ac2be9d99a
* remove nephos sonic-platform-modules-ingrasys module * [Ingrasys]Add platform drivers and device to support Debian Stretch * fix gpio init issue
1721 lines
60 KiB
Bash
Executable File
1721 lines
60 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
# Copyright (C) 2016 Ingrasys, Inc.
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
# trun on for more debug output
|
|
#DEBUG="on"
|
|
|
|
VERSION="1.1.0"
|
|
TRUE=200
|
|
FALSE=404
|
|
|
|
EXEC_FUNC=${1}
|
|
COLOR_LED=${2}
|
|
QSFP_PORT=${2}
|
|
QSFP_ACTION=${2}
|
|
MB_EEPROM_ACTION=${2}
|
|
ONOFF_LED=${3}
|
|
FAN_TRAY=${4}
|
|
|
|
############################################################
|
|
# Distributor ID: Debian
|
|
# Description: Debian GNU/Linux 8.6 (jessie)
|
|
# Release: 8.6
|
|
# Codename: jessie
|
|
# Linux debian 3.16.0-4-amd64 #1
|
|
# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux
|
|
############################################################
|
|
|
|
# Color Definition
|
|
COLOR_TITLE="\e[1;32m" ### Green ###
|
|
COLOR_WARNING="\e[1;33m" ### Yellow ###
|
|
COLOR_ERROR="\e[1;31m" ### Red ###
|
|
COLOR_END="\e[0m" ### END ###
|
|
|
|
NUM_I801_DEVICE=0
|
|
|
|
# MAIN MUX PCA9548#0 0x73
|
|
NUM_MUX_9548_0_CH0=$(( ${NUM_I801_DEVICE} + 1 )) # ucd9090 0x34
|
|
NUM_MUX_9548_0_CH1=$(( ${NUM_I801_DEVICE} + 2 )) # PCA9539 0x76 for fp LED & HW ID
|
|
NUM_MUX_9548_0_CH7=$(( ${NUM_I801_DEVICE} + 8 )) # W83795 0x2F
|
|
|
|
# FRU MUX PCA9545#1 0x72
|
|
NUM_MUX_9545_1_CH0=$(( ${NUM_I801_DEVICE} + 9 )) # PSU2 0x50
|
|
NUM_MUX_9545_1_CH1=$(( ${NUM_I801_DEVICE} + 10 )) # PSU1 0x50
|
|
NUM_MUX_9545_1_CH2=$(( ${NUM_I801_DEVICE} + 11 )) # FAN board IO exander 0x20
|
|
NUM_MUX_9545_1_CH3=$(( ${NUM_I801_DEVICE} + 12 )) # TMP75#0 0x4C TMP75#1 0x49
|
|
|
|
# HOST MUX PCA9548#2 0X70
|
|
NUM_MUX_9548_2_CH0=$(( ${NUM_I801_DEVICE} + 13 )) # PCA9548#3 0x71
|
|
NUM_MUX_9548_2_CH1=$(( ${NUM_I801_DEVICE} + 14 )) # PCA9548#4 0x71
|
|
NUM_MUX_9548_2_CH2=$(( ${NUM_I801_DEVICE} + 15 )) # PCA9548#5 0x71
|
|
NUM_MUX_9548_2_CH3=$(( ${NUM_I801_DEVICE} + 16 )) # PCA9548#6 0x71
|
|
NUM_MUX_9548_2_CH4=$(( ${NUM_I801_DEVICE} + 17 )) # PCA9535#3~6 0x20~0x23 ZQSFP ABS/INT
|
|
NUM_MUX_9548_2_CH5=$(( ${NUM_I801_DEVICE} + 18 )) # PCA9535#7~10 0x20~0x23 ZQSFP LPMODE/RST
|
|
NUM_MUX_9548_3_CH0=$(( ${NUM_I801_DEVICE} + 21 )) # QSFP 0 EEPROM
|
|
NUM_MUX_9548_4_CH0=$(( ${NUM_I801_DEVICE} + 29 )) # QSFP 8 EEPROM
|
|
NUM_MUX_9548_5_CH0=$(( ${NUM_I801_DEVICE} + 37 )) # QSFP 16 EEPROM
|
|
NUM_MUX_9548_6_CH0=$(( ${NUM_I801_DEVICE} + 45 )) # QSFP 24 EEPROM
|
|
|
|
# MUX Alias
|
|
I2C_BUS_MAIN=${NUM_I801_DEVICE}
|
|
I2C_BUS_HWM=${NUM_MUX_9548_0_CH7}
|
|
I2C_BUS_FAN_STATUS=${NUM_MUX_9545_1_CH2}
|
|
I2C_BUS_SYS_LED=${NUM_MUX_9548_0_CH1}
|
|
I2C_BUS_HW_ID=${NUM_MUX_9548_0_CH1}
|
|
I2C_BUS_BMC_HW_ID=${I2C_BUS_MAIN}
|
|
I2C_BUS_PSU_STAT=${I2C_BUS_MAIN}
|
|
I2C_BUS_FANTRAY_LED=${NUM_MUX_9545_1_CH2}
|
|
I2C_BUS_MB_EEPROM=${I2C_BUS_MAIN}
|
|
I2C_BUS_CB_EEPROM=${I2C_BUS_MAIN}
|
|
I2C_BUS_PSU1_EEPROM=${NUM_MUX_9545_1_CH1}
|
|
I2C_BUS_PSU2_EEPROM=${NUM_MUX_9545_1_CH0}
|
|
|
|
PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices"
|
|
PATH_SYS_GPIO="/sys/class/gpio"
|
|
PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon"
|
|
PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon5"
|
|
PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}"
|
|
PATH_MUX_9548_0_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH0}"
|
|
PATH_MUX_9548_0_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH1}"
|
|
PATH_MUX_9548_0_CH7="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH7}"
|
|
PATH_MUX_9545_1_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_1_CH0}"
|
|
PATH_MUX_9545_1_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_1_CH1}"
|
|
PATH_MUX_9545_1_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_1_CH2}"
|
|
PATH_MUX_9545_1_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_1_CH3}"
|
|
PATH_MUX_9548_2_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH0}"
|
|
PATH_MUX_9548_2_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH1}"
|
|
PATH_MUX_9548_2_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH2}"
|
|
PATH_MUX_9548_2_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH3}"
|
|
PATH_MUX_9548_2_CH4="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH4}"
|
|
PATH_MUX_9548_2_CH5="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH5}"
|
|
PATH_MUX_9548_3_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_3_CH0}"
|
|
PATH_MUX_9548_4_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_4_CH0}"
|
|
PATH_MUX_9548_5_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_5_CH0}"
|
|
PATH_MUX_9548_6_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_6_CH0}"
|
|
|
|
# I2C Address
|
|
### I2C MUX
|
|
I2C_ADDR_MUX_9548_0=0x73 # MAIN MUX
|
|
I2C_ADDR_MUX_9545_1=0x72 # FRU MUX
|
|
I2C_ADDR_MUX_9548_2=0x70 # HOST MUX
|
|
I2C_ADDR_MUX_9548_3=0x71 # ZQSFP MUX #1 EEPROM
|
|
I2C_ADDR_MUX_9548_4=0x71 # ZQSFP MUX #2 EEPROM
|
|
I2C_ADDR_MUX_9548_5=0x71 # ZQSFP MUX #3 EEPROM
|
|
I2C_ADDR_MUX_9548_6=0x71 # ZQSFP MUX #4 EEPROM
|
|
### GPIO Expander
|
|
I2C_ADDR_MUX_9539_0=0x76 # LED & HW ID
|
|
I2C_ADDR_MUX_9539_1=0x75 # BMC PRSNT & HWM reset
|
|
I2C_ADDR_MUX_9539_2=0x74 # SYS SEL & RST
|
|
I2C_ADDR_MUX_9535_3=0x20 # ZQSFP0~15 ABS
|
|
I2C_ADDR_MUX_9535_4=0x21 # ZQSFP16~31 ABS
|
|
I2C_ADDR_MUX_9535_5=0x22 # ZQSFP0~15 INT
|
|
I2C_ADDR_MUX_9535_6=0x23 # ZQSFP16~31 INT
|
|
I2C_ADDR_MUX_9535_7=0x20 # ZQSFP0~15 LPMODE
