
|
|
# with the current format and by doing so it can be parsed as much as possible.
|
|
SFP_TYPE_CODE_LIST = [
|
|
'03' # SFP/SFP+/SFP28
|
|
]
|
|
QSFP_TYPE_CODE_LIST = [
|
|
'0d', # QSFP+ or later
|
|
'11' # QSFP28 or later
|
|
]
|
|
QSFP_DD_TYPE_CODE_LIST = [
|
|
'18' # QSFP-DD Double Density 8X Pluggable Transceiver
|
|
]
|
|
|
|
qsfp_cable_length_tup = ('Length(km)', 'Length OM3(2m)',
|
|
'Length OM2(m)', 'Length OM1(m)',
|
|
'Length Cable Assembly(m)')
|
|
|
|
sfp_cable_length_tup = ('LengthSMFkm-UnitsOfKm', 'LengthSMF(UnitsOf100m)',
|
|
'Length50um(UnitsOf10m)', 'Length62.5um(UnitsOfm)',
|
|
'LengthCable(UnitsOfm)', 'LengthOM3(UnitsOf10m)')
|
|
|
|
sfp_compliance_code_tup = ('10GEthernetComplianceCode', 'InfinibandComplianceCode',
|
|
'ESCONComplianceCodes', 'SONETComplianceCodes',
|
|
'EthernetComplianceCodes','FibreChannelLinkLength',
|
|
'FibreChannelTechnology', 'SFP+CableTechnology',
|
|
'FibreChannelTransmissionMedia','FibreChannelSpeed')
|
|
|
|
qsfp_compliance_code_tup = ('10/40G Ethernet Compliance Code', 'SONET Compliance codes',
|
|
'SAS/SATA compliance codes', 'Gigabit Ethernet Compliant codes',
|
|
'Fibre Channel link length/Transmitter Technology',
|
|
'Fibre Channel transmission media', 'Fibre Channel Speed')
|
|
|
|
SFP_PATH = "/var/run/hw-management/qsfp/"
|
|
SFP_TYPE = "SFP"
|
|
QSFP_TYPE = "QSFP"
|
|
OSFP_TYPE = "OSFP"
|
|
QSFP_DD_TYPE = "QSFP_DD"
|
|
|
|
#variables for sdk
|
|
REGISTER_NUM = 1
|
|
DEVICE_ID = 1
|
|
SWITCH_ID = 0
|
|
SX_PORT_ATTR_ARR_SIZE = 64
|
|
|
|
PMAOS_ASE = 1
|
|
PMAOS_EE = 1
|
|
PMAOS_E = 2
|
|
PMAOS_RST = 0
|
|
PMAOS_ENABLE = 1
|
|
PMAOS_DISABLE = 2
|
|
|
|
PMMP_LPMODE_BIT = 8
|
|
MCION_TX_DISABLE_BIT = 1
|
|
|
|
#on page 0
|
|
#i2c address 0x50
|
|
MCIA_ADDR_TX_CHANNEL_DISABLE = 86
|
|
|
|
MCIA_ADDR_POWER_OVERRIDE = 93
|
|
#power set bit
|
|
MCIA_ADDR_POWER_OVERRIDE_PS_BIT = 1
|
|
#power override bit
|
|
MCIA_ADDR_POWER_OVERRIDE_POR_BIT = 0
|
|
|
|
#on page 0
|
|
#i2c address 0x51
|
|
MCIA_ADDR_TX_DISABLE = 110
|
|
MCIA_ADDR_TX_DISABLE_BIT = 6
|
|
|
|
PORT_TYPE_NVE = 8
|
|
PORT_TYPE_CPU = 4
|
|
PORT_TYPE_OFFSET = 28
|
|
PORT_TYPE_MASK = 0xF0000000
|
|
NVE_MASK = PORT_TYPE_MASK & (PORT_TYPE_NVE << PORT_TYPE_OFFSET)
|
|
CPU_MASK = PORT_TYPE_MASK & (PORT_TYPE_CPU << PORT_TYPE_OFFSET)
|
|
|
|
# parameters for SFP presence
|
|
SFP_STATUS_INSERTED = '1'
|
|
|
|
# Global logger class instance
|
|
logger = Logger()
|
|
|
|
|
|
# SDK initializing stuff, called from chassis
|
|
def initialize_sdk_handle():
|
|
rc, sdk_handle = sx_api_open(None)
|
|
if (rc != SX_STATUS_SUCCESS):
|
|
logger.log_warning("Failed to open api handle, please check whether SDK is running.")
|
|
sdk_handle = None
|
|
|
|
return sdk_handle
|
|
|
|
def deinitialize_sdk_handle(sdk_handle):
|
|
if sdk_handle is not None:
|
|
rc = sx_api_close(sdk_handle)
|
|
if (rc != SX_STATUS_SUCCESS):
|
|
logger.log_warning("Failed to close api handle.")
|
|
|
|
return rc == SXD_STATUS_SUCCESS
|
|
else:
|
|
logger.log_warning("Sdk handle is none")
|
|
return False
|
|
|
|
class SFP(SfpBase):
|
|
"""Platform-specific SFP class"""
|
|
|
|
def __init__(self, sfp_index, sfp_type, sdk_handle_getter, platform):
|
|
SfpBase.__init__(self)
|
|
self.index = sfp_index + 1
|
|
self.sfp_eeprom_path = "qsfp{}".format(self.index)
|
|
self.sfp_status_path = "qsfp{}_status".format(self.index)
|
|
self._detect_sfp_type(sfp_type)
|
|
self.dom_tx_disable_supported = False
|
|
self._dom_capability_detect()
|
|
self.sdk_handle_getter = sdk_handle_getter
|
|
self.sdk_index = sfp_index
|
|
|
|
# initialize SFP thermal list
|
|
from .thermal import initialize_sfp_thermals
|
|
initialize_sfp_thermals(platform, self._thermal_list, self.index)
|
|
|
|
@property
|
|
def sdk_handle(self):
|
|
return self.sdk_handle_getter()
|
|
|
|
def reinit(self):
|
|
|
|
"""
|
|
Re-initialize this SFP object when a new SFP inserted
|
|
:return:
|
|
"""
|
|
self._detect_sfp_type(self.sfp_type)
|
|
self._dom_capability_detect()
|
|
|
|
def get_presence(self):
|
|
"""
|
|
Retrieves the presence of the device
|
|
|
|
Returns:
|
|
bool: True if device is present, False if not
|
|
"""
|
|
presence = False
|
|
ethtool_cmd = "ethtool -m sfp{} hex on offset 0 length 1 2>/dev/null".format(self.index)
|
|
try:
|
|
proc = subprocess.Popen(ethtool_cmd,
|
|
stdout=subprocess.PIPE,
|
|
shell=True,
|
|
stderr=subprocess.STDOUT,
|
|
universal_newlines=True)
|
|
stdout = proc.communicate()[0]
|
|
proc.wait()
|
|
result = stdout.rstrip('\n')
|
|
if result != '':
|
|
presence = True
|
|
|
|
except OSError as e:
|
|
raise OSError("Cannot detect sfp")
|
|
|
|
return presence
|
|
|
|
|
|
# Read out any bytes from any offset
|
|
def _read_eeprom_specific_bytes(self, offset, num_bytes):
|
|
eeprom_raw = []
|
|
ethtool_cmd = "ethtool -m sfp{} hex on offset {} length {}".format(self.index, offset, num_bytes)
|
|
try:
|
|
output = subprocess.check_output(ethtool_cmd,
|
|
shell=True,
|
|
universal_newlines=True)
|
|
output_lines = output.splitlines()
|
|
first_line_raw = output_lines[0]
|
|
if "Offset" in first_line_raw:
|
|
for line in output_lines[2:]:
|
|
line_split = line.split()
|
|
eeprom_raw = eeprom_raw + line_split[1:]
|
|
except subprocess.CalledProcessError as e:
|
|
return None
|
|
|
|
return eeprom_raw
|
|
|
|
|
|
def _detect_sfp_type(self, sfp_type):
|
|
eeprom_raw = []
|
|
eeprom_raw = self._read_eeprom_specific_bytes(XCVR_TYPE_OFFSET, XCVR_TYPE_WIDTH)
|
|
if eeprom_raw:
|
|
if eeprom_raw[0] in SFP_TYPE_CODE_LIST:
|
|
self.sfp_type = SFP_TYPE
|
|
elif eeprom_raw[0] in QSFP_TYPE_CODE_LIST:
|
|
self.sfp_type = QSFP_TYPE
|
|
elif eeprom_raw[0] in QSFP_DD_TYPE_CODE_LIST:
|
|
self.sfp_type = QSFP_DD_TYPE
|
|
else:
|
|
# we don't regonize this identifier value, treat the xSFP module as the default type
|
|
self.sfp_type = sfp_type
|
|
logger.log_info("Identifier value of {} module {} is {} which isn't regonized and will be treated as default type ({})".format(
|
|
sfp_type, self.index, eeprom_raw[0], sfp_type
|
|
))
|
|
else:
|
|
# eeprom_raw being None indicates the module is not present.
|
|
# in this case we treat it as the default type according to the SKU
|
|
self.sfp_type = sfp_type
|
|
|
|
|
|
def _dom_capability_detect(self):
|
|
if not self.get_presence():
|
|
self.dom_supported = False
|
|
self.dom_temp_supported = False
|
|
self.dom_volt_supported = False
|
|
self.dom_rx_power_supported = False
|
|
self.dom_tx_bias_power_supported = False
|
|
self.dom_tx_power_supported = False
|
|
self.calibration = 0
|
|
return
|
|
|
|
if self.sfp_type == QSFP_TYPE:
|
|
self.calibration = 1
|
|
sfpi_obj = sff8436InterfaceId()
|
|
if sfpi_obj is None:
