Scripts which perform an installable binary image build for SONiC
This repository has been archived on 2025-03-20. You can view files and clone it, but cannot push or open issues or pull requests.
Go to file
Ying Xie 5e52b92d0a
[202205][linkmgrd][utilities][swss][swss-common][sairedis][platform-daemons] advance submodule head (#13755)
linkmgrd:
* e191338 2023-02-10 | Fix the warning of unused variables (#167) (HEAD -> 202205) [Longxiang Lyu]

utilities:
* 2c933b0a 2023-02-07 | [sai_failure_dump]Invoking dump during SAI failure (#2633) (HEAD -> 202205) [Sudharsan Dhamal Gopalarathnam]
* e949f318 2023-02-07 | [show] add support for gRPC show commands for `active-active` (#2629) [vdahiya12]
* 77723927 2023-01-30 | Fixed admin state config CLI for Backport interfaces (#2557) [anamehra]
* 32b1d4d6 2023-02-01 | [masic support] 'show run bgp' support for multi-asic (#2427) [wenyiz2021]
* a2252d8a 2022-10-11 | Filter port invalid MTU configuration (#2378) [pettershao-ragilenetworks]
* 0ffb4b6a 2023-02-09 | Add Transceiver PM basic CLI support to show output from TRANSCEIVER_PM table for ZR (#2655) (github/202205) [longhuan-cisco]
* 496a0774 2023-02-09 | Add asic id for linecards so "show fabric counters queue/port" can work for single chip systems (#2656) [jfeng-arista]
* 2591e8b5 2023-02-03 | multi asic support for show queue counter (#2647) [zhixzhu]

swss:
* e0373a4 2023-02-07 | [autoneg]Fixing adv interface types to be set when AN is disabled (#2638) (HEAD -> 202205, github/202205) [Sudharsan Dhamal Gopalarathnam]
* 62a09a0 2023-02-09 | [sai_failure_dump]Invoking dump during SAI failure (#2644) (#2661) [Sudharsan Dhamal Gopalarathnam]
* 076f63e 2023-02-08 | [202205] Revert "Revert "[voq][chassis]Add show fabric counters port/queue commands (#2522)" (#2612)" (#2655) [kenneth-arista]
* a35e074 2023-02-06 | [202205][voq][chassis] Remove created ports from the default vlan. (#2651) [arista-nwolfe]

swss-common:
* b9d4284 2023-02-08 | [202205] Fix epoll and socket resource leak issue. (#651) (#741) (github/202205) [Kevin Petremann]

sairedis:
* 9d8e731 2023-02-08 | [Mellanox] Enable DSCP remapping by using SAI attribute (#1188) (HEAD -> 202205, github/202205) [Stephen Sun]
* 272a8bd 2023-02-10 | Fixing race condition for rif counters #1136 (#1202) [Suman Kumar]
* 211365a 2023-02-08 | [202205][submodule][SAI]Advance SAI header (#1207) [Richard.Yu]
* 939c14b 2023-02-08 | [Submodule][upgrade]Upgrade SAI submodule (#1203) [Richard.Yu]

platform-daemons:
* e5ccd40 2022-10-03 | [ycabled] fix naming error for error condition for CLI handling (#302) (HEAD -> 202205, github/202205) [vdahiya12]
* cdd354d 2022-09-29 | [ycabled] add some exception catching logic to some vendor specific API's (#301) [vdahiya12]
* cf58c08 2023-02-01 | Chassisd do an explicit stop of the config_manager (#328) (#336) [judyjoseph]