|
|
I2C_ADDR_MUX_9535_8=0x21 # ZQSFP16~31 LPMODE
|
|
I2C_ADDR_MUX_9535_9=0x22 # ZQSFP0~15 RST
|
|
I2C_ADDR_MUX_9535_10=0x23 # ZQSFP16~31 RST
|
|
I2C_ADDR_MUX_9535_11=0x20 # on FAN board, fan status and led config
|
|
I2C_ADDR_MUX_9555_12=0x24 # on BMC board, INT and HW ID
|
|
I2C_ADDR_MUX_9555_13=0x25 # on BMC board, PSU status
|
|
I2C_ADDR_MUX_9555_14=0x26 # on BMC board, RST and SEL
|
|
I2C_ADDR_MUX_9539_15=0x77 # on CPU board, STATUS and ERR from CPLD
|
|
### peripheral
|
|
I2C_ADDR_MB_EEPROM=0x55 # on main board
|
|
I2C_ADDR_CB_EEPROM=0x51 # on cpu board
|
|
I2C_ADDR_UCD9090=0x34
|
|
I2C_ADDR_W83795=0x2F
|
|
I2C_ADDR_PSU1_EEPROM=0x50
|
|
I2C_ADDR_PSU2_EEPROM=0x50
|
|
I2C_ADDR_TMP75_REAR=0x4C
|
|
I2C_ADDR_TMP75_FRONT=0x49
|
|
I2C_ADDR_TMP75_CB=0x4F # on cpu board
|
|
I2C_ADDR_TMP75_BB=0x4A # on bmc board
|
|
I2C_ADDR_QSFP_EEPROM=0x50
|
|
|
|
#sysfs
|
|
PATH_SYSFS_PSU1="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU1_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU1_EEPROM)"
|
|
PATH_SYSFS_PSU2="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU2_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU2_EEPROM)"
|
|
|
|
#ACTIVE LOW enable flag
|
|
ACTIVE_LOW_EN=1
|
|
ACTIVE_HIGH_EN=0
|
|
#GPIO Direction In/Out
|
|
DIR_IN=in
|
|
DIR_OUT=out
|
|
|
|
#Power Supply Status
|
|
PSU_DC_ON=1
|
|
PSU_DC_OFF=0
|
|
PSU_EXIST=1
|
|
PSU_NOT_EXIST=0
|
|
|
|
# IO expander register
|
|
# direction
|
|
REG_PORT0_DIR=6
|
|
REG_PORT1_DIR=7
|
|
# polarity
|
|
REG_PORT0_POL=4
|
|
REG_PORT1_POL=5
|
|
# output
|
|
REG_PORT0_OUT=2
|
|
REG_PORT1_OUT=3
|
|
# input
|
|
REG_PORT0_IN=0
|
|
REG_PORT1_IN=1
|
|
|
|
#ZQSFP GPIO sysfs index
|
|
ZQSFP_PORT0_ABS_GPIO_IDX=240 # 240~255
|
|
ZQSFP_PORT16_ABS_GPIO_IDX=224 # 224~239
|
|
|
|
# switch port number range
|
|
MIN_PORT_NUM=1
|
|
MAX_PORT_NUM=32
|
|
|
|
#GPIO Offset
|
|
GPIO_OFFSET=0
|
|
|
|
# Help usage function
|
|
function _help {
|
|
echo "========================================================="
|
|
echo "# Description: Help Function"
|
|
echo "# Version : ${VERSION}"
|
|
echo "========================================================="
|
|
echo "----------------------------------------------------"
|
|
echo "EX : ${0} help"
|
|
echo " : ${0} i2c_init"
|
|
echo " : ${0} i2c_deinit"
|
|
echo " : ${0} i2c_fan_speed_init"
|
|
echo " : ${0} i2c_io_exp_init"
|
|
echo " : ${0} i2c_gpio_init"
|
|
echo " : ${0} i2c_gpio_deinit"
|
|
echo " : ${0} i2c_led_test"
|
|
echo " : ${0} i2c_psu_eeprom_get"
|
|
echo " : ${0} i2c_mb_eeprom_get"
|
|
echo " : ${0} i2c_cb_eeprom_get"
|
|
echo " : ${0} i2c_eeprom_sync"
|
|
echo " : ${0} i2c_qsfp_eeprom_get [1-32]"
|
|
echo " : ${0} i2c_qsfp_eeprom_init new|delete"
|
|
echo " : ${0} i2c_mb_eeprom_init new|delete"
|
|
echo " : ${0} i2c_cb_eeprom_init new|delete"
|
|
echo " : ${0} i2c_qsfp_status_get [1-32]"
|
|
echo " : ${0} i2c_qsfp_type_get [1-32]"
|
|
echo " : ${0} i2c_board_type_get"
|
|
echo " : ${0} i2c_bmc_board_type_get"
|
|
echo " : ${0} i2c_psu_status"
|
|
echo " : ${0} i2c_led_psu_status_set"
|
|
echo " : ${0} i2c_led_fan_status_set"
|
|
echo " : ${0} i2c_led_fan_tray_status_set"
|
|
echo " : ${0} i2c_test_all"
|
|
echo " : ${0} i2c_sys_led green|amber"
|
|
echo " : ${0} i2c_fan_led green|amber on|off"
|
|
echo " : ${0} i2c_psu1_led green|amber on|off"
|
|
echo " : ${0} i2c_psu2_led green|amber on|off"
|
|
echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]"
|
|
echo "----------------------------------------------------"
|
|
}
|
|
|
|
#Pause function
|
|
function _pause {
|
|
read -p "$*"
|
|
}
|
|
|
|
#Retry command function
|
|
function _retry {
|
|
local i
|
|
for i in {1..5};
|
|
do
|
|
eval "${*}" && break || echo "retry"; sleep 1;
|
|
done
|
|
}
|
|
|
|
#I2C Init
|
|
function _i2c_init {
|
|
echo "========================================================="
|
|
echo "# Description: I2C Init"
|
|
echo "========================================================="
|
|
|
|
#rmmod i2c_ismt
|
|
_util_rmmod i2c_i801
|
|
modprobe i2c_i801 disable_features=0x10
|
|
modprobe i2c_dev
|
|
modprobe i2c_mux_pca954x force_deselect_on_exit=1
|
|
|
|
# add MUX PCA9548#0 on I801, assume to be i2c-1~8
|
|
if [ ! -e ${PATH_MUX_9548_0_CH0} ]; then
|
|
_retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_0}' > ${PATH_I801_DEVICE}/new_device"
|
|
else
|
|
echo "pca9548 ${I2C_ADDR_MUX_9548_0} already init."
|
|
fi
|
|
# add MUX PCA9545#1 on I801, assume to be i2c-9~12
|
|
if [ ! -e ${PATH_MUX_9545_1_CH0} ]; then
|
|
_retry "echo 'pca9545 ${I2C_ADDR_MUX_9545_1}' > ${PATH_I801_DEVICE}/new_device"
|
|
else
|
|
echo "pca9545 ${I2C_ADDR_MUX_9545_1} already init."
|
|
fi
|
|
# add MUX PCA9548#2 on I801, assume to be i2c-13~20
|
|
if [ ! -e ${PATH_MUX_9548_2_CH0} ]; then
|
|
_retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_2}' > ${PATH_I801_DEVICE}/new_device"
|
|
else
|
|
echo "pca9548 ${I2C_ADDR_MUX_9548_2} already init."
|
|
fi
|
|
# add MUX PCA9548#3 on PCA9548#2 CH0, assume to be i2c-21~28
|
|
if [ ! -e ${PATH_MUX_9548_3_CH0} ]; then
|
|
_retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_3}' > ${PATH_MUX_9548_2_CH0}/new_device"
|
|
else
|
|
echo "pca9548 ${I2C_ADDR_MUX_9548_3} already init."
|
|
fi
|
|
# add MUX PCA9548#4 on PCA9548#2 CH1, assume to be i2c-29~36
|
|
if [ ! -e ${PATH_MUX_9548_4_CH0} ]; then
|
|
_retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_4}' > ${PATH_MUX_9548_2_CH1}/new_device"
|
|
else
|
|
echo "pca9548 ${I2C_ADDR_MUX_9548_4} already init."