|
|
self.dom_supported = False
|
|
offset = 128
|
|
|
|
# QSFP capability byte parse, through this byte can know whether it support tx_power or not.
|
|
# TODO: in the future when decided to migrate to support SFF-8636 instead of SFF-8436,
|
|
# need to add more code for determining the capability and version compliance
|
|
# in SFF-8636 dom capability definitions evolving with the versions.
|
|
qsfp_dom_capability_raw = self._read_eeprom_specific_bytes((offset + XCVR_DOM_CAPABILITY_OFFSET), XCVR_DOM_CAPABILITY_WIDTH)
|
|
if qsfp_dom_capability_raw is not None:
|
|
qsfp_version_compliance_raw = self._read_eeprom_specific_bytes(QSFP_VERSION_COMPLIANCE_OFFSET, QSFP_VERSION_COMPLIANCE_WIDTH)
|
|
qsfp_version_compliance = int(qsfp_version_compliance_raw[0], 16)
|
|
dom_capability = sfpi_obj.parse_dom_capability(qsfp_dom_capability_raw, 0)
|
|
if qsfp_version_compliance >= 0x08:
|
|
self.dom_temp_supported = dom_capability['data']['Temp_support']['value'] == 'On'
|
|
self.dom_volt_supported = dom_capability['data']['Voltage_support']['value'] == 'On'
|
|
self.dom_rx_power_supported = dom_capability['data']['Rx_power_support']['value'] == 'On'
|
|
self.dom_tx_power_supported = dom_capability['data']['Tx_power_support']['value'] == 'On'
|
|
else:
|
|
self.dom_temp_supported = True
|
|
self.dom_volt_supported = True
|
|
self.dom_rx_power_supported = dom_capability['data']['Rx_power_support']['value'] == 'On'
|
|
self.dom_tx_power_supported = True
|
|
self.dom_supported = True
|
|
self.calibration = 1
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
qsfp_option_value_raw = self._read_eeprom_specific_bytes(QSFP_OPTION_VALUE_OFFSET, QSFP_OPTION_VALUE_WIDTH)
|
|
if qsfp_option_value_raw is not None:
|
|
optional_capability = sfpd_obj.parse_option_params(qsfp_option_value_raw, 0)
|
|
self.dom_tx_disable_supported = optional_capability['data']['TxDisable']['value'] == 'On'
|
|
dom_status_indicator = sfpd_obj.parse_dom_status_indicator(qsfp_version_compliance_raw, 1)
|
|
self.qsfp_page3_available = dom_status_indicator['data']['FlatMem']['value'] == 'Off'
|
|
else:
|
|
self.dom_supported = False
|
|
self.dom_temp_supported = False
|
|
self.dom_volt_supported = False
|
|
self.dom_rx_power_supported = False
|
|
self.dom_tx_power_supported = False
|
|
self.calibration = 0
|
|
self.qsfp_page3_available = False
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
sfpi_obj = qsfp_dd_InterfaceId()
|
|
if sfpi_obj is None:
|
|
self.dom_supported = False
|
|
|
|
offset = 0
|
|
# two types of QSFP-DD cable types supported: Copper and Optical.
|
|
qsfp_dom_capability_raw = self._read_eeprom_specific_bytes((offset + XCVR_DOM_CAPABILITY_OFFSET_QSFP_DD), XCVR_DOM_CAPABILITY_WIDTH_QSFP_DD)
|
|
if qsfp_dom_capability_raw is not None:
|
|
self.dom_temp_supported = True
|
|
self.dom_volt_supported = True
|
|
dom_capability = sfpi_obj.parse_dom_capability(qsfp_dom_capability_raw, 0)
|
|
if dom_capability['data']['Flat_MEM']['value'] == 'Off':
|
|
self.dom_supported = True
|
|
self.second_application_list = True
|
|
self.dom_rx_power_supported = True
|
|
self.dom_tx_power_supported = True
|
|
self.dom_tx_bias_power_supported = True
|
|
self.dom_thresholds_supported = True
|
|
self.dom_rx_tx_power_bias_supported = True
|
|
else:
|
|
self.dom_supported = False
|
|
self.second_application_list = False
|
|
self.dom_rx_power_supported = False
|
|
self.dom_tx_power_supported = False
|
|
self.dom_tx_bias_power_supported = False
|
|
self.dom_thresholds_supported = False
|
|
self.dom_rx_tx_power_bias_supported = False
|
|
else:
|
|
self.dom_supported = False
|
|
self.dom_temp_supported = False
|
|
self.dom_volt_supported = False
|
|
self.dom_rx_power_supported = False
|
|
self.dom_tx_power_supported = False
|
|
self.dom_tx_bias_power_supported = False
|
|
self.dom_thresholds_supported = False
|
|
self.dom_rx_tx_power_bias_supported = False
|
|
|
|
elif self.sfp_type == SFP_TYPE:
|
|
sfpi_obj = sff8472InterfaceId()
|
|
if sfpi_obj is None:
|
|
return None
|
|
sfp_dom_capability_raw = self._read_eeprom_specific_bytes(XCVR_DOM_CAPABILITY_OFFSET, XCVR_DOM_CAPABILITY_WIDTH)
|
|
if sfp_dom_capability_raw is not None:
|
|
sfp_dom_capability = int(sfp_dom_capability_raw[0], 16)
|
|
self.dom_supported = (sfp_dom_capability & 0x40 != 0)
|
|
if self.dom_supported:
|
|
self.dom_temp_supported = True
|
|
self.dom_volt_supported = True
|
|
self.dom_rx_power_supported = True
|
|
self.dom_tx_power_supported = True
|
|
if sfp_dom_capability & 0x20 != 0:
|
|
self.calibration = 1
|
|
elif sfp_dom_capability & 0x10 != 0:
|
|
self.calibration = 2
|
|
else:
|
|
self.calibration = 0
|
|
else:
|
|
self.dom_temp_supported = False
|
|
self.dom_volt_supported = False
|
|
self.dom_rx_power_supported = False
|
|
self.dom_tx_power_supported = False
|
|
self.calibration = 0
|
|
self.dom_tx_disable_supported = (int(sfp_dom_capability_raw[1], 16) & 0x40 != 0)
|
|
else:
|
|
self.dom_supported = False
|
|
self.dom_temp_supported = False
|
|
self.dom_volt_supported = False
|
|
self.dom_rx_power_supported = False
|
|
self.dom_tx_power_supported = False
|
|
|
|
|
|
def _convert_string_to_num(self, value_str):
|
|
if "-inf" in value_str:
|
|
return 'N/A'
|
|
elif "Unknown" in value_str:
|
|
return 'N/A'
|
|
elif 'dBm' in value_str:
|
|
t_str = value_str.rstrip('dBm')
|
|
return float(t_str)
|
|
elif 'mA' in value_str:
|
|
t_str = value_str.rstrip('mA')
|
|
return float(t_str)
|
|
elif 'C' in value_str:
|
|
t_str = value_str.rstrip('C')
|
|
return float(t_str)
|
|
elif 'Volts' in value_str:
|
|
t_str = value_str.rstrip('Volts')
|
|
return float(t_str)
|
|
else:
|
|
return 'N/A'
|
|
|
|
|
|
def get_transceiver_info(self):
|
|
"""
|
|
Retrieves transceiver info of this SFP
|
|
|
|
Returns:
|
|
A dict which contains following keys/values :
|
|
================================================================================
|
|
keys |Value Format |Information
|
|
---------------------------|---------------|----------------------------
|
|
type |1*255VCHAR |type of SFP
|
|
hardware_rev |1*255VCHAR |hardware version of SFP
|
|
serial |1*255VCHAR |serial number of the SFP
|
|
manufacturer |1*255VCHAR |SFP vendor name
|
|
model |1*255VCHAR |SFP model name
|
|
connector |1*255VCHAR |connector information
|
|
encoding |1*255VCHAR |encoding information
|
|
ext_identifier |1*255VCHAR |extend identifier
|
|
ext_rateselect_compliance |1*255VCHAR |extended rateSelect compliance
|
|
cable_length |INT |cable length in m
|
|
mominal_bit_rate |INT |nominal bit rate by 100Mbs
|
|
specification_compliance |1*255VCHAR |specification compliance
|
|
vendor_date |1*255VCHAR |vendor date
|
|
vendor_oui |1*255VCHAR |vendor OUI
|
|
application_advertisement |1*255VCHAR |supported applications advertisement
|
|
================================================================================
|
|
"""
|
|
transceiver_info_dict = {}
|
|
compliance_code_dict = {}
|
|
|
|
# ToDo: OSFP tranceiver info parsing not fully supported.
|
|
# in inf8628.py lack of some memory map definition
|
|
# will be implemented when the inf8628 memory map ready
|
|
if self.sfp_type == OSFP_TYPE:
|
|
offset = 0
|
|
vendor_rev_width = XCVR_HW_REV_WIDTH_OSFP
|
|
|
|
sfpi_obj = inf8628InterfaceId()
|
|
if sfpi_obj is None:
|
|
return None
|
|
|
|
sfp_type_raw = self._read_eeprom_specific_bytes((offset + OSFP_TYPE_OFFSET), XCVR_TYPE_WIDTH)
|
|
if sfp_type_raw is not None:
|
|
sfp_type_data = sfpi_obj.parse_sfp_type(sfp_type_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_name_raw = self._read_eeprom_specific_bytes((offset + OSFP_VENDOR_NAME_OFFSET), XCVR_VENDOR_NAME_WIDTH)
|
|
if sfp_vendor_name_raw is not None:
|
|
sfp_vendor_name_data = sfpi_obj.parse_vendor_name(sfp_vendor_name_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_pn_raw = self._read_eeprom_specific_bytes((offset + OSFP_VENDOR_PN_OFFSET), XCVR_VENDOR_PN_WIDTH)
|
|
if sfp_vendor_pn_raw is not None:
|
|
sfp_vendor_pn_data = sfpi_obj.parse_vendor_pn(sfp_vendor_pn_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_rev_raw = self._read_eeprom_specific_bytes((offset + OSFP_HW_REV_OFFSET), vendor_rev_width)
|
|
if sfp_vendor_rev_raw is not None:
|
|
sfp_vendor_rev_data = sfpi_obj.parse_vendor_rev(sfp_vendor_rev_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_sn_raw = self._read_eeprom_specific_bytes((offset + OSFP_VENDOR_SN_OFFSET), XCVR_VENDOR_SN_WIDTH)
|
|
if sfp_vendor_sn_raw is not None:
|
|
sfp_vendor_sn_data = sfpi_obj.parse_vendor_sn(sfp_vendor_sn_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
transceiver_info_dict['type'] = sfp_type_data['data']['type']['value']
|
|
transceiver_info_dict['manufacturer'] = sfp_vendor_name_data['data']['Vendor Name']['value']
|
|
transceiver_info_dict['model'] = sfp_vendor_pn_data['data']['Vendor PN']['value']
|
|
transceiver_info_dict['hardware_rev'] = sfp_vendor_rev_data['data']['Vendor Rev']['value']
|
|
transceiver_info_dict['serial'] = sfp_vendor_sn_data['data']['Vendor SN']['value']
|
|
transceiver_info_dict['vendor_oui'] = 'N/A'
|
|
transceiver_info_dict['vendor_date'] = 'N/A'
|
|
transceiver_info_dict['connector'] = 'N/A'
|
|
transceiver_info_dict['encoding'] = 'N/A'
|
|
transceiver_info_dict['ext_identifier'] = 'N/A'
|
|
transceiver_info_dict['ext_rateselect_compliance'] = 'N/A'
|
|
transceiver_info_dict['cable_type'] = 'N/A'
|
|
transceiver_info_dict['cable_length'] = 'N/A'
|
|
transceiver_info_dict['specification_compliance'] = 'N/A'
|
|
transceiver_info_dict['nominal_bit_rate'] = 'N/A'
|
|
transceiver_info_dict['application_advertisement'] = 'N/A'
|
|
|
|
elif self.sfp_type == QSFP_TYPE:
|
|
offset = 128
|
|
vendor_rev_width = XCVR_HW_REV_WIDTH_QSFP
|
|
cable_length_width = XCVR_CABLE_LENGTH_WIDTH_QSFP
|
|
interface_info_bulk_width = XCVR_INTFACE_BULK_WIDTH_QSFP
|
|
sfp_type = 'QSFP'
|
|
|
|
sfpi_obj = sff8436InterfaceId()
|
|
if sfpi_obj is None:
|
|
print("Error: sfp_object open failed")
|
|
return None
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
offset = 128
|
|
|
|
sfpi_obj = qsfp_dd_InterfaceId()
|
|
if sfpi_obj is None:
|
|
print("Error: sfp_object open failed")
|
|
return None
|
|
|
|
sfp_type_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_TYPE_OFFSET), XCVR_TYPE_WIDTH)
|
|
if sfp_type_raw is not None:
|
|
sfp_type_data = sfpi_obj.parse_sfp_type(sfp_type_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_name_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_VENDOR_NAME_OFFSET), XCVR_VENDOR_NAME_WIDTH)
|
|
if sfp_vendor_name_raw is not None:
|
|
sfp_vendor_name_data = sfpi_obj.parse_vendor_name(sfp_vendor_name_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_pn_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_VENDOR_PN_OFFSET), XCVR_VENDOR_PN_WIDTH)
|
|
