sonic-buildimage/device
Ying Xie 6a8ebef449
[Arista 7050cx3] add dummy MMU configurations for Arista-7050CX3-32S-C32 (#5798)
- Why I did it
On Arista-7050CX3-32S-C32, there are constant stream of errors like following.

Nov 3 21:56:24.415190 str2-7050cx3-acs-06 NOTICE swss#orchagent: :- registerInWdDb: No lossless TC found on port Ethernet68

Which causes:

loganalyzer to claim test failed.
leaving the system without MMU configuration. Which couldn't be good for any IO test.
- How I did it
Added these MMU configuraions are copied from another platform and guaranteed to be incorrect for hwsku Arista-7050CX3-32S-C32.

Adding them so that we have A MMU configuration and the system won't throw a whole bunch of errors and leave MMU unconfigured. The correct MMU configuration will come later.

This configuration is definitely not suitable for testing system performance or QoS behavior.

Signed-off-by: Ying Xie ying.xie@microsoft.com

- How to verify it
Test will have chance to pass. Ran a few test that would fail otherwise.
2020-11-09 13:27:36 -08:00
..
accton [device/accton] Remove the use of python pickle package (#5475) 2020-11-04 16:24:53 -08:00
alphanetworks In SAI 3.5 by default we are supporting 256 Group with 64 Memeber each. (#5400) 2020-09-22 11:21:12 -07:00
arista [Arista 7050cx3] add dummy MMU configurations for Arista-7050CX3-32S-C32 (#5798) 2020-11-09 13:27:36 -08:00
barefoot [barefoot][platform] Fix symlinks and syncd.conf for Newport in platform/ (#5585) 2020-10-12 14:16:01 -07:00
broadcom/x86_64-bcm_xlr-r0 In SAI 3.5 by default we are supporting 256 Group with 64 Memeber each. (#5400) 2020-09-22 11:21:12 -07:00
celestica [platform] Remove references to deprecated get_serial_number() method in Chassis class (#5649) 2020-10-17 22:00:14 -07:00
centec [centec]: Add centec arm64 architecture support for E530 (#4641) 2020-08-06 03:16:11 -07:00
cig [device] set the port state to default down for device cig and ingrasys s9130 and s9230 (#4618) 2020-05-21 02:14:51 -07:00
dell [devices]: DellEMC Z9264f buffer changes (#5429) 2020-10-29 01:52:24 -07:00
delta In SAI 3.5 by default we are supporting 256 Group with 64 Memeber each. (#5400) 2020-09-22 11:21:12 -07:00
facebook/x86_64-facebook_wedge100-r0 In SAI 3.5 by default we are supporting 256 Group with 64 Memeber each. (#5400) 2020-09-22 11:21:12 -07:00
ingrasys In SAI 3.5 by default we are supporting 256 Group with 64 Memeber each. (#5400) 2020-09-22 11:21:12 -07:00
inventec [Inventec] Add support for D6332 platform (#5304) 2020-10-20 11:37:16 -07:00
juniper In SAI 3.5 by default we are supporting 256 Group with 64 Memeber each. (#5400) 2020-09-22 11:21:12 -07:00
marvell [marvell] skip thermal control daemon for marvell device (#4703) 2020-06-09 09:20:51 -07:00
mellanox add pcied config files for mellanox platform (#5669) 2020-11-02 19:45:36 -08:00
mitac/x86_64-mitac_ly1200_b32h0_c3-r0 In SAI 3.5 by default we are supporting 256 Group with 64 Memeber each. (#5400) 2020-09-22 11:21:12 -07:00
pegatron/x86_64-pegatron_porsche-r0 [fix]: various minor fixes (#2246) 2018-11-10 13:39:30 -08:00
quanta In SAI 3.5 by default we are supporting 256 Group with 64 Memeber each. (#5400) 2020-09-22 11:21:12 -07:00
virtual/x86_64-kvm_x86_64-r0 Add gearbox phy device files and a new physyncd docker to support VS gearbox phy feature (#4851) 2020-09-25 08:32:44 -07:00
wnc/x86_64-wnc_osw1800-r0 [barefoot][build] Fixed BFN platform build failure (#3766) 2019-11-19 22:14:29 -08:00