6c0da4bcf0
What I did: Updated Jinja Template to enable BGP Graceful Restart based on device role. By default it will be enable only if the device role type is TorRouter. Why I did:- By default FRR is configured in Graceful Helper mode. Graceful Restart is needed on T0/TorRouter only since the device can go for warm-reboot. For T1/LeafRouter it need to be in Helper mode only
139 lines
5.5 KiB
Django/Jinja
139 lines
5.5 KiB
Django/Jinja
{% from "common/functions.conf.j2" import get_ipv4_loopback_address, get_ipv6_loopback_address, get_vnet_interfaces %}
|
|
!
|
|
! template: bgpd/bgpd.main.conf.j2
|
|
!
|
|
! bgp multiple-instance
|
|
!
|
|
! BGP configuration
|
|
!
|
|
! TSA configuration
|
|
!
|
|
ip prefix-list PL_LoopbackV4 permit {{ get_ipv4_loopback_address(LOOPBACK_INTERFACE, "Loopback0") | ip }}/32
|
|
!
|
|
{% if get_ipv6_loopback_address(LOOPBACK_INTERFACE, "Loopback0") != 'None' %}
|
|
ipv6 prefix-list PL_LoopbackV6 permit {{ get_ipv6_loopback_address(LOOPBACK_INTERFACE, "Loopback0") | replace('/128', '/64') | ip_network }}/64
|
|
{% endif %}
|
|
!
|
|
{% if VLAN_INTERFACE is defined %}
|
|
{% set vnet_intfs = get_vnet_interfaces(VLAN_INTERFACE) %}
|
|
{% endif %}
|
|
{% for (name, prefix) in VLAN_INTERFACE|pfx_filter %}
|
|
{% if prefix | ipv4 and name not in vnet_intfs %}
|
|
ip prefix-list LOCAL_VLAN_IPV4_PREFIX seq {{ loop.index * 5 }} permit {{ prefix | ip_network }}/{{ prefix | prefixlen }}
|
|
!
|
|
{% endif %}
|
|
{% endfor %}
|
|
{% for (name, prefix) in VLAN_INTERFACE|pfx_filter %}
|
|
{% if prefix | ipv6 and name not in vnet_intfs %}
|
|
ipv6 prefix-list LOCAL_VLAN_IPV6_PREFIX seq {{ loop.index * 5 }} permit {{ prefix | ip_network }}/{{ prefix | prefixlen }}
|
|
!
|
|
{% endif %}
|
|
{% endfor %}
|
|
!
|
|
{% if DEVICE_METADATA['localhost']['sub_role'] == 'FrontEnd' or DEVICE_METADATA['localhost']['sub_role'] == 'BackEnd' %}
|
|
{% set multi_asic = True %}
|
|
{% endif %}
|
|
{% if multi_asic is defined or DEVICE_METADATA['localhost']['switch_type'] == 'voq' or DEVICE_METADATA['localhost']['switch_type'] == 'chassis-packet' %}
|
|
ip prefix-list V4_P2P_IP permit 0.0.0.0/0 ge 31 le 31
|
|
!
|
|
ipv6 prefix-list V6_P2P_IP permit ::/0 ge 126 le 126
|
|
!
|
|
route-map V4_CONNECTED_ROUTES permit 10
|
|
match ip address prefix-list V4_P2P_IP
|
|
call HIDE_INTERNAL
|
|
!
|
|
route-map V6_CONNECTED_ROUTES permit 10
|
|
match ipv6 address prefix-list V6_P2P_IP
|
|
call HIDE_INTERNAL
|
|
!
|
|
route-map HIDE_INTERNAL permit 10
|
|
set community no-export
|
|
{% if constants.bgp.peers is defined and constants.bgp.peers.internal is defined and constants.bgp.peers.internal.community is defined %}
|
|
on-match next
|
|
route-map HIDE_INTERNAL permit 20
|
|
set community {{ constants.bgp.peers.internal.community }} additive
|
|
{% endif %}
|
|
!
|
|
{% endif %}
|
|
!
|
|
router bgp {{ DEVICE_METADATA['localhost']['bgp_asn'] }}
|
|
!
|
|
{% block bgp_init %}
|
|
bgp log-neighbor-changes
|
|
no bgp default ipv4-unicast
|
|
no bgp ebgp-requires-policy
|
|
!
|
|
{% if constants.bgp.multipath_relax.enabled is defined and constants.bgp.multipath_relax.enabled %}
|
|
bgp bestpath as-path multipath-relax
|
|
{% endif %}
|
|
!