|
|
fi
|
|
# add MUX PCA9548#5 on PCA9548#2 CH2, assume to be i2c-37~44
|
|
if [ ! -e ${PATH_MUX_9548_5_CH0} ]; then
|
|
_retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_5}' > ${PATH_MUX_9548_2_CH2}/new_device"
|
|
else
|
|
echo "pca9548 ${I2C_ADDR_MUX_9548_5} already init."
|
|
fi
|
|
# add MUX PCA9548#6 on PCA9548#2 CH3, assume to be i2c-45~52
|
|
if [ ! -e ${PATH_MUX_9548_6_CH0} ]; then
|
|
_retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_6}' > ${PATH_MUX_9548_2_CH3}/new_device"
|
|
else
|
|
echo "pca9548 ${I2C_ADDR_MUX_9548_6} already init."
|
|
fi
|
|
|
|
_i2c_hwm_init
|
|
_util_rmmod eeprom
|
|
modprobe eeprom_mb
|
|
modprobe gpio-pca953x
|
|
_i2c_io_exp_init
|
|
rmmod gpio_ich
|
|
_i2c_gpio_init
|
|
modprobe gpio_ich
|
|
_i2c_sensors_init
|
|
_i2c_psu_init
|
|
|
|
# Init LED_CLR register (pull shift register out of reset), should be after io exp init
|
|
_port_led_clr_init
|
|
_i2c_qsfp_eeprom_init "new"
|
|
_i2c_mb_eeprom_init "new"
|
|
_i2c_cb_eeprom_init "new"
|
|
_i2c_fan_speed_init
|
|
_i2c_led_psu_status_set
|
|
_i2c_led_fan_status_set
|
|
|
|
# sync eeprom content
|
|
_i2c_eeprom_sync
|
|
|
|
# trun on sys led
|
|
echo "led_sys setup..."
|
|
COLOR_LED="green"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_sys_led
|
|
|
|
_config_rmem
|
|
}
|
|
|
|
#I2C Deinit
|
|
function _i2c_deinit {
|
|
echo "i2c deinit..."
|
|
_i2c_gpio_deinit
|
|
for mod in coretemp jc42 w83795 eeprom eeprom_mb gpio-pca953x i2c_mux_pca954x i2c_i801 ingrasys_s9130_32x_psu;
|
|
do
|
|
_util_rmmod $mod
|
|
done
|
|
echo "Done"
|
|
}
|
|
|
|
function _i2c_sensors_init {
|
|
echo "SENSORS init..."
|
|
local dev_path
|
|
# to make sure hwmon index in sysfs as expected,
|
|
# need to remove kernel module and then probe them in expected order
|
|
# remove all sensors kernel module
|
|
_util_rmmod coretemp
|
|
_util_rmmod jc42
|
|
_util_rmmod w83795
|
|
# probe coretemp kernel module
|
|
modprobe coretemp
|
|
# probe hwmon kernel module
|
|
modprobe w83795
|
|
# add tmp75 to sysfs
|
|
####Main board thermal
|
|
dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9545_1_CH3}-$(printf "%04x" ${I2C_ADDR_TMP75_REAR})"
|
|
if ! [ -L ${dev_path} ]; then
|
|
echo "tmp75 ${I2C_ADDR_TMP75_REAR}" > ${PATH_MUX_9545_1_CH3}/new_device # hwmon1
|
|
else
|
|
echo "${dev_path} already exist"
|
|
fi
|
|
sleep 0.5
|
|
dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9545_1_CH3}-$(printf "%04x" ${I2C_ADDR_TMP75_FRONT})"
|
|
if ! [ -L ${dev_path} ]; then
|
|
echo "tmp75 ${I2C_ADDR_TMP75_FRONT}" > ${PATH_MUX_9545_1_CH3}/new_device #hwmon2
|
|
else
|
|
echo "${dev_path} already exist"
|
|
fi
|
|
sleep 0.5
|
|
####BMC board thermal
|
|
dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH7}-$(printf "%04x" ${I2C_ADDR_TMP75_BB})"
|
|
if ! [ -L ${dev_path} ]; then
|
|
echo "tmp75 ${I2C_ADDR_TMP75_BB}" > ${PATH_MUX_9548_0_CH7}/new_device #hwmon3
|
|
else
|
|
echo "${dev_path} already exist"
|
|
fi
|
|
sleep 0.5
|
|
####CPU board thermal
|
|
dev_path="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MAIN}-$(printf "%04x" ${I2C_ADDR_TMP75_CB})"
|
|
if ! [ -L ${dev_path} ]; then
|
|
echo "tmp75 ${I2C_ADDR_TMP75_CB}" > ${PATH_I801_DEVICE}/new_device #hwmon4
|
|
else
|
|
echo "${dev_path} already exist"
|
|
fi
|
|
sleep 0.5
|
|
# add w83795 to sysfs
|
|
dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH7}-$(printf "%04x" ${I2C_ADDR_W83795})"
|
|
if ! [ -L ${dev_path} ]; then
|
|
echo "w83795adg ${I2C_ADDR_W83795}" > ${PATH_MUX_9548_0_CH7}/new_device #hwmon5
|
|
else
|
|
echo "${dev_path} already exist"
|
|
fi
|
|
sleep 0.5
|
|
|
|
# probe jc42 kernel module
|
|
modprobe jc42
|
|
|
|
echo "Done"
|
|
}
|
|
|
|
function _port_led_clr_init {
|
|
echo "port led init..."
|
|
# gpio pin on GPIO MUX PCA9539#2 I/O 0.2
|
|
# pull high to out of reset
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x04
|
|
value=0x04
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${output_reg} ${value}
|
|
echo "Done"
|
|
}
|
|
|
|
#FAN Speed Init
|
|
function _i2c_fan_speed_init {
|
|
echo -n "FAN SPEED INIT..."
|
|
if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then
|
|
# init fan speed
|
|
echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm1
|
|
echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm2
|
|
echo "SUCCESS"
|
|
else
|
|
echo "FAIL"
|
|
fi
|
|
}
|
|
|
|
# HWM init
|
|
function _i2c_hwm_init {
|
|
echo "HWM INIT..."
|
|
# select bank0
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80
|
|
# SW reset, Disable monitor
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x01 0x9C
|
|
# disable TR5/TR6 DTS
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x04 0x0
|
|
# enable FANIN1~8
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x06 0xFF
|
|
# disable FANIN9~14
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x07 0x00
|
|
# CLKIN clock frequency set as 48Mhz
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x01 0x1C
|
|
# select bank 2
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x82
|
|
# set PWM mode in FOMC
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x0F 0x00
|
|
# set 25KHz fan output frequency in F1OPFP&F2OPFP
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x18 0x84
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x19 0x84
|
|
}
|
|
|
|
#Temperature sensor Init
|
|
function _i2c_temp_init {
|
|
echo "TEMP INIT..."
|
|
# enable temp monitor on w83795
|
|
# select bank0
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80
|
|
# enable TR4 temperature monitoring
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x05 0x40
|
|
# disable TR5/TR6 DTS
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x04 0x0
|
|
echo "Done"
|
|
}
|
|
|
|
#VOLMON Init
|
|
function _i2c_volmon_init {
|
|
echo "VOLMON INIT..."
|
|
# enable voltage monitor on w83795
|
|
# VSEN1 P0V9
|
|
# VSEN2 VDD
|
|
# VSEN3 P1V2
|
|
# VSEN4 P1V8
|
|
# select bank0
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80
|
|
# enable vsen1~4, disable vsen5~8
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x02 0x0F
|
|
# enable 3VDD,VBAT
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x03 0x50
|
|
echo "Done"
|
|
}
|
|
|
|
#FANIN Init
|
|
function _i2c_fan_init {
|
|
echo "FANIN INIT..."