if sfp_vendor_pn_raw is not None:
|
|
sfp_vendor_pn_data = sfpi_obj.parse_vendor_pn(sfp_vendor_pn_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_rev_raw = self._read_eeprom_specific_bytes((offset + XCVR_HW_REV_OFFSET_QSFP_DD), XCVR_HW_REV_WIDTH_QSFP_DD)
|
|
if sfp_vendor_rev_raw is not None:
|
|
sfp_vendor_rev_data = sfpi_obj.parse_vendor_rev(sfp_vendor_rev_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_sn_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_VENDOR_SN_OFFSET), XCVR_VENDOR_SN_WIDTH)
|
|
if sfp_vendor_sn_raw is not None:
|
|
sfp_vendor_sn_data = sfpi_obj.parse_vendor_sn(sfp_vendor_sn_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_oui_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_VENDOR_OUI_OFFSET), XCVR_VENDOR_OUI_WIDTH)
|
|
if sfp_vendor_oui_raw is not None:
|
|
sfp_vendor_oui_data = sfpi_obj.parse_vendor_oui(sfp_vendor_oui_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_vendor_date_raw = self._read_eeprom_specific_bytes((offset + XCVR_VENDOR_DATE_OFFSET_QSFP_DD), XCVR_VENDOR_DATE_WIDTH_QSFP_DD)
|
|
if sfp_vendor_date_raw is not None:
|
|
sfp_vendor_date_data = sfpi_obj.parse_vendor_date(sfp_vendor_date_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_connector_raw = self._read_eeprom_specific_bytes((offset + XCVR_CONNECTOR_OFFSET_QSFP_DD), XCVR_CONNECTOR_WIDTH_QSFP_DD)
|
|
if sfp_connector_raw is not None:
|
|
sfp_connector_data = sfpi_obj.parse_connector(sfp_connector_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_ext_identifier_raw = self._read_eeprom_specific_bytes((offset + XCVR_EXT_TYPE_OFFSET_QSFP_DD), XCVR_EXT_TYPE_WIDTH_QSFP_DD)
|
|
if sfp_ext_identifier_raw is not None:
|
|
sfp_ext_identifier_data = sfpi_obj.parse_ext_iden(sfp_ext_identifier_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_cable_len_raw = self._read_eeprom_specific_bytes((offset + XCVR_CABLE_LENGTH_OFFSET_QSFP_DD), XCVR_CABLE_LENGTH_WIDTH_QSFP_DD)
|
|
if sfp_cable_len_raw is not None:
|
|
sfp_cable_len_data = sfpi_obj.parse_cable_len(sfp_cable_len_raw, 0)
|
|
else:
|
|
return None
|
|
|
|
sfp_media_type_raw = self._read_eeprom_specific_bytes(XCVR_MEDIA_TYPE_OFFSET_QSFP_DD, XCVR_MEDIA_TYPE_WIDTH_QSFP_DD)
|
|
if sfp_media_type_raw is not None:
|
|
sfp_media_type_dict = sfpi_obj.parse_media_type(sfp_media_type_raw, 0)
|
|
if sfp_media_type_dict is None:
|
|
return None
|
|
|
|
host_media_list = ""
|
|
sfp_application_type_first_list = self._read_eeprom_specific_bytes((XCVR_FIRST_APPLICATION_LIST_OFFSET_QSFP_DD), XCVR_FIRST_APPLICATION_LIST_WIDTH_QSFP_DD)
|
|
if self.second_application_list:
|
|
possible_application_count = 15
|
|
sfp_application_type_second_list = self._read_eeprom_specific_bytes((XCVR_SECOND_APPLICATION_LIST_OFFSET_QSFP_DD), XCVR_SECOND_APPLICATION_LIST_WIDTH_QSFP_DD)
|
|
if sfp_application_type_first_list is not None and sfp_application_type_second_list is not None:
|
|
sfp_application_type_list = sfp_application_type_first_list + sfp_application_type_second_list
|
|
else:
|
|
return None
|
|
else:
|
|
possible_application_count = 8
|
|
if sfp_application_type_first_list is not None:
|
|
sfp_application_type_list = sfp_application_type_first_list
|
|
else:
|
|
return None
|
|
|
|
for i in range(0, possible_application_count):
|
|
if sfp_application_type_list[i * 4] == 'ff':
|
|
break
|
|
host_electrical, media_interface = sfpi_obj.parse_application(sfp_media_type_dict, sfp_application_type_list[i * 4], sfp_application_type_list[i * 4 + 1])
|
|
host_media_list = host_media_list + host_electrical + ' - ' + media_interface + '\n\t\t\t\t '
|
|
else:
|
|
return None
|
|
|
|
transceiver_info_dict['type'] = str(sfp_type_data['data']['type']['value'])
|
|
transceiver_info_dict['manufacturer'] = str(sfp_vendor_name_data['data']['Vendor Name']['value'])
|
|
transceiver_info_dict['model'] = str(sfp_vendor_pn_data['data']['Vendor PN']['value'])
|
|
transceiver_info_dict['hardware_rev'] = str(sfp_vendor_rev_data['data']['Vendor Rev']['value'])
|
|
transceiver_info_dict['serial'] = str(sfp_vendor_sn_data['data']['Vendor SN']['value'])
|
|
transceiver_info_dict['vendor_oui'] = str(sfp_vendor_oui_data['data']['Vendor OUI']['value'])
|
|
transceiver_info_dict['vendor_date'] = str(sfp_vendor_date_data['data']['VendorDataCode(YYYY-MM-DD Lot)']['value'])
|
|
transceiver_info_dict['connector'] = str(sfp_connector_data['data']['Connector']['value'])
|
|
transceiver_info_dict['encoding'] = "Not supported for CMIS cables"
|
|
transceiver_info_dict['ext_identifier'] = str(sfp_ext_identifier_data['data']['Extended Identifier']['value'])
|
|
transceiver_info_dict['ext_rateselect_compliance'] = "Not supported for CMIS cables"
|
|
transceiver_info_dict['specification_compliance'] = "Not supported for CMIS cables"
|
|
transceiver_info_dict['cable_type'] = "Length Cable Assembly(m)"
|
|
transceiver_info_dict['cable_length'] = str(sfp_cable_len_data['data']['Length Cable Assembly(m)']['value'])
|
|
transceiver_info_dict['nominal_bit_rate'] = "Not supported for CMIS cables"
|
|
transceiver_info_dict['application_advertisement'] = host_media_list
|
|
|
|
else:
|
|
offset = 0
|
|
vendor_rev_width = XCVR_HW_REV_WIDTH_SFP
|
|
cable_length_width = XCVR_CABLE_LENGTH_WIDTH_SFP
|
|
interface_info_bulk_width = XCVR_INTFACE_BULK_WIDTH_SFP
|
|
sfp_type = 'SFP'
|
|
|
|
sfpi_obj = sff8472InterfaceId()
|
|
if sfpi_obj is None:
|
|
print("Error: sfp_object open failed")
|
|
return None
|
|
|
|
if self.sfp_type != QSFP_DD_TYPE:
|
|
sfp_interface_bulk_raw = self._read_eeprom_specific_bytes(offset + XCVR_INTERFACE_DATA_START, XCVR_INTERFACE_DATA_SIZE)
|
|
if sfp_interface_bulk_raw is None:
|
|
return None
|
|
|
|
start = XCVR_INTFACE_BULK_OFFSET - XCVR_INTERFACE_DATA_START
|
|
end = start + interface_info_bulk_width
|
|
sfp_interface_bulk_data = sfpi_obj.parse_sfp_info_bulk(sfp_interface_bulk_raw[start : end], 0)
|
|
|
|
start = XCVR_VENDOR_NAME_OFFSET - XCVR_INTERFACE_DATA_START
|
|
end = start + XCVR_VENDOR_NAME_WIDTH
|
|
sfp_vendor_name_data = sfpi_obj.parse_vendor_name(sfp_interface_bulk_raw[start : end], 0)
|
|
|
|
start = XCVR_VENDOR_PN_OFFSET - XCVR_INTERFACE_DATA_START
|
|
end = start + XCVR_VENDOR_PN_WIDTH
|
|
sfp_vendor_pn_data = sfpi_obj.parse_vendor_pn(sfp_interface_bulk_raw[start : end], 0)
|
|
|
|
start = XCVR_HW_REV_OFFSET - XCVR_INTERFACE_DATA_START
|
|
end = start + vendor_rev_width
|
|
sfp_vendor_rev_data = sfpi_obj.parse_vendor_rev(sfp_interface_bulk_raw[start : end], 0)
|
|
|
|
start = XCVR_VENDOR_SN_OFFSET - XCVR_INTERFACE_DATA_START
|
|
end = start + XCVR_VENDOR_SN_WIDTH
|
|
sfp_vendor_sn_data = sfpi_obj.parse_vendor_sn(sfp_interface_bulk_raw[start : end], 0)
|
|
|
|
start = XCVR_VENDOR_OUI_OFFSET - XCVR_INTERFACE_DATA_START
|
|
end = start + XCVR_VENDOR_OUI_WIDTH
|
|
sfp_vendor_oui_data = sfpi_obj.parse_vendor_oui(sfp_interface_bulk_raw[start : end], 0)
|
|
|
|
start = XCVR_VENDOR_DATE_OFFSET - XCVR_INTERFACE_DATA_START
|
|
end = start + XCVR_VENDOR_DATE_WIDTH
|
|
sfp_vendor_date_data = sfpi_obj.parse_vendor_date(sfp_interface_bulk_raw[start : end], 0)
|
|
|
|
transceiver_info_dict['type'] = sfp_interface_bulk_data['data']['type']['value']
|
|
transceiver_info_dict['manufacturer'] = sfp_vendor_name_data['data']['Vendor Name']['value']
|
|
transceiver_info_dict['model'] = sfp_vendor_pn_data['data']['Vendor PN']['value']
|
|
transceiver_info_dict['hardware_rev'] = sfp_vendor_rev_data['data']['Vendor Rev']['value']
|
|
transceiver_info_dict['serial'] = sfp_vendor_sn_data['data']['Vendor SN']['value']
|
|
transceiver_info_dict['vendor_oui'] = sfp_vendor_oui_data['data']['Vendor OUI']['value']
|
|
transceiver_info_dict['vendor_date'] = sfp_vendor_date_data['data']['VendorDataCode(YYYY-MM-DD Lot)']['value']
|
|
transceiver_info_dict['connector'] = sfp_interface_bulk_data['data']['Connector']['value']
|
|
transceiver_info_dict['encoding'] = sfp_interface_bulk_data['data']['EncodingCodes']['value']
|
|
transceiver_info_dict['ext_identifier'] = sfp_interface_bulk_data['data']['Extended Identifier']['value']
|
|
transceiver_info_dict['ext_rateselect_compliance'] = sfp_interface_bulk_data['data']['RateIdentifier']['value']
|
|
transceiver_info_dict['application_advertisement'] = 'N/A'
|
|
|
|
if self.sfp_type == QSFP_TYPE:
|
|
for key in qsfp_cable_length_tup:
|
|
if key in sfp_interface_bulk_data['data']:
|
|
transceiver_info_dict['cable_type'] = key
|
|
transceiver_info_dict['cable_length'] = str(sfp_interface_bulk_data['data'][key]['value'])
|
|
|
|
for key in qsfp_compliance_code_tup:
|
|
if key in sfp_interface_bulk_data['data']['Specification compliance']['value']:
|
|
compliance_code_dict[key] = sfp_interface_bulk_data['data']['Specification compliance']['value'][key]['value']
|
|
sfp_ext_specification_compliance_raw = self._read_eeprom_specific_bytes(offset + XCVR_EXT_SPECIFICATION_COMPLIANCE_OFFSET, XCVR_EXT_SPECIFICATION_COMPLIANCE_WIDTH)
|
|
if sfp_ext_specification_compliance_raw is not None:
|
|
sfp_ext_specification_compliance_data = sfpi_obj.parse_ext_specification_compliance(sfp_ext_specification_compliance_raw[0 : 1], 0)
|
|
if sfp_ext_specification_compliance_data['data']['Extended Specification compliance']['value'] != "Unspecified":
|
|
compliance_code_dict['Extended Specification compliance'] = sfp_ext_specification_compliance_data['data']['Extended Specification compliance']['value']
|
|
transceiver_info_dict['specification_compliance'] = str(compliance_code_dict)
|
|
|
|
transceiver_info_dict['nominal_bit_rate'] = str(sfp_interface_bulk_data['data']['Nominal Bit Rate(100Mbs)']['value'])
|
|
else:
|
|
for key in sfp_cable_length_tup:
|
|
if key in sfp_interface_bulk_data['data']:
|
|
transceiver_info_dict['cable_type'] = key
|
|
transceiver_info_dict['cable_length'] = str(sfp_interface_bulk_data['data'][key]['value'])
|
|
|
|
for key in sfp_compliance_code_tup:
|
|
if key in sfp_interface_bulk_data['data']['Specification compliance']['value']:
|
|
compliance_code_dict[key] = sfp_interface_bulk_data['data']['Specification compliance']['value'][key]['value']
|
|
transceiver_info_dict['specification_compliance'] = str(compliance_code_dict)
|
|
|
|
transceiver_info_dict['nominal_bit_rate'] = str(sfp_interface_bulk_data['data']['NominalSignallingRate(UnitsOf100Mbd)']['value'])
|
|
|
|
return transceiver_info_dict
|
|
|
|
|
|
def get_transceiver_bulk_status(self):
|
|
"""
|
|
Retrieves transceiver bulk status of this SFP
|
|
|
|
Returns:
|
|
A dict which contains following keys/values :
|
|
========================================================================
|
|
keys |Value Format |Information
|
|
---------------------------|---------------|----------------------------
|
|
RX LOS |BOOLEAN |RX lost-of-signal status,
|
|
| |True if has RX los, False if not.