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
2023-02-10 09:17:59 -08:00
.azure-pipelines [ci] Kill hanged docker build process to avoid build timeout issue. (#13729) 2023-02-10 09:14:28 -08:00
.github [action] Keep 'request for xxx branch' label when finished auto-cherry-pick. (#13107) 2023-01-06 02:36:57 +08:00
device [Mellanox] Support DSCP remapping in dual ToR topo on T0 switch (#12605) (#13745) 2023-02-10 09:16:56 -08:00
dockers [dhcp-relay] Add support for dhcp_relay config cli (#13373) (#13584) 2023-02-02 06:30:53 +08:00
files [Mellanox] Support DSCP remapping in dual ToR topo on T0 switch (#12605) (#13745) 2023-02-10 09:16:56 -08:00
installer [202205] Update Linux kernel from 5.10.103 to 5.10.140 (#12660) #12874 2022-12-01 09:25:40 -08:00
platform Update BRCM SAI version 7.1.32.4-1 (#13715) 2023-02-10 09:13:04 -08:00
rules [Security][202205] Upgrade the openssl version to 1.1.1n-0+deb11u4+fips #13737 (#13759) 2023-02-10 12:01:22 +00:00
scripts [Build] Support j2 template for debian sources (#12557) (#13185) 2022-12-30 09:47:33 +08:00
sonic-slave-bullseye [build] Fix sonic-host-services dependency deepdiff version issue (#13334) 2023-01-12 13:18:11 +08:00
sonic-slave-buster [Build] Support j2 template for debian sources (#12557) (#13185) 2022-12-30 09:47:33 +08:00
sonic-slave-jessie Add a config variable to override default container registry instead of dockerhub. (#10166) 2022-03-14 18:09:20 +08:00
sonic-slave-stretch [Build] Support j2 template for debian sources (#12557) (#13185) 2022-12-30 09:47:33 +08:00
src [202205][linkmgrd][utilities][swss][swss-common][sairedis][platform-daemons] advance submodule head (#13755) 2023-02-10 09:17:59 -08:00
.artifactignore [ci] Archive compiled Debian packages and Python wheels (#6650) 2021-02-02 23:42:03 -08:00
.gitignore [Build] Support j2 template for debian sources (#12557) (#13185) 2022-12-30 09:47:33 +08:00
.gitmodules [submodule] Update submodule HEAD for sonic-mgmt-framework and sonic-telemetry (#13112) 2023-02-06 19:32:26 -08:00
azure-pipelines.yml [202205][TestbedV2] Add multi-asic test jobs using TestbedV2. (#12722) 2023-01-30 10:25:14 +08:00
build_debian.sh Clear DNS configuration received from DHCP during networking reconfiguration in Linux. (#13516) (#13695) 2023-02-10 09:11:05 -08:00
build_debug_docker_j2.sh [sonic-buildimage] Fix build issue for docker-dhcp-relay-dbg.gz. Issue (#4136) 2020-02-10 17:16:42 -08:00
build_docker.sh Split script: push_docker.sh (#89) 2016-12-01 02:18:59 -08:00
build_image.sh Add BUILD_DATE to SWI (#11915) 2022-10-25 20:37:00 +00:00
check_install.py Fix vs check install login timeout issue (#11727) 2022-09-01 00:10:02 +00:00
functions.sh [build] When generating image version, handle case where current commit has no reachable tags (#2506) 2019-01-31 14:48:48 -08:00
get_docker-base.sh Add mkdir if the target dir does not exist (#130) 2016-12-16 02:19:15 +00:00
install_sonic.py [build] Increase timeout value when installing SONiC image on kvm (#11191) 2022-09-02 15:38:45 +00:00
LICENSE updating readme, formatting in license 2016-03-09 17:39:34 +00:00
MAINTAINERS Adding license and maintainers 2016-03-08 19:10:18 -08:00
Makefile [build] Add retry when make SONiC image to improve success rate. (#12325) (#13128) 2022-12-23 18:51:23 +08:00
Makefile.cache [build] Add version files to docker image dependencies (#11195) 2022-06-22 14:12:25 +08:00
Makefile.work Add k8s support feature set and Add platform label for scheduler usage (#12997) (#13351) 2023-01-13 09:55:51 +08:00
onie-image-arm64.conf New sonic-buildimage images for Broadcom DNX ASIC family. (#7598) 2021-06-22 11:12:22 -07:00
onie-image-armhf.conf New sonic-buildimage images for Broadcom DNX ASIC family. (#7598) 2021-06-22 11:12:22 -07:00
onie-image.conf [vs][multi-asic]: Add support to build multi-asic vs images (#8270) 2021-09-01 17:28:13 -07:00
onie-mk-demo.sh Support SONiC OpenSSL FIPS 140-3 based on SymCrypt engine (#9573) 2022-05-06 07:21:30 +08:00
push_docker.sh [ci] Support multi tags when pushing docker image (#10771) 2022-05-09 16:43:21 +08:00
README.buildsystem.md [doc]: Fix typos in documents (#7296) 2021-04-14 18:27:24 -07:00
README.md [doc]: Update build instructions (#8470) 2021-08-25 04:35:31 -07:00
slave.mk [build] Check if patches are applied before applying patches (#13386) (#13435) 2023-01-20 10:19:53 -08:00
ThirdPartyLicenses.txt [TACACS+] Add Bash TACACS+ plugin for per-command authorization. (#8715) 2021-11-13 09:57:30 +08:00
update_screen.sh [build]: Added support for cache status on the build output (#5564) 2020-10-09 02:49:20 -07:00

static analysis:

Total alerts Language grade: Python

master builds:

Barefoot Broadcom Centec Centec(arm64) Innovium Mellanox Marvell(armhf) Nephos P4 VS

202012 builds:

Barefoot Broadcom Centec Centec(arm64) Innovium Marvell(armhf) Mellanox Nephos VS

201911 builds:

Barefoot Broadcom Innovium Mellanox Nephos VS

201811 builds:

Broadcom Mellanox Innovium Nephos VS

201807 builds:

Broadcom Barefoot

201803 builds:

Broadcom Nephos Marvell Mellanox

sonic-buildimage

Build SONiC Switch Images

Description

Following is the instruction on how to build an (ONIE) compatible network operating system (NOS) installer image for network switches, and also how to build docker images running inside the NOS. Note that SONiC image are build per ASIC platform. Switches using the same ASIC platform share a common image. For a list of supported switches and ASIC, please refer to this list

Hardware

Any server can be a build image server as long as it has:

  • Multiple cores to increase build speed
  • Plenty of RAM (less than 8 GiB is likely to cause issues)
  • 300G of free disk space

A good choice of OS for building SONiC is currently Ubuntu 20.04.

Prerequisites

  • Install pip and jinja in host build machine, execute below commands if j2/j2cli is not available:
sudo apt install -y python3-pip
sudo pip3 install j2cli
  • Install Docker and configure your system to allow running the 'docker' command without 'sudo':
    • Add current user to the docker group: sudo gpasswd -a ${USER} docker
    • Log out and log back in so that your group membership is re-evaluated

Clone or fetch the code repository with all git submodules

To clone the code repository recursively, assuming git version 1.9 or newer:

git clone https://github.com/Azure/sonic-buildimage.git

Usage

To build SONiC installer image and docker images, run the following commands:

# Ensure the 'overlay' module is loaded on your development system
sudo modprobe overlay

# Enter the source directory
cd sonic-buildimage

# (Optional) Checkout a specific branch. By default, it uses master branch. For example, to checkout the branch 201911, use "git checkout 201911"
git checkout [branch_name]

# Execute make init once after cloning the repo, or after fetching remote repo with submodule updates
make init

# Execute make configure once to configure ASIC
make configure PLATFORM=[ASIC_VENDOR]

# Build SONiC image with 4 jobs in parallel.
# Note: You can set this higher, but 4 is a good number for most cases
# and is well-tested.
make SONIC_BUILD_JOBS=4 all

The supported ASIC vendors are:

  • PLATFORM=broadcom
  • PLATFORM=marvell
  • PLATFORM=mellanox
  • PLATFORM=cavium
  • PLATFORM=centec
  • PLATFORM=nephos
  • PLATFORM=innovium
  • PLATFORM=p4
  • PLATFORM=vs

Usage for ARM Architecture

To build Arm32 bit for (ARMHF) platform ARM build has dependency in docker version 18, if docker version is 19, downgrade to 18 as below sudo apt-get install --allow-downgrades -y docker-ce=5:18.09.0~3-0~ubuntu-xenial sudo apt-get install --allow-downgrades -y docker-ce-cli=5:18.09.0~3-0~ubuntu-xenial

# Execute make configure once to configure ASIC and ARCH

make configure PLATFORM=[ASIC_VENDOR] PLATFORM_ARCH=armhf

make target/sonic-[ASIC_VENDER]-armhf.bin

# example:

make configure PLATFORM=marvell-armhf PLATFORM_ARCH=armhf

make target/sonic-marvell-armhf.bin

To build Arm64 bit for platform

# Execute make configure once to configure ASIC and ARCH

make configure PLATFORM=[ASIC_VENDOR] PLATFORM_ARCH=arm64

# example:

make configure PLATFORM=marvell-arm64 PLATFORM_ARCH=arm64

NOTE:

  • Recommend reserving at least 100G free space to build one platform with a single job. The build process will use more disk if you are setting SONIC_BUILD_JOBS to more than 1.

  • If Docker's workspace folder, /var/lib/docker, resides on a partition without sufficient free space, you may encounter an error like the following during a Docker container build job:

    /usr/bin/tar: /path/to/sonic-buildimage/<some_file>: Cannot write: No space left on device

    The solution is to move the directory to a partition with more free space.

