sonic-buildimage/device/mellanox/x86_64-mlnx_msn3700-r0/sensors_swb_respin.conf
Kebo Liu 1b5f72127a
[Mellanox] Remove SFP sensors from sensors.conf (#17631)
- Why I did it
The cable thermal sensors will be deprecated from the kernel driver. When cable host management is enabled, NOS will fetch the cable temperature from cable EEPROM, kernel driver will not provide the sysfs anymore.

- How I did it
Remove the relevant sensor form the conf files

- How to verify it
Run sonic mgmt sensor test

Signed-off-by: Kebo Liu <kebol@nvidia.com>
2024-02-12 16:12:57 +02:00

236 lines
8.1 KiB
Plaintext

##
## Copyright (c) 2022 NVIDIA CORPORATION & AFFILIATES.
## Apache-2.0
##
## Licensed under the Apache License, Version 2.0 (the "License");
## you may not use this file except in compliance with the License.
## You may obtain a copy of the License at
##
## http://www.apache.org/licenses/LICENSE-2.0
##
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.
##
# Temperature sensors
bus "i2c-2" "i2c-1-mux (chan_id 1)"
chip "mlxsw-i2c-*-48"
label temp1 "Ambient ASIC Temp"
ignore temp2
ignore temp3
ignore temp4
ignore temp5
ignore temp6
ignore temp7
ignore temp8
ignore temp9
ignore temp10
ignore temp11
ignore temp12
ignore temp13
ignore temp14
ignore temp15
ignore temp16
ignore temp17
ignore temp18
ignore temp19
ignore temp20
ignore temp21
ignore temp22
ignore temp23
ignore temp24
ignore temp25
ignore temp26
ignore temp27
ignore temp28
ignore temp29
ignore temp30
ignore temp31
ignore temp32
ignore temp33
bus "i2c-7" "i2c-1-mux (chan_id 6)"
chip "tmp102-i2c-*-49"
label temp1 "Ambient Fan Side Temp (air intake)"
chip "tmp102-i2c-*-4a"
label temp1 "Ambient Port Side Temp (air exhaust)"
chip "adt75-i2c-*-4a"
label temp1 "Ambient Port Side Temp (air exhaust)"
bus "i2c-15" "i2c-1-mux (chan_id 6)"
chip "tmp102-i2c-15-49"
label temp1 "Ambient COMEX Temp"
# Power controllers
bus "i2c-5" "i2c-1-mux (chan_id 4)"
chip "tps53679-i2c-*-70"
label in1 "PMIC-1 PSU 12V Rail (in1)"
label in2 "PMIC-1 PSU 12V Rail (in2)"
label in3 "PMIC-1 ASIC 0.8V VCORE Rail (out)"
label in4 "PMIC-1 ASIC 1.2V Rail (out)"
label temp1 "PMIC-1 Temp 1"
label temp2 "PMIC-1 Temp 2"
label power1 "PMIC-1 ASIC 0.8V VCORE Rail Pwr (out)"
label power2 "PMIC-1 ASIC 1.2V Rail Pwr (out)"
label curr1 "PMIC-1 ASIC 0.8V VCORE Rail Curr (out)"
label curr2 "PMIC-1 ASIC 1.2V Rail Curr (out)"
chip "tps53679-i2c-*-71"
label in1 "PMIC-2 PSU 12V Rail (in1)"
label in2 "PMIC-2 PSU 12V Rail (in2)"
label in3 "PMIC-2 ASIC 3.3V Rail (out)"
compute in3 (1.5)*@, @/(1.5)
label in4 "PMIC-2 ASIC 1.8V Rail (out)"
label temp1 "PMIC-2 Temp 1"
label temp2 "PMIC-2 Temp 2"
label power1 "PMIC-2 ASIC 3.3V Rail Pwr (out)"
label power2 "PMIC-2 ASIC 1.8V Rail Pwr (out)"
label curr1 "PMIC-2 ASIC 3.3V Rail Curr (out)"
label curr2 "PMIC-2 ASIC 1.8V Rail Curr (out)"
chip "mp2975-i2c-*-62"
label in1 "PMIC-1 PSU 12V Rail (in)"
label in2 "PMIC-1 ASIC 0.8V VCORE Rail (out)"
label in3 "PMIC-1 ASIC 1.2V Rail (out)"
ignore in4
label temp1 "PMIC-1 Temp 1"
label power1 "PMIC-1 PSU 12V Rail Pwr (in)"
label power2 "PMIC-1 ASIC 0.8V VCORE Rail Pwr (out)"
label power3 "PMIC-1 ASIC 1.2V Rail Pwr (out)"
label curr1 "PMIC-1 PSU 12V Rail Curr (in)"
label curr2 "PMIC-1 ASIC 0.8V VCORE Rail Curr (out)"
ignore curr3
ignore curr4
ignore curr5
ignore curr6
ignore curr7
ignore curr8
label curr9 "PMIC-1 ASIC 1.2V Rail Curr (out)"
ignore curr10
chip "mp2975-i2c-*-66"
label in1 "PMIC-2 PSU 12V Rail (in)"
label in2 "PMIC-2 ASIC 3.3V Rail (out)"
compute in2 (2)*@, @/(2)
label in3 "PMIC-2 ASIC 1.8V Rail (out)"
ignore in4
label temp1 "PMIC-2 Temp 1"