|
|
{% if constants.bgp.graceful_restart.enabled is defined and constants.bgp.graceful_restart.enabled and DEVICE_METADATA['localhost']['type'] == 'ToRRouter' %}
|
|
bgp graceful-restart restart-time {{ constants.bgp.graceful_restart.restart_time | default(240) }}
|
|
bgp graceful-restart
|
|
bgp graceful-restart preserve-fw-state
|
|
bgp graceful-restart select-defer-time {{ constants.bgp.graceful_restart.select_defer_time | default(45) }}
|
|
{% endif %}
|
|
!
|
|
{# set router-id #}
|
|
{% if DEVICE_METADATA['localhost']['sub_role'] == 'BackEnd' or DEVICE_METADATA['localhost']['switch_type'] == 'voq' or DEVICE_METADATA['localhost']['switch_type'] == 'chassis-packet' %}
|
|
bgp router-id {{ get_ipv4_loopback_address(LOOPBACK_INTERFACE, "Loopback4096") | ip }}
|
|
{% else %}
|
|
bgp router-id {{ get_ipv4_loopback_address(LOOPBACK_INTERFACE, "Loopback0") | ip }}
|
|
{% endif %}
|
|
!
|
|
{# advertise loopback #}
|
|
network {{ get_ipv4_loopback_address(LOOPBACK_INTERFACE, "Loopback0") | ip }}/32
|
|
{% if ((multi_asic is defined and DEVICE_METADATA['localhost']['switch_type'] != 'chassis-packet') or (DEVICE_METADATA['localhost']['switch_type'] == 'voq')) %}
|
|
network {{ get_ipv4_loopback_address(LOOPBACK_INTERFACE, "Loopback4096") | ip }}/32 route-map HIDE_INTERNAL
|
|
{% endif %}
|
|
!
|
|
{% if get_ipv6_loopback_address(LOOPBACK_INTERFACE, "Loopback0") != 'None' %}
|
|
address-family ipv6
|
|
network {{ get_ipv6_loopback_address(LOOPBACK_INTERFACE, "Loopback0") | ip }}/64
|
|
exit-address-family
|
|
{% endif %}
|
|
{% if ((multi_asic is defined and DEVICE_METADATA['localhost']['switch_type'] != 'chassis-packet') or (DEVICE_METADATA['localhost']['switch_type'] == 'voq')) %}
|
|
{% if get_ipv6_loopback_address(LOOPBACK_INTERFACE, "Loopback4096") != 'None' %}
|
|
address-family ipv6
|
|
network {{ get_ipv6_loopback_address(LOOPBACK_INTERFACE, "Loopback4096") | ip }}/128 route-map HIDE_INTERNAL
|
|
exit-address-family
|
|
{% endif %}
|
|
{% endif %}
|
|
{% endblock bgp_init %}
|
|
!
|
|
{% block vlan_advertisement %}
|
|
{% for (name, prefix) in VLAN_INTERFACE|pfx_filter %}
|
|
{% if prefix | ipv4 and name not in vnet_intfs %}
|
|
network {{ prefix }}
|
|
{% elif prefix | ipv6 and name not in vnet_intfs %}
|
|
address-family ipv6
|
|
network {{ prefix }}
|
|
exit-address-family
|
|
{% endif %}
|
|
{% endfor %}
|
|
{% endblock vlan_advertisement %}
|
|
!
|
|
!
|
|
{% if DEVICE_METADATA['localhost']['sub_role'] == 'FrontEnd' or DEVICE_METADATA['localhost']['switch_type'] == 'voq' or DEVICE_METADATA['localhost']['switch_type'] == 'chassis-packet' %}
|
|
address-family ipv4
|
|
redistribute connected route-map V4_CONNECTED_ROUTES
|
|
exit-address-family
|
|
address-family ipv6
|
|
redistribute connected route-map V6_CONNECTED_ROUTES
|
|
exit-address-family
|
|
{% endif %}
|
|
!
|
|
{% if constants.bgp.maximum_paths.enabled is defined and constants.bgp.maximum_paths.enabled %}
|
|
{% block maximum_paths %}
|
|
address-family ipv4
|
|
maximum-paths {{ constants.bgp.maximum_paths.ipv4 | default(64) }}
|
|
exit-address-family
|
|
address-family ipv6
|
|
maximum-paths {{ constants.bgp.maximum_paths.ipv6 | default(64) }}
|
|
exit-address-family
|
|
{% endblock maximum_paths %}
|
|
{% endif %}
|
|
!
|
|
! end of template: bgpd/bgpd.main.conf.j2
|
|
!
|