sonic-buildimage/platform/mellanox/docker-syncd-mlnx/ecmp_calculator

SONiC ECMP Calculator

Description

An equal cost multipath (ECMP) is formed when routing table contains multiple next hop addresses for the same destination IP address. ECMP will load balance the outbound traffic between the IP interfaces. The purpose of ECMP calculator is to calculate which IP interface ECMP will choose and return the physical interface packet will egress from. Packet is defined by a JSON file given as an argument to the tool.

Usage notes

1. ECMP calculator performs its calculations based on the current operational state of the router. In order to calculate the egress port, it fetches routes from HW. Routes exist in HW only for next hops with a resolved ARP.
2. ECMP calculator supports only routed packets.

• IPv4/IPv6 TCP/UDP packets
• IPinIP and VXLAN encapsulated packets

3. Changes done in the packet classification (e.g. ACL, PBR) are not taken into consideration during calculation.

Command line interface

1. User shall provide the following input parameters:

• JSON file describing a packet
• Ingress port (e.g. "Ethernet0", must pe a physical interface)
• Debug option for debug purposes (optional)
• VRF name (optional)

2. Usage example:

$ show ip ecmp-egress-port --packet /tmp/packet.json --ingress-port Ethernet0 --vrf Vrf_red --debug
Egress port: Ethernet4

ECMP calculator is a vendor specific tool. If tool was not implemented and CLI command is being called, the following message will be returned to user:

$ show ip ecmp-egress-port --packet /tmp/packet.json --ingress-port Ethernet0 --vrf Vrf_red --debug
ECMP calculator is not available in this image

Packet JSON

1. Numbers in packet JSON must be in base-ten.
2. For packets with single header, outer header shall be provided.
3. The following table defines the structure of a packet JSON file.

ecmp_hash
	packet_info				object
		outer			object
			layer2		object
				smac	string
				dmac	string
				ethertype	number	16bits, needed for IPv4 or IPv6 packet
				outer_vid	number	12bits
				outer_pcp	number	3bits
				outer_dei	number	1bits
				inner_vid	number	QinQ
				inner_pcp	number	QinQ
				inner_dei	number	QinQ
			ipv4		object
				sip	string
				dip	string
				proto	number	8bits
				dscp	number	6bits
				ecn	number	2bits
				mflag	number	1bit
				l3_length	number	16bits
			ipv6		object	should not co-exist with ipv4 field
				sip	string
				dip	string
				mflag	number	1bit
				next_header	number	8bits
				dscp	number	6bits
				ecn	number	2bits
				l3_length	number	16bits
				flow_label	number	20bits
			tcp_udp		object
				sport	number	16bits
				dport	number	16bits
			vxlan_nvgre		object
				vni	number	24bits
		inner			object	overlay
			layer2		object
				smac	string
				dmac	string
				ethertype	number	16bits
			ipv4		object
				sip	string
				dip	string
				mflag	number	1bit
				proto	number	8bits
			ipv6		object	should not co-exist with ipv4 field
				sip	string
				dip	string
				mflag	number	1bit
				next_header	number	8bits
				flow_label	number	20bits
			tcp_udp		object
				sport	number	16bits
				dport	number	16bits

4. Packet JSON file example

{
    "packet_info": {
        "outer": {
            "ipv4": {
                "sip": "10.10.10.10",
                "dip": "3.3.3.3",
                "proto": 17
            },                  
            "layer2": {
                "smac": "24:8a:07:1e:82:ed",
                "dmac": "1c:34:da:1c:a1:00",
                "ethertype": 2048
            },                  
            "tcp_udp": {
                "sport": 100,
                "dport": 4789
            },
            "vxlan_nvgre": {
                "vni": 100
            }       
        },
        "inner": {
            "layer2": {
                "smac": "11:11:11:11:11:11",
                "dmac": "22:22:22:22:22:22",
                "ethertype": 2048
            },
            "ipv4": {
                "sip": "1.1.1.1",
                "dip": "2.2.2.3",
                "proto": 17,
                "mflag": 0
            },
            "tcp_udp": {
                "sport": 100,
                "dport": 200 
            }
        }       
    }
}