|
|
TX FAULT |BOOLEAN |TX fault status,
|
|
| |True if has TX fault, False if not.
|
|
Reset status |BOOLEAN |reset status,
|
|
| |True if SFP in reset, False if not.
|
|
LP mode |BOOLEAN |low power mode status,
|
|
| |True in lp mode, False if not.
|
|
TX disable |BOOLEAN |TX disable status,
|
|
| |True TX disabled, False if not.
|
|
TX disabled channel |HEX |disabled TX channles in hex,
|
|
| |bits 0 to 3 represent channel 0
|
|
| |to channel 3.
|
|
Temperature |INT |module temperature in Celsius
|
|
Voltage |INT |supply voltage in mV
|
|
TX bias |INT |TX Bias Current in mA
|
|
RX power |INT |received optical power in mW
|
|
TX power |INT |TX output power in mW
|
|
========================================================================
|
|
"""
|
|
transceiver_dom_info_dict = {}
|
|
|
|
dom_info_dict_keys = ['temperature', 'voltage',
|
|
'rx1power', 'rx2power',
|
|
'rx3power', 'rx4power',
|
|
'rx5power', 'rx6power',
|
|
'rx7power', 'rx8power',
|
|
'tx1bias', 'tx2bias',
|
|
'tx3bias', 'tx4bias',
|
|
'tx5bias', 'tx6bias',
|
|
'tx7bias', 'tx8bias',
|
|
'tx1power', 'tx2power',
|
|
'tx3power', 'tx4power',
|
|
'tx5power', 'tx6power',
|
|
'tx7power', 'tx8power'
|
|
]
|
|
transceiver_dom_info_dict = dict.fromkeys(dom_info_dict_keys, 'N/A')
|
|
|
|
if self.sfp_type == OSFP_TYPE:
|
|
pass
|
|
|
|
elif self.sfp_type == QSFP_TYPE:
|
|
if not self.dom_supported:
|
|
return transceiver_dom_info_dict
|
|
|
|
offset = 0
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return transceiver_dom_info_dict
|
|
|
|
dom_data_raw = self._read_eeprom_specific_bytes((offset + QSFP_DOM_BULK_DATA_START), QSFP_DOM_BULK_DATA_SIZE)
|
|
if dom_data_raw is None:
|
|
return transceiver_dom_info_dict
|
|
|
|
if self.dom_temp_supported:
|
|
start = QSFP_TEMPE_OFFSET - QSFP_DOM_BULK_DATA_START
|
|
end = start + QSFP_TEMPE_WIDTH
|
|
dom_temperature_data = sfpd_obj.parse_temperature(dom_data_raw[start : end], 0)
|
|
temp = self._convert_string_to_num(dom_temperature_data['data']['Temperature']['value'])
|
|
if temp is not None:
|
|
transceiver_dom_info_dict['temperature'] = temp
|
|
|
|
if self.dom_volt_supported:
|
|
start = QSFP_VOLT_OFFSET - QSFP_DOM_BULK_DATA_START
|
|
end = start + QSFP_VOLT_WIDTH
|
|
dom_voltage_data = sfpd_obj.parse_voltage(dom_data_raw[start : end], 0)
|
|
volt = self._convert_string_to_num(dom_voltage_data['data']['Vcc']['value'])
|
|
if volt is not None:
|
|
transceiver_dom_info_dict['voltage'] = volt
|
|
|
|
start = QSFP_CHANNL_MON_OFFSET - QSFP_DOM_BULK_DATA_START
|
|
end = start + QSFP_CHANNL_MON_WITH_TX_POWER_WIDTH
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params_with_tx_power(dom_data_raw[start : end], 0)
|
|
|
|
if self.dom_tx_power_supported:
|
|
transceiver_dom_info_dict['tx1power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['TX1Power']['value'])
|
|
transceiver_dom_info_dict['tx2power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['TX2Power']['value'])
|
|
transceiver_dom_info_dict['tx3power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['TX3Power']['value'])
|
|
transceiver_dom_info_dict['tx4power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['TX4Power']['value'])
|
|
|
|
if self.dom_rx_power_supported:
|
|
transceiver_dom_info_dict['rx1power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['RX1Power']['value'])
|
|
transceiver_dom_info_dict['rx2power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['RX2Power']['value'])
|
|
transceiver_dom_info_dict['rx3power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['RX3Power']['value'])
|
|
transceiver_dom_info_dict['rx4power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['RX4Power']['value'])
|
|
|
|
transceiver_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data']['TX1Bias']['value']
|
|
transceiver_dom_info_dict['tx2bias'] = dom_channel_monitor_data['data']['TX2Bias']['value']
|
|
transceiver_dom_info_dict['tx3bias'] = dom_channel_monitor_data['data']['TX3Bias']['value']
|
|
transceiver_dom_info_dict['tx4bias'] = dom_channel_monitor_data['data']['TX4Bias']['value']
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
|
|
offset = 0
|
|
sfpd_obj = qsfp_dd_Dom()
|
|
if sfpd_obj is None:
|
|
return transceiver_dom_info_dict
|
|
|
|
dom_data_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_DOM_BULK_DATA_START), QSFP_DD_DOM_BULK_DATA_SIZE)
|
|
if dom_data_raw is None:
|
|
return transceiver_dom_info_dict
|
|
|
|
if self.dom_temp_supported:
|
|
start = QSFP_DD_TEMPE_OFFSET - QSFP_DD_DOM_BULK_DATA_START
|
|
end = start + QSFP_DD_TEMPE_WIDTH
|
|
dom_temperature_data = sfpd_obj.parse_temperature(dom_data_raw[start : end], 0)
|
|
temp = self._convert_string_to_num(dom_temperature_data['data']['Temperature']['value'])
|
|
if temp is not None:
|
|
transceiver_dom_info_dict['temperature'] = temp
|
|
|
|
if self.dom_volt_supported:
|
|
start = QSFP_DD_VOLT_OFFSET - QSFP_DD_DOM_BULK_DATA_START
|
|
end = start + QSFP_DD_VOLT_WIDTH
|
|
dom_voltage_data = sfpd_obj.parse_voltage(dom_data_raw[start : end], 0)
|
|
volt = self._convert_string_to_num(dom_voltage_data['data']['Vcc']['value'])
|
|
if volt is not None:
|
|
transceiver_dom_info_dict['voltage'] = volt
|
|
|
|
if self.dom_rx_tx_power_bias_supported:
|
|
# page 11h
|
|
offset = 512
|
|
dom_data_raw = self._read_eeprom_specific_bytes(offset + QSFP_DD_CHANNL_MON_OFFSET, QSFP_DD_CHANNL_MON_WIDTH)
|
|
if dom_data_raw is None:
|
|
return transceiver_dom_info_dict
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(dom_data_raw, 0)
|
|
|
|
if self.dom_tx_power_supported:
|
|
transceiver_dom_info_dict['tx1power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['TX1Power']['value']))
|
|
transceiver_dom_info_dict['tx2power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['TX2Power']['value']))
|
|
transceiver_dom_info_dict['tx3power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['TX3Power']['value']))
|
|
transceiver_dom_info_dict['tx4power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['TX4Power']['value']))
|
|
transceiver_dom_info_dict['tx5power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['TX5Power']['value']))
|
|
transceiver_dom_info_dict['tx6power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['TX6Power']['value']))
|
|
transceiver_dom_info_dict['tx7power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['TX7Power']['value']))
|
|
transceiver_dom_info_dict['tx8power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['TX8Power']['value']))
|
|
|
|
if self.dom_rx_power_supported:
|
|
transceiver_dom_info_dict['rx1power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['RX1Power']['value']))
|
|
transceiver_dom_info_dict['rx2power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['RX2Power']['value']))
|
|
transceiver_dom_info_dict['rx3power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['RX3Power']['value']))
|
|
transceiver_dom_info_dict['rx4power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['RX4Power']['value']))
|
|
transceiver_dom_info_dict['rx5power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['RX5Power']['value']))
|
|
transceiver_dom_info_dict['rx6power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['RX6Power']['value']))
|
|
transceiver_dom_info_dict['rx7power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['RX7Power']['value']))
|
|
transceiver_dom_info_dict['rx8power'] = str(self._convert_string_to_num(dom_channel_monitor_data['data']['RX8Power']['value']))
|
|
|
|
if self.dom_tx_bias_power_supported:
|
|
transceiver_dom_info_dict['tx1bias'] = str(dom_channel_monitor_data['data']['TX1Bias']['value'])
|
|
transceiver_dom_info_dict['tx2bias'] = str(dom_channel_monitor_data['data']['TX2Bias']['value'])
|
|
transceiver_dom_info_dict['tx3bias'] = str(dom_channel_monitor_data['data']['TX3Bias']['value'])
|
|
transceiver_dom_info_dict['tx4bias'] = str(dom_channel_monitor_data['data']['TX4Bias']['value'])
|
|
transceiver_dom_info_dict['tx5bias'] = str(dom_channel_monitor_data['data']['TX5Bias']['value'])
|
|
transceiver_dom_info_dict['tx6bias'] = str(dom_channel_monitor_data['data']['TX6Bias']['value'])
|
|
transceiver_dom_info_dict['tx7bias'] = str(dom_channel_monitor_data['data']['TX7Bias']['value'])
|
|
transceiver_dom_info_dict['tx8bias'] = str(dom_channel_monitor_data['data']['TX8Bias']['value'])
|
|
|
|
return transceiver_dom_info_dict
|
|
|
|
else:
|
|
if not self.dom_supported:
|
|
return transceiver_dom_info_dict
|
|
|
|
offset = 256
|
|
sfpd_obj = sff8472Dom()
|
|
if sfpd_obj is None:
|
|
return transceiver_dom_info_dict
|
|
sfpd_obj._calibration_type = self.calibration
|
|
|
|
dom_data_raw = self._read_eeprom_specific_bytes((offset + SFP_DOM_BULK_DATA_START), SFP_DOM_BULK_DATA_SIZE)
|
|
|
|
start = SFP_TEMPE_OFFSET - SFP_DOM_BULK_DATA_START
|
|
end = start + SFP_TEMPE_WIDTH
|
|
dom_temperature_data = sfpd_obj.parse_temperature(dom_data_raw[start: end], 0)
|
|
|
|
start = SFP_VOLT_OFFSET - SFP_DOM_BULK_DATA_START
|
|
end = start + SFP_VOLT_WIDTH
|
|
dom_voltage_data = sfpd_obj.parse_voltage(dom_data_raw[start: end], 0)
|
|
|
|
start = SFP_CHANNL_MON_OFFSET - SFP_DOM_BULK_DATA_START
|
|
end = start + SFP_CHANNL_MON_WIDTH
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(dom_data_raw[start: end], 0)
|
|
|
|
transceiver_dom_info_dict['temperature'] = self._convert_string_to_num(dom_temperature_data['data']['Temperature']['value'])
|
|
transceiver_dom_info_dict['voltage'] = self._convert_string_to_num(dom_voltage_data['data']['Vcc']['value'])
|
|
transceiver_dom_info_dict['rx1power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['RXPower']['value'])
|
|
transceiver_dom_info_dict['tx1bias'] = self._convert_string_to_num(dom_channel_monitor_data['data']['TXBias']['value'])
|
|
transceiver_dom_info_dict['tx1power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['TXPower']['value'])
|
|
|
|
return transceiver_dom_info_dict
|
|
|
|
|
|
def get_transceiver_threshold_info(self):
|
|
"""
|
|
Retrieves transceiver threshold info of this SFP
|
|
|
|
Returns:
|
|
A dict which contains following keys/values :
|
|
========================================================================
|
|
keys |Value Format |Information
|
|
---------------------------|---------------|----------------------------
|
|
temphighalarm |FLOAT |High Alarm Threshold value of temperature in Celsius.