|
|
# enable fan monitor on w83795
|
|
# 4 fantray with 8 FANIN
|
|
# select bank0
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80
|
|
# enable FANIN1~8
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x06 0xFF
|
|
# disable FANIN9~14
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x07 0x00
|
|
|
|
# select bank 2
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x82
|
|
# set PWM mode in FOMC
|
|
_util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x0F 0x00
|
|
|
|
echo "Done"
|
|
}
|
|
|
|
#IO Expander Init
|
|
function _i2c_io_exp_init {
|
|
echo "========================================================="
|
|
echo "# Description: I2C IO Expender Init"
|
|
echo "========================================================="
|
|
|
|
# need to init BMC io expander first due to some io expander are reset default
|
|
echo "Init BMC INT & HW ID IO Expander"
|
|
# all input
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_12} ${REG_PORT0_DIR} 0xFF
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_12} ${REG_PORT1_DIR} 0xFF
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_12} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_12} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "Init BMC PSU status IO Expander"
|
|
# PWRON default 0 (ACTIVE_LOW)
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT0_OUT} 0x00
|
|
# default 0 (ACTIVE_LOW)
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT1_OUT} 0x00
|
|
# I/O 0.2 0.5 output(PWRON), rest input
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT0_DIR} 0xDB
|
|
# I/O 1.0~1.1 input, 1.2~1.4 output (1.5~1.7 not enable)
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT1_DIR} 0xE3
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "Init BMC RST and SEL IO Expander"
|
|
# RST default is 1 (ACTIVE_LOW)
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT0_OUT} 0x3F
|
|
# SEL default is 0 (HOST), EN default is 1 (ACTIVE_HIGH)
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT1_OUT} 0x1F
|
|
# I/O 0.0~0.5 output, 0.6~0.7 not use
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT0_DIR} 0xC0
|
|
# all output
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT1_DIR} 0x00
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "Init System LED & HW ID IO Expander"
|
|
# I/O_0.x for System LED default 0, I/O_1.x for HW ID
|
|
_util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_OUT} 0x00
|
|
# System LED => all output
|
|
_util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_DIR} 0x00
|
|
# HW ID => all input
|
|
_util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT1_DIR} 0xFF
|
|
_util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "Init System PRSNT and HWM RST IO Expander"
|
|
# HWM_RST_L default 1 (ACTIVE_LOW)
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT0_OUT} 0x04
|
|
# all input expect HWM_RST_L (0.2)
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT0_DIR} 0xFB
|
|
# port1 not used
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT1_DIR} 0xFF
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "Init System SEL and RST IO Expander"
|
|
# RST 0.0~0.3 default 1 (ACTIVE low), rest default 0
|
|
# SEL set to value 0 (host)
|
|
# LED_CLR also do init in _port_led_clr_init
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_OUT} 0x0F
|
|
# RST 1.6~1.7 default 1 (ACTIVE low), INT 1.0~1.4 default 1 (ACTIVE low)
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_OUT} 0xDF
|
|
# all output, but MAC_RST_L 0.0 need to set as input to prevent reboot issue
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_DIR} 0x09
|
|
# RST 1.5 !~ 1.7 output, rest are input
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_DIR} 0x1F
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "Init FAN Board Status IO Expander"
|
|
# LED_G_L set to 0, LED_Y_L set to 1 (ACTIVE_LOW)
|
|
_util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT0_OUT} 0x22
|
|
_util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT1_OUT} 0x22
|
|
# DIR/ABS is input, LED_Y/LED_G is output
|
|
_util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT0_DIR} 0xCC
|
|
_util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT1_DIR} 0xCC
|
|
_util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "Init CPU CPLD IO Expander"
|
|
# all input
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_15} ${REG_PORT0_DIR} 0xFF
|
|
# all input
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_15} ${REG_PORT1_DIR} 0xFF
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_15} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_15} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "Init ZQSFP IO Expender"
|
|
|
|
echo "set ZQSFP ABS"
|
|
#zQSFP 0-15 ABS
|
|
# all input
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_3} ${REG_PORT0_DIR} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_3} ${REG_PORT1_DIR} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_3} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_3} ${REG_PORT1_POL} 0x00
|
|
#zQSFP 16-31 ABS
|
|
# all input
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_4} ${REG_PORT0_DIR} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_4} ${REG_PORT1_DIR} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_4} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_4} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "set ZQSFP INT"
|
|
#zQSFP 0-15 INT
|
|
# all input
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_5} ${REG_PORT0_DIR} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_5} ${REG_PORT1_DIR} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_5} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_5} ${REG_PORT1_POL} 0x00
|
|
#zQSFP 16-31 INT
|
|
# all input
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_6} ${REG_PORT0_DIR} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_6} ${REG_PORT1_DIR} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_6} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_6} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "set ZQSFP LP_MODE = 0"
|
|
#ZQSFP 0-15 LP_MODE
|
|
# default is 0
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT0_OUT} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT1_OUT} 0x00
|
|
# all output
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT0_DIR} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT1_DIR} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT1_POL} 0x00
|
|
#ZQSFP 16-31 LP_MODE
|
|
# default is 0
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT0_OUT} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT1_OUT} 0x00
|
|
# all output
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT0_DIR} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT1_DIR} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT1_POL} 0x00
|
|
|
|
echo "set ZQSFP RST = 1"
|
|
#ZQSFP 0-15 RST
|
|
# default is 1 (ACTIVE_LOW)
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT0_OUT} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT1_OUT} 0xFF
|
|
# all output
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT0_DIR} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT1_DIR} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT1_POL} 0x00
|
|
#ZQSFP 16-31 RST
|
|
# default is 1 (ACTIVE_LOW)
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT0_OUT} 0xFF
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT1_OUT} 0xFF
|
|
# all output
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT0_DIR} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT1_DIR} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT0_POL} 0x00
|
|
_util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT1_POL} 0x00
|
|
|
|
}
|
|
|
|
# To set the global variable GPIO_OFFSET
|
|
function _set_gpio_offset {
|
|
GPIO_OFFSET=0
|
|
for d in `ls /sys/class/gpio/ | grep gpiochip`
|
|
do
|
|
gpiochip_no=${d##gpiochip}
|
|
if [ $gpiochip_no -gt 255 ]; then
|
|
GPIO_OFFSET=256
|
|
break
|
|
fi
|
|
done
|
|
#echo "set GPIO_OFFSET=${GPIO_OFFSET}"
|
|
}
|
|
|
|
#GPIO Init
|
|
function _i2c_gpio_init {
|
|
local i=0
|
|
local start=255
|
|
local end=255
|
|
local ch_num=16
|
|
|
|
#ABS Port 0-15
|
|
echo "pca9535 ${I2C_ADDR_MUX_9535_3}" > ${PATH_MUX_9548_2_CH4}/new_device
|
|
_set_gpio_offset
|
|
start=$[ ${start}+${GPIO_OFFSET} ]
|
|
end=$[ ${end}+${GPIO_OFFSET} ]
|
|
start=$[ ${end}-${ch_num}+1]
|
|
for (( i=$start; i<=$end; i++ ))
|
|
do
|
|
_util_gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW_EN}
|
|
done
|
|
|
|
#ABS Port 16-31
|
|
end=$[ ${start}-1]
|
|
echo "pca9535 ${I2C_ADDR_MUX_9535_4}" > ${PATH_MUX_9548_2_CH4}/new_device
|
|
start=$[ ${end}-${ch_num}+1]
|
|
for (( i=$start; i<=$end; i++ ))
|
|
do
|
|
_util_gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW_EN}
|
|
done
|
|
|
|
#INT Port 0-15
|
|
end=$[ ${start}-1]
|
|
echo "pca9535 ${I2C_ADDR_MUX_9535_5}" > ${PATH_MUX_9548_2_CH4}/new_device
|
|
