56a689cf30
Starting with BRCM SAI 4.3.1.5 we see the following :ethtool not fount" error in syslog during boot up: ``` Jan 27 07:36:14.712472 str-s6100-acs-1 INFO syncd#/supervisord: syncd sh: 1: Jan 27 07:36:14.712844 str-s6100-acs-1 INFO syncd#/supervisord: syncd ethtool: not found Jan 27 07:36:14.713228 str-s6100-acs-1 INFO syncd#/supervisord: syncd #015 Jan 27 07:36:14.713840 str-s6100-acs-1 INFO syncd#syncd: [0] SAI_API_HOSTIF:_brcm_sai_hostif_speed_set:11894 cmd ethtool -s Ethernet39 speed 40000 rc:32512 Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- setHostIntfsOperStatus: Set operation status DOWN to host interface Ethernet39 Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- initPort: Initialized port Ethernet39 Jan 27 07:36:14.717204 str-s6100-acs-1 NOTICE swss#orchagent: :- initializePort: Initializing port alias:Ethernet36 pid:1000000000040 Jan 27 07:36:14.726793 str-s6100-acs-1 NOTICE swss#portsyncd: :- onMsg: nlmsg type:16 key:Ethernet36 admin:0 oper:0 addr:4c:76:25:f5:48:80 ifindex:75 master:0 Jan 27 07:36:14.727967 str-s6100-acs-1 NOTICE swss#portsyncd: :- onMsg: Publish Ethernet36(ok) to state db Jan 27 07:36:14.729331 str-s6100-acs-1 NOTICE swss#orchagent: :- addHostIntfs: Create host interface for port Ethernet36 Jan 27 07:36:14.752398 str-s6100-acs-1 INFO syncd#/supervisord: syncd sh: 1: ethtool: not found#015 Jan 27 07:36:14.752689 str-s6100-acs-1 INFO syncd#syncd: [0] SAI_API_HOSTIF:_brcm_sai_hostif_speed_set:11894 cmd ethtool -s Ethernet36 speed 40000 rc:32512 Jan 27 07:36:14.756050 str-s6100-acs-1 NOTICE swss#orchagent: :- setHostIntfsOperStatus: Set operation status DOWN to host interface Ethernet36 Jan 27 07:36:14.757585 str-s6100-acs-1 NOTICE swss#orchagent: :- initPort: Initialized port Ethernet36 ``` It seems that starting with BRCM SAI 4.2.1.5 syncd is using ethtool to set the host interface speed and since this ethtool was not part of the syncd Docker, we observe these "ethtool not found" issue.
39 lines
1.1 KiB
Django/Jinja
Executable File
39 lines
1.1 KiB
Django/Jinja
Executable File
{% from "dockers/dockerfile-macros.j2" import install_debian_packages %}
|
|
FROM docker-config-engine-buster
|
|
|
|
ARG docker_container_name
|
|
RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf
|
|
|
|
## Make apt-get non-interactive
|
|
ENV DEBIAN_FRONTEND=noninteractive
|
|
|
|
RUN apt-get update
|
|
|
|
COPY \
|
|
{% for deb in docker_syncd_brcm_debs.split(' ') -%}
|
|
debs/{{ deb }}{{' '}}
|
|
{%- endfor -%}
|
|
debs/
|
|
|
|
# Install locally-built Debian packages and implicitly install their dependencies
|
|
{{ install_debian_packages(docker_syncd_brcm_debs.split(' ')) }}
|
|
|
|
## TODO: add kmod into Depends
|
|
RUN apt-get install -yf kmod
|
|
|
|
## BRCM uses ethtool to set host interface speed
|
|
RUN apt-get install -y ethtool
|
|
|
|
COPY ["files/dsserve", "files/bcmcmd", "start.sh", "start_led.sh", "bcmsh", "/usr/bin/"]
|
|
RUN chmod +x /usr/bin/dsserve /usr/bin/bcmcmd
|
|
|
|
COPY ["supervisord.conf", "/etc/supervisor/conf.d/"]
|
|
COPY ["files/supervisor-proc-exit-listener", "/usr/bin"]
|
|
COPY ["critical_processes", "/etc/supervisor/"]
|
|
|
|
## Clean up
|
|
RUN apt-get clean -y; apt-get autoclean -y; apt-get autoremove -y
|
|
RUN rm -rf /debs
|
|
|
|
ENTRYPOINT ["/usr/local/bin/supervisord"]
|