|
|
templowalarm |FLOAT |Low Alarm Threshold value of temperature in Celsius.
|
|
temphighwarning |FLOAT |High Warning Threshold value of temperature in Celsius.
|
|
templowwarning |FLOAT |Low Warning Threshold value of temperature in Celsius.
|
|
vcchighalarm |FLOAT |High Alarm Threshold value of supply voltage in mV.
|
|
vcclowalarm |FLOAT |Low Alarm Threshold value of supply voltage in mV.
|
|
vcchighwarning |FLOAT |High Warning Threshold value of supply voltage in mV.
|
|
vcclowwarning |FLOAT |Low Warning Threshold value of supply voltage in mV.
|
|
rxpowerhighalarm |FLOAT |High Alarm Threshold value of received power in dBm.
|
|
rxpowerlowalarm |FLOAT |Low Alarm Threshold value of received power in dBm.
|
|
rxpowerhighwarning |FLOAT |High Warning Threshold value of received power in dBm.
|
|
rxpowerlowwarning |FLOAT |Low Warning Threshold value of received power in dBm.
|
|
txpowerhighalarm |FLOAT |High Alarm Threshold value of transmit power in dBm.
|
|
txpowerlowalarm |FLOAT |Low Alarm Threshold value of transmit power in dBm.
|
|
txpowerhighwarning |FLOAT |High Warning Threshold value of transmit power in dBm.
|
|
txpowerlowwarning |FLOAT |Low Warning Threshold value of transmit power in dBm.
|
|
txbiashighalarm |FLOAT |High Alarm Threshold value of tx Bias Current in mA.
|
|
txbiaslowalarm |FLOAT |Low Alarm Threshold value of tx Bias Current in mA.
|
|
txbiashighwarning |FLOAT |High Warning Threshold value of tx Bias Current in mA.
|
|
txbiaslowwarning |FLOAT |Low Warning Threshold value of tx Bias Current in mA.
|
|
========================================================================
|
|
"""
|
|
transceiver_dom_threshold_info_dict = {}
|
|
|
|
dom_info_dict_keys = ['temphighalarm', 'temphighwarning',
|
|
'templowalarm', 'templowwarning',
|
|
'vcchighalarm', 'vcchighwarning',
|
|
'vcclowalarm', 'vcclowwarning',
|
|
'rxpowerhighalarm', 'rxpowerhighwarning',
|
|
'rxpowerlowalarm', 'rxpowerlowwarning',
|
|
'txpowerhighalarm', 'txpowerhighwarning',
|
|
'txpowerlowalarm', 'txpowerlowwarning',
|
|
'txbiashighalarm', 'txbiashighwarning',
|
|
'txbiaslowalarm', 'txbiaslowwarning'
|
|
]
|
|
transceiver_dom_threshold_info_dict = dict.fromkeys(dom_info_dict_keys, 'N/A')
|
|
|
|
if self.sfp_type == OSFP_TYPE:
|
|
pass
|
|
|
|
elif self.sfp_type == QSFP_TYPE:
|
|
if not self.dom_supported or not self.qsfp_page3_available:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
# Dom Threshold data starts from offset 384
|
|
# Revert offset back to 0 once data is retrieved
|
|
offset = QSFP_MODULE_UPPER_PAGE3_START
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
dom_module_threshold_raw = self._read_eeprom_specific_bytes((offset + QSFP_MODULE_THRESHOLD_OFFSET), QSFP_MODULE_THRESHOLD_WIDTH)
|
|
if dom_module_threshold_raw is None:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
dom_module_threshold_data = sfpd_obj.parse_module_threshold_values(dom_module_threshold_raw, 0)
|
|
|
|
dom_channel_threshold_raw = self._read_eeprom_specific_bytes((offset + QSFP_CHANNL_THRESHOLD_OFFSET),
|
|
QSFP_CHANNL_THRESHOLD_WIDTH)
|
|
if dom_channel_threshold_raw is None:
|
|
return transceiver_dom_threshold_info_dict
|
|
dom_channel_threshold_data = sfpd_obj.parse_channel_threshold_values(dom_channel_threshold_raw, 0)
|
|
|
|
# Threshold Data
|
|
transceiver_dom_threshold_info_dict['temphighalarm'] = dom_module_threshold_data['data']['TempHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['temphighwarning'] = dom_module_threshold_data['data']['TempHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['templowalarm'] = dom_module_threshold_data['data']['TempLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['templowwarning'] = dom_module_threshold_data['data']['TempLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighalarm'] = dom_module_threshold_data['data']['VccHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighwarning'] = dom_module_threshold_data['data']['VccHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowalarm'] = dom_module_threshold_data['data']['VccLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowwarning'] = dom_module_threshold_data['data']['VccLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighalarm'] = dom_channel_threshold_data['data']['RxPowerHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighwarning'] = dom_channel_threshold_data['data']['RxPowerHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowalarm'] = dom_channel_threshold_data['data']['RxPowerLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowwarning'] = dom_channel_threshold_data['data']['RxPowerLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighalarm'] = dom_channel_threshold_data['data']['TxBiasHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighwarning'] = dom_channel_threshold_data['data']['TxBiasHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowalarm'] = dom_channel_threshold_data['data']['TxBiasLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowwarning'] = dom_channel_threshold_data['data']['TxBiasLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerhighalarm'] = dom_channel_threshold_data['data']['TxPowerHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerhighwarning'] = dom_channel_threshold_data['data']['TxPowerHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerlowalarm'] = dom_channel_threshold_data['data']['TxPowerLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerlowwarning'] = dom_channel_threshold_data['data']['TxPowerLowWarning']['value']
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
if not self.dom_supported:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
if not self.dom_thresholds_supported:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
sfpd_obj = qsfp_dd_Dom()
|
|
if sfpd_obj is None:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
# page 02
|
|
offset = 384
|
|
dom_module_threshold_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_MODULE_THRESHOLD_OFFSET), QSFP_DD_MODULE_THRESHOLD_WIDTH)
|
|
if dom_module_threshold_raw is None:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
dom_module_threshold_data = sfpd_obj.parse_module_threshold_values(dom_module_threshold_raw, 0)
|
|
|
|
# Threshold Data
|
|
transceiver_dom_threshold_info_dict['temphighalarm'] = dom_module_threshold_data['data']['TempHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['temphighwarning'] = dom_module_threshold_data['data']['TempHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['templowalarm'] = dom_module_threshold_data['data']['TempLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['templowwarning'] = dom_module_threshold_data['data']['TempLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighalarm'] = dom_module_threshold_data['data']['VccHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighwarning'] = dom_module_threshold_data['data']['VccHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowalarm'] = dom_module_threshold_data['data']['VccLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowwarning'] = dom_module_threshold_data['data']['VccLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighalarm'] = dom_module_threshold_data['data']['RxPowerHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighwarning'] = dom_module_threshold_data['data']['RxPowerHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowalarm'] = dom_module_threshold_data['data']['RxPowerLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowwarning'] = dom_module_threshold_data['data']['RxPowerLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighalarm'] = dom_module_threshold_data['data']['TxBiasHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighwarning'] = dom_module_threshold_data['data']['TxBiasHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowalarm'] = dom_module_threshold_data['data']['TxBiasLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowwarning'] = dom_module_threshold_data['data']['TxBiasLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerhighalarm'] = dom_module_threshold_data['data']['TxPowerHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerhighwarning'] = dom_module_threshold_data['data']['TxPowerHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerlowalarm'] = dom_module_threshold_data['data']['TxPowerLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerlowwarning'] = dom_module_threshold_data['data']['TxPowerLowWarning']['value']
|
|
|
|
else:
|
|
offset = SFP_MODULE_ADDRA2_OFFSET
|
|
|
|
if not self.dom_supported:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
sfpd_obj = sff8472Dom(None, self.calibration)
|
|
if sfpd_obj is None:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
dom_module_threshold_raw = self._read_eeprom_specific_bytes((offset + SFP_MODULE_THRESHOLD_OFFSET),
|
|
SFP_MODULE_THRESHOLD_WIDTH)
|
|
if dom_module_threshold_raw is not None:
|
|
dom_module_threshold_data = sfpd_obj.parse_alarm_warning_threshold(dom_module_threshold_raw, 0)
|
|
else:
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
# Threshold Data
|
|
transceiver_dom_threshold_info_dict['temphighalarm'] = dom_module_threshold_data['data']['TempHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['templowalarm'] = dom_module_threshold_data['data']['TempLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['temphighwarning'] = dom_module_threshold_data['data']['TempHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['templowwarning'] = dom_module_threshold_data['data']['TempLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighalarm'] = dom_module_threshold_data['data']['VoltageHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowalarm'] = dom_module_threshold_data['data']['VoltageLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['vcchighwarning'] = dom_module_threshold_data['data']['VoltageHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['vcclowwarning'] = dom_module_threshold_data['data']['VoltageLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighalarm'] = dom_module_threshold_data['data']['BiasHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowalarm'] = dom_module_threshold_data['data']['BiasLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txbiashighwarning'] = dom_module_threshold_data['data']['BiasHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txbiaslowwarning'] = dom_module_threshold_data['data']['BiasLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerhighalarm'] = dom_module_threshold_data['data']['TXPowerHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerlowalarm'] = dom_module_threshold_data['data']['TXPowerLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerhighwarning'] = dom_module_threshold_data['data']['TXPowerHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['txpowerlowwarning'] = dom_module_threshold_data['data']['TXPowerLowWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighalarm'] = dom_module_threshold_data['data']['RXPowerHighAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowalarm'] = dom_module_threshold_data['data']['RXPowerLowAlarm']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerhighwarning'] = dom_module_threshold_data['data']['RXPowerHighWarning']['value']
|
|
transceiver_dom_threshold_info_dict['rxpowerlowwarning'] = dom_module_threshold_data['data']['RXPowerLowWarning']['value']
|
|
|
|
return transceiver_dom_threshold_info_dict
|
|
|
|
|
|
def get_reset_status(self):
|
|
"""
|
|
Retrieves the reset status of SFP
|
|
|
|
Returns:
|
|
A Boolean, True if reset enabled, False if disabled
|
|
|
|
for QSFP, originally I would like to make use of Initialization complete flag bit
|
|
which is at Page a0 offset 6 bit 0 to test whether reset is complete.