start=$[ ${end}-${ch_num}+1]
|
|
for (( i=$start; i<=$end; i++ ))
|
|
do
|
|
_util_gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW_EN}
|
|
done
|
|
|
|
#INT Port 16-31
|
|
end=$[ ${start}-1]
|
|
echo "pca9535 ${I2C_ADDR_MUX_9535_6}" > ${PATH_MUX_9548_2_CH4}/new_device
|
|
start=$[ ${end}-${ch_num}+1]
|
|
for (( i=$start; i<=$end; i++ ))
|
|
do
|
|
_util_gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW_EN}
|
|
done
|
|
|
|
#LP Mode Port 0-15
|
|
end=$[ ${start}-1]
|
|
echo "pca9535 ${I2C_ADDR_MUX_9535_7}" > ${PATH_MUX_9548_2_CH5}/new_device
|
|
start=$[ ${end}-${ch_num}+1]
|
|
for (( i=$start; i<=$end; i++ ))
|
|
do
|
|
_util_gpio_export ${i} ${DIR_OUT} ${ACTIVE_HIGH_EN}
|
|
done
|
|
|
|
#LP Mode Port 16-31
|
|
end=$[ ${start}-1]
|
|
echo "pca9535 ${I2C_ADDR_MUX_9535_8}" > ${PATH_MUX_9548_2_CH5}/new_device
|
|
start=$[ ${end}-${ch_num}+1]
|
|
for (( i=$start; i<=$end; i++ ))
|
|
do
|
|
_util_gpio_export ${i} ${DIR_OUT} ${ACTIVE_HIGH_EN}
|
|
done
|
|
|
|
#RESET Port 0-15
|
|
end=$[ ${start}-1]
|
|
echo "pca9535 ${I2C_ADDR_MUX_9535_9}" > ${PATH_MUX_9548_2_CH5}/new_device
|
|
start=$[ ${end}-${ch_num}+1]
|
|
for (( i=$start; i<=$end; i++ ))
|
|
do
|
|
# need to set value to low (became ACTIVE_HIGH) to take port out of reset
|
|
_util_gpio_export ${i} ${DIR_OUT} ${ACTIVE_LOW_EN} 0
|
|
done
|
|
|
|
#RESET Port 16-31
|
|
end=$[ ${start}-1]
|
|
echo "pca9535 ${I2C_ADDR_MUX_9535_10}" > ${PATH_MUX_9548_2_CH5}/new_device
|
|
start=$[ ${end}-${ch_num}+1]
|
|
for (( i=$start; i<=$end; i++ ))
|
|
do
|
|
# need to set value to low (became ACTIVE_HIGH) to take port out of reset
|
|
_util_gpio_export ${i} ${DIR_OUT} ${ACTIVE_LOW_EN} 0
|
|
done
|
|
}
|
|
|
|
#GPIO DeInit
|
|
function _i2c_gpio_deinit {
|
|
echo ${I2C_ADDR_MUX_9535_3} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH4}/delete_device
|
|
echo ${I2C_ADDR_MUX_9535_4} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH4}/delete_device
|
|
echo ${I2C_ADDR_MUX_9535_5} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH4}/delete_device
|
|
echo ${I2C_ADDR_MUX_9535_6} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH4}/delete_device
|
|
echo ${I2C_ADDR_MUX_9535_7} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH5}/delete_device
|
|
echo ${I2C_ADDR_MUX_9535_8} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH5}/delete_device
|
|
echo ${I2C_ADDR_MUX_9535_9} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH5}/delete_device
|
|
echo ${I2C_ADDR_MUX_9535_10} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH5}/delete_device
|
|
}
|
|
|
|
#Set FAN Tray LED
|
|
function _i2c_led_fan_tray_status_set {
|
|
echo "FAN Tray Status Setup"
|
|
#FAN Status get
|
|
FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm`
|
|
FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm`
|
|
FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm`
|
|
FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm`
|
|
FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm`
|
|
FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm`
|
|
FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm`
|
|
FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm`
|
|
|
|
# check if io expander for fan tray exist
|
|
result=`i2cget -y ${I2C_BUS_FANTRAY_LED} ${I2C_ADDR_MUX_9535_11} ${REG_PORT0_IN} 2>/dev/null`
|
|
err_code=$?
|
|
if [ "$err_code" != "0" ]; then
|
|
echo "fan tray not exist!"
|
|
return
|
|
fi
|
|
|
|
if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ]; then
|
|
FAN_TRAY=1
|
|
echo "FAN_TRAY${FAN_TRAY}..."
|
|
COLOR_LED="green"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
else
|
|
FAN_TRAY=1
|
|
echo "FAN_TRAY${FAN_TRAY}..."
|
|
COLOR_LED="green"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
fi
|
|
|
|
if [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ]; then
|
|
FAN_TRAY=2
|
|
echo "FAN_TRAY${FAN_TRAY}..."
|
|
COLOR_LED="green"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
else
|
|
FAN_TRAY=2
|
|
echo "FAN_TRAY${FAN_TRAY}..."
|
|
COLOR_LED="green"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
fi
|
|
|
|
if [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ]; then
|
|
FAN_TRAY=3
|
|
echo "FAN_TRAY${FAN_TRAY}..."
|
|
COLOR_LED="green"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
else
|
|
FAN_TRAY=3
|
|
echo "FAN_TRAY${FAN_TRAY}..."
|
|
COLOR_LED="green"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
fi
|
|
|
|
if [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then
|
|
FAN_TRAY=4
|
|
echo "FAN_TRAY${FAN_TRAY}..."
|
|
COLOR_LED="green"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
else
|
|
FAN_TRAY=4
|
|
echo "FAN_TRAY${FAN_TRAY}..."
|
|
COLOR_LED="green"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_tray_led
|
|
fi
|
|
}
|
|
|
|
#Set FAN LED
|
|
function _i2c_led_fan_status_set {
|
|
echo "FAN Status Setup"
|
|
#PSU Status set
|
|
FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm`
|
|
FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm`
|
|
FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm`
|
|
FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm`
|
|
FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm`
|
|
FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm`
|
|
FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm`
|
|
FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm`
|
|
|
|
echo "led_fan setup..."
|
|
# all fan ok
|
|
if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ] \
|
|
&& [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ] \
|
|
&& [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ] \
|
|
&& [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then
|
|
COLOR_LED="green"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_led
|
|
# all fan fail
|
|
elif [ "${FAN1_ALARM}" == "1" ] && [ "${FAN2_ALARM}" == "1" ] \
|
|
&& [ "${FAN3_ALARM}" == "1" ] && [ "${FAN4_ALARM}" == "1" ] \
|
|
&& [ "${FAN5_ALARM}" == "1" ] && [ "${FAN6_ALARM}" == "1" ] \
|
|
&& [ "${FAN7_ALARM}" == "1" ] && [ "${FAN8_ALARM}" == "1" ]; then
|
|
COLOR_LED="green"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_led
|
|
# partial fan fail
|
|
else
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_fan_led
|
|
fi
|
|
}
|
|
|
|
#Set Power Supply LED
|
|
function _i2c_led_psu_status_set {
|
|
echo "PSU LED Status Setup"
|
|
|
|
#PSU Status set
|
|
_i2c_psu_status
|
|
|
|
#PSU1 Status
|
|
echo "led_psu1 setup..."
|
|
if [ "${psu1Exist}" == ${PSU_EXIST} ]; then
|
|
if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then
|
|
COLOR_LED="green"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_psu1_led
|
|
else
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_psu1_led
|
|
fi
|
|
else
|
|
COLOR_LED="green"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_psu1_led
|
|
fi
|
|
|
|
#PSU2 Status
|
|
echo "led_psu2 setup..."
|
|
if [ "${psu2Exist}" == ${PSU_EXIST} ]; then
|
|
if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then
|
|
COLOR_LED="green"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_psu2_led
|
|
else
|
|
COLOR_LED="amber"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_psu2_led
|
|
fi
|
|
else
|
|
COLOR_LED="green"
|
|
ONOFF_LED="off"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_psu2_led
|
|
fi
|
|
}
|
|
|
|
#LED Test
|
|
function _i2c_led_test {
|
|
echo "========================================================="
|
|
echo "# Description: I2C SYSTEM LED TEST..."
|
|
echo "========================================================="
|
|
local output_reg=${REG_PORT0_OUT}
|
|
local mask=0xFF
|
|
local value=0xFF
|
|
|
|
#sys led (green)
|
|
# set sys_led_g (0.7) = 1
|
|
mask=0x80
|
|
value=0x80
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
_pause 'Check SYS LED green light and Press [Enter] key to continue...'
|
|
#sys led (amber)
|
|
# set sys_led_g (0.7) = 0
|
|
mask=0x80
|
|
value=0x00
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
_pause 'Check SYS LED amber light and Press [Enter] key to continue...'
|
|
|
|
#FAN led (green)
|
|
# set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 0
|
|
mask=0x60
|
|
value=0x40
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
_pause 'Check FAN LED green light and Press [Enter] key to continue...'
|
|
#FAN led (amber)
|
|
# set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 1
|
|
mask=0x60
|
|
value=0x60
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
_pause 'Check FAN LED amber light and Press [Enter] key to continue...'
|
|
|
|
#PSU1 led (green)
|
|
# set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 0
|
|
mask=0x18
|
|
value=0x10
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
_pause 'Check PSU1 LED green light and Press [Enter] key to continue...'
|
|
#PSU1 led (amber)
|
|
# set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 1
|
|
mask=0x18
|
|
value=0x18
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
_pause 'Check PSU1 LED amber light and Press [Enter] key to continue...'