  • Use http_proxy=[your_proxy] https_proxy=[your_proxy] no_proxy=[your_no_proxy] make to enable http(s) proxy in the build process.

  • Add your user account to docker group and use your user account to make. root or sudo are not supported.

The SONiC installer contains all docker images needed. SONiC uses one image for all devices of a same ASIC vendor.

For Broadcom ASIC, we build ONIE and EOS image. EOS image is used for Arista devices, ONIE image is used for all other Broadcom ASIC based devices.

make configure PLATFORM=broadcom
# build debian stretch required targets
BLDENV=stretch make stretch
# build ONIE image
make target/sonic-broadcom.bin
# build EOS image
make target/sonic-aboot-broadcom.swi

You may find the rules/config file useful. It contains configuration options for the build process, like adding more verbosity or showing dependencies, username and password for base image etc.

Every docker image is built and saved to target/ directory. So, for instance, to build only docker-database, execute:

make target/docker-database.gz

Same goes for debian packages, which are under target/debs/:

make target/debs/swss_1.0.0_amd64.deb

Every target has a clean target, so in order to clean swss, execute:

make target/debs/swss_1.0.0_amd64.deb-clean

It is recommended to use clean targets to clean all packages that are built together, like dev packages for instance. In order to be more familiar with build process and make some changes to it, it is recommended to read this short Documentation.

Build debug dockers and debug SONiC installer image:

SONiC build system supports building dockers and ONIE-image with debug tools and debug symbols, to help with live & core debugging. For details refer to (SONiC Buildimage Guide).

SAI Version

Please refer to SONiC roadmap on the SAI version for each SONiC release.

Notes:

  • If you are running make for the first time, a sonic-slave-${USER} docker image will be built automatically. This may take a while, but it is a one-time action, so please be patient.

  • The root user account is disabled. However, the created user can sudo.

  • The target directory is ./target, containing the NOS installer image and docker images.

    • sonic-generic.bin: SONiC switch installer image (ONIE compatible)
    • sonic-aboot.bin: SONiC switch installer image (Aboot compatible)
    • docker-base.gz: base docker image where other docker images are built from, only used in build process (gzip tar archive)
    • docker-database.gz: docker image for in-memory key-value store, used as inter-process communication (gzip tar archive)
    • docker-fpm.gz: docker image for quagga with fpm module enabled (gzip tar archive)
    • docker-orchagent.gz: docker image for SWitch State Service (SWSS) (gzip tar archive)
    • docker-syncd-brcm.gz: docker image for the daemon to sync database and Broadcom switch ASIC (gzip tar archive)
    • docker-syncd-cavm.gz: docker image for the daemon to sync database and Cavium switch ASIC (gzip tar archive)
    • docker-syncd-mlnx.gz: docker image for the daemon to sync database and Mellanox switch ASIC (gzip tar archive)
    • docker-syncd-nephos.gz: docker image for the daemon to sync database and Nephos switch ASIC (gzip tar archive)
    • docker-syncd-invm.gz: docker image for the daemon to sync database and Innovium switch ASIC (gzip tar archive)
    • docker-sonic-p4.gz: docker image for all-in-one for p4 software switch (gzip tar archive)
    • docker-sonic-vs.gz: docker image for all-in-one for software virtual switch (gzip tar archive)
    • docker-sonic-mgmt.gz: docker image for managing, configuring and monitoring SONiC (gzip tar archive)

Contribution Guide

All contributors must sign a contribution license agreement before contributions can be accepted. Contact sonic-cla-agreements@microsoft.com.

GitHub Workflow

We're following basic GitHub Flow. If you have no idea what we're talking about, check out GitHub's official guide. Note that merge is only performed by the repository maintainer.

Guide for performing commits:

  • Isolate each commit to one component/bugfix/issue/feature
  • Use a standard commit message format:
[component/folder touched]: Description intent of your changes

[List of changes]

Signed-off-by: Your Name your@email.com

For example:

swss-common: Stabilize the ConsumerTable

* Fixing autoreconf
* Fixing unit-tests by adding checkers and initialize the DB before start
* Adding the ability to select from multiple channels
* Health-Monitor - The idea of the patch is that if something went wrong with the notification channel,
  we will have the option to know about it (Query the LLEN table length).

  Signed-off-by: user@dev.null
  • Each developer should fork this repository and add the team as a Contributor
  • Push your changes to your private fork and do "pull-request" to this repository
  • Use a pull request to do code review
  • Use issues to keep track of what is going on

This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact opencode@microsoft.com with any additional questions or comments.