|
|
However as unit testing was carried out I find this approach may fail because:
|
|
1. we make use of ethtool to read data on I2C bus rather than to read directly
|
|
2. ethtool is unable to access I2C during QSFP module being reset
|
|
In other words, whenever the flag is able to be retrived, the value is always be 1
|
|
As a result, it doesn't make sense to retrieve that flag. Just treat successfully
|
|
retrieving data as "data ready".
|
|
for SFP it seems that there is not flag indicating whether reset succeed. However,
|
|
we can also do it in the way for QSFP.
|
|
"""
|
|
if not self.dom_supported:
|
|
return False
|
|
|
|
if self.sfp_type == OSFP_TYPE:
|
|
return False
|
|
elif self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
sfpd_obj = sff8436Dom()
|
|
dom_module_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_MODULE_MONITOR_OFFSET), QSFP_MODULE_MONITOR_WIDTH)
|
|
|
|
if dom_module_monitor_raw is not None:
|
|
return True
|
|
else:
|
|
return False
|
|
elif self.sfp_type == SFP_TYPE:
|
|
offset = 0
|
|
sfpd_obj = sff8472Dom()
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + SFP_CHANNL_STATUS_OFFSET), SFP_CHANNL_STATUS_WIDTH)
|
|
|
|
if dom_channel_monitor_raw is not None:
|
|
return True
|
|
else:
|
|
return False
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
offset = 0
|
|
sfpd_obj = qsfp_dd_Dom()
|
|
dom_channel_status_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_CHANNL_STATUS_OFFSET), QSFP_DD_CHANNL_STATUS_WIDTH)
|
|
|
|
if dom_channel_status_raw is None:
|
|
return False
|
|
|
|
dom_channel_status_data = sfpd_obj.parse_dom_channel_status(dom_channel_status_raw, 0)
|
|
return dom_channel_status_data['data']['Status']['value'] == 'On'
|
|
|
|
def get_rx_los(self):
|
|
"""
|
|
Retrieves the RX LOS (lost-of-signal) status of SFP
|
|
|
|
Returns:
|
|
A Boolean, True if SFP has RX LOS, False if not.
|
|
Note : RX LOS status is latched until a call to get_rx_los or a reset.
|
|
"""
|
|
if not self.dom_supported:
|
|
return None
|
|
|
|
rx_los_list = []
|
|
if self.sfp_type == OSFP_TYPE:
|
|
return None
|
|
elif self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_CHANNL_RX_LOS_STATUS_OFFSET), QSFP_CHANNL_RX_LOS_STATUS_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
rx_los_data = int(dom_channel_monitor_raw[0], 16)
|
|
rx_los_list.append(rx_los_data & 0x01 != 0)
|
|
rx_los_list.append(rx_los_data & 0x02 != 0)
|
|
rx_los_list.append(rx_los_data & 0x04 != 0)
|
|
rx_los_list.append(rx_los_data & 0x08 != 0)
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
# page 11h
|
|
if self.dom_rx_tx_power_bias_supported:
|
|
offset = 512
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_CHANNL_RX_LOS_STATUS_OFFSET), QSFP_DD_CHANNL_RX_LOS_STATUS_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
rx_los_data = int(dom_channel_monitor_raw[0], 8)
|
|
rx_los_list.append(rx_los_data & 0x01 != 0)
|
|
rx_los_list.append(rx_los_data & 0x02 != 0)
|
|
rx_los_list.append(rx_los_data & 0x04 != 0)
|
|
rx_los_list.append(rx_los_data & 0x08 != 0)
|
|
rx_los_list.append(rx_los_data & 0x10 != 0)
|
|
rx_los_list.append(rx_los_data & 0x20 != 0)
|
|
rx_los_list.append(rx_los_data & 0x40 != 0)
|
|
rx_los_list.append(rx_los_data & 0x80 != 0)
|
|
|
|
else:
|
|
offset = 256
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + SFP_CHANNL_STATUS_OFFSET), SFP_CHANNL_STATUS_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
rx_los_data = int(dom_channel_monitor_raw[0], 16)
|
|
rx_los_list.append(rx_los_data & 0x02 != 0)
|
|
else:
|
|
return None
|
|
return rx_los_list
|
|
|
|
|
|
def get_tx_fault(self):
|
|
"""
|
|
Retrieves the TX fault status of SFP
|
|
|
|
Returns:
|
|
A Boolean, True if SFP has TX fault, False if not
|
|
Note : TX fault status is lached until a call to get_tx_fault or a reset.
|
|
"""
|
|
if not self.dom_supported:
|
|
return None
|
|
|
|
tx_fault_list = []
|
|
if self.sfp_type == OSFP_TYPE:
|
|
return None
|
|
elif self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_CHANNL_TX_FAULT_STATUS_OFFSET), QSFP_CHANNL_TX_FAULT_STATUS_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
tx_fault_data = int(dom_channel_monitor_raw[0], 16)
|
|
tx_fault_list.append(tx_fault_data & 0x01 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x02 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x04 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x08 != 0)
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
return None
|
|
# page 11h
|
|
if self.dom_rx_tx_power_bias_supported:
|
|
offset = 512
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_CHANNL_TX_FAULT_STATUS_OFFSET), QSFP_DD_CHANNL_TX_FAULT_STATUS_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
tx_fault_data = int(dom_channel_monitor_raw[0], 8)
|
|
tx_fault_list.append(tx_fault_data & 0x01 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x02 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x04 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x08 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x10 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x20 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x40 != 0)
|
|
tx_fault_list.append(tx_fault_data & 0x80 != 0)
|
|
|
|
else:
|
|
offset = 256
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + SFP_CHANNL_STATUS_OFFSET), SFP_CHANNL_STATUS_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
tx_fault_data = int(dom_channel_monitor_raw[0], 16)
|
|
tx_fault_list.append(tx_fault_data & 0x04 != 0)
|
|
else:
|
|
return None
|
|
return tx_fault_list
|
|
|
|
|
|
def get_tx_disable(self):
|
|
"""
|
|
Retrieves the tx_disable status of this SFP
|
|
|
|
Returns:
|
|
A Boolean, True if tx_disable is enabled, False if disabled
|
|
|
|
for QSFP, the disable states of each channel which are the lower 4 bits in byte 85 page a0
|
|
for SFP, the TX Disable State and Soft TX Disable Select is ORed as the tx_disable status returned
|
|
These two bits are bit 7 & 6 in byte 110 page a2 respectively
|
|
"""
|
|
if not self.dom_supported:
|
|
return None
|
|
|
|
tx_disable_list = []
|
|
if self.sfp_type == OSFP_TYPE:
|
|
return None
|
|
elif self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_CHANNL_DISABLE_STATUS_OFFSET), QSFP_CHANNL_DISABLE_STATUS_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
tx_disable_data = int(dom_channel_monitor_raw[0], 16)
|
|
tx_disable_list.append(tx_disable_data & 0x01 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x02 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x04 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x08 != 0)
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
if self.dom_rx_tx_power_bias_supported:
|
|
offset = 128
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_CHANNL_DISABLE_STATUS_OFFSET), QSFP_DD_CHANNL_DISABLE_STATUS_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
tx_disable_data = int(dom_channel_monitor_raw[0], 16)
|
|
tx_disable_list.append(tx_disable_data & 0x01 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x02 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x04 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x08 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x10 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x20 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x40 != 0)
|
|
tx_disable_list.append(tx_disable_data & 0x80 != 0)
|
|
|
|
else:
|
|
offset = 256
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + SFP_CHANNL_STATUS_OFFSET), SFP_CHANNL_STATUS_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
tx_disable_data = int(dom_channel_monitor_raw[0], 16)
|
|
tx_disable_list.append(tx_disable_data & 0xC0 != 0)
|
|
else:
|
|
return None
|
|
return tx_disable_list
|
|
|
|
|
|
def get_tx_disable_channel(self):
|
|
"""
|
|
Retrieves the TX disabled channels in this SFP
|
|
|
|
Returns:
|
|
A hex of 4 bits (bit 0 to bit 3 as channel 0 to channel 3) to represent
|
|
TX channels which have been disabled in this SFP.
|
|
As an example, a returned value of 0x5 indicates that channel 0
|
|
and channel 2 have been disabled.