|
|
|
|
#PSU2 led (green)
|
|
# set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 0
|
|
mask=0x06
|
|
value=0x04
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
_pause 'Check PSU2 LED green light and Press [Enter] key to continue...'
|
|
#PSU2 led (amber)
|
|
# set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 1
|
|
mask=0x06
|
|
value=0x06
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
_pause 'Check PSU2 LED amber light and Press [Enter] key to continue...'
|
|
|
|
#Turn OFF All LED (can't trun off system led)
|
|
# set set fan_led_en (0.6), psu1_pwr_ok_oe (0.4), psu0_pwr_ok_oe (0.2) = 0
|
|
mask=0x54
|
|
value=0x00
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
_pause 'Check turn off all LEDs (exclude SYS LED) and Press [Enter] key to continue...'
|
|
|
|
# restore sys led
|
|
COLOR_LED="green"
|
|
ONOFF_LED="on"
|
|
echo "${COLOR_LED} ${ONOFF_LED}"
|
|
_i2c_sys_led
|
|
|
|
echo "Done"
|
|
}
|
|
|
|
#Set QSFP Port variable
|
|
function _qsfp_port_i2c_var_set {
|
|
local port=$1
|
|
case ${port} in
|
|
1|2|3|4|5|6|7|8)
|
|
i2cbus=${NUM_MUX_9548_2_CH4}
|
|
eeprombusbase=${NUM_MUX_9548_3_CH0}
|
|
gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT0_ABS_GPIO_IDX}))
|
|
#gpioBase=${ZQSFP_PORT0_ABS_GPIO_IDX}
|
|
;;
|
|
9|10|11|12|13|14|15|16)
|
|
i2cbus=${NUM_MUX_9548_2_CH4}
|
|
eeprombusbase=${NUM_MUX_9548_4_CH0}
|
|
gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT0_ABS_GPIO_IDX}))
|
|
#gpioBase=${ZQSFP_PORT0_ABS_GPIO_IDX}
|
|
;;
|
|
17|18|19|20|21|22|23|24)
|
|
i2cbus=${NUM_MUX_9548_2_CH4}
|
|
eeprombusbase=${NUM_MUX_9548_5_CH0}
|
|
gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT16_ABS_GPIO_IDX}))
|
|
#gpioBase=${ZQSFP_PORT16_ABS_GPIO_IDX}
|
|
;;
|
|
25|26|27|28|29|30|31|32)
|
|
i2cbus=${NUM_MUX_9548_2_CH4}
|
|
eeprombusbase=${NUM_MUX_9548_6_CH0}
|
|
gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT16_ABS_GPIO_IDX}))
|
|
#gpioBase=${ZQSFP_PORT16_ABS_GPIO_IDX}
|
|
;;
|
|
*)
|
|
echo "Please input 1~32"
|
|
exit
|
|
;;
|
|
esac
|
|
}
|
|
|
|
#Set QSFP Port variable
|
|
function _qsfp_eeprom_var_set {
|
|
local port=$1
|
|
# port 1 => zqsfp0
|
|
# port 2 => zqsfp1
|
|
# ...
|
|
eeprombusidx=$(( (${port} - 1) % 8))
|
|
eeprombus=$(( ${eeprombusbase} + ${eeprombusidx} ))
|
|
eepromAddr=${I2C_ADDR_QSFP_EEPROM}
|
|
}
|
|
|
|
#Get QSFP EEPROM Information
|
|
function _i2c_qsfp_eeprom_get {
|
|
|
|
# input parameter validation
|
|
_util_input_check "${QSFP_PORT}" "${MIN_PORT_NUM}" "${MAX_PORT_NUM}"
|
|
|
|
_util_get_qsfp_abs
|
|
|
|
if [ $status = 0 ]; then
|
|
exit
|
|
fi
|
|
|
|
_qsfp_eeprom_var_set ${QSFP_PORT}
|
|
|
|
cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C
|
|
}
|
|
|
|
#Init QSFP EEPROM
|
|
function _i2c_qsfp_eeprom_init {
|
|
echo "QSFP EEPROM INIT..."
|
|
|
|
#Action check
|
|
action=$1
|
|
if [ -z "${action}" ]; then
|
|
echo "No action, skip"
|
|
return
|
|
elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then
|
|
echo "Error action, skip"
|
|
return
|
|
fi
|
|
|
|
#Init 1-32 ports EEPROM
|
|
local i
|
|
for i in {1..32};
|
|
do
|
|
_qsfp_port_i2c_var_set ${i}
|
|
|
|
_qsfp_eeprom_var_set ${i}
|
|
|
|
if [ "${action}" == "new" ] && \
|
|
! [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then
|
|
echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/new_device
|
|
elif [ "${action}" == "delete" ] && \
|
|
[ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then
|
|
echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/delete_device
|
|
fi
|
|
done
|
|
echo "Done"
|
|
}
|
|
|
|
#Init Main Board EEPROM
|
|
function _i2c_mb_eeprom_init {
|
|
echo -n "Main Board EEPROM INIT..."
|
|
|
|
#Action check
|
|
action=$1
|
|
if [ -z "${action}" ]; then
|
|
echo "No action, skip"
|
|
return
|
|
elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then
|
|
echo "Error action, skip"
|
|
return
|
|
fi
|
|
|
|
#Init mb EEPROM
|
|
if [ "${action}" == "new" ] && \
|
|
! [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then
|
|
echo "mb_eeprom ${I2C_ADDR_MB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/new_device
|
|
elif [ "${action}" == "delete" ] && \
|
|
[ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then
|
|
echo "$I2C_ADDR_MB_EEPROM" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/delete_device
|
|
fi
|
|
echo "Done"
|
|
}
|
|
|
|
#Init CPU Board EEPROM
|
|
function _i2c_cb_eeprom_init {
|
|
echo -n "CPU Board EEPROM INIT..."
|
|
|
|
#Action check
|
|
action=$1
|
|
if [ -z "${action}" ]; then
|
|
echo "No action, skip"
|
|
return
|
|
elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then
|
|
echo "Error action, skip"
|
|
return
|
|
fi
|
|
|
|
#Init cpu EEPROM
|
|
if [ "${action}" == "new" ] && \
|
|
! [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM) ]; then
|
|
echo "mb_eeprom ${I2C_ADDR_CB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CB_EEPROM}/new_device
|
|
elif [ "${action}" == "delete" ] && \
|
|
[ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM) ]; then
|
|
echo "$I2C_ADDR_CB_EEPROM" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CB_EEPROM}/delete_device
|
|
fi
|
|
echo "Done"
|
|
}
|
|
|
|
|
|
#get QSFP Status
|
|
function _i2c_qsfp_status_get {
|
|
|
|
# input parameter validation
|
|
_util_input_check "${QSFP_PORT}" "${MIN_PORT_NUM}" "${MAX_PORT_NUM}"
|
|
|
|
local stat
|
|
_util_get_qsfp_abs
|
|
echo "status=$status"
|
|
}
|
|
|
|
#get QSFP Type
|
|
function _i2c_qsfp_type_get {
|
|
|
|
# input parameter validation
|
|
_util_input_check "${QSFP_PORT}" "${MIN_PORT_NUM}" "${MAX_PORT_NUM}"
|
|
|
|
_qsfp_port_i2c_var_set ${QSFP_PORT}
|
|
|
|
_qsfp_eeprom_var_set ${QSFP_PORT}
|
|
|
|
#Get QSFP EEPROM info
|
|
qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom)
|
|
|
|
identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"')
|
|
connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"')
|
|
transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"')
|
|
|
|
echo "identifier=$identifier"
|
|
echo "connector=$connector"
|
|
echo "transceiver=$transceiver"
|
|
}
|
|
|
|
#Init PSU Kernel Module
|
|
function _i2c_psu_init {
|
|
echo "========================================================="
|
|
echo "# Description: I2C PSU Init"
|
|
echo "========================================================="
|
|
modprobe ingrasys_s9130_32x_psu
|
|
|
|
echo "psu1 ${I2C_ADDR_PSU1_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU1_EEPROM}/new_device
|
|
echo "psu2 ${I2C_ADDR_PSU2_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU2_EEPROM}/new_device
|
|
}
|
|
|
|
#Get PSU EEPROM Information
|
|
function _i2c_psu_eeprom_get {
|
|
local eeprom_psu1=""
|
|
local eeprom_psu2=""
|
|
|
|
echo "========================================================="
|
|
echo "# Description: I2C PSU EEPROM Get..."