label power1 "PMIC-2 PSU 12V Rail Pwr (in)"
label power2 "PMIC-2 ASIC 3.3V Rail Pwr (out)"
label power3 "PMIC-2 ASIC 1.8V Rail Pwr (out)"
label curr1 "PMIC-2 PSU 12V Rail Curr (in)"
label curr2 "PMIC-2 ASIC 3.3V Rail Curr (out)"
ignore curr3
ignore curr4
label curr5 "PMIC-2 ASIC 1.8V Rail Curr (out)"
ignore curr6
ignore curr7
bus "i2c-15" "i2c-1-mux (chan_id 6)"
chip "tps53679-i2c-*-58"
label in1 "PMIC-3 PSU 12V Rail (in1)"
label in2 "PMIC-3 PSU 12V Rail (in2)"
label in3 "PMIC-3 COMEX 1.8V Rail (out)"
label in4 "PMIC-3 COMEX 1.05V Rail (out)"
label temp1 "PMIC-3 Temp 1"
label temp2 "PMIC-3 Temp 2"
label power1 "PMIC-3 COMEX 1.8V Rail Pwr (out)"
label power2 "PMIC-3 COMEX 1.05V Rail Pwr (out)"
label curr1 "PMIC-3 COMEX 1.8V Rail Curr (out)"
label curr2 "PMIC-3 COMEX 1.05V Rail Curr (out)"
chip "tps53679-i2c-*-61"
label in1 "PMIC-4 PSU 12V Rail (in1)"
label in2 "PMIC-4 PSU 12V Rail (in2)"
label in3 "PMIC-4 COMEX 1.2V Rail (out)"
ignore in4
label temp1 "PMIC-4 Temp 1"
label temp2 "PMIC-4 Temp 2"
label power1 "PMIC-4 COMEX 1.2V Rail Pwr (out)"
ignore power2
label curr1 "PMIC-4 COMEX 1.2V Rail Curr (out)"
ignore curr2
chip "mp2975-i2c-*-6a"
label in1 "PMIC-3 PSU 12V Rail (in1)"
label in2 "PMIC-3 COMEX 1.8V Rail (out)"
label in3 "PMIC-3 COMEX 1.05V Rail (out)"
label temp1 "PMIC-3 Temp 1"
label power1 "PMIC-3 COMEX 12V Rail Pwr (in)"
label power2 "PMIC-3 COMEX 1.8V Rail Pwr (out)"
label power3 "PMIC-3 COMEX 1.05V Rail Pwr (out)"
label curr1 "PMIC-3 COMEX 12V Rail Curr (in)"
label curr2 "PMIC-3 COMEX 1.8V Rail Curr (out)"
ignore curr3
ignore curr4
label curr5 "PMIC-3 COMEX 1.05V Rail Curr (out)"
ignore curr6
ignore curr7
chip "mp2975-i2c-*-61"
label in1 "PMIC-4 PSU 12V Rail (in1)"
label in2 "PMIC-4 COMEX 1.2V Rail (out)"
label temp1 "PMIC-4 Temp 1"
label power1 "PMIC-4 COMEX 12V Rail Pwr (in)"
label power2 "PMIC-4 COMEX 1.2V Rail Pwr (out)"
label curr1 "PMIC-4 COMEX 12V Rail Curr (in)"
label curr2 "PMIC-4 COMEX 1.2V Rail Curr (out)"
ignore curr3
# Power supplies
bus "i2c-4" "i2c-1-mux (chan_id 3)"
chip "dps460-i2c-*-58"
label in1 "PSU-1 220V Rail (in)"
ignore in2
label in3 "PSU-1 12V Rail (out)"
label fan1 "PSU-1 Fan 1"
ignore fan2
ignore fan3
label temp1 "PSU-1 Temp 1"
label temp2 "PSU-1 Temp 2"
label temp3 "PSU-1 Temp 3"
label power1 "PSU-1 220V Rail Pwr (in)"
label power2 "PSU-1 12V Rail Pwr (out)"
label curr1 "PSU-1 220V Rail Curr (in)"
label curr2 "PSU-1 12V Rail Curr (out)"
set in3_lcrit in3_crit * 0.662
set in3_min in3_crit * 0.745
set in3_max in3_crit * 0.952
chip "dps460-i2c-*-59"
label in1 "PSU-2 220V Rail (in)"
ignore in2
label in3 "PSU-2 12V Rail (out)"
label fan1 "PSU-2 Fan 1"
ignore fan2
ignore fan3
label temp1 "PSU-2 Temp 1"
label temp2 "PSU-2 Temp 2"
label temp3 "PSU-2 Temp 3"
label power1 "PSU-2 220V Rail Pwr (in)"
label power2 "PSU-2 12V Rail Pwr (out)"
label curr1 "PSU-2 220V Rail Curr (in)"
label curr2 "PSU-2 12V Rail Curr (out)"
set in3_lcrit in3_crit * 0.662
set in3_min in3_crit * 0.745
set in3_max in3_crit * 0.952
# Chassis fans
chip "mlxreg_fan-isa-*"
label fan1 "Chassis Fan Drawer-1 Tach 1"
label fan2 "Chassis Fan Drawer-1 Tach 2"
label fan3 "Chassis Fan Drawer-2 Tach 1"
label fan4 "Chassis Fan Drawer-2 Tach 2"
label fan5 "Chassis Fan Drawer-3 Tach 1"
label fan6 "Chassis Fan Drawer-3 Tach 2"
label fan7 "Chassis Fan Drawer-4 Tach 1"
label fan8 "Chassis Fan Drawer-4 Tach 2"
label fan9 "Chassis Fan Drawer-5 Tach 1"
label fan10 "Chassis Fan Drawer-5 Tach 2"
label fan11 "Chassis Fan Drawer-6 Tach 1"
label fan12 "Chassis Fan Drawer-6 Tach 2"
# Miscellaneous
chip "*-virtual-*"
ignore temp1