|
|
"""
|
|
tx_disable_list = self.get_tx_disable()
|
|
if tx_disable_list is None:
|
|
return 0
|
|
tx_disabled = 0
|
|
for i in range(len(tx_disable_list)):
|
|
if tx_disable_list[i]:
|
|
tx_disabled |= 1 << i
|
|
return tx_disabled
|
|
|
|
|
|
def mgmt_phy_mod_pwr_attr_get(self, power_attr_type):
|
|
sx_mgmt_phy_mod_pwr_attr_p = new_sx_mgmt_phy_mod_pwr_attr_t_p()
|
|
sx_mgmt_phy_mod_pwr_attr = sx_mgmt_phy_mod_pwr_attr_t()
|
|
sx_mgmt_phy_mod_pwr_attr.power_attr_type = power_attr_type
|
|
sx_mgmt_phy_mod_pwr_attr_t_p_assign(sx_mgmt_phy_mod_pwr_attr_p, sx_mgmt_phy_mod_pwr_attr)
|
|
module_id_info = sx_mgmt_module_id_info_t()
|
|
module_id_info.slot_id = 0
|
|
module_id_info.module_id = self.sdk_index
|
|
try:
|
|
rc = sx_mgmt_phy_module_pwr_attr_get(self.sdk_handle, module_id_info, sx_mgmt_phy_mod_pwr_attr_p)
|
|
assert SX_STATUS_SUCCESS == rc, "sx_mgmt_phy_module_pwr_attr_get failed {}".format(rc)
|
|
sx_mgmt_phy_mod_pwr_attr = sx_mgmt_phy_mod_pwr_attr_t_p_value(sx_mgmt_phy_mod_pwr_attr_p)
|
|
pwr_mode_attr = sx_mgmt_phy_mod_pwr_attr.pwr_mode_attr
|
|
return pwr_mode_attr.admin_pwr_mode_e, pwr_mode_attr.oper_pwr_mode_e
|
|
finally:
|
|
delete_sx_mgmt_phy_mod_pwr_attr_t_p(sx_mgmt_phy_mod_pwr_attr_p)
|
|
|
|
|
|
def get_lpmode(self):
|
|
"""
|
|
Retrieves the lpmode (low power mode) status of this SFP
|
|
|
|
Returns:
|
|
A Boolean, True if lpmode is enabled, False if disabled
|
|
"""
|
|
admin_pwr_mode, oper_pwr_mode = self.mgmt_phy_mod_pwr_attr_get(SX_MGMT_PHY_MOD_PWR_ATTR_PWR_MODE_E)
|
|
|
|
return oper_pwr_mode == SX_MGMT_PHY_MOD_PWR_MODE_LOW_E
|
|
|
|
|
|
def get_power_override(self):
|
|
"""
|
|
Retrieves the power-override status of this SFP
|
|
|
|
Returns:
|
|
A Boolean, True if power-override is enabled, False if disabled
|
|
"""
|
|
if self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return False
|
|
|
|
dom_control_raw = self._read_eeprom_specific_bytes((offset + QSFP_CONTROL_OFFSET), QSFP_CONTROL_WIDTH)
|
|
if dom_control_raw is not None:
|
|
dom_control_data = sfpd_obj.parse_control_bytes(dom_control_raw, 0)
|
|
return ('On' == dom_control_data['data']['PowerOverride'])
|
|
else:
|
|
return NotImplementedError
|
|
|
|
|
|
def get_temperature(self):
|
|
"""
|
|
Retrieves the temperature of this SFP
|
|
|
|
Returns:
|
|
An integer number of current temperature in Celsius
|
|
"""
|
|
if not self.dom_supported:
|
|
return None
|
|
if self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
offset_xcvr = 128
|
|
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_temp_supported:
|
|
dom_temperature_raw = self._read_eeprom_specific_bytes((offset + QSFP_TEMPE_OFFSET), QSFP_TEMPE_WIDTH)
|
|
if dom_temperature_raw is not None:
|
|
dom_temperature_data = sfpd_obj.parse_temperature(dom_temperature_raw, 0)
|
|
temp = self._convert_string_to_num(dom_temperature_data['data']['Temperature']['value'])
|
|
return temp
|
|
else:
|
|
return None
|
|
else:
|
|
return None
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
offset = 0
|
|
|
|
sfpd_obj = qsfp_dd_Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_temp_supported:
|
|
dom_temperature_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_TEMPE_OFFSET), QSFP_DD_TEMPE_WIDTH)
|
|
if dom_temperature_raw is not None:
|
|
dom_temperature_data = sfpd_obj.parse_temperature(dom_temperature_raw, 0)
|
|
temp = self._convert_string_to_num(dom_temperature_data['data']['Temperature']['value'])
|
|
return temp
|
|
return None
|
|
|
|
else:
|
|
offset = 256
|
|
sfpd_obj = sff8472Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
sfpd_obj._calibration_type = 1
|
|
|
|
dom_temperature_raw = self._read_eeprom_specific_bytes((offset + SFP_TEMPE_OFFSET), SFP_TEMPE_WIDTH)
|
|
if dom_temperature_raw is not None:
|
|
dom_temperature_data = sfpd_obj.parse_temperature(dom_temperature_raw, 0)
|
|
temp = self._convert_string_to_num(dom_temperature_data['data']['Temperature']['value'])
|
|
return temp
|
|
else:
|
|
return None
|
|
|
|
|
|
def get_voltage(self):
|
|
"""
|
|
Retrieves the supply voltage of this SFP
|
|
|
|
Returns:
|
|
An integer number of supply voltage in mV
|
|
"""
|
|
if not self.dom_supported:
|
|
return None
|
|
if self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
offset_xcvr = 128
|
|
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_volt_supported:
|
|
dom_voltage_raw = self._read_eeprom_specific_bytes((offset + QSFP_VOLT_OFFSET), QSFP_VOLT_WIDTH)
|
|
if dom_voltage_raw is not None:
|
|
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
|
|
voltage = self._convert_string_to_num(dom_voltage_data['data']['Vcc']['value'])
|
|
return voltage
|
|
else:
|
|
return None
|
|
return None
|
|
|
|
if self.sfp_type == QSFP_DD_TYPE:
|
|
offset = 128
|
|
|
|
sfpd_obj = qsfp_dd_Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_volt_supported:
|
|
dom_voltage_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_VOLT_OFFSET), QSFP_DD_VOLT_WIDTH)
|
|
if dom_voltage_raw is not None:
|
|
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
|
|
voltage = self._convert_string_to_num(dom_voltage_data['data']['Vcc']['value'])
|
|
return voltage
|
|
return None
|
|
|
|
else:
|
|
offset = 256
|
|
|
|
sfpd_obj = sff8472Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
sfpd_obj._calibration_type = self.calibration
|
|
|
|
dom_voltage_raw = self._read_eeprom_specific_bytes((offset + SFP_VOLT_OFFSET), SFP_VOLT_WIDTH)
|
|
if dom_voltage_raw is not None:
|
|
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
|
|
voltage = self._convert_string_to_num(dom_voltage_data['data']['Vcc']['value'])
|
|
return voltage
|
|
else:
|
|
return None
|
|
|
|
|
|
def get_tx_bias(self):
|
|
"""
|
|
Retrieves the TX bias current of this SFP
|
|
|
|
Returns:
|
|
A list of four integer numbers, representing TX bias in mA
|
|
for channel 0 to channel 4.
|
|
Ex. ['110.09', '111.12', '108.21', '112.09']
|
|
"""
|
|
tx_bias_list = []
|
|
if self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
offset_xcvr = 128
|
|
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_CHANNL_MON_OFFSET), QSFP_CHANNL_MON_WITH_TX_POWER_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params_with_tx_power(dom_channel_monitor_raw, 0)
|
|
tx_bias_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TX1Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TX2Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TX3Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TX4Bias']['value']))
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
# page 11h
|
|
if self.dom_rx_tx_power_bias_supported:
|
|
offset = 512
|
|
sfpd_obj = qsfp_dd_Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if dom_tx_bias_power_supported:
|
|
dom_tx_bias_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_TX_BIAS_OFFSET), QSFP_DD_TX_BIAS_WIDTH)
|
|
if dom_tx_bias_raw is not None:
|
|
dom_tx_bias_data = sfpd_obj.parse_dom_tx_bias(dom_tx_bias_raw, 0)
|
|
tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX1Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX2Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX3Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX4Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX5Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX6Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX7Bias']['value']))
|
|
tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX8Bias']['value']))
|
|
|
|
else:
|
|
offset = 256
|
|
|
|
sfpd_obj = sff8472Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
sfpd_obj._calibration_type = self.calibration
|
|
|
|
if self.dom_supported:
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + SFP_CHANNL_MON_OFFSET), SFP_CHANNL_MON_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(dom_channel_monitor_raw, 0)
|
|
tx_bias_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TXBias']['value']))
|
|
else:
|
|
return None
|
|
else:
|
|
return None
|
|
|
|
return tx_bias_list
|
|
|
|
|
|
def get_rx_power(self):
|
|
"""
|
|
Retrieves the received optical power for this SFP
|
|
|
|
Returns:
|
|
A list of four integer numbers, representing received optical
|
|
power in mW for channel 0 to channel 4.
|
|
Ex. ['1.77', '1.71', '1.68', '1.70']
|
|
"""
|
|
rx_power_list = []
|
|
if self.sfp_type == OSFP_TYPE:
|
|
# OSFP not supported on our platform yet.
|
|
return None
|
|
|
|
elif self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
offset_xcvr = 128
|
|
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_rx_power_supported:
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_CHANNL_MON_OFFSET), QSFP_CHANNL_MON_WITH_TX_POWER_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params_with_tx_power(dom_channel_monitor_raw, 0)
|
|
rx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['RX1Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['RX2Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['RX3Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['RX4Power']['value']))
|
|
else:
|
|
return None
|
|
else:
|
|
return None
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
# page 11
|
|
if self.dom_rx_tx_power_bias_supported:
|
|
offset = 512
|
|
sfpd_obj = qsfp_dd_Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_rx_power_supported:
|
|
dom_rx_power_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_RX_POWER_OFFSET), QSFP_DD_RX_POWER_WIDTH)
|
|
if dom_rx_power_raw is not None:
|
|
dom_rx_power_data = sfpd_obj.parse_dom_rx_power(dom_rx_power_raw, 0)
|
|
rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX1Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX2Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX3Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX4Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX5Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX6Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX7Power']['value']))
|
|
rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX8Power']['value']))
|
|
|
|
else:
|
|
offset = 256
|
|
|
|
sfpd_obj = sff8472Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_supported:
|
|
sfpd_obj._calibration_type = self.calibration
|
|
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + SFP_CHANNL_MON_OFFSET), SFP_CHANNL_MON_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(dom_channel_monitor_raw, 0)
|
|
rx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['RXPower']['value']))
|
|
else:
|
|
return None
|
|
else:
|
|
return None
|
|
return rx_power_list
|
|
|
|
|
|
def get_tx_power(self):
|
|
"""
|
|
Retrieves the TX power of this SFP
|
|
|
|
Returns:
|
|
A list of four integer numbers, representing TX power in mW
|
|
for channel 0 to channel 4.