|
|
echo "========================================================="
|
|
|
|
eeprom_psu1="${PATH_SYSFS_PSU1}/psu_eeprom"
|
|
cat ${eeprom_psu1} | hexdump -C
|
|
|
|
eeprom_psu2="${PATH_SYSFS_PSU2}/psu_eeprom"
|
|
cat ${eeprom_psu2} | hexdump -C
|
|
}
|
|
|
|
#Get Main Board EEPROM Information
|
|
function _i2c_mb_eeprom_get {
|
|
echo "========================================================="
|
|
echo "# Description: I2C MB EEPROM Get..."
|
|
echo "========================================================="
|
|
_i2c_sys_eeprom_get mb
|
|
}
|
|
|
|
#Get CPU Board EEPROM Information
|
|
function _i2c_cb_eeprom_get {
|
|
echo "========================================================="
|
|
echo "# Description: I2C CB EEPROM Get..."
|
|
echo "========================================================="
|
|
_i2c_sys_eeprom_get cb
|
|
}
|
|
|
|
#Get system EEPROM Information
|
|
##input: "cb" for cpu board, "mb" for main board
|
|
function _i2c_sys_eeprom_get {
|
|
local eeprom_dev
|
|
|
|
if [ "$1" == "cb" ]; then
|
|
eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM)/eeprom"
|
|
elif [ "$1" == "mb" ]; then
|
|
eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM)/eeprom"
|
|
else
|
|
echo "wrong eeprom type"
|
|
return
|
|
fi
|
|
|
|
# check if eeprom device exist in sysfs
|
|
if [ ! -f ${eeprom_dev} ]; then
|
|
echo "eeprom device not init"
|
|
return
|
|
fi
|
|
|
|
cat ${eeprom_dev} | hexdump -C
|
|
echo "Done"
|
|
}
|
|
|
|
#sync eeprom content between mb and cb eeprom
|
|
function _i2c_eeprom_sync {
|
|
echo "========================================================="
|
|
echo "# Description: EEPROM sync..."
|
|
echo "========================================================="
|
|
|
|
local mb_eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM)/eeprom"
|
|
local cb_eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM)/eeprom"
|
|
|
|
# check if eeprom device exist in sysfs
|
|
if [[ ! -f ${mb_eeprom_dev} || ! -f ${cb_eeprom_dev} ]]; then
|
|
echo "eeprom device not init"
|
|
return
|
|
fi
|
|
|
|
## check if MB eeprom is empty
|
|
if [ ! -z "$(cat ${mb_eeprom_dev} | hexdump -n2 | grep ffff)" ]; then
|
|
echo "copy cb eeprom to mb eeprom..."
|
|
cat ${cb_eeprom_dev} > ${mb_eeprom_dev}
|
|
else
|
|
echo "no need to sync"
|
|
fi
|
|
|
|
echo "Done"
|
|
}
|
|
|
|
#Set System Status LED
|
|
function _i2c_sys_led {
|
|
# only green/amber, on/off can't control
|
|
if [ "${COLOR_LED}" == "green" ]; then
|
|
# set sys_led_g (0.7) = 1
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x80
|
|
value=0x80
|
|
elif [ "${COLOR_LED}" == "amber" ]; then
|
|
# set sys_led_g (0.7) = 0
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x80
|
|
value=0x00
|
|
else
|
|
echo "Invalid Parameters, Exit!!!"
|
|
_help
|
|
exit ${FALSE}
|
|
fi
|
|
|
|
#apply to io expander
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
echo "Done"
|
|
}
|
|
|
|
#Set FAN LED
|
|
function _i2c_fan_led {
|
|
if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then
|
|
# set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 0
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x60
|
|
value=0x40
|
|
elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then
|
|
# set fan_led_en (0.6) = 0 & fan_led_y (0.5) = 0
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x60
|
|
value=0x00
|
|
elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then
|
|
# set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 1
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x60
|
|
value=0x60
|
|
elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then
|
|
# set fan_led_en (0.6) = 0 & fan_led_y (0.5) = 1
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x60
|
|
value=0x20
|
|
else
|
|
echo "Invalid Parameters, Exit!!!"
|
|
_help
|
|
exit ${FALSE}
|
|
fi
|
|
|
|
#apply to io expander
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
echo "Done"
|
|
}
|
|
|
|
#Set PSU1 LED
|
|
function _i2c_psu1_led {
|
|
if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then
|
|
# set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 0
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x18
|
|
value=0x10
|
|
elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then
|
|
# set psu1_pwr_ok_oe (0.4) = 0 & psu1_led_y (0.3) = 0
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x18
|
|
value=0x00
|
|
elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then
|
|
# set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 1
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x18
|
|
value=0x18
|
|
elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then
|
|
# set psu1_pwr_ok_oe (0.4) = 0 & psu1_led_y (0.3) = 1
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x18
|
|
value=0x08
|
|
else
|
|
echo "Invalid Parameters, Exit!!!"
|
|
_help
|
|
exit ${FALSE}
|
|
fi
|
|
|
|
#apply to io expander
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
echo "Done"
|
|
}
|
|
|
|
#Set PSU2 LED
|
|
function _i2c_psu2_led {
|
|
if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then
|
|
# set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 0
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x06
|
|
value=0x04
|
|
elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then
|
|
# set psu0_pwr_ok_oe (0.2) = 0 & psu0_led_y (0.1) = 0
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x06
|
|
value=0x00
|
|
elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then
|
|
# set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 1
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x06
|
|
value=0x06
|
|
elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then
|
|
# set psu0_pwr_ok_oe (0.2) = 0 & psu0_led_y (0.1) = 1
|
|
output_reg=${REG_PORT0_OUT}
|
|
mask=0x06
|
|
value=0x02
|
|
else
|
|
echo "Invalid Parameters, Exit!!!"
|
|
_help
|
|
exit ${FALSE}
|
|
fi
|
|
|
|
#apply to io expander
|
|
_util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value}
|
|
echo "Done"
|
|
}
|
|
|
|
#Set FAN Tray LED
|
|
function _i2c_fan_tray_led {
|
|
|
|
i2cAddr=${I2C_ADDR_MUX_9535_11}
|
|
output_reg=${REG_PORT0_OUT}
|
|
|
|
case ${FAN_TRAY} in
|
|
4)
|
|
output_reg=${REG_PORT0_OUT}
|
|
if [ "${COLOR_LED}" == "green" ]; then
|
|
mask=0x01
|
|
elif [ "${COLOR_LED}" == "amber" ]; then
|
|
mask=0x02
|
|
fi
|
|
;;
|
|
3)
|
|
output_reg=${REG_PORT0_OUT}
|
|
if [ "${COLOR_LED}" == "green" ]; then
|
|
mask=0x10
|
|
elif [ "${COLOR_LED}" == "amber" ]; then
|
|
mask=0x20
|
|
fi
|
|
;;
|
|
2)
|
|
output_reg=${REG_PORT1_OUT}
|
|
if [ "${COLOR_LED}" == "green" ]; then
|
|
mask=0x01
|
|
elif [ "${COLOR_LED}" == "amber" ]; then
|
|
mask=0x02
|
|
fi
|
|
;;
|
|
1)
|
|
output_reg=${REG_PORT1_OUT}
|
|
if [ "${COLOR_LED}" == "green" ]; then
|
|
mask=0x10
|
|
elif [ "${COLOR_LED}" == "amber" ]; then
|
|
mask=0x20
|
|
fi
|
|
;;
|
|
*)
|
|
echo "Please input 1~4"
|
|
exit
|
|
;;
|
|
esac
|
|
|
|
if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then
|
|
_util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x00
|
|
elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then
|
|
_util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x33
|
|
elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then
|
|
_util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x00
|
|
elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then
|
|
_util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x33
|
|
else
|
|
echo "Invalid Parameters, Exit!!!"
|
|
_help
|
|
exit ${FALSE}
|
|
fi
|
|
|
|
echo "Done"
|
|
}
|
|
|
|
#Get Board Version and Type
|
|
function _i2c_board_type_get {
|
|
# read input port 1 value from io expander
|
|
input_reg=${REG_PORT1_IN}
|
|
boardType=`i2cget -y ${I2C_BUS_HW_ID} ${I2C_ADDR_MUX_9539_0} ${input_reg}`
|
|
boardBuildRev=$((($boardType) & 0x03))
|
|
boardHwRev=$((($boardType) >> 2 & 0x03))
|
|
boardId=$((($boardType) >> 4))
|
|
printf "MAIN_BOARD BOARD_ID is 0x%02x, HW Rev %d, Build Rev %d\n" $boardId $boardHwRev $boardBuildRev
|
|
}
|
|
|
|
#Get BMC Board Version and Type
|
|
function _i2c_bmc_board_type_get {
|
|
# read input port 1 value from io expander
|
|
input_reg=${REG_PORT1_IN}
|
|
boardType=`i2cget -y ${I2C_BUS_BMC_HW_ID} ${I2C_ADDR_MUX_9555_12} ${input_reg}`
|
|
boardBuildRev=$((($boardType) & 0x03))
|
|
boardHwRev=$((($boardType) >> 2 & 0x03))
|
|
boardId=$((($boardType) >> 4))
|
|
printf "BMC_BOARD BOARD_ID is 0x%02x, HW Rev %d, Build Rev %d\n" $boardId $boardHwRev $boardBuildRev
|
|
}
|
|
|
|
#Get PSU Status
|
|
function _i2c_psu_status {
|
|
local psu_abs=""
|
|
|
|
psu1PwGood=`cat ${PATH_SYSFS_PSU1}/psu_pg`
|
|
psu_abs=`cat ${PATH_SYSFS_PSU1}/psu_abs`
|
|
if [ "$psu_abs" == "0" ]; then
|
|
psu1Exist=1
|
|
else
|
|
psu1Exist=0
|
|
fi
|
|
|
|
psu2PwGood=`cat ${PATH_SYSFS_PSU2}/psu_pg`
|
|
psu_abs=`cat ${PATH_SYSFS_PSU2}/psu_abs`
|
|
if [ "$psu_abs" == "0" ]; then
|
|
psu2Exist=1
|
|
else
|
|
psu2Exist=0
|
|
fi
|
|
|
|
printf "PSU1 Exist:%x PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood
|
|
printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood
|
|
}
|
|
|
|
#util functions
|
|
function _util_i2cset {
|
|
if [ "$DEBUG" == "on" ]; then
|
|
i2cset $@
|
|
else
|
|
i2cset $@ 1>/dev/null
|
|
fi
|
|
}
|
|
|
|
function _util_rmmod {
|
|
local mod=$1
|
|
[ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod
|
|
}
|
|
|
|
# get qsfp presence
|
|
function _util_get_qsfp_abs {
|
|
_qsfp_port_i2c_var_set ${QSFP_PORT}
|
|
|
|
#status: 0 -> Down, 1 -> Up (ACTIVE_LOW_EN)
|
|
status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1) % 16 )) ))/value`
|
|
}
|
|
|
|
# gpio init util function
|
|
function _util_gpio_export {
|
|
local gpio_n=$1
|
|
local direction=$2
|
|
local active_low=$3
|
|
local value=$4
|
|
|
|
if [ -z "${gpio_n}" ]; then
|
|
echo "[gpio_init] gpio_n(${gpio_n}) is not provided"
|
|
return
|
|
fi
|
|
if [[ ${gpio_n} < 0 || ${gpio_n} > $(( 255+${GPIO_OFFSET} )) ]]; then
|
|
echo "[gpio_init] gpio_n(${gpio_n}) is invalid value"
|
|
return
|
|
fi
|
|
|
|
#export gpio
|
|
echo ${gpio_n} > /sys/class/gpio/export
|
|
#set gpio direction
|
|
echo ${direction} > /sys/class/gpio/gpio${gpio_n}/direction
|
|
#set gpio active_low
|
|
echo ${active_low} > /sys/class/gpio/gpio${gpio_n}/active_low
|
|
#set value
|
|
if [ ! -z "${value}" ]; then
|
|
echo ${value} > /sys/class/gpio/gpio${gpio_n}/value
|
|
fi
|
|
}
|
|
|
|
# valid input number
|
|
function _util_input_check {
|
|
# input parameter validation
|
|
if [[ $1 -lt $2 || $1 -gt $3 ]]; then
|
|
echo "Please input number $2~$3"
|
|
exit
|
|
fi
|
|
}
|
|
|
|
#Increase read socket buffer for CoPP Test
|
|
function _config_rmem {
|
|
echo "109430400" > /proc/sys/net/core/rmem_max
|
|
}
|
|
|
|
#Main Function
|
|
function _main {
|
|
tart_time_str=`date`
|
|
start_time_sec=$(date +%s)
|
|
|
|
_set_gpio_offset
|
|
if [ "${EXEC_FUNC}" == "help" ]; then
|
|
_help
|
|
elif [ "${EXEC_FUNC}" == "i2c_init" ]; then
|
|
_i2c_init
|
|
elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then
|
|
_i2c_deinit
|
|
elif [ "${EXEC_FUNC}" == "i2c_fan_speed_init" ]; then
|
|
_i2c_fan_speed_init
|
|
elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then
|
|
_i2c_io_exp_init
|
|
elif [ "${EXEC_FUNC}" == "i2c_gpio_init" ]; then
|
|
_i2c_gpio_init
|
|
elif [ "${EXEC_FUNC}" == "i2c_gpio_deinit" ]; then
|
|
_i2c_gpio_deinit
|
|
elif [ "${EXEC_FUNC}" == "i2c_led_test" ]; then
|
|
_i2c_led_test
|
|
elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then
|
|
_i2c_mb_eeprom_get
|
|
elif [ "${EXEC_FUNC}" == "i2c_cb_eeprom_get" ]; then
|
|
_i2c_cb_eeprom_get
|
|
elif [ "${EXEC_FUNC}" == "i2c_eeprom_sync" ]; then
|
|
_i2c_eeprom_sync
|
|
elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then
|
|
_i2c_psu_eeprom_get
|
|
elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then
|
|
_i2c_qsfp_eeprom_get
|
|
elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_init" ]; then
|
|
_i2c_qsfp_eeprom_init ${QSFP_ACTION}
|
|
elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_init" ]; then
|
|
_i2c_mb_eeprom_init ${MB_EEPROM_ACTION}
|
|
elif [ "${EXEC_FUNC}" == "i2c_cb_eeprom_init" ]; then
|
|
_i2c_cb_eeprom_init ${MB_EEPROM_ACTION}
|
|
elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then
|
|
_i2c_qsfp_status_get
|
|
elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then
|
|
_i2c_qsfp_type_get
|
|
elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then
|
|
_i2c_led_psu_status_set
|
|
elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then
|
|
_i2c_led_fan_status_set
|
|
elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then
|
|
_i2c_led_fan_tray_status_set
|
|
elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then
|
|
_i2c_sys_led
|
|
elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then
|
|
_i2c_fan_led
|
|
elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then
|
|
_i2c_fan_tray_led
|
|
elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then
|
|
_i2c_psu1_led
|
|
elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then
|
|
_i2c_psu2_led
|
|
elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then
|
|
_i2c_board_type_get
|
|
elif [ "${EXEC_FUNC}" == "i2c_bmc_board_type_get" ]; then
|
|
_i2c_bmc_board_type_get
|
|
elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then
|
|
_i2c_psu_status
|
|
elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then
|
|
_i2c_init
|
|
_i2c_led_test
|
|
_i2c_psu_eeprom_get
|
|
_i2c_mb_eeprom_get
|
|
_i2c_cb_eeprom_get
|
|
_i2c_board_type_get
|
|
_i2c_bmc_board_type_get
|
|
_i2c_psu_status
|
|
else
|
|
echo "Invalid Parameters, Exit!!!"
|
|
_help
|
|
exit ${FALSE}
|
|
fi
|
|
|
|
if [ "$DEBUG" == "on" ]; then
|
|
echo "-----------------------------------------------------"
|
|
end_time_str=`date`
|
|
end_time_sec=$(date +%s)
|
|
diff_time=$[ ${end_time_sec} - ${start_time_sec} ]
|
|
echo "Start Time: ${start_time_str} (${start_time_sec})"
|
|
echo "End Time : ${end_time_str} (${end_time_sec})"
|
|
echo "Total Execution Time: ${diff_time} sec"
|
|
|
|
echo "done!!!"
|
|
fi
|
|
}
|
|
|
|
_main
|