|
|
Ex. ['1.86', '1.86', '1.86', '1.86']
|
|
"""
|
|
tx_power_list = []
|
|
if self.sfp_type == OSFP_TYPE:
|
|
# OSFP not supported on our platform yet.
|
|
return None
|
|
|
|
elif self.sfp_type == QSFP_TYPE:
|
|
offset = 0
|
|
offset_xcvr = 128
|
|
|
|
sfpd_obj = sff8436Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_tx_power_supported:
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_CHANNL_MON_OFFSET), QSFP_CHANNL_MON_WITH_TX_POWER_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params_with_tx_power(dom_channel_monitor_raw, 0)
|
|
tx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TX1Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TX2Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TX3Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TX4Power']['value']))
|
|
else:
|
|
return None
|
|
else:
|
|
return None
|
|
|
|
elif self.sfp_type == QSFP_DD_TYPE:
|
|
return None
|
|
# page 11
|
|
if self.dom_rx_tx_power_bias_supported:
|
|
offset = 512
|
|
sfpd_obj = qsfp_dd_Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_tx_power_supported:
|
|
dom_tx_power_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_TX_POWER_OFFSET), QSFP_DD_TX_POWER_WIDTH)
|
|
if dom_tx_power_raw is not None:
|
|
dom_tx_power_data = sfpd_obj.parse_dom_tx_power(dom_tx_power_raw, 0)
|
|
tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX1Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX2Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX3Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX4Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX5Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX6Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX7Power']['value']))
|
|
tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX8Power']['value']))
|
|
|
|
else:
|
|
offset = 256
|
|
sfpd_obj = sff8472Dom()
|
|
if sfpd_obj is None:
|
|
return None
|
|
|
|
if self.dom_supported:
|
|
sfpd_obj._calibration_type = self.calibration
|
|
|
|
dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + SFP_CHANNL_MON_OFFSET), SFP_CHANNL_MON_WIDTH)
|
|
if dom_channel_monitor_raw is not None:
|
|
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(dom_channel_monitor_raw, 0)
|
|
tx_power_list.append(self._convert_string_to_num(dom_channel_monitor_data['data']['TXPower']['value']))
|
|
else:
|
|
return None
|
|
else:
|
|
return None
|
|
return tx_power_list
|
|
|
|
|
|
def reset(self):
|
|
"""
|
|
Reset SFP and return all user module settings to their default state.
|
|
|
|
Returns:
|
|
A boolean, True if successful, False if not
|
|
|
|
refer plugins/sfpreset.py
|
|
"""
|
|
module_id_info = sx_mgmt_module_id_info_t()
|
|
module_id_info.slot_id = 0
|
|
module_id_info.module_id = self.sdk_index
|
|
rc = sx_mgmt_phy_module_reset(self.sdk_handle, module_id_info)
|
|
if rc != SX_STATUS_SUCCESS:
|
|
logger.log_error("Error occurred when resetting SFP module {}, error code {}".format(self.sdk_index, rc))
|
|
|
|
return rc == SX_STATUS_SUCCESS
|
|
|
|
|
|
def tx_disable(self, tx_disable):
|
|
"""
|
|
Disable SFP TX for all channels
|
|
|
|
Args:
|
|
tx_disable : A Boolean, True to enable tx_disable mode, False to disable
|
|
tx_disable mode.
|
|
|
|
Returns:
|
|
A boolean, True if tx_disable is set successfully, False if not
|
|
|
|
for SFP, make use of bit 6 of byte at (offset 110, a2h (i2c addr 0x51)) to disable/enable tx
|
|
for QSFP, set all channels to disable/enable tx
|
|
"""
|
|
return NotImplementedError
|
|
|
|
|
|
def tx_disable_channel(self, channel, disable):
|
|
"""
|
|
Sets the tx_disable for specified SFP channels
|
|
|
|
Args:
|
|
channel : A hex of 4 bits (bit 0 to bit 3) which represent channel 0 to 3,
|
|
e.g. 0x5 for channel 0 and channel 2.
|
|
disable : A boolean, True to disable TX channels specified in channel,
|
|
False to enable
|
|
|
|
Returns:
|
|
A boolean, True if successful, False if not
|
|
|
|
QSFP: page a0, address 86, lower 4 bits
|
|
"""
|
|
return NotImplementedError
|
|
|
|
|
|
def is_nve(self, port):
|
|
return (port & NVE_MASK) != 0
|
|
|
|
|
|
def is_cpu(self, port):
|
|
return (port & CPU_MASK) != 0
|
|
|
|
|
|
def is_port_admin_status_up(self, log_port):
|
|
oper_state_p = new_sx_port_oper_state_t_p()
|
|
admin_state_p = new_sx_port_admin_state_t_p()
|
|
module_state_p = new_sx_port_module_state_t_p()
|
|
rc = sx_api_port_state_get(self.sdk_handle, log_port, oper_state_p, admin_state_p, module_state_p)
|
|
assert rc == SXD_STATUS_SUCCESS, "sx_api_port_state_get failed, rc = %d" % rc
|
|
|
|
admin_state = sx_port_admin_state_t_p_value(admin_state_p)
|
|
|
|
delete_sx_port_oper_state_t_p(oper_state_p)
|
|
delete_sx_port_admin_state_t_p(admin_state_p)
|
|
delete_sx_port_module_state_t_p(module_state_p)
|
|
|
|
if admin_state == SX_PORT_ADMIN_STATUS_UP:
|
|
return True
|
|
else:
|
|
return False
|
|
|
|
|
|
def set_port_admin_status_by_log_port(self, log_port, admin_status):
|
|
rc = sx_api_port_state_set(self.sdk_handle, log_port, admin_status)
|
|
if SX_STATUS_SUCCESS != rc:
|
|
logger.log_error("sx_api_port_state_set failed, rc = %d" % rc)
|
|
|
|
return SX_STATUS_SUCCESS == rc
|
|
|
|
|
|
def get_logical_ports(self):
|
|
# Get all the ports related to the sfp, if port admin status is up, put it to list
|
|
port_attributes_list = new_sx_port_attributes_t_arr(SX_PORT_ATTR_ARR_SIZE)
|
|
port_cnt_p = new_uint32_t_p()
|
|
uint32_t_p_assign(port_cnt_p, SX_PORT_ATTR_ARR_SIZE)
|
|
|
|
rc = sx_api_port_device_get(self.sdk_handle, DEVICE_ID , SWITCH_ID, port_attributes_list, port_cnt_p)
|
|
assert rc == SX_STATUS_SUCCESS, "sx_api_port_device_get failed, rc = %d" % rc
|
|
|
|
port_cnt = uint32_t_p_value(port_cnt_p)
|
|
log_port_list = []
|
|
for i in range(0, port_cnt):
|
|
port_attributes = sx_port_attributes_t_arr_getitem(port_attributes_list, i)
|
|
if not self.is_nve(int(port_attributes.log_port)) \
|
|
and not self.is_cpu(int(port_attributes.log_port)) \
|
|
and port_attributes.port_mapping.module_port == self.sdk_index \
|
|
and self.is_port_admin_status_up(port_attributes.log_port):
|
|
log_port_list.append(port_attributes.log_port)
|
|
|
|
delete_sx_port_attributes_t_arr(port_attributes_list)
|
|
delete_uint32_t_p(port_cnt_p)
|
|
return log_port_list
|
|
|
|
|
|
def mgmt_phy_mod_pwr_attr_set(self, power_attr_type, admin_pwr_mode):
|
|
result = False
|
|
sx_mgmt_phy_mod_pwr_attr = sx_mgmt_phy_mod_pwr_attr_t()
|
|
sx_mgmt_phy_mod_pwr_mode_attr = sx_mgmt_phy_mod_pwr_mode_attr_t()
|
|
sx_mgmt_phy_mod_pwr_attr.power_attr_type = power_attr_type
|
|
sx_mgmt_phy_mod_pwr_mode_attr.admin_pwr_mode_e = admin_pwr_mode
|
|
sx_mgmt_phy_mod_pwr_attr.pwr_mode_attr = sx_mgmt_phy_mod_pwr_mode_attr
|
|
sx_mgmt_phy_mod_pwr_attr_p = new_sx_mgmt_phy_mod_pwr_attr_t_p()
|
|
sx_mgmt_phy_mod_pwr_attr_t_p_assign(sx_mgmt_phy_mod_pwr_attr_p, sx_mgmt_phy_mod_pwr_attr)
|
|
module_id_info = sx_mgmt_module_id_info_t()
|
|
module_id_info.slot_id = 0
|
|
module_id_info.module_id = self.sdk_index
|
|
try:
|
|
rc = sx_mgmt_phy_module_pwr_attr_set(self.sdk_handle, SX_ACCESS_CMD_SET, module_id_info, sx_mgmt_phy_mod_pwr_attr_p)
|
|
if SX_STATUS_SUCCESS != rc:
|
|
logger.log_error("Error occurred when setting power mode for SFP module {}, error code {}".format(self.sdk_index, rc))
|
|
result = False
|
|
else:
|
|
result = True
|
|
finally:
|
|
delete_sx_mgmt_phy_mod_pwr_attr_t_p(sx_mgmt_phy_mod_pwr_attr_p)
|
|
|
|
return result
|
|
|
|
|
|
def _set_lpmode_raw(self, ports, attr_type, power_mode):
|
|
result = False
|
|
# Check if the module already works in the same mode
|
|
admin_pwr_mode, oper_pwr_mode = self.mgmt_phy_mod_pwr_attr_get(attr_type)
|
|
if (power_mode == SX_MGMT_PHY_MOD_PWR_MODE_LOW_E and oper_pwr_mode == SX_MGMT_PHY_MOD_PWR_MODE_LOW_E) \
|
|
or (power_mode == SX_MGMT_PHY_MOD_PWR_MODE_AUTO_E and admin_pwr_mode == SX_MGMT_PHY_MOD_PWR_MODE_AUTO_E):
|
|
return True
|
|
try:
|
|
# Bring the port down
|
|
for port in ports:
|
|
self.set_port_admin_status_by_log_port(port, SX_PORT_ADMIN_STATUS_DOWN)
|
|
# Set the desired power mode
|
|
result = self.mgmt_phy_mod_pwr_attr_set(attr_type, power_mode)
|
|
finally:
|
|
# Bring the port up
|
|
for port in ports:
|
|
self.set_port_admin_status_by_log_port(port, SX_PORT_ADMIN_STATUS_UP)
|
|
|
|
return result
|
|
|
|
|
|
def set_lpmode(self, lpmode):
|
|
"""
|
|
Sets the lpmode (low power mode) of SFP
|
|
|
|
Args:
|
|
lpmode: A Boolean, True to enable lpmode, False to disable it
|
|
Note : lpmode can be overridden by set_power_override
|
|
|
|
Returns:
|
|
A boolean, True if lpmode is set successfully, False if not
|
|
"""
|
|
log_port_list = self.get_logical_ports()
|
|
if lpmode:
|
|
self._set_lpmode_raw(log_port_list, SX_MGMT_PHY_MOD_PWR_ATTR_PWR_MODE_E, SX_MGMT_PHY_MOD_PWR_MODE_LOW_E)
|
|
logger.log_info("Enabled low power mode for module [%d]" % (self.sdk_index))
|
|
else:
|
|
self._set_lpmode_raw(log_port_list, SX_MGMT_PHY_MOD_PWR_ATTR_PWR_MODE_E, SX_MGMT_PHY_MOD_PWR_MODE_AUTO_E)
|
|
logger.log_info( "Disabled low power mode for module [%d]" % (self.sdk_index))
|
|
|
|
return True
|
|
|
|
|
|
def set_power_override(self, power_override, power_set):
|
|
"""
|
|
Sets SFP power level using power_override and power_set
|
|
|
|
Args:
|
|
power_override :
|
|
A Boolean, True to override set_lpmode and use power_set
|
|
to control SFP power, False to disable SFP power control
|
|
through power_override/power_set and use set_lpmode
|
|
to control SFP power.
|
|
power_set :
|
|
Only valid when power_override is True.
|
|
A Boolean, True to set SFP to low power mode, False to set
|
|
SFP to high power mode.
|
|
|
|
Returns:
|
|
A boolean, True if power-override and power_set are set successfully,
|
|
False if not
|
|
"""
|
|
return NotImplementedError
|
|
|
|
def is_replaceable(self):
|
|
"""
|
|
Indicate whether this device is replaceable.
|
|
Returns:
|
|
bool: True if it is replaceable.
|
|
"""
|
|
return True
|